This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

New Food magazine

Agilent Technologies

Shimadzu Corporation

This series will go through the Fundamentals of Atomic Spectrometry, with a focus on Inductively Coupled Plasma Mass Spectrometry (ICP-MS).
<blockquote>
Presenter: Yan Cheung, PhD (Application Scientist, Agilent Technologies, Inc.) Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: Fundamentals of Mass Spectrometry: ICP-MS

Fundamentals of Mass Spectrometry: ICP-MS

Inductively Coupled Plasma Mass Spectrometry (ICP-MS).

Learning Objectives for this Course:
<ul>
<li>Describe what Atomic Spectroscopy is and why it is important.
</li>
<li>Describe what Mass Spectrometry is and why it is important.
</li>
<li>Know all the various instruments that are used in Atomic Spectroscopy and the fundamental way how they work.
</li>
<li>Know all the various instruments that are used in Mass Spectrometry and the fundamental way how they work.
</li>
<li>Understand the industries that use these analytical techniques and how they use them.
</li>
<li>Know all the various instruments that are used in Mass Spectrometry and the fundamental way how they work.
</li>
</ul>
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>

Agilent Technologies: Fundamentals of Mass Spectrometry with the ICP-MS/MS

Fundamentals of Mass Spectrometry with the ICP-MS/MS

What are Atonomic Spectroscopy and Mass Spectroscopy and why are they important.

This is a three-week workshop series on environmental applications with Agilent ICPMS systems.
Week 1: we will start the workshop with basic theories of ICPMS, typical workflow of the most common EPA methods, as well as a discussion in sample preparations.
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>
<blockquote>
Presenter: Yan Cheung (PhDApplication Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: Getting excellent results without the complexity! Introduction to EPA 200.8, EPA 6020 methods workflow in ICP-MS

Getting excellent results without the complexity! Introduction to EPA 200.8, EPA 6020 methods workflow in ICP-MS

Environmental applications with Agilent ICPMS systems. Basic theories of ICPMS, typical workflow of the most common EPA methods.

EPA 200.8, EPA 6020 methods workflow in ICP-MS

This is a three-week workshop series on environmental applications with Agilent ICPMS systems.
Week 2: will be focused on Agilent ICPMS software and hardware demos. We will show you the ins and outs of the instrument, a typical environmental analysis work flow, as well as tips and tricks on preventative maintenances.
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>
<blockquote>
Presenter: Yan Cheung (PhDApplication Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Agilent Technologies: See it to believe it! Bring it All Together, an ICP-MS software and hardware live demo

See it to believe it! Bring it All Together, an ICP-MS software and hardware live demo

Environmental applications with Agilent ICPMS systems. Agilent ICPMS software and hardware demos.

Agilent ICPMS software and hardware demos

With the introduction of Agilent’s second generation ICP-QQQ instrument, the Agilent 8900 Triple Quadrupole ICP-MS, reaction cell operation with MS/MS mode has been further refined.
We will take a close look at the typically challenging elements of P, S and Si and show how ultrarace level analysis of these elements can easily be achieved.
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>

Agilent Technologies: Unearth the importance of Single Mass Resolution for MS/MS with Triple Quadrupole ICP-MS (ICP-QQQ)

Unearth the importance of Single Mass Resolution for MS/MS with Triple Quadrupole ICP-MS (ICP-QQQ)

Typically challenging elements of P, S and Si and show how ultrarace level analysis of these elements can easily be achieved.

Unearth the importance of Single Mass Resolution

Techniques and tools for improve wash out of “sticky” elements, such as B, Tl, and Hg, on an Agilent ICP-MS will be discussed. An understanding where the individual elements stick in the instrument aids in the chemistry and the sequence of rinse solutions used for their removal.
Use of the Pre-emptive rinse and Intelligent Rinse features within the MassHunter software greatly improve washout of these sticky elements. Features and setup of an Integrated Sample Introduction System (ISIS) also reduce carry over of these elements. Eliminating contamination increases the probability that accurate sample results can be obtained. Sources of common lab contaminants and methods used for their elimination will also be discussed. A semi-Cool plasma technique may be discussed to demonstrate how to calibrate and obtain somewhat lower levels of alkali metals in the presence of their interferences.
<blockquote>
Presenter: Jason Wintrode (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jason has been with Agilent since 2016 and worked as a Field Service Engineer until taking the role of an ICP-MS applications scientist in the fall of 2018. He has focused on ICP-MS for environmental, applications. Previous to Agilent He worked in an environmental lab performing analysis using ICPMS, ICP-OES, and Hg instrumentation for 15 years. Jason obtained a master’s of science degree in chemistry from Montana State University in Bozeman, MT.
</blockquote>

Agilent Technologies: Minimize Carry Over and Contamination on Your Agilent ICP-MS

Minimize Carry Over and Contamination on Your Agilent ICP-MS

Techniques and tools for improve wash out of “sticky” elements, such as B, Tl, and Hg, on an Agilent ICP-MS will be discussed.

