<h4>The problem&nbsp;</h4>We live in a “global village” but we are all different and we use many different languages to communicate.&nbsp;Even when people speak the same language, the same words may be used with different meanings. See, for example, some different uses of the word “standard” in English – a normative document, a solution of known concentration or even a type of flag.&nbsp;Even in the same area of activity misunderstandings do occur which may result in a waste of time and money, or even worse consequences.&nbsp;When talking about laboratory tests, lack of a full understanding of key terms and inappropriate translations leaves room for different interpretations of stated requirements. For example, there have historically been a number of different but related uses of the term ‘detection limit’. This may lead to inadequate fulfilment of those requirements, thus becoming an obstacle to the production of analytical data that is fit for its intended use. A shared interpretation of concepts related to quality in measurement between laboratories and accreditation bodies is also crucial for a fair and harmonised approach to laboratory assessment across the world.&nbsp;<h4>A common language&nbsp;</h4>We need a common language; clear and unambiguous. We need a common vocabulary to provide consistent definitions of concepts with their associated terms. To this end, several organisations participate in a joint effort to develop and maintain an international vocabulary of metrology (VIM) [1], which aims to achieve a unique understanding of concepts related to measurements across all sectors. The VIM is a normative reference in the standards ISO/IEC 17025, ISO 15189 and ISO/IEC 17043, and is therefore a key document for all organisations seeking accreditation.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_You_talk_we_understand_The_way_out_of_the_tower_of_Babel_Standards_8d947dbd5f.jpg" alt="Eurachem: You talk, we understand – The way out of the tower of Babel_A common language" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_You_talk_we_understand_The_way_out_of_the_tower_of_Babel_Standards_8d947dbd5f.jpg 245w," sizes="100vw" width="1126" height="499"><h4>Is this enough?&nbsp;</h4>For laboratory staff some problems still stand and need to be addressed:&nbsp;<ul><li>Many people are confused about both concepts and terms.&nbsp;</li><li>It may be difficult to understand the “formal” VIM definitions – they are short statements intended to apply to many different measurement sectors.</li><li>Translations into local languages may add to the confusion, e.g. if different terms are used in different sectors for the same VIM concept and the translator overlooks this issue.</li><li>Some substantial changes to terminology have been made in an attempt to accommodate chemical and biological measurements. Some “old” concepts still stand but have new names, e.g. “within laboratory reproducibility” vs. “intermediate precision”.&nbsp;</li></ul>To address these issues Eurachem has produced a guide [2] which provides an accessible reference containing simple and in context explanations of terms most relevant to analysts, with additional examples relating those concepts to chemical and biological measurements.&nbsp;<h4>Do you understand the meaning of these terms?&nbsp;</h4>Are you interested in a quantity or a quality? Depending on the answer, will you use a measurement procedure or an examination? Is method verification the same or less demanding than method validation? Do you need a calibration or just performance verification? Do you have a measurement standard in your laboratory? Is metrological traceability something you worry about? These are examples of the terms supporting the reliability of any measurement result that need to be clearly understood.&nbsp;<h5>Example – Accuracy, trueness, precision: are they synonyms?&nbsp;</h5><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_You_talk_we_understand_The_way_out_of_the_tower_of_Babel_accuracy_231e1e005e.jpg" alt="Eurachem: You talk, we understand – The way out of the tower of Babel_Example – Accuracy, trueness, precision" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_You_talk_we_understand_The_way_out_of_the_tower_of_Babel_accuracy_231e1e005e.jpg 146w," sizes="100vw" width="754" height="807"><ul><li>Closeness between measurement results (relating to the concept of precision)</li><li>Closeness of the average of the measurement results to a reference value (relating to the concept of trueness)&nbsp;</li><li>Closeness of an individual measurement result to the true value (relating to the concept of accuracy)&nbsp;</li></ul>The different situations in the figure show the effect of:&nbsp;<ol style="list-style-type:lower-latin;"><li>poor precision and trueness (imprecise and biased)&nbsp;</li><li>good precision, poor trueness (precise but biased)&nbsp;</li><li>poor precision, good trueness (imprecise but unbiased)&nbsp;</li><li>good precision and trueness (precise and unbiased)&nbsp;</li></ol>Improving both precision and trueness is expected to improve accuracy.&nbsp;<h4>Is all this relevant to you?&nbsp;</h4>Do you work in a laboratory, either as an analyst, quality manager or director? Are you involved in other activities related to analytical work, such as providing proficiency tests, producing reference materials or accrediting any such activity? Do you teach or study subjects related to measurements? Do you use measurement results or prescribe how to use them? If the answer is yes to any of these questions, the following reference documents are also for you.

