This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent Technologies

SelectScience

Transmission Raman spectroscopy (TRS) is a variant of Raman spectroscopy which is advantageous in probing bulk content of diffusely scattering samples. Spatially offset Raman spectroscopy (SORS) is a variant of Raman spectroscopy that allows highly accurate chemical analysis of objects beneath obscuring surfaces. TRS is used in Agilent TRS100 Raman system for fast assay of tablets, capsules, and other dosage forms. SORS is used in Agilent RapID and Vaya systems for see-through barrier verification applications.
This online seminar provides a comprehensive introduction to the TRS and SORS technologies and their applications.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technology: Fast assay of Tablets, Capsules, and other Dosage forms using Transmission Raman Spectroscopy and SORS Raman Spectroscopy

Fast assay of Tablets, Capsules, and other Dosage forms using Transmission Raman Spectroscopy and SORS Raman Spectroscopy

This online seminar provides a comprehensive introduction to the TRS and SORS technologies and their applications.

Tablets, Capsules by Raman Spectroscopy and SORS

Agilent invites you to join our Back to Basics Live Mini Workshop: How ICP-MS Works Educational Webinar. Social distancing times can be used to brush up on this great instrument fundamentals.
During the workshop we will cover general theory on ICP-MS and each one of its components. During each segment, will discuss the different components and will follow with a live instrument demonstration.
At the end of the workshop we will open the floor for a Q&amp;A session so please bring your challenging questions for our Applications Scientist Team. Our intention is to help you get the most out of your ICP-MS instrument.
<blockquote>
Presenter: Jenny Nelson, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Jenny Nelson is an Applications Scientist with Agilent Technologies specializing in Inductively Coupled Plasma Mass Spectroscopy (ICP-MS), Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Microwave Plasma Atomic Emission Spectroscopy (MP-AES). Her broad knowledge of atomic spectroscopy has been applied to both AOAC and ASTM through her serving on expert review panels, chairing committees, and volunteering to develop new methods needed by the industry.
</blockquote>

Agilnt Technologies: Let’s go Back to Basics: A Mini Workshop on How ICP-MS Operates

Let’s go Back to Basics: A Mini Workshop on How ICP-MS Operates

During the workshop we will cover general theory on ICP-MS and each one of its components.

Let’s go Back to Basics: A Workshop on How ICP-MS Operates

Some users have questions on how Microwave Plasma compares to other Spectroscopy Techniques. What is it? Where does it fit? Primary applications for the MP.
This presentation will cover these questions as it compares to AAS and ICP techniques. Learn the advantages of each techniques and which applications are best for each.
<blockquote>
Presenter: Paul Krampitz (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Paul is a graduate of Bowling Green State University with a Chemistry Bachelor of Science degree. Twenty – five years of Spectroscopy experience mainly Inductively Coupled Plasma (ICP) Spectroscopy as well as ICP-MS and AAS. His experience also includes X-Ray Fluorescence (ED, WD), Laser Ablation, Inorganic Speciation and Microwave Plasma Spectroscopy. Market Segment expertise includes environmental, petrochemical, metallurgical applications.
</blockquote>

Agilnt Technologies: Overview of Atomic Techniques and how Microwave Plasma compares to Atomic Absorption and Inductively Coupled Plasma Spectroscopy Techniques: Which is right for you?

Overview of Atomic Techniques and how Microwave Plasma compares to Atomic Absorption and Inductively Coupled Plasma Spectroscopy Techniques: Which is right for you?

We will cover questions as it compares to AAS and ICP techniques.  Learn the advantages of each techniques and which applications are best for each.

Overview of Atomic Techniques: Which is right for you?

In this final session of a four-part ‘Fundamentals of Spectroscopy’ course, having now covered the basics, we will look at several advanced applications that do the seemingly impossible, from counting individual photons to looking inside exploding plasmas.
We will examine both the immense technical challenges involved, as well as the scientific value they provide. We will look at several recent high-profile publications and break down how they work – what novel things the results tell us about the world, what equipment was used and why, and what made the measurements so difficult and noteworthy.
<h5>Key learning objectives</h5>
<ul>
<li>Discover different camera designs such as CCDs, sCMOS, EMCCDs and intensified-gated CCDs.</li>
<li>Understand the signal-to-noise ratio in an optical measurement. Identify the distinct contributions to the overall noise. Learn about approaches to minimize sensor noise, as well as enhancing sensor sensitivity to optimize the signal-to-noise ratio in an optical measurement.</li>
<li>Discover how sensitivity in EMCCDs can be used to detect single photons in quantum optics and single molecule spectroscopy application.</li>
<li>Understand how intensified-gated CCDs can be used to obtain nanosecond time resolution in optical emission spectroscopy (OES) based plasma diagnostics.</li>
<li>Learn how intensified-gated scMOS cameras are used for high-speed, high-resolution micro-laser-induced breakdown spectroscopy (µ-LIBS) experiments.</li>
</ul>
<blockquote>
Presenter: Shayne Harrel (Andor Technology)
</blockquote>
<blockquote>
Shayne Harrel is a spectroscopy specialist for the Americas at Andor. He holds a PhD in physical chemistry from Yale University where he studied dynamical processes in charge transfer systems, magnetic materials and semiconductors using time-resolved terahertz spectroscopy. Prior to joining Andor, he was a senior applications engineer at MKS Instruments and has held previous positions as Chief Scientist-Americas for Izon Science, Senior Applications Scientist for Olympus Corporation, and as a chemist for the US Food and Drug Administration.
</blockquote>
<blockquote>
Presenter: Georgina Wynne Hughes (Editorial Team)
</blockquote>
<blockquote>
Georgina studied at Birmingham University where she gained a BSc in Biomedical Science, and an MSc by Research in Cancer and Genomic Sciences, which focused on defective autophagy in rare neurodegenerative diseases. As a member of the Editorial team, she now plays an integral role in shaping the content on SelectScience.
</blockquote>

