This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Separation Science

Agilent Technologies

Technology Networks

SelectScience

...
<blockquote>
Presenter: Scott Melis, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Scott Melis has a PHD in Physics from Georgetown University in Washington, DC and started with Agilent in 2021 as a Molecular Spectroscopy Application Scientist. In his graduate work, Scott studied nanoparticle formation and growth for a variety of applications. Projects that he worked with include developing processes to deposit and characterize semiconducting molecular nano-cocrystals for use in optoelectronic devices as well as controlling polymer nanoparticle size through rapid mixing conditions.
</blockquote>

Agilnt Technologies: UV/Vis Software Bootcamp

UV/Vis Software Bootcamp

In this ICP-MS MassHunter Software “How to…..” webinar series, we pick a most-frequent-asked topic each week and give a brief demonstration and discussion on the subject.
Topics include, but are not limited to, Building a batch template, Half mass correction, Reporting templates, and IntelliQuant, to name a few. You don’t want to miss them! Come with all your questions for our immediate answers!
<blockquote>
Presenter: Yan Cheung, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: ICP-MS MassHunter How To: What are and How to use Templates

ICP-MS MassHunter How To: What are and How to use Templates

Topics include, but are not limited to, Building a batch template, Half mass correction, Reporting templates, and IntelliQuant, to name a few.

The scientific experience is critical to the success and efficiency of the entire laboratory ecosystem – from software and instruments to workflows and processes. Scientists need to be able to focus on their critical work, and not be burdened by challenges such as siloed data, manual processes, and old technology. It is critical that organizations keep pace with technological and scientific advancements, as those changes have a direct impact on how a lab operates.
The way that laboratory personnel need to interact with software, instruments, equipment, and systems makes a significant impact on their daily work. Access to mobile applications, barcode-driven workflows, voice control capabilities, and extended reality software provides innovative and easier ways for scientists to achieve their goals. New automation capabilities improve efficiency, eliminating manual intervention and streamlining processes and workflows in the lab. Improved tools, such as enhanced dashboards and new AI/ML capabilities, deliver knowledge from data and empower the scientist to make faster, more informed decisions. Lab software solutions built with pre-configured QA/QC capabilities provide an intuitive, easy process to execute typical scientific workflows with minimal training.
<h5>By attending this presentation you will learn about:</h5>
<ul>
<li>Novel ways to interact with LIMS - Mobile, barcode driven workflows, voice control, and extended reality</li>
<li>Delivering knowledge from data – Dashboards and data analytics, including AI/ML capabilities</li>
<li>Automation solutions - Drive Business Intelligence, eliminate manual intervention, and improve efficiency</li>
<li>Intuitive workflows – Easier, more simplified processes with pre-configured QA/QC capabilities</li>
</ul>
<blockquote>
Presenter: Nicola Gardner (Senior Manager, Product Marketing – Digital Science Solutions, Thermo Fisher Scientific)
</blockquote>
<blockquote>
As Sr. Manager, Product Marketing for the Digital Science Solutions business at Thermo Fisher Scientific, Nicola leads the marketing strategy around our product portfolio, and describes to customers how they can apply laboratory software to move towards a smarter lab and digitally transform their business. A Masters in Analytical Chemistry and a wealth of laboratory experience provides Nicola with a solid understanding of process, data, and connectivity challenges. Nicola helps to drive discussion around technology adoption to inform businesses on their digital transformation journey and to enable scientists to spend more time focusing on science.
</blockquote>

Pixabay/Photo Mix: Enhancing the scientific experience using laboratory software

Enhancing the scientific experience using laboratory software

Novel ways to interact with LIMS. Delivering knowledge from data. Automation solutions. Intuitive workflows.

The scientific experience using laboratory software

In this ICP-MS MassHunter Software “How to…..” webinar series, we pick a most-frequent-asked topic each week and give a brief demonstration and discussion on the subject.
Topics include, but are not limited to, Building a batch template, Half mass correction, Reporting templates, and IntelliQuant, to name a few.
You don’t want to miss them! Come with all your questions for our immediate answers!
<blockquote>
Presenter: Yan Cheung, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: ICP-MS MassHunter How To: What is and How to use Half Mass Correction