You talk, we understand – The way out of the tower of Babel

Visit the LabRulez booth at <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/events/871">analytica 2026</a> in Munich, 24. - 27. March 2026! You can find us in Hall A1, Booth A1.506. At the booth, you will be able to explore live demonstrations of how the LabRulez portals work and see selected analytical instruments from our pre-owned marketplace section.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Lab_Rulez_at_Analytica_2026_Floor_plan_55e1057e03.jpg" alt="LabRulez at Analytica 2026: Hall A1 Floor Plan and Booth Location" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Lab_Rulez_at_Analytica_2026_Floor_plan_55e1057e03.jpg 245w," sizes="100vw" width="1516" height="881"><h3>Would you like to learn how the LabRulez portals work?</h3>➡︎ <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/">LabRulezLCMS</a> ➡︎ <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/">LabRulezGCMS</a> ➡︎ <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/">LabRulezICPMS</a><ul><li>A unique online solution for your marketing</li><li>A targeted audience from the analytical chemistry community</li><li>Modern technologies and a unique concept</li><li>Design optimized for most smart devices – PC, mobile, and tablet</li><li>Advanced statistical tools fully available to users</li></ul><h3>Services Offered</h3><h4>News + Company Updates</h4><ul><li>Publish news related to your instrumentation, applications, services, events, job openings, and more</li><li>News is shared both on our portals and across our social media channels</li></ul><h4>Library – All Documents in One Place</h4><ul><li>Applications, posters, presentations, technical articles, brochures, specifications</li><li>Fast and advanced search capabilities</li><li>Over 32,000 documents currently available in our database</li></ul><h4>Webinars</h4><ul><li>Upcoming and on-demand webinars from the field of analytical chemistry</li><li>More than 5,500 webinars covering chromatography, mass spectrometry, and spectroscopy</li></ul><h4>Careers</h4><ul><li>Targeted job listings in analytical chemistry</li><li>Clear filtering by specialization or location</li><li>Increased visibility for job postings</li></ul><h4>Companies</h4><ul><li>Company profile with key information and contacts</li><li>Integration of all your activities on our portal: News, Library documents, Webinars, Upcoming Events, Careers, and mentions by partners or customers</li><li>Connection to your Products listed on LabRulez portals</li></ul><h4>Products and Services</h4><ul><li>Comprehensive overview of instrumental techniques and services</li><li>Targeting the analytical chemistry community and customers in the growing online environment</li></ul><h4>Marketplace</h4><ul><li>Buying and selling pre-owned analytical equipment</li><li>We purchase analytical instrumentation of all brands and ages</li><li>Sell your equipment through LabRulez</li><li>Request and purchase complete systems, modules, or spare parts with warranty and service</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Lab_Rulez_at_analytica_2026_bazar_7edf4a0872.jpg" alt="LabRulez at analytica 2026" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Lab_Rulez_at_analytica_2026_bazar_7edf4a0872.jpg 88w," sizes="100vw" width="1600" height="2844"><h3>What Will Be on Display at Our Booth?</h3>Come and explore selected spare parts and modules from our marketplace section. These include both new, tested, and pre-owned items.<h4><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/bazaar">LabRulezLCMS Marketplace</a></h4>Spare parts for LC/MS:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/bazaar?category=378">Vacuum turbo pumps for LC/MS</a></li></ul>Spare parts for HPLC:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/bazaar?category=397">Degassers for HPLC/UHPLC</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/bazaar?category=368&amp;search=valve">Automatic valves for HPLC</a></li><li>HPLC components for Agilent 1100, 1200, and 1260 Infinity II series</li></ul>Consumables:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/bazaar?category=377">HPLC lamps</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/bazaar?category=48">HPLC columns</a></li></ul><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/bazaar">LabRulezGCMS Marketplace</a></h4>Spare parts for GC/MS:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/bazaar?category=367&amp;search=turbo">Turbo pumps for GC/MS</a></li></ul>Spare parts for GC:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/bazaar?category=366&amp;search=EPC">EPC modules</a></li></ul>Sample injection<ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/bazaar/432">Autosampler 7693A for GC</a></li></ul>Consumables:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/bazaar?category=7">GC columns </a>and selected accessories</li></ul>