Two years have passed since we hosted our first microplastics symposium.
Since then, the microplastic landscape has witnessed significant developments—the impending release of the first ISO standard and ongoing advancements in SOPs. We are pleased that we can bring you together with experts in our field.
This digital conference aims to explore various crucial topics related to the analysis of microplastics, covering areas such as sampling, sample preparation, analysis, and evaluation.
<h3>Highlights – Why you should attend</h3>
<h5>Stay updated on microplastic analysis</h5>
Gain insight into the latest advancements and challenges in microplastic analysis. This seminar covers essential aspects such as sampling, sample preparation, and analysis techniques like spectroscopy (ICP-MS) and chromatography (pyr/TED-GC/MS). 
<h5>Explore diverse applications</h5>
Discover the wide range of applications beyond microplastic analysis that can be addressed with a QCL-based IR imaging system like the LDIR 8700. Get an overview of its potential in areas such as materials, bio, and pharmaceuticals.
<h5>Take part in a live demo</h5>
Witness a live demonstration of an automatic microplastic analysis workflow. Experience firsthand how these techniques and technologies come together to address real-world challenges. Engage with Agilent experts who will answer any questions you may have.
<h5>Showcase your expertise</h5>
Actively participate by presenting your work and contributions in techniques like TED-GC/MS, pyr-GC/MS, and ICP-MS, which are crucial for microplastic analysis. Alternatively, highlight your knowledge of the versatile LDIR 8700 system, showcasing its applications in pharmaceuticals, material analysis, or bio sectors.
<h3>Agenda</h3>
<h5>09:00 Welcome Introduction &amp; Video of Geoff Winkett , Agilent Technologies</h5>
<h5>9:10 The World of Microplastics Up to Date an Overview</h5>
<ul>
<li>Andreas Kerstan (Agilent Technologies)</li>
</ul>
<h5>09:30 Hot news on Agilent LDIR, new developments, and future perspective</h5>
<ul>
<li>Wesam Alwan , Darren Robey (Agilent Technologies)</li>
</ul>
<h5>09:50 Release of Plastic Additives and Microplastic Particles from Different Consumer Products into Water under Accelerated UV Weathering Conditions</h5>
<ul>
<li>Lars Hildebrandt (Scientist, Helmholtz Zentrum Hereon)</li>
</ul>
Photodegradation of plastic products is known to accelerate weathering and the resulting release of chemical additives and particles to the environment, however these processes are complex. Here, eight different plastic consumer products were leached in double distilled water under exposure to strong ultraviolet (UV) light for ten days, and the chemical composition of the leachates was compared to their respective dark controls. The leachates and plastic particles were investigated with a wide battery of chemical analytical tools to broadly characterize the underlying processes and possible hazards. These covered (a) metal(loid) analysis, (b) microplastic analysis, (c) analysis of &gt;70 organic target analytes and (d) nontargeted screening of the extracts.
<h5>10:10 Identification of Polymers Using Machine Learning</h5>
<ul>
<li>Xin Tian (Scientific Researcher, KWR NL)</li>
</ul>
Microplastics and other polymers are found in the environment. For this reason, it is important to have reliable methods to identify them. Methods used to detect nano- and microplastics in the environment include Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, laser-directed infrared (LDIR) spectroscopy and thermogravimetric analysis (TGA)/pyrolysis. These measurement techniques can provide a lot of information, but sometimes require a database with a lot of high-quality data to compare measurement results. Machine learning (especially classification models) can help improve data processing and accuracy.
Recent research has looked at how machine learning can help improve the accuracy of identification with infrared spectroscopy. Different computer models were tested and examined to see if the accuracy increases and if it does not require an unreasonable amount of computing power and time. This research focused on finding an effective method for identifying polymers in the environment based on their mid-infrared spectroscopic signals.
Polymers are identified by infrared spectroscopy by comparing their spectra with spectra in a database/library. This works well for new polymers, which are clean and barely degraded. Since polymers from the environment are actually degraded, comparing their infrared spectra with spectra in the library is difficult. This is because the spectra in the library often have large deviations from the spectra of the measured polymers. Increasing the number of spectra in the library is not possible because the number of spectra of environmentally degraded polymers is almost infinite. The study therefore looked at whether the problem of small data sets can be addressed using machine learning. The research presents a data enrichment technique to generate spectra of degraded polymers from single spectra of a limited number of samples. Four models were tested using these spectra to identify polymers. The study shows that all the models achieve high success rates, thereby facilitating the identification of polymers from environmental samples. Moreover, the research shows that it is not necessarily the most advanced computer model (particularly deep neural network models) that yields the best results.
