This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent Technologies

While cleaning the ICP-MS routinely can prevent issues, keeping the ICPMS cleaned during the analysis is equally, if not more, important.
In this webinar, we will discuss ways to prevent cross contamination and carryover, as well as tips and trick on analyzing.
 
<blockquote>
Presenter: Yan Cheung, PhD (Applications Chemist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: New Year resolution for my ICP-MS: I will keep my ICP-MS analysis free from contaminants

New Year resolution for my ICP-MS: I will keep my ICP-MS analysis free from contaminants

In this webinar, we will discuss ways to prevent cross contamination and carryover, as well as tips and trick on analyzing.

I will keep my ICP-MS analysis free from contaminants

In this webinar, we will address the most asked questions from customers, as well as important questions to ask when evaluating an ICP-MS. But don’t let us stop you from bringing your pressing questions!
We will be sure to leave plenty of time for Q&amp;A as well!
<blockquote>
Presenter: Yan Cheung, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: Got ICP-MS questions? We got answers!

Got ICP-MS questions? We got answers!

We will address the most asked questions from customers, as well as important questions to ask when evaluating an ICP-MS.

Today the vast majority of ICPMS analysis is performed in solution mode, however, very few of the samples analyzed are liquids to start with and have to be acid-digested and diluted before analysis can take place.
Laser ablation has been developed over nearly three decades to become a mature technique that provides the opportunity to sample rapidly directly from the solid material with little-to-no sample preparation. Like solution analysis laser ablation is capable of high-throughput automation of hundreds of samples per day, but unlike solution analysis it can also create micron-scale images of the distribution of elements through a sample. No other sample technique has such range of capability.
In this webinar we will set the stage for an open Q&amp;A by introducing the benefits of laser ablation for many types of elemental analysis.
<blockquote>
Presenter: Rob Hutchinson, PhD (Senior Product Specialist, Elemental Scientific Lasers)
</blockquote>
<blockquote>
Rob trained as an analytical chemist and did his PhD in bio-imaging via LA-ICP-MS at the University of Sheffield in the UK. Since 2005 he has been the senior global application specialist in laser ablation at Elemental Scientific (formerly New Wave Research).
</blockquote>
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, nutraceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking and relaxing at the beach. Craig obtained a bachelor of science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>

Agilent Technologies: Laser ablation – a mature technique for analysis of solid samples

Laser ablation – a mature technique for analysis of solid samples

In this webinar we will set the stage for an open Q&A by introducing the benefits of laser ablation for many types of elemental analysis.

Laser ablation – technique for analysis of solid samples

The US Government initiative – also known as the CHIPS Act – is creating novel opportunities for companies in the semiconductor supply chain. As a result of this initiative companies like Intel, TSMC, Micron, Qualcomm and others have announced aggressive plans to expand operations in the US. To maintain uninterrupted operations, they will need cleanroom supplies, gowns, tools, and equipment. A critical requirement will be ultrapure chemicals like solvents, photoresists, acids, bases and water. These identified needs offer great opportunity for existing laboratories to respond by upgrading or expanding their trace metal capabilities and for new laboratories to enter these specialized and highly lucrative markets. Is your lab ready?
In this webinar we will discuss the possible impact of the CHIPS ACT in a state near you and outline the steps necessary to ready your lab to supply and support these emerging needs. 
<blockquote>
Presenter: Mark Kelinske (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Kelinske is an Applications Chemist with Agilent Technologies, specializing in advanced ICP-MS and ICP-MS/MS techniques. He received his undergraduate and graduate degrees from Texas A&amp;M University in College Station, TX. Prior to Agilent, Mark was a senior research scientist and research group manager with Southern Research Institute in Birmingham, AL, where he focused on low-level analytical chemistry, method development, and research program management.
</blockquote>
<blockquote>
Presenter: Abe Gutierrez (Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Abe is an Agilent Product Specialist with nearly 30 years’ experience with ICP-MS. Abe started as an applications chemist in the semiconductor industry and moved to Agilent/HP in 1996. Abe is a technical resource supporting the Agilent sales organization.
</blockquote>
<blockquote>
Presenter: Emmett Soffey (ICP-MS Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Emmett Soffey is an ICP-MS Product Specialist and has been with HP/Agilent for 30 years. He received his undergraduate degree from Cornell University. Prior to Agilent he worked at Brookhaven National Labs studying acid rain in the Adirondack Mountains of northern NY and then went on to work at a number of commercial analytical labs operating GC and GC/MS. Emmett has been part of the Agilent ICP-MS team since 1995. He has worked on the development of new software tools, discrete sampling devices and the GC-ICP-MS interface. In his spare time Emmett spends time hiking in the beautiful Cascade Mountains of Washington State.
</blockquote>

Agilent Technologies: Creating Helpful Incentives to Produce Semiconductors (CHIPS) Act – Is my laboratory ready to run semiconductor applications?