LabRulez at analytica 2026

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 23rd March 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by LECO, Shimadzu and Waters Corporation and brochure by Thermo Fisher Scientific!<h3>1. LECO: Determination of Nitrogen in Fertilizer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/CN_FP_928_NITROGEN_FERTILIZERS_203_821_615_4d4b013a08.pdf">Full PDF for download</a></li></ul>Nitrogen is one of the most important elements for plant development and is the macronutrient that is most often found to be deficient in arable soils used for crop production. Nitrogen plays a key role in the formation of enzymes and proteins, which promotes lush, vigorous growth and development in plants that often leads to an increase in the yield from the plant. Fertilizers are utilized to re-introduce nitrogen back into arable soils. Fertilizers can be grouped by their makeup and/or origins into categories including inorganic and/or synthetic (including nitrates, ammonium, and urea) and organic (including compost materials and manures). The accurate and precise determination of nitrogen in all fertilizer types is not only important in the process of blending and preparing the fertilizer material for use, but also will have significant impact on the commercial value and guarantee of the fertilizer.&nbsp;The CN928/FP928 is a macro combustion carbon and nitrogen/protein determinator that utilizes a pure oxygen environment in a high-temperature horizontal ceramic combustion furnace designed to handle macro sample mass. A thermoelectric cooler removes moisture from the combustion gases before they are collected in a ballast. The gases equilibrate and mix in the ballast before a representative aliquot (3 cm3 or 10 cm3 volume) of the gas is extracted and introduced into a flowing stream of inert gas (helium or argon) for analysis. The aliquot gas is carried to a thermal conductivity cell (TC) for the detection of nitrogen (N2).<h4>Instrument Model and Configuration&nbsp;</h4>Thermal conductivity detectors work by detecting changes in the thermal conductivity of the analyte gas compared to the constant thermal conductivity of the reference/carrier gas. The greater the difference between the thermal conductivity of the carrier gas and the analyte gas, the greater the sensitivity of the detector. The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=24&amp;search=CN928">CN928</a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=24&amp;search=FP928">FP928</a> supports either the use of helium or argon as the instrument's carrier gas. When used as a carrier gas, helium provides the highest sensitivity, and the best performance at the lower limit of the nitrogen range. The thermal conductivity difference between argon and nitrogen is not as great as the thermal conductivity difference between helium and nitrogen, therefore the detector is inherently less sensitive when using argon as a carrier gas.<h4>TYPICAL RESULTS&nbsp;</h4>Data was generated utilizing a single standard, forced through origin calibration using ~ 0.1 g of NIST 913b Uric Acid (33.23% N). Alternatively, LECO 503-530 LCRM Urea may be used for calibration.<h3>2. Shimadzu: Evaluation of Microscopic Foreign Matter in Recycled Plastics Using Dynamic Image Analysis, Infrared Microscopy, and SEM-EDS</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00861_en_7485baba21.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>&nbsp;It is easy to evaluate the size and quantity of microscopic foreign particles, which are key quality criteria of recycled plastics.</li><li>With the microcell method of DIA, microscopic foreign matter can be detected and counted quickly using a small sample quantity.</li><li>Infrared microscope and SEM-EDS systems provide information about the morphology and composition of microscopic foreign matter that is useful for improving recycling processes.</li></ul>One of the quality criteria for recycled plastic flakes and pellets is the content of foreign matter. Quantitatively evaluating the size and quantity of foreign particles contained in flakes and pellets is important for examining foreign matter removal processes intended to improve pellet quality and optimize manufacturing processesfor products made with recycled materials.&nbsp;In this article, pellets of virgin and recycled polyethylene terephthalate (hereafter PET) were dissolved in hexafluoro-2-propanol (hereafter HFIP), a solvent for dissolving PET, to prepare suspensions of insoluble microscopic foreign particles. These suspensions were measured with a dynamic particle image analysis (DIA) system (<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=iSpect+DIA-10">iSpect DIA-10</a>) to evaluate the size and number of insoluble microscopic foreign particles (patent pending). In addition, part of the suspensions were diluted tenfold and filtered through a membrane filter to collect the insoluble microscopic foreign particles on the filter. The morphology and composition of the collected microscopic foreign particles were evaluated using a digital microscope, an infrared microscope system (<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=IRTracer-100">IRTracer-100</a> and <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=AIM-9000">AIM-9000</a>), and an SEM-EDS system. These evaluations enabled comparison of the sizes, quantities, and types of foreign particles contained in virgin and recycled materials.<h4>Conclusion&nbsp;</h4>By using an iSpect DIA-10 system to measure suspensions prepared by dissolving two types of PET pellets (virgin and recycled) in HFIP, we obtained particle images of insoluble foreign matter and evaluated size and concentration of particles. That enabled quantitative comparison of particle size and count in microscopic foreign matter contained in virgin and recycled materials.&nbsp;In addition, after diluting the pellet suspensions, the insoluble microscopic foreign matter in the diluted suspensions was collected on filters. The morphology and composition of the microscopic foreign matter were evaluated using an infrared microscope and SEM-EDS system. The results indicated that the suspensions contained organic substances, such as cellulose and amide-based compounds, and inorganic substances and metals that contain elements such as C, O, Ca, and Al (suggestive of carbonates and metallic aluminum).&nbsp;Thus, the iSpect DIA-10 enables simple quantitative evaluation of the size and number of microscopic foreign particles in PET pellets using only small sample quantities. Furthermore, composition evaluation by infrared microscope and SEM-EDS systems provides useful information for investigating the origin of foreign matter, examining measures to reduce foreign matter, and evaluating impacts on final products. If similarities in size and shape are observed, particle images obtained with iSpect DIA-10 can also potentially be used to estimate particle composition.