<p><strong>The biennial conference is organized by Department of Analytical Chemistry, Faculty of Science, Palacky University in cooperation with Czech Chemical Society and Czech Society for Mass Spectrometry. It is organized as a meeting of the scientists from the universities, academic institutes and experts from the routine analytical laboratories.</strong></p><p>The scientific programme of the conference highlights the <strong>latest advances</strong> in analytical chemistry, chromatography, mass spectrometry, metabolomics, microextraction, multidimensional separations, and data-driven analytical workflows. Participants can look forward to plenary lectures from internationally recognized experts, <strong>specialized sessions covering LC-MS, GC×GC, SFC-MS, MALDI-MS</strong>, <strong>capillary electrophoresis, and multiomics,</strong> as well as poster sessions, vendor presentations, and networking events connecting academic researchers with industry professionals.</p><h3><strong>Registration</strong></h3><blockquote><p class="cke-user_style-important"><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://www.upol.cz/chiranal/registration/"><strong>Register for the conference HERE</strong></a></p><ul><li><strong>Conference Fees:</strong> 6.000,- CZK / 250 EUR &nbsp;without VAT</li><li><strong>Deadline for registration is May 31st, 2026.</strong></li></ul></blockquote><h3><strong>Programme</strong></h3><h4><strong>Monday 15th June 2026, Fort Science</strong></h4><h5><strong>14:00 - 17:30 Registration, individual arrival of participants and accommodation</strong></h5><h5><strong>16:00 - 16:15 Opening of the conference, presentation of official representatives of the conference partners</strong></h5><ul><li>Foreword: Petr Bednář</li></ul><h5><strong>16:15 - 17:15 Plenary Lecture: Metabolomics and Lipidomics in Biomedical Research</strong></h5><ul><li>Michael Laemmerhofer</li></ul><h5><strong>17:30 - ??? Welcome party + banquet</strong></h5><h4><strong>Tuesday 16th June 2026</strong></h4><h5><strong>8:30 – 9:00 Breakfast (Faculty of Science, foyer, 2nd floor), installation of posters (Faculty of Science, seminary rooms, 2nd floor)</strong></h5><h5><strong>9:00 – 9:30 Breaking boundaries in natural product analysis with SFC-MS</strong></h5><ul><li>Lucie Nováková</li></ul><h5><strong>9:30 – 10:00 Data science-assisted method development for on-line supercritical fluid extraction – chromatography</strong></h5><ul><li>Kevin Schug</li></ul><h5><strong>10:00 – 10:20 Predicting Chromatographic Retention Times: Descriptor Choice, Feature Selection, and QSAR Interpretation</strong></h5><ul><li>Roman Szucs</li></ul><h5><strong>10:20 – 10:40 Development of Novel Calibration Methods and Their Application to the Chromatographic Determination of Bisphenols</strong></h5><ul><li>Paweł Świt</li></ul><h5><strong>10:40 – 11:00 Applications of online SFE – SFC: A Powerful Tool for Small Molecule Extraction and Analysis</strong></h5><ul><li>Kevin Schug (Shimadzu)</li></ul><h5><strong>11:00 - 11:30 </strong>Coffee break</h5><h5><strong>11:30 - 12:00 Enantioselective Ion Pairing Systems, my 50 years of Contribution</strong></h5><ul><li>Wolfgang Lindner&nbsp;</li></ul><h5><strong>12:00 - 12:30 The future of multimodal chiral stationary phases</strong></h5><ul><li>Michal Kohout</li></ul><h5><strong>12:30 - 12:50 Analytical Challenges in the Development of Voclosporin HPLC methods : Application of High Temperature Liquid Chromatography in pharmaceutical analysis</strong></h5><ul><li>Pavel Blatný (TAPI Czech Industries s.r.o.)&nbsp;</li></ul><h5><strong>13:10 - 13:30 Next-Gen Zwitterionic HILIC: Particle Morphology Matters</strong></h5><ul><li>Petra Lewits (Merck)</li></ul><h5><strong>13:30 - 15:00 </strong>Lunch</h5><h5><strong>15:00 - 16:30 Poster session I (even poster numbers) and coffee break (Faculty of Science, foyer, seminary rooms, 2nd floor)</strong></h5><h5><strong>16:30 - 17:00 Quantification of polyethylene in compostable plastic formulations by analytical pyrolysis-based methods with split modulation</strong></h5><ul><li>Marco Mattonai</li></ul><h5><strong>17:00 - 17:30 Untargeted Analysis of a Late Classic Period Maya Femur by Comprehensive Two-Dimensional Gas Chromatography (GCxGC)</strong></h5><ul><li>Petr Vozka</li></ul><h5><strong>17:30 - 17:50 Theoretical Decomposition and Practical Mitigation of Matrix Effects in Quantitative LC–MS Calibration</strong></h5><ul><li>Ivan Petřík&nbsp;</li></ul><h5><strong>17:50 - 18:10 Feed Injection-Enabled 2D-LC/MS for Enhanced Analyses of Lipophilic Drug Formulations</strong></h5><ul><li>Daniel Foshag (Agilent Technologies)</li></ul><h5><strong>18:10 - 18:30 Modern approach for analytical and preparative liquid chromatography by ECOM manufacturer</strong></h5><ul><li>Ondřej Kuchler (ECOM)&nbsp;</li></ul><h5><strong>18:30 - 19:30 </strong>Dinner (university cafeteria)<br>&nbsp;</h5><h4><strong>Wednesday 17th June 2026</strong></h4><h5><strong>8:30 – 9:00 Breakfast (Faculty of Science, foyer, 2nd floor), installation of posters (Faculty of Science, seminary rooms, 2nd floor)</strong></h5><h5><strong>9:00 – 9:30 The Role of Analytical Chemistry in Solving Contemporary Challenges in