<h5>10:30 From the River to the Sea: Microplastics in Sediments of the Thames River</h5>
<ul>
<li>Friederike Strock (Postdoc, German Federal Institute of Hydrology)</li>
</ul>
Microplastics have been investigated for over 45 years especially in the marine environment, but only in the past years research has started to focus on freshwater environments. In the frame of the H2020 LABPLAS project, sediments along the course of the Thames river in its freshwater and estuarune part were studied in order to better understand the sources, transport, distribution and impacts of plastic pollution and to detect the amount of plastics transport via the rivers into the sea.
In the frame of the project, a winter and a summer campaign were conducted 2022 and samples taken from 6 sites within the study area. Sediment samples were taken with a Van Veen grabber from the edge of the river, wet sieved into different compartments (10 100 µm, 100 1000 µm, &gt;1000 µm), density separated and the organic matter digested. The plastics from the sediments were characterized with a Laser Direct Infrared (LDIR). The preliminary results reveal that microplastics are present in all samples. The amount of particles varies significantly between the sampling sites showing the importance of industrial emissions and cities.
<h5>10:50 Good Laboratory Practices to Characterize Microplastics Using Quantum-Cascade Laser Reflectance Absorbance Spectrometry</h5>
<ul>
<li>Jose Manuel Andrade Garda (Professor Analytical Chemistry, University of A Corunna)</li>
</ul>
The nowadays broad societal interest in microplastic pollution demands urgent responses and actions. For these be possible politicians must set rules which, in turn, are not possible at all without sound scientific data. Unfortunately, there is a general feeling that the experimental results obtained so far are not still fully comparable and, further, that the monitoring field where hundreds or samples are taken is not being fully considered. Scientific studies and future regulations depend critically on a reliable identification of the polymers (if any) that constitute the suspicious particles under study. Out of the various analytical techniques to characterize them a novel one based on reflectance-absorbance spectrometry, commercialized as LDIR, outstands. It uses a tuneablemid-IR quantum cascade laser (QCL) to imaging a reflective microscopy slide or a metal-coated filter in a remarkable small timeframe. This communication is meant to present best practice guides to overcome some obstacles/difficulties in routine measurements, and open a path for field monitoring; among them: the adequacy of the spectral range, the variation of the peak&#39;s intensities with the size of the particles; the speed of the analysis as a function of the instrumental setup; the criterion to identify unknown spectra (a tiered approach is finally suggested); and how to differentiate fibers and fragments semiautomatically. Also, an empirical dependence of the depth of penetration of the QCL laser in common plastic particles is approached first time.
<h5>11:10 Chemical Characterization of Microplastics using Pyrolysis-Gas Chromatography-Mass Spectrometry (Py-GC-MS)</h5>
<ul>
<li>Soledad Muniategui-Lorenzo (Pull Professor of Analytical Chemistry, University of A Corunna)</li>
</ul>
The implementation of monitoring programs for Microplastics requires reliable and standardisedmethods. Fourier Transform Infrared (FTIR) and Raman spectroscopy techniques are the most commonly used for Microplastics analysis. However, thermal analytical techniques are currently gaining popularity. This presentation focuses on the potential of mass-based thermal analytical techniques, in particular, Pyrolysis coupled with Gas Chromatography-Mass Spectrometry (Py-GC-MS), for the accurate qualitative and quantitative analysis of microplastics in environmental matrices. It outlines some advantages and good laboratory practices of this approach, the importance of method normalisation, and how it can provide detailed information on polymers and plastic additives.
<h5>11:20 Analysis of Fibrous Microplastics Using Laser Direct Infrared Imaging</h5>
<ul>
<li>Monique Greiner (Research Associate, Hohenstein Laboratories)</li>
</ul>
In the research field of microplastics the identification of their source is important in order to develop strategies to minimize the pollution. A major percentage of microplastics originates from textiles. One pathway into the environment are washing procedures because the textiles release fibers during the process. Therefore our aim was to find a fast and easy way to identify fibers. In our presentation we want to give insights in our approach to the analysis of fibrous microplastics with the LDIR 8700. We will talk about our strategies, the results we achieved and difficulties we faced.