Creating Helpful Incentives to Produce Semiconductors (CHIPS) Act – Is my laboratory ready to run semiconductor applications?

We will discuss the possible impact of the CHIPS ACT in a state near you and outline the steps necessary to ready your lab to supply and support.

Is my laboratory ready to run semiconductor applications?

This month-long, five-parts Energy and Chemical application workshop will showcase all Agilent atomic spectroscopy techniques, including ICP-OES and ICP-MS, and MPAES.
Week 1: We will start this series with our experts discussing sample preparation and sample introduction.
Week 2: We first give an overview of all the ASTM methods our atomic spectroscopy applications support, followed by breakout sessions with our experts of each technique for more detailed discussions. Bring your questions and comments to this small group, technique specific discussions.
Week 3: We will focus on applications (besides the ASTM methods discussed last week), both common and unique. We will continue to have breakout sessions for each technique with smaller group size and more detailed discussion for these applications. We look forward to all your comments and questions.
Week 4: We will have a live demo in one of our Center of Excellence (COE) to show you the features in both software and hardware of our ICP-OES and MPAES. We will have real world samples for the analysis and showcase the exceptional results our systems can provide.
Week 5: The workshop&#39;s final week, we will continue the live demo with features in software and hardware of our ICPMS systems, both single quadrupole, and triple quadrupole. We will show the robustness of the systems for all sample types while maintaining ultralow level analyte determination. We will also highlight the ability of the triple quadrupole system to remove interference for certain difficult analytes. In these two weeks&#39; live events, we look forward to interacting with the audience to answer any questions regarding the application or our systems.
<blockquote>
Presenter: Jenny Nelson, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jenny Nelson received her Ph.D. in Analytical Chemistry from the University of Cincinnati in 2007, and her MBA from Saint Mary’s College of California in 2011. Currently, Jenny is an Application Scientist for the Life Science and Chemical Analysis team at Agilent Technologies, joining in 2012 (with a step away in 2019). Jenny is also an Adjunct Professor in the Department of Viticulture and Enology at the University of California, Davis, since 2013. Jenny has been very active with AOAC and ASTM over the past eight years, serving on expert review panels, chairing committees, and volunteering to develop new methods needed by the industry. Jenny has extensive experience in operating and method development for Inductively Coupled Plasma Mass Spectroscopy (ICP-MS), Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Microwave Plasma Atomic Emission Spectroscopy (MP-AES). Jenny has broad knowledge and experience in different speciation analysis for many sample matrices using GC-ICPMS and LC-ICPMS. As well as vast experience with sp-ICP-MS for many applications.
</blockquote>
<blockquote>
Presenter: Yan Cheung (Applications Chemist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>
<blockquote>
Presenter: Paul Krampitz (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Graduate of Bowling Green State University with a Chemistry Bachelor of Science degree. Twenty – five years of Spectroscopy experience mainly Inductively Coupled Plasma (ICP) Spectroscopy as well as ICP-MS and AAS. Experience also includes X-Ray Fluorescence (ED, WD), Laser Ablation, Inorganic Speciation and Microwave Plasma Spectroscopy. Market Segment expertise includes environmental, petrochemical, metallurgical applications.
</blockquote>
<blockquote>
Presenter: Mark Kelinske (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Kelinske is an Applications Chemist with Agilent Technologies, specializing in advanced ICP-MS and ICP-MS/MS techniques. He received his undergraduate and graduate degrees from Texas A&amp;M University in College Station, TX. Prior to Agilent, Mark was a senior research scientist and research group manager with Southern Research Institute in Birmingham, AL, where he focused on low-level analytical chemistry, method development, and research program management.
</blockquote>

Agilent Technologies: Agilent Atomic Spectroscopy in Energy and Chemicals Part 1: Sample Preparation and Sample Introduction in ICP-OES, MP-AES, and ICP-MS

Sample Preparation and Sample Introduction in ICP-OES, MP-AES, and ICP-MS

Discussing sample preparation and sample introduction.