Biomethane Plants</strong></h5><ul><li>Justyna Płotka-Wasylka</li></ul><h5><strong>9:30 – 10:00 Centrifugation-assisted micro-extraction using functionalized glass beads for rapid HPLC analysis</strong></h5><ul><li>&nbsp;František Švec</li></ul><h5><strong>10:00 – 10:20 A Simple Microextraction Technique: PT-µSPE</strong></h5><ul><li>Massoud Kaykhaii</li></ul><h5><strong>10:20 – 10:40 LC-MS/MS Salicylate Profiling in Arabidopsis Thaliana Plants under Infection with Pathogens of Different Lifestyles</strong></h5><ul><li>Jitka Široká</li></ul><h5><strong>10:40 – 11:00 Chromline: Performance &amp; Innovation</strong></h5><ul><li>Štěpán Dostál (Chromservis)</li></ul><h5><strong>11:00 - 11:30 </strong>Coffee break</h5><h5><strong>11:30 - 12:00 Rational approaches to MALDI-MS matrix design</strong></h5><ul><li>Hans-Dieter Junker</li></ul><h5><strong>12:00 - 12:30 Multiomics in Laboratory Medicine</strong></h5><ul><li>David Friedecký</li></ul><h5><strong>12:30 - 12:50 Back to the Old Masters of Lacquerware: Classification of Asian Lacquers Using Atmospheric Solids Analysis Probe High-Resolution Tandem Mass Spectrometry</strong></h5><ul><li>Vojtěch Zemek</li></ul><h5><strong>12:50 - 13:10 Using Charge Detection Mass Spectrometry with an Electrostatic Linear Ion Trap for the Analysis of Viral Vectors and Large Protein Complexes</strong></h5><ul><li>Alex Muck (Waters)</li></ul><h5><strong>13:10 - 13:30 Pioneering 4D Multiomics and Functional Proteomics/Matbolomics 2.0</strong></h5><ul><li>Daniel Vláčil (Bruker)</li></ul><h5><strong>13:30 - 15:00 </strong>Lunch</h5><h5><strong>15:00 - 18:00 Social/sport event</strong></h5><h5><strong>19:00 - ???&nbsp;Social dinner (Faculty of Science, foyer, 6th floor)</strong></h5><h4><strong>Thursday 18th June 2026</strong></h4><h5><strong>8:30 – 9:00 Breakfast (Faculty of Science, foyer, 2nd floor), installation of posters (Faculty of Science, seminary rooms, 2nd floor)</strong></h5><h5><strong>9:00 – 9:30 Capillary Electrophoresis - Mass Spectrometry for the characterization of proteoforms on the intact level</strong></h5><ul><li>Christian Neusüß</li></ul><h5><strong>9:30 – 10:00 Investigation of acid-base and electromigration properties of biopeptides by capillary electrophoresis</strong></h5><ul><li>Václav Kašička</li></ul><h5><strong>10:00 – 10:20 FromTissue to Single Cells: Targeted Hormonomics in Root Protoplasts</strong></h5><ul><li>Ondřej Novák</li></ul><h5><strong>10:20 – 10:40 Three-level Microfluidic Architecture as a Framework for Modular Analytical Instrumentation</strong></h5><ul><li>Kateryna Trach</li></ul><h5><strong>10:40 – 11:00&nbsp;Optimizing Gradient Conditions in Comprehensive 2D Liquid Chromatography: A Comparison of Chromatographic Response Functions</strong></h5><ul><li>Petr Česla</li></ul><h5><strong>11:00 - 11:30 </strong>Coffee break</h5><h5><strong>11:30 - 12:00 Open-source capillary electrophoresis - democratizing separation science: Design principles and practical implementations from our laboratory</strong></h5><ul><li>Petr Kubáň</li></ul><h5><strong>12:00 - 12:30 Analysis of biomedical, environmental and pharmaceutical samples by microchip electrophoresis</strong></h5><ul><li>Marián Masár</li></ul><h5><strong>12:30 - 13:00 UV-LED coupling for high-sensitivity glycan analysis in commercial capillary electrophoresis system</strong></h5><ul><li>Jana Lavická</li></ul><h5><strong>13:30 - 14:00 Closing of the conference and farewell drink (Faculty of Science, foyer, 2nd floor)</strong></h5><h5><strong>14: 00 - 15:00 &nbsp;&nbsp;&nbsp; </strong>Lunch</h5><h3><strong>Sponsors &amp; Partners</strong></h3><h5><strong>Organizers</strong></h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/341"><strong>Department of Analytical chemistry, Faculty of Science, Palacky University</strong></a></li><li>Faculty of Science, Palacky University</li></ul><h5><strong>Co-organizers</strong></h5><ul><li>ARTECA</li><li>Fort Science</li><li>SMALT</li><li>OSCHE ČSCH</li><li>Czech Chemical Society (ČSCH)</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.cz/companies/21"><strong>Czech Society for Mass Spectrometry (CSMS)&nbsp;</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/1"><strong>LabRulez</strong></a></li></ul><h5><strong>Sponsors</strong></h5><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.cz/companies/37"><strong>Altium International s.r.o. (HPST)</strong></a></li><li>Alven Laboratories</li><li>AMEDIS</li><li>Bruker</li><li>GALOCHROM</li><li>Chromservis</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.cz/companies/176"><strong>Metrohm Česká republika</strong></a></li><li>Merck</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/168"><strong>ECOM</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/51"><strong>Phenomenex</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.cz/companies/42"><strong>Pragolab</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.cz/companies/43"><strong>Shimadzu Handels GmbH</strong></a></li><li>TAPI</li><li>Teva</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.cz/companies/50"><strong>Waters Gesellschaft m.b.H.</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/59"><strong>Watrex</strong></a></li></ul>