<h3>3. Thermo Fisher Scientific: Ensuring safer and effective pharmaceutical formulations by X-ray diffraction</h3><ul><li>Brochures and specifications</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/PF_41381_xrd_solutions_pharma_9b89684165.pdf">Full PDF for download</a></li></ul>From drug discovery and preformulation studies to the efficient scaling up in the manufacturing process in the plant and finally through QA/QC validation, X-ray diffraction (XRD) is a vital analysis method in the characterization of different physico-chemical properties of the active pharmaceutical ingredient (API). XRD is a gold standard method and required technique in the determination of polymorphic and salt screening, % of crystallinity and stability/reactivity studies of the final API.&nbsp;<h5><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2297">Thermo Scientific™ SolstiX™ XRD Software</a> with Security Suite extends ARL EQUINOX 100 X-ray Diffractometers to 21 CFR Part 11 regulated labs&nbsp;</h5><ul><li>Protect stored electronic data related to quality assurance within manufacturer’s computer systems&nbsp;</li><li>Put controls in place to keep records authentic, incorruptible, and confidential&nbsp;</li><li>Electronic signatures for the user to take responsibility for the electronic data in the system&nbsp;</li><li>Requirements in the data record: date and time of scan, name of the unique signer, and technological controls to ensure security (e.g. passwords)&nbsp;</li></ul><h5><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2143">Thermo Scientific™ ARL™ EQUINOX 100 X-ray benchtop diffractometer</a> is designed to exceed your analytical needs&nbsp;</h5><ul><li>Ideally suited for rapid screening of various formulations, finger printing or detection of counterfeit products&nbsp;</li><li>Polymorphism and crystallinity determination, crystallite size calculation, quantitative phase analysis, reactivity and stability of materials, etc.&nbsp;</li><li>XRD experiments on standard powders, bulks, tablets, small quantities, etc.&nbsp;</li><li>Real-time full pattern XRD based on our unique PSD detector technology&nbsp;</li><li>X-ray source based on micro-source technology with no external water cooling</li><li>Unique dual-mode capability: reflection and/or transmission&nbsp;</li></ul><h5>Thermo Scientific™ ARL™ EQUINOX 100 XRD for structural analysis&nbsp;</h5><ul><li>Easy-to-use simultaneous full pattern XRD based on unique real time PSD detector technology&nbsp;</li><li>Unique dual-mode capability on a benchtop XRD instrument: reflection and/or transmission mode&nbsp;</li><li>XRD experiments on various samples with sample spinner, capillary stage, sample changer or in controlled environment</li></ul><h5>Top XRD benefits for pharma&nbsp;</h5><ul><li>Structural characterization technique&nbsp;</li><li>Nondestructive technique&nbsp;</li><li>Small amount of sample needed for analysis&nbsp;</li><li>Unique diffraction patterns and quick response&nbsp;</li><li>Analysis on mixtures as well as amorphous content&nbsp;</li><li>Easy determination of induced structural changes</li></ul><h3>4. Waters Corporation: SIMI: A Different Approach to Revealing Dangerous Subvisible Impurities</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009094_en_fb955e89ec.pdf">Full PDF for download</a></li></ul>Foreign particulate matter, also known as extrinsic particles, has become a serious threat to patient safety in recent years, with cases linked to severe immunogenic reactions, deaths, and costly recalls.1 In 2021 alone, Takeda recalled 1.6 million doses of the Moderna COVID-19 mRNA vaccine in Japan after several patient deaths were linked to steel particulates shed from a malfunctioning pump.2 Over the span of seven years, from 2014–2017, there were more than 110 drug recalls as a result of glass delamination,3–4 and several more due to remnant crystals,5 owing to the difficulty of identifying the presence and source of foreign particulate matter. To prevent against such threats, manufacturers require high throughput technologies to better identify foreign particulate matter in real time.<h4>Results and Discussion</h4><h5>Shining a Light on Extrinsic Particles with SIMI</h5>Side illumination membrane imaging (SIMI) is a proprietary illumination, imaging, and analysis technique exclusively available to <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2190">Aura instruments</a>. Utilizing the principles of darkfield microscopy,6 SIMI is conducted on an Aura membrane plate using an oblique illumination source which emits light at an angle parallel to the surface of the plate.&nbsp;Compared to backgrounded membrane imaging (BMI), which utilizes brightfield microscopy (epi-illumination) where particles scatter the incident light isotropically (i.e., at all angles), side illumination membrane maging (SIMI) is a technique that is specifically designed to detect light scattering from high refractive index particles, as well as those that protrude out of the plane from the membrane surface. A particle’s average SIMI intensity is measured in a relative scale where the inherent SIMI scattering of the membrane is defined as SIMI = 0. Positive SIMI values indicate particles protruding out of the membrane, as is the case with microplastics, fibers, and other common extrinsic particles, whose average SIMI intensities vary from 0–255. On some occasions, like with metallic particles and absorbing oils, particles will have reduced light refraction relative to the membrane and thus display negative SIMI values, varying from 0 to -122.&nbsp;The majority of foreign, extrinsic particles exhibit a high refractive index and are mechanically rigid in structure, causing them to protrude from the membrane surface and scatter side illumination to a high degree, ideal for SIMI analysis. In contrast, biologic particles exhibit the opposite properties—low refractive index and malleable structures, causing them to lie flat with minimal side scatter profiles, which is best analyzed with BMI or fluorescence membrane microscopy (FMM). Utilizing all three microscopy approaches is most ideal to facilitate the determination of all extrinsic (non-biologic) and inherent (biologic) particles in biologic formulations.<h4>Conclusion&nbsp;</h4>SIMI is a unique approach to providing additional characterization of subvisible particles and is available in all Aura models to help rapidly identify foreign material in biological samples with a high degree of specificity. A key tertiary imaging mode in addition to BMI and FMM, SIMI provides selective, orthogonal morphological information to identify tall and rigid materials, a defining feature of most extrinsic particles (Figure 11). While particle sizing and counting is done via BMI, SIMI provides illumination, imaging, and analysis that can be useful across a variety of biological products to reveal foreign subvisible particles from the earliest to the latest of stages in the bioprocess.