ICP-MS MassHunter How To: What is and How to use Half Mass Correction

ICP-MS MassHunter How To: How to use Half Mass Correction

In this ICP Expert ICP-OES Software “How to…..” webinar series, we pick a most-frequent-asked topic each week and give a brief demonstration and discussion on the subject.
Topics include, but are not limited to, Inter Element Correction (IEC) Factors, Advanced Valve System (AVS), and Fast Automated Curve-fitting Technique (FACT), to name a few. You don’t want to miss them! Come with all your questions for our immediate answers!
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>

Agilent Technologies: ICP Expert How To: Advanced Valve System (AVS) for ICP-OES

ICP Expert How To: What is it and How to set up an Advanced Valve System (AVS) for ICP-OES

Topics like Inter Element Correction (IEC) Factors, Advanced Valve System (AVS), and Fast Automated Curve-fitting Technique (FACT), etc...

ICP Expert How To: Advanced Valve System (AVS) for ICP-OES

Agilent&#39;s Cary 3500 Flexible UV-VIS Spectrometer provides the accuracy and reliability needed for meeting compliance standards.
This presentation will discuss an overview of the instrument&#39;s newest functions as well as the software&#39;s ability to maintain data integrity through Agilent&#39;s OpenLab Platform.
<blockquote>
Presenter: Scott Melis, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Scott Melis has a PHD in Physics from Georgetown University in Washington, DC and started with Agilent in 2021 as a Molecular Spectroscopy Application Scientist. In his graduate work, Scott studied nanoparticle formation and growth for a variety of applications. Projects that he worked with include developing processes to deposit and characterize semiconducting molecular nano-cocrystals for use in optoelectronic devices as well as controlling polymer nanoparticle size through rapid mixing conditions.
</blockquote>

Agilent Technologies: Meeting 21 CFR 11 Compliance with the Cary 3500 Flexible UV-VIS Spectrometer

Meeting 21 CFR 11 Compliance with the Cary 3500 Flexible UV-VIS Spectrometer

We will discuss an overview of the instrument's newest functions as well as the software's ability.

Meeting 21 CFR 11 Compliance with the Cary 3500 UV-VIS

Focus will be given to the safety, authenticity and quality of food and beverages as well as the future of food products such as meat substitutes and alternative proteins.
This online symposium will cover:
<ul>
<li>Untargeted food analysis using different MS platforms</li>
<li>Applications of near-infrared hyperspectral imaging in food quality control</li>
<li>Applications of behavioral science in food research</li>
<li>Solid phase micro-extraction for beverage analysis</li>
<li>Challenges and opportunities in fermentation for production of alternative proteins</li>
<li>ELNs to support data management in food and beverage labs</li>
<li>Key strategies for pesticide analysis using GC-MS</li>
<li>Nutritional and toxic plant-based elemental analysis using ICP-MS</li>
</ul>
<blockquote>
Presenter: Brian Quinn, PhD (Head of Mass Spectrometry, Queen&#39;s University Belfast)
</blockquote>
<blockquote>
Presenter: Vincent Baeten, PhD (Scientific Director, Walloon Agricultural Research Centre)
</blockquote>
<blockquote>
Presenter: Michelle Niedziela, PhD (VP of Research &amp; Innovation, HCD Research)
</blockquote>
<blockquote>
Presenter: Erich Leitner, PhD (Professor, Graz University of Technology)
</blockquote>
<blockquote>
Presenter: Stefan Cretnik, PhD (Product Manager, PAL System)
</blockquote>
<blockquote>
Presenter: Theresa Liao (Content Specialist, SciNote)
</blockquote>
<blockquote>
Presenter: Wade Opperman (Manager of the Americas, SciNote)
</blockquote>
<blockquote>
Presenter: Moran Farhi, PhD (VP of Research, The Better Meat Co.)
</blockquote>
<blockquote>
Presenter: Liyan Xing, PhD (Senior Application Scientist, PerkinElmer)
</blockquote>
<blockquote>
Presenter: Anastasia Andrianova, PhD (GC/MS Applications Scientist, Agilent Technologies)
</blockquote>

Technology Networks: Advances in Food & Beverage Analysis 2023

Advances in Food & Beverage Analysis 2023

The third edition of this online symposium will provide industry and academic scientists with the opportunity to hear from experts from across the field.