Advances in Chromatography and Electrophoresis & Chiranal 2026 - Programme

<h3><strong>Introduction</strong></h3><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_From_Raw_Signals_to_Reliable_Results_Post_Acquisition_Data_Workflows_in_ICP_Analysis_f7248bb920.jpg" alt="Thermo Fisher Scientific: From Raw Signals to Reliable Results: Post-Acquisition Data Workflows in ICP Analysis" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_From_Raw_Signals_to_Reliable_Results_Post_Acquisition_Data_Workflows_in_ICP_Analysis_f7248bb920.jpg 245w," sizes="100vw" width="1024" height="512"></p><p>Modern elemental analysis techniques such as ICP-OES and ICP-MS are capable of generating large volumes of highly sensitive, multi-dimensional data in a single analytical run. These technologies are widely used across environmental, pharmaceutical, food, and materials science applications due to their precision and low detection limits. However, while significant emphasis is often placed on method development, instrument optimisation, and sample preparation, the true scientific value of any analysis is ultimately determined during the post-acquisition phase. It is here that raw instrumental signals are processed, interrogated, and validated before being translated into meaningful and defensible results. Whether you are working with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?category=227&amp;instrumentationItems=84&amp;manufacturerItems=3&amp;search=iCAP+PRO"><strong>iCAP PRO ICP-OES</strong></a>, the&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?category=232&amp;manufacturerItems=3&amp;search=iCAP+MX"><strong>iCAP MX ICP-MS</strong></a>, the iCAP 7000 OES, or Qnova ICP-MS systems, the interface and workflow logic remain familiar.</p><h3><strong>Method</strong></h3><p>Following data acquisition, analysts must first navigate and organise <strong>complex datasets</strong> efficiently. Large analytical sequences may contain hundreds of samples, each with multiple analytes, replicates, and quality control elements. Tools such as column sorting and filtering are therefore essential for structured data interrogation. Sorting concentration values, for example, allows rapid identification of extreme values or potential outliers, while filtering by sample type, QC category, or analyte enables targeted investigation of specific data subsets. These tools support not only workflow efficiency but also statistical awareness, helping analysts detect trends, inconsistencies, or anomalies that may otherwise go unnoticed. In parallel, maintaining a complete <strong>LabBook</strong> history ensures that all changes to methods, calibration parameters, and analytical settings are recorded. This level of traceability is essential for regulatory compliance, particularly in environments operating under ISO standards or Good Laboratory Practice, and it ensures that results can be reproduced and audited with confidence.</p><p>A fundamental aspect of post-acquisition processing is the <strong>application and evaluation of correction models</strong>. ICP-based techniques are inherently susceptible to a range of <strong>interferences</strong>, including <strong>background signals, spectral overlaps, and matrix-induced signal suppression or enhancement</strong>. Blank subtraction is typically the first correction applied, removing contributions from reagents, solvents, and instrument background. By comparing results with and without blank correction, analysts can assess the significance of background contributions, particularly at low concentration levels. In ICP-OES, Inter-element correction (IEC) addresses spectral interferences by mathematically compensating for overlapping emission lines, which is especially important in complex matrices containing multiple elements.&nbsp;For ICP-MS, correction equations can be similarly implemented to correct for the presence of an isobaric interferences of mass signals.</p><p><strong>Internal standard (IS) correction</strong> is another critical component, used to normalise signal fluctuations caused by instrument drift, variations in sample introduction, or matrix effects. Reviewing data with these corrections toggled on and off provides valuable diagnostic insight, allowing analysts to determine whether corrections are appropriate and whether the underlying method is robust.</p><p>While processed concentration data is the primary output of most analyses, deeper insight can be gained by examining the <strong>underlying signal intensities</strong>. Replicate measurements, for instance, provide a direct assessment of analytical precision. Consistent replicate signals indicate stable measurement conditions, whereas significant variation may suggest issues such as sample heterogeneity, nebuliser instability, or matrix interference. Similarly, blank intensities can reveal contamination or insufficient rinsing between samples, often serving as an early indicator of systematic error. In ICP-OES, spectral <strong>sub-array views</strong> allow analysts to visualise the emission profile around a selected wavelength, enabling verification of peak shape, background correction points, and potential spectral overlaps. In <strong>ICP-MS</strong>, attention must be given to <strong>detector behaviour</strong>, particularly when signals transition between pulse and analog modes at higher concentrations. Such transitions can introduce non-linearity into calibration curves, sometimes necessitating cross-calibration to maintain quantitative accuracy.</p><p><strong>Calibration </strong>is central to transforming raw signal intensity into quantitative concentration data, and its evaluation is one of the most critical steps in the workflow. Several performance indicators are used to <strong>assess calibration quality</strong>. The <strong>coefficient of determination</strong> (<strong>R²</strong>) provides a measure of how well the calibration model fits the data, though a high R² alone does not guarantee accuracy. Bias offers insight into systematic deviations between expected and measured values, highlighting potential issues with standards or instrument response. <strong>Detection limits</strong>, including the <strong>limit of detection </strong>(<strong>LOD</strong>) and<strong> instrument detection limit</strong> (<strong>IDL</strong>), define the sensitivity of the method, while <strong>background equivalent concentration</strong> (<strong>BEC</strong>) reflects the contribution of background signal to the overall measurement. A comprehensive calibration assessment requires consideration of all these parameters together, rather than reliance on a single metric. In addition, quality control samples—such as <strong>calibration check standards </strong>(<strong>CCVs</strong>),<strong> certified reference materials</strong> (<strong>CRMs</strong>), and <strong>matrix spikes</strong>—are used to verify accuracy and method performance. Automated flagging of QC results that fall outside predefined acceptance criteria provides an efficient means of identifying non-compliant data and supports rapid decision-making.</p><p>Equally important is the <strong>evaluation of instrument performance</strong> through diagnostic readbacks recorded during the analysis. These parameters provide insight into the physical and operational state of the instrument at the time of measurement. For<strong> ICP-MS</strong>, key readbacks include <strong>nebuliser gas pressure, vacuum levels, and interface conditions</strong>. Changes in these parameters can indicate issues such as partial blockages, salt deposition, or vacuum degradation. <strong>Similarly, plasma-related parameters and gas flow stability</strong> are critical indicators in <strong>both ICP-OES and ICP-MS systems</strong>. By correlating readback trends with analytical results, analysts can identify the root causes of anomalies, distinguish between instrument-related and sample-related issues, and take corrective action where necessary. This diagnostic capability is particularly valuable when troubleshooting unexpected results or when sharing data with technical support teams for further investigation.</p><p>Once the data has been thoroughly reviewed and validated, the <strong>final step is to export and communicate the results </strong>in a clear and usable format. Structured reporting tools enable the generation of comprehensive summaries that include concentration data, calibration details, quality control results, and any associated flags or annotations. These reports are essential for documentation, regulatory submissions, and communication with stakeholders. For greater flexibility, exporting data in CSV format allows integration with external tools such as spreadsheet software, statistical analysis platforms, or laboratory information management systems (LIMS). This interoperability facilitates advanced data analysis, long-term data storage, and seamless integration into broader laboratory workflows.</p><h3><strong>Conclusion</strong></h3><p>In conclusion, post-acquisition data processing is not merely a procedural step but a critical component of the analytical workflow that determines the reliability and scientific validity of results. Through careful organisation of data, rigorous application of correction models, detailed evaluation of calibration performance, and continuous monitoring of instrument diagnostics, analysts can ensure that their results are both accurate and defensible. As analytical technologies continue to evolve and datasets become increasingly complex, the importance of robust and systematic data evaluation will only grow. Mastery of these workflows transforms raw instrumental signals into high-quality scientific information, underpinning confident decision-making across a wide range of applications.</p><h3><strong>Acknowledgement</strong></h3><p>I would like to thank&nbsp;<strong>Matthew Gregory&nbsp;</strong>Field Applications Scientist, North EMEA, Trace Elemental Analysis and&nbsp;<strong>David Fishwick&nbsp;</strong>Field Applications Scientist, North EMEA, Trace Elemental Analysis for the support on this blog and the webinars.</p><p>Sign up for our webinars live and on demand.</p><p><strong>English</strong></p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5795"><strong>Lunch and Learn Tips and Tricks Series: Qtegra Part 1</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5976"><strong>Lunch and Learn Tips and Tricks Series: Qtegra Part 2</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5977"><strong>Lunch and Learn Tips and Tricks Series: Trace Elemental Analysis (ICP-OES &amp; ICP-MS)</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5978"><strong>Trace Elemental Analysis: Ask the Expert</strong></a></li></ul><p><strong>Deutsch</strong></p><ul><li><strong>19. März 2026</strong><br><a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179134/393E071E3B501943730958BA6203F477">Interne Standards in der ICP-OES: Ein Praxisguide für zuverlässige Qualitätssicherung im Labor</a></li><li><strong>18. Juni 2026</strong><br><a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179292/AE4C576B6A54D1AC182F7F77573D380F">Fehler reduzieren, Durchsatz steigern: Autoverdünnung mit PrepFast am ICP-MS</a></li><li><strong>17. September 2026</strong><br><a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179423/B5019C560431BADCA2A76E54E4EFE56F">ICP-OES smarter nutzen: Probendurchsatz erhöhen, Ressourcen sparen</a></li><li><strong>17. Dezember 2026</strong><br><a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179530/94EEDD1F56138F5EEE2AF24E29E6C12A">Qtegra ISDS Software Unlocked – Live im Expertengespräch</a></li></ul><blockquote><p><strong>Visit us on&nbsp;</strong><a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/"><strong><u>LinkedIn:</u></strong></a><strong>&nbsp;</strong>#AnalyticalChemistry #ICPMS #ICPOES #DataAnalysis</p></blockquote>

