This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent Technologies

Quantum Analytics

SelectScience

Wiley

C&EN

Transmission Raman spectroscopy (TRS) is a variant of Raman spectroscopy which is advantageous in probing bulk content of diffusely scattering samples. Spatially offset Raman spectroscopy (SORS) is a variant of Raman spectroscopy that allows highly accurate chemical analysis of objects beneath obscuring surfaces. TRS is used in Agilent TRS100 Raman system for fast assay of tablets, capsules, and other dosage forms. SORS is used in Agilent RapID and Vaya systems for see-through barrier verification applications.
This online seminar provides a comprehensive introduction to the TRS and SORS technologies and their applications.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technology: Fast assay of Tablets, Capsules, and other Dosage forms using Transmission Raman Spectroscopy and SORS Raman Spectroscopy

Fast assay of Tablets, Capsules, and other Dosage forms using Transmission Raman Spectroscopy and SORS Raman Spectroscopy

This online seminar provides a comprehensive introduction to the TRS and SORS technologies and their applications.

Tablets, Capsules by Raman Spectroscopy and SORS

Agilent Technologies Molecular Instrumentation and Applications...
<blockquote>
Presenter: Mark Fisher, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark, an Application Scientist for Agilent Technologies, has over 30 years of experience in molecular spectroscopy. He has held roles in Agilent&#39;s UV-Vis-NIR, fluorescence, and atomic absorption product portfolios. In addition to identifying industry trends and new business needs, Mark&#39;s responsibilities include application development, pre and post-sales support, as well as acting as a customer advocate for new product and technology opportunities. Mark received his doctorate in analytical chemistry from the University of Nebraska-Lincoln.
</blockquote>

Demystifying Molecular Instrumentation and Applications

Agilent Technologies Molecular Instrumentation and Applications...

Two of the biggest challenges analysts face in the analytical lab are verifying product quality and identifying unknown contaminants. It is also common to look to reverse engineer competitor products. Infrared and Raman spectroscopies are ideal tools for these analyses, as they are non-destructive and non-invasive methods. FTIR and Raman are also very highly specific, as each molecule has its own corresponding fingerprint in the region of the electromagnetic spectrum where the analyses are performed. These analyses can also be conducted most readily even in the most stringent regulatory environment. Tiered user access and a locked data pool are only a few of the features of a fully integrated and compliant platform meeting FDA and other regulatory requirements.
During this webinar, we’ll cover the theory of FTIR and Raman spectroscopies and why they work so well for even the most challenging samples. The management of regulatory requirements in the modern lab will also be discussed.
Key Webinar Take-Aways:
<ul>
<li>IR and Raman offer quick and reliable identification of unknown compounds.</li>
<li>Regulatory requirements are easy managed with Bruker hardware and software platform.</li>
<li>Quality assurance of product and raw materials is reliably performed with Raman and IR.</li>
</ul>
<blockquote>
Presenter: Dr. Tom Tague (Applications Manager, Bruker Corporation)
</blockquote>
<blockquote>
Dr. Tom Tague is the Applications Manager for Bruker Optics. He is also a member of the Visiting Advisory Committee of the Metropolitan Museum of Art in New York and the Strategic Advisory Board of Amplified Sciences. Dr. Tague received his Ph.D. from the University of Utah in Physical Chemistry and his B.S. also in Chemistry from the University of Texas at San Antonio. He also conducted his postdoctoral research at the University of Virginia working with Professor Lester Andrews. He is a member of the American Chemical Society, Society for Applied Spectroscopy, American Physical Society, and the Optical Society of America. Dr. Tague is active in developing new methods and instrumentation with the goal of improving the sensitivity and detection limits of spectroscopy related applications. Tom has more than 90 publications and 5 Patents.
</blockquote>

Pixabay/Gerd Altmann: Maximizing the Power of Spectroscopy in Your Regulated Analytical Laboratory

Maximizing the Power of Spectroscopy in Your Regulated Analytical Laboratory

Infrared and Raman spectroscopy are ideal tools for verifying product quality, identifying unknown contaminants, and reverse engineering competitive products.