Join us for this interactive panel discussion where laboratory professionals from across multiple markets and industries share success stories of how they navigated the journey to lab digitalization, from strategy and planning to implementation and optimization.
They will share lessons learned and best practices to best harness the power of digital technologies to improve efficiency, quality, and innovation in the lab.
Plus, you&#39;ll have the opportunity to engage with top managers from Agilent&#39;s lab digitalization team, who will share their expertise and insights on the latest trends, technologies, and best practices. They will provide an overview of Agilent&#39;s digital lab solutions and answer your questions about how to get the most out of your lab&#39;s transformation.
Key learning objectives
<ul>
<li>The benefits and challenges of lab digitalization, and how to overcome common obstacles
</li>
<li>Strategies for selecting and integrating the right digital solutions for your lab&#39;s unique needs
</li>
<li>Best practices for implementing and utilizing your digital lab environment
</li>
</ul>
Who should attend?
<ul>
<li>Laboratory Managers, laboratory directors, IT Managers, business IT, scientists, operations manager</li>
</ul>
<blockquote>
Presenter: Dr. Eliot Randle (SVP Digital Transformation, Digital Lab Consulting)
</blockquote>
<blockquote>
Dr. Eliot Randle is Senior Vice President of Digital Transformation Digital Lab Consulting (DLC). DLC is part of the ProPharma Group and provides independent strategic and business consulting to help organisations to transform their business through better use of data and technology.
</blockquote>
<blockquote>
Presenter: Eric Kemp (IT Manager, Modern Canna)
</blockquote>
<blockquote>
Eric Kemp is a seasoned professional with 15+ years of experience in IT and Analytical Chemistry. He has held diverse roles such as Lab Tech, Analyst, Systems Administrator, Entrepreneur, QA Manager, and IT Manager since 2008. In 2012, Eric founded an IT consulting business specializing in Laboratory Information Management Systems (LIMS) re-implementation for Florida markets. Joining Modern Canna in 2018, Eric has contributed expertise to drive innovation and efficiency in both fields. With a unique perspective at the intersection of IT and Analytical Chemistry, Eric brings valuable insights to the cannabis testing industry.
</blockquote>
<blockquote>
Presenter: Tony McKeown (LIMS Administrator, doTERRA Global)
</blockquote>
<blockquote>
Tony McKeown, from Cobh, County Cork, Ireland, is a highly accomplished individual with a strong background in IT. He graduated from Munster Technological University with a degree in IT and then embarked on a successful 12-year self-employment journey. In September 2021, Tony joined doTERRA Global, based in Blarney, Co Cork, Ireland, where he played a pivotal role in the organization&#39;s digital transformation initiative.
</blockquote>
<blockquote>
Tony&#39;s primary responsibility at doTERRA Global was to identify and implement a Laboratory Information Management System (LIMS) for its onsite laboratories. Leveraging his expertise and knowledge, he successfully sourced and introduced Agilent SLIMS in May 2023, marking a significant milestone in the company&#39;s digitalization journey.
</blockquote>
<blockquote>
Beyond his profession, Tony is an avid sports fan, and has a keen interest in politics and current affairs.
</blockquote>
<blockquote>
Presenter: Jean-Guillaume Baumann (Senior Product Marketing Manager, Digital Lab, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jean-Guillaume joined Agilent Technologies in 2018 through the acquisition of Genohm as a Business Development Manager. Holding a Master’ degree in Mathematics, he graduated in 2015 from the University of Neuchâtel with a Master’s degree with honors in Mathematics with a specialization in computer science. Passionate about the business side also, he studies for an EMBA at University of Lausanne.
</blockquote>
<blockquote>
Presenter: Dr. Thomas Schmidt (Marketing Director, Digital Solutions, Software &amp; Informatics Division)
</blockquote>
<blockquote>
Thomas Schmidt is Marketing Director for Digital Solutions in the Software &amp; Informatics Division at Agilent Technologies. Originally a chemist by training, he conceptualized and managed multiple Laboratory Informatics solutions during his career covering all aspects of the laboratory operation, including workflow management, data management, sample management, instrument control, and laboratory execution systems. Thomas is a passionate ambassador for the Digital Laboratory.
</blockquote>
<blockquote>
Presenter: Dora Wells (Editorial Team, SelectScience)
</blockquote>
<blockquote>
Dora studied biomedical science at the University of Manchester, UK, and as a member of the editorial team, plays an integral role in helping to shape the content on SelectScience.
</blockquote>

LabRulez/AI: From Paper to Pixels: Success stories of laboratories embracing digitalization

From Paper to Pixels: Success stories of laboratories embracing digitalization

Success stories of how they navigated the journey to lab digitalization, from strategy and planning to implementation and optimization.