From Raw Signals to Reliable Results: Post-Acquisition Data Workflows in ICP Analysis

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 18th May 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> libraries.</p></blockquote><p>This week we bring you brochure by<strong> MILESTONE </strong>and<strong> </strong>application notes by<strong> Shimadzu </strong>and <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. MILESTONE: </strong><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?search=ETHOS+LEAN+"><strong>ETHOS™ LEAN</strong></a><strong> Compact Microwave Labstation</strong></h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Brochure_ETHOS_LEAN_1_c80f4403a4.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Sample preparation is the foundation of many analytical workflows, and often the most critical step. In elemental analysis, proper digestion ensures accurate and reproducible results with AAS, ICP, and ICP-MS by enabling complete recovery of target elements, minimizing interferences, and reducing blanks. With over 35 years of innovation and more than 30,000 microwave systems installed worldwide, Milestone is a global leader in microwave sample preparation. The ETHOS LEAN, now in its 2nd series, represents this expertise: a compact, affordable labstation delivering full digestion capabilities without compromise. Beyond digestion, ETHOS LEAN supports solvent extraction for chromatography, solvent-free extraction of natural products, and even microwave synthesis workflows, offering unmatched versatility in its class. Selecting the right system is more than a purchase decision: it’s choosing a partner. With Milestone, you gain not only proven technology but also the knowledge and support to ensure long-term success.</p><h4><strong>BUILT FOR MORE THAN DIGESTION</strong></h4><p><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?search=ETHOS+LEAN+"><strong>ETHOS LEAN</strong></a> goes beyond digestion. As a compact Microwave Labstation, it supports a suite of accessories that expand its capabilities into multiple workflows. Microwave technology provides a faster, cleaner, and more efficient alternative to conventional sample preparation techniques, reducing processing time, simplifying operations, and minimizing reagent consumption.&nbsp;</p><h5><strong>Solvent extraction</strong></h5><p>Closed-vessel microwave technology streamlines extraction for chromatographic analysis, dramatically reducing solvent use and cutting analysis times. Ideal for organic pollutant extraction from environmental samples or fat determination in food and feed.</p><h5><strong>Solvent-free extraction</strong></h5><p>Patented Milestone technology enables fast and efficient essential oil extraction in just minutes, preserving aroma and natural composition while minimizing degradation. Selective heating promotes a quicker, more efficient release from plant cells.</p><h5><strong>Microwave synthesis</strong></h5><p>Microwave synthesis is a safer and faster alternative to heating mantles or complex reactors, enabling rapid optimization of conditions. Its speed supports research projects and allows practical teaching sessions within standard class times.</p><h5><strong>High-temperature processes</strong></h5><p>With the ultraFAST accessory, ETHOS LEAN reaches 1200 °C in just minutes, transforming into a microwave furnace for demanding high-temperature applications such as inorganic synthesis, fusion, or fire assay.</p><h3><strong>2. Shimadzu: Discriminating between Microsamples of Similar Resins with a Combination of FTIR and Thermal Analysis Instruments</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01114_en_a9291de45e.pdf"><strong>Full PDF for download</strong></a></li></ul><h4><strong>User Benefits</strong></h4><ul><li>Using the ATR method with FTIR spectroscopy enables simple and rapid qualitative analysis of polymers.</li><li>DSC analysis may be able to reveal differences in polymer thermal histories that cannot be confirmed by FTIR alone.</li><li>TG-DTA can be used to confirm the content level of inorganic additives in polymers</li></ul><p>A wide range of polymer resins is used in modern society for diverse applications, resulting in increasing demand for qualitative analysis of resin microsamples, such as identifying resin contaminants in products or qualitatively evaluating microplastics for environmental impact assessments. FTIR spectrophotometers are commonly used for qualitative analysis of polymers. In particular, the ATR (attenuated total reflectance) method is widely used because measurements can be performed simply and quickly by clamping a sample against a prism to ensure close contact.&nbsp;</p><p>While the ATR method makes it relatively easy to discriminate between different types of polymers, clear differences may not appear when analyzing similar polymers—for example, when there are only slight differences in the type or content of additives or the thermal histories during manufacturing. In such cases, differences may be confirmed by using thermal analysis instruments, such as a DSC or TG-DTA system.&nbsp;</p><p>This article describes an example in which three instruments— an <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=IRSpirit-TX"><strong>IRSpirit-TX</strong></a> FTIR spectrophotometer, a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=DSC-60+Plus"><strong>DSC-60 Plus</strong></a> differential scanning calorimeter, and a DTG-60 simultaneous DTA-TG unit (Fig. 1)—were used to confirm differences among six microsamples of polypropylene (PP) resin.</p><h4><strong>Conclusion</strong></h4><p>Details of the six types of PP resin identified from the above measurement results are shown in Table 4. The results indicate that by using an FTIR spectrophotometer in combination with thermal analysis equipment, such as DSC and TG-DTA systems, it is possible to distinguish between minute amounts of the same type of resin with various different properties.</p><h3><strong>3. Thermo Fisher Scientific: XPS depth profiling of advanced solar cells with femtosecond laser ablation</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/xps_depth_profiling_advanced_solar_cells_appnote_7bda4471a5.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Perovskites are an emerging class of materials in the solar cell industry, exhibiting a number of promising properties, such as improved efficiency and weight, compared to traditional silicon-based devices. X-ray photoelectron spectroscopy (XPS) is an established tool in solar cell research due to its ability to provide extremely surface-sensitive information about elemental composition along with chemical and electronic states.¹ XPS is ultimately a surface analysis technique, however, and in order to assess the full composition of complex, multi-layered structures such as solar cells, a technique known as depth profiling is necessary, which performs multiple rounds of successive material removal and analysis.&nbsp;</p><p>This application note explores a recent study by Chandler et al. that focuses on solar cells designed for aerospace applications,² where accurate determination of the “true” starting composition of the stacks is essential for tests that simulate space conditions, such as radiation exposure. Without a reliable baseline, it becomes impossible to distinguish between changes induced by the experimental conditions and artifacts introduced during analysis. Conventional ion beam sputtering methods used for depth profiling are known to distort chemical information for perovskites; femtosecond laser ablation (fs-LA) is presented as a novel, alternative method that helps to preserve vital chemical information.</p><h4><strong>Experimental</strong></h4><p>A halide-perovskite-based solar cell was fabricated on an ITO/SnO₂ substrate using a spin coating method; the structure of the layers is shown in Figure 1.</p><p>Analysis was performed with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2206"><strong>Thermo Scientific™ Hypulse™ Surface Analysis System</strong></a>, which is equipped with both traditional ion-beam sputtering and femtosecond-laser ablation capabilities. XPS data was collected in SnapShot acquisition mode using an X-ray spot size of 30-200 µm, depending on the method of depth profiling.&nbsp;</p><p>A MAGCIS ion gun was employed for the sputter depth profiles, generating either a 500 eV monatomic Ar⁺ beam or 8 keV Ar₁₅₀⁺ clusters. The fs-LA depth profiles were generated using a 1,030 nm wavelength laser operating at a 160 fs pulse length. The pulse energy was increased from 42 µJ to 167 µJ when transitioning from the perovskite layer into the substrate structure. A flood gun was employed for charge neutralization during profiling.</p><h4><strong>Summary&nbsp;</strong></h4><p>This study confirms the challenges associated with traditional ion sputtering (both monatomic and cluster) for the depth profiling of perovskite-based solar cells. These methods cause preferential sputtering, particularly of lighter elements like carbon, nitrogen, and iodine, which distorts elemental ratios in the profiles and results in artificial signals, such as the formation of metallic lead (Pb⁰). Depth profiling with femtosecond laser ablation represents a novel and robust alternative that preserves the original chemical composition and oxidation states throughout the perovskite layer. By avoiding preferential removal effects, accurate compositional information is maintained during the profile, and erroneous peak signals associated with chemical reduction are eliminated. These factors are vital in establishing a chemically undisturbed baseline before performing tests that simulate environmental effects on the solar cells.&nbsp;</p><p>With fs-LA depth profiling, any induced changes can be confidently delineated from analytical artifacts, and researchers can better understand and mitigate environmental effects on solar-cell performance, eventually leading to improved solar technologies for aerospace applications.</p>