Power of Spectroscopy in Regulated Analytical Laboratory

Thousands of polymeric compounds and materials have been developed over the years to optimize the properties and performance of products spanning nearly every industry. There are a few areas where characterizing these products can be important: first is performing a quick polymer identification for recycling purposes; second is quality control to identify product defects or failures; and third is reverse engineering to facilitate product development in a highly competitive marketplace.
Infrared (IR) and Raman spectroscopy are especially useful for the analysis of polymers in an industrial setting because in most cases it does not require sample preparation or expensive consumables. Examples will be presented demonstrating the effectiveness of IR and Raman analysis in each of these categories.
Mass Spectrometry (MS) has become an indispensable tool for polymer analysis and has been widely used to study polymer structure and composition, end groups and additives, molecular weight distribution, and so on. MS analysis is extremely sensitive, allowing the detection and identification of minor polymer components and synthesis by-products, as well as low-level impurities and products of decomposition. Matrix Assisted Laser Desorption Ionization (MALDI) allows performing rapid MS analysis without lengthy pre-separation and with minimal sample preparation. MALDI MS can provide structural and copolymer composition information, as well as be used for imaging of polymer surfaces, characterization of complex polymer mixtures, and many other analytical tasks.
In this webinar, we will discuss several MS analytical techniques and their applications for polymer analysis using real-life examples from the industry and academia.
<blockquote>
Presenter: Sergey V. Shilov, Ph.D. (R&amp;D Product Manager for North America, Bruker Optics)
</blockquote>
<blockquote>
Dr. Sergey V. Shilov is the R&amp;D Product Manager for North America at Bruker Optics. Sergey joined Bruker in 2001. He is responsible for the support and development of new applications for the Bruker research FTIR systems. He received his Ph.D in 1992 from the Russian Academy of Sciences in Polymer Physics and his M.S. from St. Petersburg State University (Russia) in Physics in 1986. Alexander Von Humboldt foundation (Germany) awarded him research fellowship in 1996. Sergey published 37 papers in peer-reviewed journals. His research interests include time-resolved FTIR spectroscopy, surface science, polymer and life-science applications. 
</blockquote>
<blockquote>
Presenter: Kushal Modi (Business Development Manager, Polymers, and Industrial Chemicals, Bruker Applied Mass Spectrometry)
</blockquote>
<blockquote>
Kushal Modi has been serving the scientific community for over 10 years. He joined Bruker in 2022 under the Applied Mass Spectrometry division after a legacy with Waters Corporation. He is a leading expert as a Business Development Manager and is currently supporting the polymers and industrial chemical markets nationally. 
</blockquote>
<blockquote>
Presenter: Dr. Rebecca Pool (Editor Microscopy and Analysis, Wiley, Moderator)
</blockquote>
<blockquote>
Rebecca is news editor of Microscopy&amp;Analysis and a freelance science journalist with a doctorate in Materials Science. She has published in Wiley Analytical Science, Nature Photonics, SPIE Photonics Focus, Physics World, Sci Fi Generation, Engineering and Technology magazine, WorldSteel and more.
</blockquote>

Wiley Analytical Science: Effective Analysis of Polymers Using IR, Raman Spectroscopy, and MALDI-TOF Mass Spectrometry

Effective Analysis of Polymers Using IR, Raman Spectroscopy, and MALDI-TOF Mass Spectrometry

Examples will be presented demonstrating the effectiveness of IR and Raman analysis and will discuss several MS techniques and apps for polymer analysis.