Success stories of laboratories embracing digitalization

Every organization has unique needs regarding their laboratory processes, workflows, and overall mission.
When considering ways to meet those needs, it is vital that an organization evaluates the potential resources they can implement, from laboratory instrumentation to software solutions. The goal is to add value and increase optimization. 
Selecting a software solution is a decision that will have a direct, intense impact on your lab. It will affect how efficiently your staff works, how streamlined your processes are, and how accurately your work can be accomplished. You want to make sure that the impact is positive. A laboratory information management system (LIMS) is a necessary resource because it can store and aggregate your data in one place, streamline your workflows and processes, and increase efficiency, reliability, and value – all which are limited when managed manually. It’s important to choose a solution that is easy-to-use, with minimal customization that addresses the key challenges of your industry and can integrate with existing instrumentation and software systems. Understand the key considerations when selecting a LIMS to best meet your goals and elevate your lab.
By attending this presentation you will learn about:
<ul>
<li>The value of choosing a LIMS solution that meets your laboratory’s requirements and needs
</li>
<li>The impact of making the right choice to elevate your lab’s productivity, efficiency, and ability to deliver high quality results
</li>
</ul>
<blockquote>
Presenter: Adam Collins (Senior Product Specialist, Digital Science Solutions, Thermo Fisher Scientific)
</blockquote>
<blockquote>
As Senior Product Specialist for Digital Science Solutions at Thermo Fisher Scientific, Adam specializes in providing software demonstrations and technical support for organizations across multiple industry sectors who are assessing Thermo Fisher Scientific’s LIMS solutions for their laboratory needs. He has over five years of experience as a technical product specialist for laboratory software. Adam has Doctor of Philosophy and Bachelor of Science degrees in Microbial Genetics and Microbiology from the University of Nottingham.
</blockquote>

Separation Science: How to choose the right LIMS solution

How to choose the right LIMS solution

Understand the key considerations when selecting a LIMS to best meet your goals and elevate your lab.

Choosing the right LIMS is a challenge, but it can be accomplished with sufficient research and strong compatibility between your organization’s needs and the functionality of the software.
Once companies have selected the right LIMS, they will need to embark on the next stage of their journey – implementation. It is imperative that your implementation project is successful and efficient, driven by the strategic partnership and common goals that you and your vendor have established.
In this webinar, we will discuss how to achieve a successful laboratory software installation:
<ul>
<li>Consider resources - a successful project needs key stakeholder involvement. What&#39;s usually expected from a customer? Who should be involved, and how much time will they need to commit?
</li>
<li>What are you looking to solve? You will have thought about this while selecting your solution, but you must revisit this to ensure you stay on track and understand the true scope of your project.
</li>
<li>Key LIMS project management considerations - Keep things simple, know your scope, work in phases. We&#39;ll cover all the common pitfalls of lab software projects and how to avoid them.
</li>
<li>Looking ahead. Your LIMS project doesn&#39;t stop when you go live. How can you ensure ongoing success through the life of your LIMS?
</li>
</ul>
By attending this presentation, you will:
<ul>
<li>learn how to elevate your laboratory with a successful LIMS implementation
</li>
<li>understand the important aspects of the implementation journey
</li>
<li>see how a successful implementation can ensure ongoing success for your organization
</li>
</ul>
<blockquote>
Presenter: Anand Radhakrishnan (Services Manager – Digital Science Solutions, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Anand Radhakrishnan is the Services Manager for the Digital Solutions division at Thermo Fisher Scientific. Anand has an extensive background in customer relations and implementation strategies among life sciences and R&amp;D organizations. He joined Thermo Fisher in 2018 as a Senior Global Customer Success Manager, ensuring implementations of LIMS across customers, and transitioned to a Services Manager leading the Digital Solutions technical implementation team in September 2020. In his current role, he leads a team of specialists as they support technical implementation of LIMS in pharmaceutical, diagnostic, and quality control laboratories to execute the customer’s R&amp;D digital transformation strategy. Anand has a Ph.D. in Biochemistry and Microbiology from the Max Planck Institute for Biophysical Chemistry, an M.Sc in Molecular Biology from the International Max Planck Research School, and a Bachelor’s Degree in Biochemistry from the University of Malaya.
</blockquote>

Separation Science: Elevate your lab: How to manage a successful LIMS implementation

ICPMS webinars focusing on Software - page 8

Elevate your lab: How to manage a successful LIMS implementation