News from LabRulezICPMS Library - Week 21, 2026

Article

Events

Application

Academy

Video

The Department of Analytical Chemistry guarantees study programs for Bc., Mgr. and Ph.D.. It has state-of-the-art instruments for tailor-made analyzes. Thanks to GMP certification, we specialize in cooperation with entities from the pharmaceutical industry.

Department of Analytical Chemistry

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Mettler-Toledo

Anton Paar

Agilent Technologies

Unchained Labs

AZoM

Milestone

SelectScience

Wiley

<p><strong>This free online event is for chemists and engineers interested in learning new methods to design, monitor, and control flow processes. Each presenter will share presentations demonstrating the use of spectroscopy to track reaction performance in real-time for process and product optimization.</strong></p><p><strong>Program:</strong></p><ul><li>Novel developments in continuous flow reactor technologies</li><li>Advantages over batch processes</li><li>PAT for rapid analysis, optimization, and scale-up</li></ul><blockquote><h5><strong>Presenters</strong></h5><p><strong>Continuous Hydrogenation: Catalyst Screening to Continuous Processing using PAT and Data Rich Experimentation</strong></p><ul><li>Darren Whitaker, Associate Director - Takeda</li></ul><p><strong>Mechanochemistry: Chemical Synthesis without Bulk Reaction Solvent</strong></p><ul><li>Duncan L. Browne, Associate Professor in Organic Synthesis and Drug Discovery - University College London</li></ul><p><strong>Data-Rich Experimentations as Enabling Tool to Accelerate Small Molecule Process Development</strong></p><ul><li>Dr. Peter Sagmeister, Postdoctoral Associate - Massachusetts Institute of Technology</li></ul><p><strong>Approaching Acid Catalysis with Solid Acid in a Packed Bed Reactor</strong></p><ul><li>Zheng Zhao, Principal Chemical Engineer - Pfizer</li></ul></blockquote>

Mettler Toledo: Continuous Flow Process Optimization and Control

Continuous Flow Process Optimization and Control 

Novel developments in continuous flow reactor technologies, Advantages over batch processes and PAT for rapid analysis, optimization, and scale-up.

<header><h4><strong>Discover the Most Important Techniques for the Thermal Characterization of Food Products</strong></h4></header><main><div><div><h5><strong>Program</strong></h5><ul><li>Regulatory food standards and guidelines</li><li>Thermal analysis techniques (DSC, TOA, TGA, TMA, DMA, and DP)</li><li>Food applications</li><li>Techniques and field of application</li><li>Interactive Q&amp;A session</li></ul></div></div><div><div><div><p>Food plays a vital role beyond simply providing essential nutrients and nourishment—it is a pathway to good health. This evolving perspective has opened up new frontiers in food science, food technology, and the analytical testing of food products and ingredients.</p><p>Join our upcoming webinar to discover how thermal analysis techniques can be applied to investigate the properties of various food products and packaging throughout processing, storage, and quality control. We will showcase applications relevant to multiple segments of the food industry.</p><p><strong>Secure you spot now and don’t miss the opportunity to ask our experts your questions!</strong></p><h4><strong>Food: A Highly Regulated Industry</strong></h4><p>Food products have a direct impact on public health. As a result, international and national regulations mandate specific testing methods to ensure these sensitive products meet strict quality and safety standards. Thermal analysis is one such essential technique, playing a crucial role in characterizing a wide range of foods and packaging materials across various segments of the industry.</p><h4><strong>Important Thermal Analysis Techniques for the Food Industry</strong></h4><ul><li><strong>DSC:</strong> Important for determining melting behavior, used also for the heat of fusion, purity, polymorphism, glass transition, and oxidation stability.</li><li><strong>TGA:</strong> Mainly used to study evaporation, desorption &amp; vaporization behavior, thermal stability, kinetics of decomposition, and composition analysis.</li><li><strong>TOA: </strong>In this technique, visual observation is used to investigate melting behavior and polymorphism.</li><li><strong>TMA:</strong> Typically used to study expansion and shrinkage behavior of packaging films, as well as glass transition.</li><li><strong>DMA: </strong>This is the most sensitive method used for investigating glass transition.</li></ul><h4><strong>Typical Applications</strong></h4><p>Common applications include protein denaturization of dry milk powder (DSC), moisture content in edible oils (TGA), and the softening/melting of multilayer packaging film (TMA). However, the potential uses of thermal analysis techniques in the food industry are diverse and extensive!&nbsp;</p></div><div><div data-advanced-option="false" data-has-preview-image="false" data-video-id="" data-component-id="2110920040"><div style="max-width:1px;width:100%;" id="mediaContainerWrapper_2110920040"><div style="height:1px;width:1px;" data-external-url="" id="mediaContainer_2110920040" data-advanced-option="false" data-width="1" data-height="1" data-video-id="">&nbsp;</div></div></div></div></div></div></main><div><div><div data-advanced-option="false" data-has-preview-image="false" data-video-id="" data-component-id="2110920040"><blockquote><div><strong>Presenter: </strong>Dr. Teresa Dennenwaldt</div><p>Dr. Teresa Dennenwaldt obtained her PhD in chemistry in 2013 and completed a postdoc at the Ecole Polytechnique Fédérale de Lausanne, Switzerland in the field of electron microscopy and spectroscopy. In 2018, she joined METTLER TOLEDO as an application specialist for Thermal Analysis. In her current position, she expertly uses, teaches, and supports DSC, TGA, TMA, and DMA instruments at the METTLER TOLEDO head office in Switzerland.</p></blockquote></div></div></div>

Mettler Toledo: Thermal Analysis in the Food Industry

Thermal Analysis in the Food Industry

Join this webinar to learn key thermal analysis techniques for food products and packaging, regulatory requirements, and real-world food industry applications.