Polymers Using IR, Raman Spectroscopy, and MALDI-TOF MS

Optimizing olefin isomerization typically involves time-consuming testing of both intermediate and final product. The unavoidable delay between sampling and process changes using traditional chromatographic methods fails to eliminate the need for post-production adjustments and can even result in batch loss.
In this webinar, Tiffany Adkins, Quality Manager at Aurorium, will explain how fast, specific Raman spectroscopy improved her manufacturing quality and reduced product loss. She will discuss her phased implementation approach to Raman and lessons learned, the simplicity of quantitative method development and future use cases for the technique. 
Elena Hagemann, Metrohm USA Spectroscopy Product Specialist, will give an overview of Raman spectroscopy and explain how the fundamentals of this technique make it well-suited for specialty chemicals and formulated products. 
Key Learning Objectives:
<ul>
<li>Discover how Raman spectroscopy gives quicker results than most other analytical technologies, leading to better response time to process variations</li>
<li>Gain understanding on how Raman spectroscopy can be utilized to quantify the isomerization content in olefins via the variation in present double bonds</li>
<li>Learn about overcoming implementation challenges in Raman Spectroscopy by showcasing different challenges, the approach to find solutions and the key learnings that will ease the implementation of Raman spectroscopy</li>
</ul>
Who Should Attend:
<ul>
<li>Those in the chemical industry, both specialty chemical and final product manufacturers looking to increase production quality and efficiency</li>
<li>Production and QA managers of all industries seeking solutions to get actionable data faster</li>
<li>Product development chemists seeking to design products for quality and manufacturability</li>
<li>Researchers looking for Raman measurement solutions for a variety of materials</li>
<li>Process development engineers and scientists looking for upstream/development solutions that can scale with production</li>
</ul>
<blockquote>
Presenter: Tiffany Adkins (Quality Manager, Aurorium)
</blockquote>
<blockquote>
Presenter: Elena Hagemann (Spectroscopy Product Specialist, Metrohm USA)
</blockquote>
<blockquote>
Presenter: Kelly McSweeney (Contributing Editor, C&amp;EN Media Group)
</blockquote>

C&EN: Optimize Your Process Control of Olefin Isomerization

Optimize Your Process Control of Olefin Isomerization

We will explain how fast, specific Raman spectroscopy improved manufacturing quality and reduced product loss and will give an overview of Raman spectroscopy.

This webinar will guide you on the best practices, tools, and techniques needed to get the most reliable, verifiable insights into your optical components. Appropriate choice of technique and methodology is critical to getting the information you need to improve design, verify product performance, and accelerate manufacturing.
We will explore the subtleties of reflection and transmission measurements at normal incidence and at oblique angles, emphasizing high absorbance, optical density, linearity, and effects of incident beam collimation. We will discuss diffuse scattering measurements and automation/robotics to broaden quality assurance programs and speed up analysis. 
The webinar is relevant to developers of optics, photonics, and electro-optical or semiconductor devices such as visual displays, laser-based range detection (LiDAR), optical communications systems and light-based scientific instrumentation. Improve your understanding of the link between your desired outcomes and the spectrophotometric approaches needed to achieve those insights. 
Key Learning Objectives:
<ul>
<li>The best spectrophotometric practices to extract deeper insights into the characteristics of optical samples.</li>
<li>How to overcome the limitations of traditional spectrophotometric tools and verify outcomes.</li>
<li>Accelerating QA/QC of optics in a production environment.</li>
</ul>
Who Should Attend:
<ul>
<li>Commercial or Academic organizations in the fields of optics, photonics, electro-optical, or semiconductors</li>
<li>Laboratory Managers </li>
<li>Scientist/Staff Scientists</li>
<li>Lab Technician/Technologist</li>
<li>Analyst</li>
<li>Project Manager</li>
<li>SME Directors, Core Lab/ Facility Managers </li>
<li>Under/Post Graduate Researchers</li>
</ul>
<blockquote>
Presenter: Travis Burt (Global Product Manager – Cary UV-Vis-NIR Spectrophotometers, Agilent Technologies)
</blockquote>
<blockquote>
Presenter: Catherine Dold (Health &amp; Environment Writer, C&amp;EN Media Group)
</blockquote>

C&EN: Optimizing Optics Using Advanced Spectrophotometry

Optimizing Optics Using Advanced Spectrophotometry

This webinar will guide you on the best practices, tools, and techniques needed to get the most reliable, verifiable insights into your optical components.