<h5>11:40 Looking beyond the Polymer: Using Thermal Desorption GC MS to expand our understanding of Microplastics</h5>
<ul>
<li>Jan Peter Mayser (Market Specialist, Markes International)</li>
</ul>
Detecting and analysingmicroplastics in the environment is challenging. The method must be able to detect and distinguish between a large variety of polymers. Additives, such as hardeners, flame retardants and preservatives, used during the manufacturing process and other compounds, that can adhere to the surfaces of microplastics from their environment, can affect their toxicity assessment. These additives could be used to link the microplastics found in the environment to their original use or potentially even back to the manufacturer.
In this study, various salts were sampled and filtered and analyzed for their microplastic content. TD–GC–MS was used to identify and measure which concentration of the plastic PS, PET, PVC and Nylon 6 had been incorporated into the crystalline structure of the salt during evaporation. By using direct desorption and backflushing technology, a large sample size could be easily isolated from the lab environment during analysis while ensuring a large range of volatile organic compounds (VOCs) including the marker compounds for four polymers could be trapped and analyzed.
The VOC-profile of the microplastics not only gave information about the polymer and its concentration within the sample, but further information about the toxicity could be extracted. This enabled the determination and tentative identification of additional compounds in the samples, such as dimethyl ether, acrolein and cyclopentane. These are used in the process of manufacturing plastics, so could assist with identifying the source of the plastics. For the four analysed polymers distinct marker compounds could be identified and calibration curves determined for each polymer. In all of the real-world salt samples microplastics were identified, highlighting the ubiquitous nature of the microplastic contamination.
This further information about the origin of the polymer, as well as the origin of the microplastic particles can be gathered by investigating the full VOC-profile obtained by TD-GC-MS. This allows both additional polymer information and particle source characterization.
<h5>12:00 Tiny Problems</h5>
<ul>
<li>Roxana Sühring (Assistant Professor in Analytical Environmental Chemistry, Toronto Metropolitan University)</li>
</ul>
Microplastics have been on the front page of newspapers, a dominant topic for environmental research (and funding), and a recent focus for regulatory action across the globe. Their potential impacts have been classed as a planetary boundary threat and new studies are published daily, reporting microplastics virtually anywhere on the planet. But despite numerous publications, there are still a lot of open questions on how to effectively and reproducibly characterize microplastics. How can microplastic characterization be automized? What is the impact of additives or weathering on the characterization accuracy?
In this presentation I will provide an overview and the first results of a research collaboration between Agilent technologies and the Emerging contaminants lab at Toronto Metropolitan University that works on addressing some of these questions. Our research aims to create a versatile microplastic library using weathered and new plastics commonly found in the environment. This library will additionally be used as a training set for developing automated particle characterization for the LDIR.
<h5>12:20 Identification of Microplastic Particles in Soil Using LDIR</h5>
<ul>
<li>Martine Graf, PhD (Student &amp; Senior Technician, Bangor University)</li>
</ul>
The use of agricultural plastic has become increasingly concerning in an environmental setting in recent years; in Europe alone, an estimated 2.5 million tones of plastic mulch films are used each year. The use of mulch films for crop production has been promoted by governments worldwide due to its many benefits, however the removal of these films from the soil can be difficult due to their poor mechanical strength and fragmentation, and barriers such as poor incentives for farmers and underdeveloped infrastructure for collection and disposal. The latter often leading to the films being discarded or incinerated along field margins, or ploughed back into the fields, leading to an accumulation of plastic legacy in soil. To evaluate the microplastic pollution levels in agricultural soils, we are i ) conducting a global soil survey in all partner countries; ii) assessing the degradation and fragmentation of conventional and biodegradable plastic mulch films in soil, and measuring the resulting microplastic production rate; and iii) measure the degradation and movement of microplastic in soil after repeated application. Microplastics are extracted from soil using targeted methods for different polymer types, and analysed using fluorescent microscopy, FTIR spectroscopy, and LDIR spectroscopy.
<h5>12:40 Wrap up and open discussion</h5>