<h4><strong>Food Safety Webinar Series: When Food Meets the Lab</strong></h4><p><strong>Food testing in the region still revolves around “legacy” contaminants that decide release, rejection, and recall discussions - veterinary drug residues, pesticide residues and fumigants, and toxic elements including species-sensitive forms, in different food matrices. This 3-part series is built for audiences where regulatory expectations reference Codex-based frameworks, country-specific legislative guidelines, and import/export-market requirements that influence testing scope, reporting limits, and confirmation criteria. Each webinar focuses on the analytical factors that drive outcomes: matrix effects and co-extractives, trace-level quantitation, transition/ion-ratio checks, interference control, and reportable result logic.</strong></p><p>Keynote expert speakers will set the regulatory context, give a glimpse of the current trends, and future implications. Agilent workflow segments map these needs to sample preparation nuances, LC-MS/MS for multi-class residues, GC-MS/MS and headspace GC for residue/fumigant markers, and ICP-MS plus LC-ICP-MS for heavy metals and speciation, including QC structures and data review patterns used in high-throughput labs, to name a few.</p><h5><strong>Webinar Series Details</strong></h5><ul><li>Register once to attend the complete 3-part series</li><li>Submit your questions beforehand</li><li>Access recorded sessions anytime within one year</li><li>Certificate of attendance will be provided to all attendees</li></ul><h4><strong>Part 3: Heavy Metals &amp; Speciation Edition</strong></h4><p>Toxic element testing continues to be a core requirement due to national contaminant limits and trade-facing specifications for Pb, Cd, Hg, As and related elements. This webinar separates total-element panels from speciation cases where chemical form affects interpretation, particularly arsenic species in rice/cereal products and marine foods. The session covers digestion strategy, contamination control, reagent blank behavior, and trace-level drivers of data quality: polyatomic/isobaric interference removal, drift control, internal standards, calibration verification, and batch acceptance logic. Speciation discussion includes species-preserving extraction, chromatographic separation choices, prevention of species interconversion, and interpretation of species profiles under matrix load.</p><blockquote><p><strong>Presenter: </strong>Dr. Usharani Dandamudi (Senior Principal Scientist, FS &amp; AQCL, CSIR-Central Food Technological Research Institute (CFTRI), India)</p><p><strong>Presenter: </strong>Dr. Vinay Jain (Application Engineer, Agilent Technologies, India)</p></blockquote>

Agilent Technologies: Food Safety Webinar Series: When Food Meets the Lab

Heavy Metals & Speciation Edition

Heavy metals and speciation webinar: ICP-MS and LC-ICP-MS workflows for Pb, Cd, Hg, arsenic species and trace-level food testing.

<p><strong>Particulates remain one of the most common and costly challenges in pharmaceutical manufacturing. Identifying the root cause of these particulates is essential to de-risk clinical development and ensure product quality. This challenge is particularly significant for advanced therapeutics such as viral vectors and cell therapies, where limited batch sizes make traditional particulate analysis difficult, as these methods often require large sample volumes.</strong></p><p>Join Philipp Beck, Ph.D., from Ascend Advanced Therapies as he discusses stability study strategies and compares modern particulate analysis technologies. The webinar will also highlight the advantages of Backgrounded Membrane Imaging and explain why Waters Aura is a must-have platform for formulation development.</p><blockquote><p><strong>Speaker:</strong> Philipp Beck, PhD (Manager Formulation Development, Ascend Advance Therapies)</p><p><strong>Speaker</strong>: Paul Dyer, PhD (Principal Market Application Specialist (Aura), Waters Corporation</p></blockquote>

Wiley: Particulates in your ATMP – Now What?! Methods & Strategies to rescue timelines and improve formulations

Particulates in your ATMP – Now What?! Methods & Strategies to rescue timelines and improve formulations

Learn how to analyze and control particulates in ATMPs using advanced methods like membrane imaging to improve product quality and accelerate development.

Particulates in ATMPs Methods to Improve Formulations

<h4><strong>Food &amp; Feed Sample Preparation Webinar Series</strong></h4><p><strong>Ensuring food and feed quality requires reliable determination of both contaminants and nutrients, yet sample preparation remains one of the most challenging and time-consuming steps in the analytical workflow. This webinar series introduces modern approaches to digestion and extraction that improve data quality, reduce reprocessing, and increase laboratory productivity. Through four dedicated events, covering heavy metals, organic contaminants, macro/trace minerals, and nutritional parameters such as fats, FAMEs, and amino acids, participants will discover optimized, practical workflows tailored to real-world food and feed testing.</strong></p><h4><strong>Session: Total fat, FAMEs, and amino acids: modern sample prep workflows for nutritional analysis</strong></h4><p>Determinations of total fat, FAMEs, and amino acids are fundamental to nutritional labeling and product development, yet traditional workflows can be labor-intensive and solvent-heavy.</p><p>In this webinar session, we will present modern microwave-based approaches for extraction and hydrolysis that <strong>simplify workflows, improve reproducibility, and reduce solvent use</strong>. Through real application examples, we will show how these technologies enable <strong>faster, safer, and more consistent preparation of samples</strong> for nutritional analysis. Participants will learn how to streamline complex workflows while maintaining high analytical performance.</p><blockquote><p><strong>Speaker:</strong> Luca Rota (Application Specialist, Milestone)</p></blockquote>

Milestone: Food & Feed Sample Preparation Webinar Series

Total fat, FAMEs, and amino acids: modern sample prep workflows for nutritional analysis

Learn modern sample prep for fat, FAMEs, and amino acids using microwave extraction and hydrolysis to improve speed, reproducibility, and efficiency.