Verification of Incoming Raw Materials in Paper Bags, Sacks, Tubs, Bottles, and Barrels Without a Clean Room or Opening the Container using SORS Raman Technology.
<blockquote>
Presenter: Luciana Terra (Application Scientist, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Luciana Terra has a Bachelor’s degree in Industrial Chemistry from the Federal University of Alfenas (Unifal-MG) as well as a Ph.D. in Analytical Chemistry, on Chemometrics, from the State University of Campinas (Unicamp), where she developed work focused on petroleum quality and derivatives using high-resolution Mass Spectrometry, NIR, and chemometrics methodologies. As part of her Ph.D., she also worked at the University of Calgary in Canada. While completing her Master’s Degree at Unicamp, Luciana developed a new methodology for drug polymorphism detection using NIR imaging and chemometrics tools for quality assurance in the pharmaceutical industry. In 2019, she joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, Fluorescence, IR, and Raman techniques, at Agilent Technologies, in Brazil.
</blockquote>

Agilent Technologies: Identification of Incoming Raw Materials in Paper Bags, Sacks, Tubs, Bottles, and Barrels

Identification of Incoming Raw Materials in Paper Bags, Sacks, Tubs, Bottles, and Barrels

Verification of Incoming Raw Materials in Paper Bags, Sacks, Tubs, Bottles, and Barrels using SORS Raman Technology.

Identification of Materials in Bags, Sacks, Tubs, Bottles...

You might be facing challenges with respect to material identification process and its qualification.
Now, with Agilent&#39;s trusted solution - Vaya Raman Spectometer, confidently identify pharmaceutical materials and meet the performance specifications of global pharmacopoeia.
<blockquote>
Presenter: Rob WIlls (Molecular Spectroscopy Specialist, Agilent Technologies)
</blockquote>

Agilent Technologies: Raw Material ID and Raman

Raw Material ID and Raman

Challenges with respect to material identification process and its qualification.

This webinar will introduce the innovative use of Spatially Offset Raman Spectroscopy (SORS) for Raw Material Verification.
SORS provides an optimal solution for see-through verification, effectively penetrating challenging containers like amber glass and paper bags. The session will spotlight two instruments - Vaya, a handheld system, and Rapid, a portable system - both of which excel in assessing challenging materials. These devices offer a high-throughput, reliable, and convenient solution for RMV, aligning with the strict compliance requirements of the biopharmaceutical industry.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>
<blockquote>
Presenter: Scott Melis, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Scott Melis has a PHD in Physics from Georgetown University in Washington, DC and started with Agilent in 2021 as a Molecular Spectroscopy Application Scientist. In his graduate work, Scott studied nanoparticle formation and growth for a variety of applications. Projects that he worked with include developing processes to deposit and characterize semiconducting molecular nano-cocrystals for use in optoelectronic devices as well as controlling polymer nanoparticle size through rapid mixing conditions.
</blockquote>

Agilent Technologies: Identification of Raw Materials by a Handheld Instrument in Amber Glass, Paper Bags, and Other Challenging Containers

Identification of Raw Materials by a Handheld Instrument in Amber Glass, Paper Bags, and Other Challenging Containers

Innovative use of Spatially Offset Raman Spectroscopy (SORS) for Raw Material Verification.

Identification of Raw Materials by a Handheld Instrument

Hydrogen is one of the most promising energy carriers that can enable a low-carbon economy.
In this webinar, Maria Lyubimova, Hydrogen business development manager, HORIBA France, will discuss solutions for the full development and manufacturing lifecycle that are enabling a global adoption of hydrogen technologies.
Gain insight into how HORIBA is providing innovative development tools to help accelerate the adoption of hydrogen technologies. These tools allow engineers, researchers, and scientists to address tomorrow’s challenges and to improve performance, quality, and cost. Furthermore, explore HORIBA’s large panel of techniques such as Raman, fluorescence, glow discharge, particle size, ICP, AFM, ellipsometry, C/S and O/N/H analyzers, and impedance spectroscopy.
Key learning objectives
<ul>
<li>Learn more about the qualification of raw materials
</li>
<li>Understand cell and stack components research and development
</li>
<li>Learn more about the validation of processed materials
</li>
</ul>
Who should attend?
<ul>
<li>Scientists and engineers conducting R&amp;D on cells and components like bi-polar plates, gas diffusion layers, and membrane electrode assemblies for electrolysis.</li>
</ul>
<blockquote>
Presenter: Maria Lyubimova (Hydrogen business development manager, HORIBA France)
</blockquote>

SelectScience: Testing and measurement solutions for hydrogen technologies

Testing and measurement solutions for hydrogen technologies

Solutions for the full development and manufacturing lifecycle that are enabling a global adoption of hydrogen technologies.

ICPMS webinars focusing on RAMAN - page 7