News from LabRulezICPMS Library - Week 13, 2026

Article

Events

Application

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent Technologies

Agilent ICP Expert Software for the 5800/5900 ICP-OES and 5110/5100 ICP-OES systems features a familiar worksheet interface, easy method development, and preset methods to simplify your analysis and save you time.
Smart features make recommendations and solve problems before they happen, reducing the number of samples you have to remeasure and giving you more confidence in your results. Be assured of your analysis and compliance for your electronic records under the 21 CFR 11 regulations with the optional SCM and SDA software applications designed to support your lab requirement with ease. Learn more about how the new ICP-OES Expert Software can transform your ICP-OES workflow in this Part 3.
<blockquote>
Presenter: Paul Krampitz (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Graduate of Bowling Green State University with a Chemistry Bachelor of Science degree. Twenty – five years of Spectroscopy experience mainly Inductively Coupled Plasma (ICP) Spectroscopy as well as ICP-MS and AAS. Experience also includes X-Ray Fluorescence (ED, WD), Laser Ablation, Inorganic Speciation and Microwave Plasma Spectroscopy. Market Segment expertise includes environmental, petrochemical, metallurgical applications.
</blockquote>
<blockquote>
Presenter: Dr. Sima Singha (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>
<blockquote>
Presenter: Ana García-González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>

Agilent Technologies: Software BootCamp Kick-off - ICP-OES Part 3

Software BootCamp Kick-off - ICP-OES Part 3

How the new ICP-OES Expert Software can transform your ICP-OES workflow in this Part 3.