Total fat, FAMEs, amino acids: modern sample prep

<p><strong>Oxygen (O2) plays a vital role in winemaking, shaping the sensory character of the finished wine by influencing aroma, mouthfeel, and overall flavor. Because of this, monitoring and managing dissolved oxygen is important not only during fermentation, but throughout several stages of production.</strong></p><p>Carbon dioxide (CO2) is just as significant. While it is naturally produced during fermentation, the amount that remains in the final wine can strongly affect taste, texture, and the perception of freshness. Getting CO2 levels right helps ensure the wine expresses the style and balance you intended.</p><p>Despite the importance of both gases, measurements are often performed incorrectly, or the results are not fully understood. In this webinar, we will walk through practical approaches to measuring O2 and CO2 in wine and discuss how to interpret the data with confidence. You will gain useful insights to help verify product quality during and after production, supporting consistent, high-quality results in every bottle.</p><h4><strong>During this webinar, you will learn:</strong></h4><ul><li>The importance of measuring CO2 and O2 throughout the winemaking process.</li><li>Causes for CO2 and O2 increases and decreases throughout the process.</li><li>How CO2, O2, and N2 interact with each other in wine, both in bottle and in tank.</li></ul><blockquote><p><strong>Speaker: </strong>John Nutt</p><p>John Nutt is a Territory Sales Manager at Anton Paar USA, specializing in analytical solutions for the wine industry. He holds a BSc and MSc in Winemaking, a WSET Level 3 certificate, and a Certificate in Wine Business. With over 10 years of experience within the wine industry, including as a winemaker and brewer, John now combines practical production knowledge with advanced technical expertise to ensure the success of clients and customers.</p></blockquote>

Anton Paar: Expert Winemaking: Monitoring CO2 and O2 to Ensure Final Product Quality

Expert Winemaking: Monitoring CO2 and O2 to Ensure Final Product Quality

Measure O₂ and CO₂ in wine with confidence. Learn how gases affect aroma, texture, and quality across the winemaking process.

Monitoring CO2 and O2 to Ensure Final Product Quality

<p><strong>As lipid nanoparticle (LNP)-based therapeutics diversify and regulatory expectations for complex nucleic acid products mature, analytical strategies must evolve. Modern LNP characterization now requires integrated workflows that can simultaneously assess particle size, quantify payload, and detect critical impurities.</strong></p><p>In this SelectScience® webinar, Dr. Mojca Tajnik Sbaizero, a specialist with 10 years of experience in downstream processing for viral and non‑viral delivery, will be joined by Tristan Kovačič, who leads formulation development for non‑viral nucleic acid delivery at Sartorius BIA Separations. Together, they will demonstrate how emerging chromatographic platforms enable multi‑parameter LNP characterization and support robust, scalable analytical strategies across diverse delivery systems. They will also show how these same approaches help generate functional, uniform LNP particles for final drug product development.</p><p>As LNP complexity increases, these experts will outline the growing need to separate distinct particle subpopulations and explain how advanced chromatographic separations enhance consistency, safety, and overall product understanding, ultimately strengthening progress in drug development.</p><h4><strong>Who should attend?</strong></h4><ul><li>Professionals in biopharmaceuticals</li><li>Formulation Scientists</li><li>Healthcare Professionals</li><li>Research and Manufacturing Scientists</li></ul><h4><strong>What will this webinar cover?</strong></h4><ul><li>Chromatographic solutions for LNP drug products across both analytical and preparative scales.</li><li>Practical case studies demonstrating innovative chromatographic technologies applied to multiple LNP formulations.</li><li>How emerging chromatographic strategies enable the separation and characterization of LNP subpopulations.</li><li>How these advances support safer, more consistent, and regulatory-ready LNP therapeutics.</li></ul><blockquote><p><strong>Speaker:&nbsp;</strong>Dr. Mojca Tajnik Sbaizero (Head of Product-Application Area, Sartorius BIA Separations)</p><p>Dr. Mojca Tajnik Sbaizero is Head of Product–Application Area at Sartorius BIA Separations. She is a biotechnologist with a PhD in Biomedicine from the University of Ljubljana. During her PhD and post-doctoral academic work in the UK and Italy, her research focused on pre‑mRNA processing and therapeutic approaches for genetic diseases involving alternative splicing.</p><p>Since joining Sartorius BIA Separations in 2016, she has specialized in downstream processing of viral and non‑viral delivery vectors. She is the author of several scientific publications and a patent in this field, supervises graduate students, and leads the Virus and Nanoparticle Innovation group.</p><p><strong>Speaker:&nbsp;</strong>Tristan Kovačič (Project Manager, Sartorius BIA Separations)</p><p>Tristan Kovačič is a Project Manager at Sartorius BIA Separations, responsible for the development of novel methods for analytics, purification and formulation of non viral delivery of nucleic acids. He has experience in small molecule synthesis and large molecule analytics and formulation, and is passionate about the development of novel pharmaceuticals. He holds an MSci from Imperial College London.</p><p><strong>Moderator: </strong>Olivia Long (Editorial Team, SelectScience)</p><p>As a Science Editor specializing in pharmaceutical and applied research, Olivia Long brings a strong background in experimental biology and scientific communication. She holds a B.Sc. in Pharmacology from the University of Southampton and an M.Sc. in Neuroscience from the University of Sussex, where she investigated neuro‑oncology drug‑resistance pathways using patient‑derived cell models.</p><p>Her broader laboratory experience spans R&amp;D hygiene testing, controlled environment entomology workflows, and protocol development, giving her a practical understanding of diverse analytical and research environments. She is dedicated to translating complex science into clear, engaging content for researchers and industry professionals.&nbsp;</p></blockquote>

Select Science: Revealing hidden LNP subpopulations with high‑resolution chromatographic techniques

Revealing hidden LNP subpopulations with high‑resolution chromatographic techniques

How emerging chromatographic platforms enable multi‑parameter LNP characterization

Revealing hidden LNP subpopulations

<p><strong>In this webinar, you will learn about the analytical techniques and best practices for testing polymer-based advanced materials, from early R&amp;D through to production quality control. Discover how to leverage both macro- and micro-level IR analysis to optimise formulations and enhance material performance. Learn how to maximise the value of your thermal analysis instrumentation to diagnose production issues, evaluate VOCs, and support reverse‑engineering projects.</strong></p><p>This webinar is highly relevant to key industrial markets working with adhesives, sealants, coatings, paints, and 3D‑printing additives. Technologies covered will include <strong>FTIR, TGA</strong>, and hyphenated techniques such as <strong>TG‑IR and TG‑IR‑GC/MS.</strong></p><p>Join the free webinar with certification of attendance and CPD points now. &nbsp;</p><h4><strong>Attend the Webinar to Learn:</strong>&nbsp;</h4><ul><li>Which analytical techniques and best practices are most effective for characterising polymer‑based advanced materials</li><li>How to apply macro‑ and micro‑level IR analysis, alongside thermal analysis, to optimise formulations, enhance performance properties, and diagnose production issues.</li><li>Benefits of hyphenated techniques (TG‑IR and TG‑IR‑GC/MS) for real‑world applications</li></ul><h4><strong>This Webinar is Ideal For:</strong></h4><ul><li>Materials scientists</li><li>Polymer researchers</li><li>Lab managers</li><li>Meet the Webinar Speakers</li></ul><blockquote><p><strong>Speaker: </strong>Nicholas Lancaster (Application scientist, PerkinElmer)</p><p>Nic is an application scientist in the R&amp;D team at PerkinElmer. With a background in materials characterization using FTIR &amp; UV/Vis spectroscopy, thermal analysis as well as chromatography and mass spectrometry he has been a part of PerkinElmer since 2014. He joined PerkinElmer as a Field Application Scientist (FAS) in South Africa, and now works from the UK developing laboratory workflow solutions for a range of end markets including renewable energy, lubricants, and advanced materials.</p><p><strong>Speaker: </strong>Dr Krystelle Mafina (Product leader, PerkinElmer)</p><p>Krystelle is a product leader at PerkinElmer, overseeing the thermal (TEA) analysis business. She holds a PhD in Biomedical Biomaterials Science and is a Chartered Engineer (CEng) and Chartered Scientist (CSci) with a strong background in materials science. A member of the Institute of Materials, Minerals, and Mining (IOM3) since 2009; a committee member since 2019, Krystelle is committed to continuous professional development and was recently made 'Fellow' of the institute. Her blend of scientific knowledge and industry experience makes her a valuable contributor to PerkinElmer and the wider scientific community.</p></blockquote>