Agilent Technologies: Agilent Microplastics Virtual Symposium 2023

Agilent Microplastics Virtual Symposium 2023

Explore various crucial topics related to the analysis of microplastics, covering areas such as sampling, sample preparation, analysis, and evaluation.

Introducing Shimadzu’s Multimodal Imaging System, designed to provide advanced clinical imaging and accelerate research breakthroughs. The powerful system consists of two instruments: the Laser-ablation ICP-MS, which acquires information on the element distribution, and the award-winning iMScope QT MALDI-MS Microscope, which provide information on the compound distribution. The data from both instruments can be seamlessly analyzed using the intuitive IMAGEREVEAL MS software without the need for special data conversion. This integrated data analysis unlocks unparalleled insights into the spatial distribution of elements and biomolecules within tissues and cells, thereby opening up new avenues for diagnostics, biomarker discovery, and drug development.
Join us at our Shimadzu Digital Classrooms as we delve into the world of Multimodal Imaging by exploring real-world application case studies. Experience firsthand how this cutting-edge technology, together with integrated data analysis, provides profound insights quickly and accurately to advance clinical research.
Don&#39;t miss this opportunity to discover the capabilities of Shimadzu&#39;s multimodal imaging system - Register now!
<h3>Learning Objectives:</h3>
<ul>
<li>Discover capabilities of Shimadzu&#39;s Multimodal Imaging System, integrating LA-ICPMS and MALDI-MS Microscopy</li>
<li>Gain comprehensive insights into Shimadzu&#39;s complete solution for LA-ICP-MS</li>
<li>Learn about Shimadzu iMScope QT, a Next-Generation Mass Spectrometry Imaging system</li>
<li>Explore real-world clinical application case studies leveraging the Multimodal Imaging approach</li>
</ul>
<blockquote>
Presenter: Pravin Konde, PhD (Senior Product Specialist, Shimadzu (Asia Pacific) Pte Ltd)
</blockquote>
<blockquote>
Pravin Konde is a Senior Product Specialist (for Spectroscopy &amp; TOC) at Shimadzu Asia Pacific Singapore. He has about 15 years of industry experience of which about 12 years in analytical instruments with expertise in trace element analysis and spectroscopy applications. He is engaged primarily in technical support to regional sales teams and customers. Prior to joining industry, he has done his PhD in Chemistry from Institute of Chemical Technology (formerly UDCT), Mumbai, India.
</blockquote>
<blockquote>
Presenter: Naatasha Isahak, PhD (Product Specialist (Life Sciences), Shimadzu (Asia Pacific) Pte Ltd)
</blockquote>
<blockquote>
Naatasha Isahak is a Product Specialist for MALDI and Life Sciences Products from Shimadzu Asia Pacific Pte Ltd. She has received her PhD from the University of Sydney (Chemistry) working on surface initiated polymerisation on silica nanoparticles using RAFT polymerisation and bioorthogonal conjugation of peptides using Native Chemical Ligation. She then spent 5 years working on developing platforms for stem cells and organoids characterization that included working with microfluidic devices and helical polymers. Naatasha joined Shimadzu in 2022 to expand her experiences to MALDI characterization on materials and biological samples.
</blockquote>

Shimadzu: Powerful Multimodal Clinical Imaging System with LA-ICP-MS and MALDI-MS Microscopy

Powerful Multimodal Clinical Imaging System with LA-ICP-MS and MALDI-MS Microscopy

LA-ICP-MS, which acquires information on the element distribution & iMScope QT MALDI-MS Microscope, which provide information on the compound distribution.