This will be a three week Food and Cannabis elemental analysis workshop. We will cover a lot of great information during these three weeks.
Part 1: We will cover the entire Agilent elemental portfolio. Each of the different instruments&#39; strengths and how they meet the challenges that food and cannabis labs have.
Part 2: We will focus on preparing your samples, including microwave digestion. We will also cover how to optimize your system for high matrix samples and a diverse sample set.
Part 3: We will put it all together, with running samples live in the lab. We will also share additional tips and tricks on obtaining excellent analytical results in these difficult matrices.
<blockquote>
Presenter: Jenny Nelson, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jenny Nelson received her Ph.D. in Analytical Chemistry from the University of Cincinnati in 2007, and her MBA from Saint Mary’s College of California in 2011. Currently, Jenny is an Application Scientist for the Life Science and Chemical Analysis team at Agilent Technologies, joining in 2012 (with a step away in 2019). Jenny is also an Adjunct Professor in the Department of Viticulture and Enology at the University of California, Davis, since 2013. Jenny has been very active with AOAC and ASTM over the past eight years, serving on expert review panels, chairing committees, and volunteering to develop new methods needed by the industry. Jenny has extensive experience in operating and method development for Inductively Coupled Plasma Mass Spectroscopy (ICP-MS), Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Microwave Plasma Atomic Emission Spectroscopy (MP-AES). Jenny has broad knowledge and experience in different speciation analysis for many sample matrices using GC-ICPMS and LC-ICPMS. As well as vast experience with sp-ICP-MS for many applications.
</blockquote>
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>
<blockquote>
Presenter: Mark Kelinske (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Kelinske is an Applications Chemist with Agilent Technologies, specializing in advanced ICP-MS and ICP-MS/MS techniques. He received his undergraduate and graduate degrees from Texas A&amp;M University in College Station, TX. Prior to Agilent, Mark was a senior research scientist and research group manager with Southern Research Institute in Birmingham, AL, where he focused on low-level analytical chemistry, method development, and research program management.
</blockquote>
<blockquote>
Presenter: Chris Conklin (Atomic Spectroscopy Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
With a degree from the University of Wisconsin – Eau Claire, Chris worked in, and lead, a quality control lab testing fine chemicals ranging from reagent grade to high purity. Over the course of 12 years in that role, Chris has run a variety of atomic elemental instruments and techniques including AA, ICP-OES, and ICP-MS. As a result, he has seen most of the periodic table in its elemental form and overcome the associated interferences. In 2018, Chris brought that knowledge and experience to his current role with Agilent as the Product Specialist for Atomic Spectroscopy supporting AA, MP-AES, and ICP-OES for the Eastern US.
</blockquote>

Agilent Technologies: Food and Cannabis Elemental Analysis Part 1: Elemental Workflows in the Food and Cannabis Lab

Elemental Workflows in the Food and Cannabis Lab

Agilent elemental portfolio. Each of the different instruments' strengths and how they meet the challenges that food and cannabis labs have.

Learn how to automate method building using smart features of the ICP-OES.
Run a quick scan of the sample using IntelliQuant and obtain sample insight and possible interferences without any calibration. Review your data like a pro with the new outlier flagging system and improve accuracy by selecting proper background and interference correction techniques.
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>

Agilent Technologies: Automate Method Development using a Smart ICP-OES

Automate Method Development using a Smart ICP-OES

Learn how to automate method building using smart features of the ICP-OES.

Automated wavelength selection and streamlined method development using IntelliQuant Screening on unknown sample matrices.
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>

Agilent Technologies: Discover an Automated Sample Screening that Intelligently Develops ICP-OES Methods

Discover an Automated Sample Screening that Intelligently Develops ICP-OES Methods

Automated wavelength selection and streamlined method development using IntelliQuant Screening on unknown sample matrices.

Discover an Automated Sample Screening

Familiarize yourself with the hardware and software of an ICP-OES.
Learn how to troubleshoot and select proper sample introduction system for different types of applications. Increase instrument uptime by learning routine maintenance.
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>

Agilent Technologies: ICP-OES: Basic Tips and Tricks and Maintenance

ICP-OES: Basic Tips and Tricks and Maintenance

How to troubleshoot and select proper sample introduction system for different types of applications.