Azom: Analysis Masterclass for Polymer-Based Advanced Materials

Analysis Masterclass for Polymer-Based Advanced Materials

Which analytical techniques and best practices are most effective for characterising polymer‑based advanced materials

<h3><strong>Real-Time Process Insights for Oil, Gas, &amp; Future Fuels with Raman Spectroscopy</strong></h3><h4><strong>A 5-Part Webinar Series</strong></h4><p>As the energy sector shifts toward more complex and dynamic processes, real-time analytics are essential for maintaining control, efficiency, and product quality. This 5-part webinar series explores how process Raman spectroscopy and integrated measurement solutions enable fast, in-line analysis across oil &amp; gas, power generation, and emerging energy applications.</p><h5><strong>What we'll cover:</strong></h5><p>Each session highlights practical approaches to improving process visibility, reducing analytical delays, and supporting faster decision-making for:</p><ul><li>Natural gas</li><li>Refined fuels</li><li>Hydrogen</li><li>Sustainable aviation fuels</li><li>Carbon capture</li><li>Power generation</li><li>Emerging energy applications</li></ul><h5><strong>This Series is Ideal For:</strong></h5><p>Process, operations, and instrumentation professionals across oil &amp; gas, power generation, and emerging energy sectors, including engineers, plant and refinery managers, and technical specialists involved in process optimization and analytical measurement.</p><h5><strong>Join the Webinars To:</strong></h5><ul><li>Understand how real-time, in-line analytics improve process control and efficiency</li><li>Learn how process Raman simplifies and accelerates gas and liquid analysis</li><li>Explore alternatives to traditional methods such as gas chromatography</li><li>See how integrated measurement solutions enhance operational visibility</li><li>Gain insight into applications across conventional and next-generation energy systems</li></ul><h4><strong>Webinar 2: Real-Time Raman Gas Analysis for Today’s Power Generation: Natural Gas, Hydrogen Blending, and Fusion</strong></h4><p>In today’s power generation landscape, fuel composition, across natural gas, hydrogen blends, and emerging fusion environments, matters more than ever. Variability in these gases can directly impact turbine efficiency, emissions, and overall performance - making fast, accurate analysis essential.</p><p>This webinar highlights how process Raman spectroscopy delivers real-time, inline measurement of gas composition without the delays and complexity of traditional methods. From conventional natural gas streams to hydrogen blending and next-generation nuclear fusion applications, Raman enables smarter, faster decisions that keep operations running at peak performance.</p><p>Join us to see how this technology is advancing power generation through simplified deployment, minimal maintenance, and immediate results across a wide range of energy applications.</p><blockquote><p><strong>Speaker: </strong>Parag Borgaonkar (Senior Business Development Specialist, Thermo Fisher Scientific)</p></blockquote>

Thermo Fisher Scientific: Real-Time Process Insights for Oil, Gas, & Future Fuels with Raman Spectroscopy

Real-Time Raman Gas Analysis for Today’s Power Generation: Natural Gas, Hydrogen Blending, and Fusion

how process Raman spectroscopy enables real-time gas composition analysis for natural gas, hydrogen blending, and advanced power generation applications.

Real-Time Raman Gas Analysis for Today’s Power Generation

<p><strong>Protein formulation labs face challenges every day: more samples to test, increasingly complex candidates, and shorter timelines. Optimizing stability, manufacturability, and developability requires extensive excipient screening across multiple parameters, all in less time than ever before.</strong></p><p>In this SelectScience<sup>®</sup> webinar, biophysical characterization expert Dr. Andre Mueller will demonstrate how to use Aunty to speed up formulation studies from weeks to days using high-throughput, multi-attribute characterization in a 96-well SBS-format quartz plate. By combining full-spectrum DSF, SLS, and DLS in a single experiment, you can gather all the melting and aggregation data necessary to make faster, more informed decisions while improving efficiency. Automation-ready workflows keep grinding out results long after you have called it a day.</p><p>Dr. Mueller will review a DoE-based excipient screen of three antibodies and an enzyme that identified major stability drivers in a single experiment. He will also peek into colloidal parameters k<sub>D</sub> and B<sub>22</sub>, as well as freeze/thaw performance to provide a more complete picture of formulation behavior.</p><p><strong>Certificate of attendance</strong></p><p>If you attend the live webinar, you will automatically receive a certificate of attendance, including a learning outcomes summary, for continuing education purposes. If you view the on-demand webinar, you can request a certificate of attendance by emailing editor@selectscience.net.</p><p><strong>Webinar details</strong></p><ul><li>Cost: Free to attend</li><li>Location: Online</li><li>Duration: 60 minutes</li></ul><p><i>Registration is required to secure your place. If you register but can’t attend live, you will receive a link to the on‑demand recording once it becomes available.</i></p><blockquote><p><strong>Presenter: </strong>Dr. Andre Mueller (Director, Product Management, Unchained Labs)</p><p>Dr. Andre Mueller earned his PhD at the Carlsberg Laboratory and had a post-doc appointment at Stanford University. Dr. Mueller now acts as Director, Product Manager for Aunty &amp; Honeybun at Unchained Labs. His expertise covers fluorescence, static light scattering, and dynamic light scattering for biophysical characterization of proteins and viral vectors. His research experience spans from structural biology to plant physiology and across labs in Germany, Sweden, Denmark, and the USA. </p><p><strong>Moderator: </strong>Matilde Marques (Assistant Editor, SelectScience)</p></blockquote>

Related content

News from LabRulezICPMS Library - Week 21, 2026

From Raw Signals to Reliable Results: Post-Acquisition Data Workflows in ICP Analysis

Advances in Chromatography and Electrophoresis & Chiranal 2026 - Programme