SelectScience: Pushing the limits: Optical spectroscopy at the extremes

Pushing the limits: Optical spectroscopy at the extremes

We will look at several advanced applications that do the seemingly impossible, from counting individual photons to looking inside exploding plasmas.

In this ICP Expert ICP-OES Software “How to…..” webinar series, we pick a most-frequent-asked topic each week and give a brief demonstration and discussion on the subject.
Topics include, but are not limited to, Inter Element Correction (IEC) Factors, Advanced Valve System (AVS), and Fast Automated Curve-fitting Technique (FACT), to name a few. You don’t want to miss them! Come with all your questions for our immediate answers!
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>

Agilent Technologies: ICP Expert How To: What is it and How to set up an Advanced Valve System (AVS) for ICP-OES

What is it and How to set up an Advanced Valve System (AVS) for ICP-OES

Topics include, but are not limited to Advanced Valve System (AVS). You don’t want to miss them! Come with all your questions for our immediate answers!

What is it and How to set up an AVS for ICP-OES

IR spectroscopy is a ubiquitous analytical technique that was first used during World War II. Since that time it has undergone significant development, providing a means for the analysis of many types of samples both in the laboratory and in the field.
This session will focus on the theory of Infrared and will discuss some modern infrared analytical techniques.
<blockquote>
Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: A discussion on the Theory of FTIR

A discussion on the Theory of FTIR

This session will focus on the theory of Infrared and will discuss some modern infrared analytical techniques.

This series will go through the Fundamentals of Atomic Spectroscopy, with a focus on Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES).
<blockquote>
Presenter: Ana García González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>

Agilent Technologies: Fundamentals of Atomic Spectroscopy: ICP-OES

Fundamentals of Atomic Spectroscopy: ICP-OES

Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES).

This series will go through the Fundamentals of Atomic Spectrometry, with a focus on Inductively Coupled Plasma Mass Spectrometry (ICP-MS).
<blockquote>
Presenter: Yan Cheung, PhD (Application Scientist, Agilent Technologies, Inc.) Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: Fundamentals of Mass Spectrometry: ICP-MS

Fundamentals of Mass Spectrometry: ICP-MS

Inductively Coupled Plasma Mass Spectrometry (ICP-MS).

This is a three-week workshop series on environmental applications with Agilent ICPMS systems.
Week 1: we will start the workshop with basic theories of ICPMS, typical workflow of the most common EPA methods, as well as a discussion in sample preparations.
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>
<blockquote>
Presenter: Yan Cheung (PhDApplication Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: Getting excellent results without the complexity! Introduction to EPA 200.8, EPA 6020 methods workflow in ICP-MS

Getting excellent results without the complexity! Introduction to EPA 200.8, EPA 6020 methods workflow in ICP-MS

Environmental applications with Agilent ICPMS systems. Basic theories of ICPMS, typical workflow of the most common EPA methods.

EPA 200.8, EPA 6020 methods workflow in ICP-MS

While making a UV-Vis measurement is simple, making an accurate measurement requires an understanding of instrument parameters and their effects on the measurement. Parameters include Baseline correction, spectral bandwidth, data interval, and many additional settings.
This presentation will provide an insight into these parameters and more.
<blockquote>
Presenter: Mark Fisher, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark, an Application Scientist for Agilent Technologies, has over 35 years of experience in molecular spectroscopy. He has held roles in Agilent&#39;s UV-Vis-NIR, fluorescence, and atomic absorption product portfolios. In addition to identifying industry trends and new business needs, Mark&#39;s responsibilities include application development, pre and post-sales support, as well as acting as a customer advocate for new product and technology opportunities. Mark received his doctorate in analytical chemistry from the University of Nebraska-Lincoln.
</blockquote>
<blockquote>
Presenter: Scott Melis, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Scott Melis has a PHD in Physics from Georgetown University in Washington, DC and started with Agilent in 2021 as a Molecular Spectroscopy Application Scientist. In his graduate work, Scott studied nanoparticle formation and growth for a variety of applications. Projects that he worked with include developing processes to deposit and characterize semiconducting molecular nano-cocrystals for use in optoelectronic devices as well as controlling polymer nanoparticle size through rapid mixing conditions.
</blockquote>

Agilent Technologies: Understanding UV-Vis Instrumental Parameters

Understanding UV-Vis Instrumental Parameters

This presentation will provide an insight into baseline correction, spectral bandwidth, data interval, and many additional settings

ICPMS webinars focusing on Academy/Principles - page 6