Sample Preparation in ICP-OES, MP-AES, and ICP-MS

Agilent Technologies: Agilent Atomic Spectroscopy in Energy and Chemicals Part 2: New and Existing ASTM Methods in ICP-OES, MP-AES, and ICP-MS

New and Existing ASTM Methods in ICP-OES, MP-AES, and ICP-MS

ASTM methods our atomic spectroscopy applications support, followed by breakout sessions with our experts of each technique for more detailed discussions.

ASTM Methods in ICP-OES, MP-AES, and ICP-MS

Agilent Technologies: Agilent Atomic Spectroscopy in Energy and Chemicals Part 3: Energy and Chemical Applications in ICP-OES, MP-AES, and ICP-MS

Energy and Chemical Applications in ICP-OES, MP-AES, and ICP-MS

Breakout sessions for each technique with smaller group size and more detailed discussion for these applications.

Energy and Chemical apps in ICP-OES, MP-AES, and ICP-MS

Agilent Technologies: Agilent Atomic Spectroscopy in Energy and Chemicals Part 5: ICP-MS Software and Hardware live demo

ICP-MS Software and Hardware live demo

Live demo with features in software and hardware of our ICPMS systems, both single quadrupole, and triple quadrupole.

Agilent ICP-MS Software and Hardware live demo

Metal contents and contaminants are crucial in the production of petroleum products and petrochemicals.
Agilent ICPMS systems offer wide ranges of analytical techniques from direct injection in total metal analysis to chromatography hyphenated techniques in metal speciation. In this webinar, we will highlight the ease of organic solvent introduction in an Agilent ICPMS system, the optimization of the ICPMS system for petroleum analysis, as well as the additional metal speciation provided by the coupling of an Agilent gas chromatography system to ICPMS.
<blockquote>
Presenter: Jenny Nelson, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jenny Nelson received her Ph.D. in Analytical Chemistry from the University of Cincinnati in 2007, and her MBA from Saint Mary’s College of California in 2011. Currently, Jenny is an Application Chemist for the Life Science and Chemical Analysis team at Agilent Technologies, joining in 2012 (with a step away in 2019). Jenny is also an Adjunct Professor in the Department of Viticulture and Enology at University of California, Davis since 2013. Jenny has been very active with AOAC and ASTM over the past 8 years, serving on expert review panels, chairing committees, and volunteering to develop new methods needed by the industry.
</blockquote>
<blockquote>
Presenter: Yan Cheung (Applications Chemist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: The Analysis of Petroleum and Petroleum Products with an Agilent ICP-MS System

The Analysis of Petroleum and Petroleum Products with an Agilent ICP-MS System

The ease of organic solvent introduction in an Agilent ICPMS system, the optimization of the ICPMS system for petroleum analysis.

The Analysis of Petroleum with an Agilent ICP-MS

Organic matrices from crude oils, wear metals in transmission oil, upstream, downstream products and fuels, to cooking oils have been analyzed directly on Agilent ICP-MSs.
A little oxygen goes a long way in an argon plasma! Instead of self-aspiration, why aren’t more people using an automated approach for organic matrices, that can allow operator unattended operation of large volumes of samples in these units? Are there pitfalls to an automated approach for organics? How can they be avoided? Set up and optimization of the instrument for automated organic analyses, along with an approach for quick transition back and forth between organic and aqueous mode, will be explored.
<blockquote>
Presenter: Dr. Jonathan Talbott (Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jonathan Talbott is an ICP-MS Application Scientist with Agilent Technologies and has over 30 years of experience in atomic spectroscopy, including Atomic Absorption, Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). His primary focus the last 18 years has been with ICP-MS, in both applications and technical sales support. His areas of expertise include speciation, clinical applications and 21 CFR 11 compliance for Agilent ICP-OESs and ICP-MSs.
</blockquote>

Agilent Technologies: Automated Organic Analyses on an Agilent 7900 ICP-MS

Automated Organic Analyses on an Agilent 7900 ICP-MS

Set up and optimization of the instrument for automated organic analyses, along with an approach for quick transition between organic and aqueous.

ICPMS webinars focusing on ICP/MS - page 17