This will be a three week Food and Cannabis elemental analysis workshop.
We will cover a lot of great information during these three weeks.
Part 1: We will cover the entire Agilent elemental portfolio. Each of the different instruments&#39; strengths and how they meet the challenges that food and cannabis labs have.
Part 2: We will focus on preparing your samples, including microwave digestion. We will also cover how to optimize your system for high matrix samples and a diverse sample set.
Part 3: We will put it all together, with running samples live in the lab. We will also share additional tips and tricks on obtaining excellent analytical results in these difficult matrices.
<blockquote>
Presenter: Jenny Nelson, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jenny Nelson received her Ph.D. in Analytical Chemistry from the University of Cincinnati in 2007, and her MBA from Saint Mary’s College of California in 2011. Currently, Jenny is an Application Scientist for the Life Science and Chemical Analysis team at Agilent Technologies, joining in 2012 (with a step away in 2019). Jenny is also an Adjunct Professor in the Department of Viticulture and Enology at the University of California, Davis, since 2013. Jenny has been very active with AOAC and ASTM over the past eight years, serving on expert review panels, chairing committees, and volunteering to develop new methods needed by the industry. Jenny has extensive experience in operating and method development for Inductively Coupled Plasma Mass Spectroscopy (ICP-MS), Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Microwave Plasma Atomic Emission Spectroscopy (MP-AES). Jenny has broad knowledge and experience in different speciation analysis for many sample matrices using GC-ICPMS and LC-ICPMS. As well as vast experience with sp-ICP-MS for many applications.
</blockquote>
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>
<blockquote>
Presenter: Mark Kelinske (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Mark Kelinske is an Applications Chemist with Agilent Technologies, specializing in advanced ICP-MS and ICP-MS/MS techniques. He received his undergraduate and graduate degrees from Texas A&amp;M University in College Station, TX. Prior to Agilent, Mark was a senior research scientist and research group manager with Southern Research Institute in Birmingham, AL, where he focused on low-level analytical chemistry, method development, and research program management.
</blockquote>
<blockquote>
Presenter: Chris Conklin (Atomic Spectroscopy Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
With a degree from the University of Wisconsin – Eau Claire, Chris worked in, and lead, a quality control lab testing fine chemicals ranging from reagent grade to high purity. Over the course of 12 years in that role, Chris has run a variety of atomic elemental instruments and techniques including AA, ICP-OES, and ICP-MS. As a result, he has seen most of the periodic table in its elemental form and overcome the associated interferences. In 2018, Chris brought that knowledge and experience to his current role with Agilent as the Product Specialist for Atomic Spectroscopy supporting AA, MP-AES, and ICP-OES for the Eastern US.
</blockquote>

Food and Cannabis Elemental Analysis Part 1: Elemental Workflows in the Food and Cannabis Lab

Food and Cannabis Elemental Analysis Part 1

Agilent Applications Scientists will demonstrate on live 8900 Triple Quad ICPMS and 5900 ICPOES instrumentation, the hardware, MassHunter and ICP Expert software as well as tuning and cleanliness strategies used and recommended in semiconductor facilities to reduce contamination, maximize sensitivity and minimize interferences.
<blockquote>
Presenter: Bert Woods (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Joined the Agilent ICP-MS team in 2004, with previous employment in the semiconductor industry with Dominion Semiconductor (IBM/Toshiba) and Micron. Bert is a 1997 Chemistry graduate of Radford University in Virginia and an avid Washington DC Sports fan.
</blockquote>
<blockquote>
Presenter: Emmett Soffey (ICP-MS Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Emmett Soffey is an ICP-MS Product Specialist and has been with HP/Agilent for 30 years. He received his undergraduate degree from Cornell University. Prior to Agilent he worked at Brookhaven National Labs studying acid rain in the Adirondack Mountains of northern NY and then went on to work at a number of commercial analytical labs operating GC and GC/MS. Emmett has been part of the Agilent ICP-MS team since 1995. He has worked on the development of new software tools, discrete sampling devices and the GC-ICP-MS interface. In his spare time Emmett spends time hiking in the beautiful Cascade Mountains of Washington State.
</blockquote>
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>
<blockquote>
Presenter: Chris Conklin (Atomic Spectroscopy Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
With a degree from the University of Wisconsin – Eau Claire, Chris worked in, and lead, a quality control lab testing fine chemicals ranging from reagent grade to high purity. Over the course of 12 years in that role, Chris has run a variety of atomic elemental instruments and techniques including AA, ICP-OES, and ICP-MS. As a result, he has seen most of the periodic table in its elemental form and overcome the associated interferences. In 2018, Chris brought that knowledge and experience to his current role with Agilent as the Product Specialist for Atomic Spectroscopy supporting AA, MP-AES, and ICP-OES for the Eastern US.
</blockquote>

Agilent Technologies: Demonstration of Trace Metals and Electronic Grade Materials Analysis Techniques and Strategies on live Instrumentation.

Demonstration of Trace Metals and Electronic Grade Materials Analysis Techniques and Strategies on live Instrumentation.

8900 Triple Quad ICPMS and 5900 ICPOES instrumentation, the hardware, MassHunter and ICP Expert software as well as tuning and cleanliness strategies.