Clinical Imaging with LA-ICP-MS and MALDI-MS Microscopy

Join us for a webinar that delves into the crucial aspects of plant-based foods – their nutritional composition, safety, and the innovative technology that enables accurate analysis. As the demand for plant-based foods continues to surge, ensuring their nutritional excellence and safety is paramount.
In this webinar, we will explore the world of plant-based foods and the challenges associated with their analysis of nutritional content for safety. From addressing rising concerns about animal cruelty to promoting environmental sustainability and enhanced health benefits, the momentum behind plant-based diets is undeniable. However, with these benefits come responsibilities to accurately assess nutritional and toxic elements to meet regulatory standards.
Our expert panel will guide you through the application of ICP-MS for plant-based foods. Uncover the NexION 2200 ICP-MS system, a cutting-edge technology designed to analyse a wide range of elemental concentrations, from parts per million (ppm) to parts per trillion (ppt) levels.
<ul>
<li>Understand the challenges surrounding accurate nutritional labelling and safety assessment in the plant-based food industry.
</li>
<li>Discover how ICP-MS plays a pivotal role in monitoring nutritional and toxic elements in plant-based raw materials and finished products.
</li>
<li>Learn about the latest advancements in elemental analysis technology and its applications in ensuring compliance with quality control criteria and regulatory standards.
</li>
</ul>
Uncover the benefits of the NexION 2200, the latest ICP-MS analysis technology on the market
<blockquote>
Presenter: Liyan Xing (Senior Application Scientist, PerkinElmer)
</blockquote>
<blockquote>
Dr. Liyan Xing is a Senior Application Scientist for ICP-MS at PerkinElmer with experience in elemental and isotope analysis using ICP-MS/MC-ICP-MS and/or hyphenated technologies, such as HPLC, GC, and laser ablation. She holds a PhD in Analytical Chemistry and an MSc in Organic Chemistry specializing in the synthesis and characterisation of supramolecules. She has done post-doc research on the catalytic mechanisms in hydrogen fuel cells. Liyan is a national committee member of CSASS and the editor of the Newsletter since 2019. She has published research on speciation analysis using HPLC-ICP-MS, isotope analysis using MC-ICP-MS/LA-ICP-MS, the oxide formation mechanisms in ICP-MS, Pt catalytic mechanisms in hydrogen fuel cells, and template synthesis of supramolecules and helices.
</blockquote>
<blockquote>
Presenter: Aaron Hineman (Inorganic Product Line Leader, PerkinElmer)
</blockquote>
<blockquote>
Aaron Hineman is currently the Inorganic Product Line Leader for the Americas. Prior to this position, he was a Senior Field Application Scientist with PerkinElmer. Aaron has a strong background in inorganic analytical chemistry including demonstrated hands-on expertise in state-of-the-art ICP-MS and ICP-OES instrumentation, hyphenated speciation using chromatography coupled to ICP-MS, working in 21 CFR Part 11 compliant laboratories for elemental impurity analysis, and various microwave, acid and fusion sample preparation techniques. Prior to joining PerkinElmer, he spent 10 years in environmental and geochemical laboratories developing analytical methodology and laboratory systems. His interests outside of work include snowboarding/skiing, obstacle races, biking, and running.
</blockquote>

New Food: Plant-Based Food Revolution: leveraging ICP-MS for quality assurance and nutritional insights

Plant-Based Food Revolution: leveraging ICP-MS for quality assurance and nutritional insights

The world of plant-based foods and the challenges associated with their analysis of nutritional content for safety.

Plant-Based Food Revolution: leveraging ICP-MS

This is a three-week workshop series on environmental applications with Agilent ICPMS systems.
Week 3: we will deep dive in some advanced, uncommon, and unique applications, and show you additional tips and tricks on obtaining excellent analytical results in difficult matrices.
<blockquote>
Presenter: L. Craig Jones (ICP-MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Craig has been with Agilent for over 15 years as an ICP-MS applications scientist. He has been involved with multiple type of applications for ICP-MS, including environmental, pharmaceutical, semiconductor, geologic, and clinical analyses, to name a few. Previous to Agilent he worked in an environmental lab performing analysis and supervising both the inorganic and organic sections of the laboratory. In his spare time, Craig enjoys volunteering at the local marine science center, mountain biking, hiking, and relaxing at the beach. Craig obtained a Bachelor of Science degree in chemistry from Fort Lewis College in Durango, CO.
</blockquote>
<blockquote>
Presenter: Yan Cheung (PhDApplication Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Yan received her Ph.D. in Analytical Chemistry from Indiana University Bloomington. She joined Agilent Technologies as an Application Scientist in the Life Science and Chemical Analysis team in April 2020. Yan has extensive experience in operating and method development in ICP-MS. Yan also has years of experience working in the oil and gas industry.
</blockquote>

Let’s take a deep dive! Advanced environmental ICP-MS applications and tips and tricks on getting excellent analytical results.

Environmental applications with Agilent ICPMS systems. We will deep dive in some advanced, uncommon, and unique applications.

ICPMS webinars focusing on ICP/MS - page 14