Demonstration of Trace Metals and Electronic Grade Materials

The semiconductor industry uses a wide range of specialty chemicals in various steps of the manufacturing process.
Analysis and control of the elemental impurities in these reagents are essential for ensuring the integrity of the final product. In this webinar we will discuss how to overcome the challenges of trace level of impurity analysis in challenging matrices on ICP-OES and AA.
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>
<blockquote>
Presenter: Chris Conklin (Atomic Spectroscopy Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
With a degree from the University of Wisconsin – Eau Claire, Chris worked in, and lead, a quality control lab testing fine chemicals ranging from reagent grade to high purity. Over the course of 12 years in that role, Chris has run a variety of atomic elemental instruments and techniques including AA, ICP-OES, and ICP-MS. As a result, he has seen most of the periodic table in its elemental form and overcome the associated interferences. In 2018, Chris brought that knowledge and experience to his current role with Agilent as the Product Specialist for Atomic Spectroscopy supporting AA, MP-AES, and ICP-OES for the Eastern US.
</blockquote>

Agilent Technologies: Specialty Chemical Analysis using ICP-OES and AA

Specialty Chemical Analysis using ICP-OES and AA

How to overcome the challenges of trace level of impurity analysis in challenging matrices on ICP-OES and AA.

For most small environmental laboratories in private industry of government users have a predisposition of the difficulty that it takes to change techniques (from AA to ICP-OES or from ICP-OES to ICP-MS).
In the second Just Between Us webinar, we will have a live interview with user Tamika Black on her journey from wet chemistry to be the lead ICP-MS analyst at the City of Raleigh. It will start with a historical background of the laboratory and her professional life, and then we will begin the interview. 
Key Learning Objectives:
<ul>
<li>Learn the capabilities of a City Laboratory like the City of Raleigh 
</li>
<li>Learn what it takes to go from GFAA and FAAS to ICP-OES
</li>
<li>Learn why someone will switch from ICP-OES to ICP-MS
</li>
</ul>
<blockquote>
Presenter: Tamika Black )Senior Chemist, City of Raleigh)
</blockquote>
<blockquote>
Tamika is a native of North Carolina and graduated from UNC. She started at the City of Raleigh as a technician and it is now a Chemist in charge of the trace metals laboratory. In her 18 years at the City of Raleigh laboratory, she has done everything from wet chemistry to ICP-MS.
</blockquote>
<blockquote>
Presenter: Abe Gutierrez (Product Specialist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Abe is an Agilent Product Specialist with nearly 30 years’ experience with ICP-MS. Abe started as an applications chemist in the semiconductor industry and moved to Agilent/HP in 1996. Abe is a technical resource supporting the Agilent sales organization.
</blockquote>

Agilent Technologies: The Journey from AA to ICP-MS in a Municipal Laboratory

The Journey from AA to ICP-MS in a Municipal Laboratory

Learn the capabilities of a City Laboratory like the City of Raleigh. Learn what it takes to go from GFAA and FAAS to ICP-OES and from ICP-OES to ICP-MS.

AOAC has recently adopted Agilent’s method for the Determination of Heavy Metals in a Variety of Cannabis and Cannabis-Derived Products for &quot;first action” status.
We will share with the industry the efforts towards this goal, as well as other concenus methods we are working for the industry.
Agilent products and solutions are intended to be used for analytical testing of cannabis in laboratories where such use is permitted under state/country law.
<blockquote>
Presenter: Jenny Nelson, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Jenny Nelson received her Ph.D. in Analytical Chemistry from the University of Cincinnati in 2007, and her MBA from Saint Mary’s College of California in 2011. Currently, Jenny is an Application Chemist for the Life Science and Chemical Analysis team at Agilent Technologies, joining in 2012 (with a step away in 2019). Jenny is also an Adjunct Professor in the Department of Viticulture and Enology at University of California, Davis since 2013. Jenny has been very active with AOAC and ASTM over the past 8 years, serving on expert review panels, chairing committees, and volunteering to develop new methods needed by the industry.
</blockquote>
<blockquote>
Jenny has extensive experience in operating and method development for Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Jenny has broad knowledge and experience in different speciation analysis for many sample matrices using GC-ICPMS, LC-ICPMS. As well as vast experience with sp-ICP-MS, for many applications.
</blockquote>

Agilent Technologies: Developing Consensus Methods for the Cannabis Industry

Developing Consensus Methods for the Cannabis Industry

Agilent products and solutions are intended to be used for analytical testing of cannabis in laboratories where such use is permitted under state/country law.

ICPMS webinars focusing on ICP/OES - page 13