This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

New Food magazine

Agilent Technologies

Thermo Fisher Scientific

SelectScience

Welcome to Thermo Fisher Scientific’s Powering Productivity in Food and Environmental Testing webinar series!
ICP-MS instruments are common inorganic analysis tools for trace elemental analysis in the environmental industry due to their multi-element capability and ability to detect toxic elements below the levels required by regulations.
Instrument performance has evolved with ever more challenging regulations, and to meet requirements for new and emerging applications. However, the challenge of high matrix samples and achieving maximum instrument uptime is still an issue many laboratories face. The new Thermo ScientificTM iCAPTM RQplus ICP-MS and the Thermo Scientific iSC-65 Autosampler have been developed to face these productivity challenges head on.
This presentation highlights the key role that Thermo Scientific iCAP RQplus ICP-MS has in a modern high-throughput regulated environmental laboratory, with robust, automated handling of wide varieties of difficult sample matrices, from water to brines. In addition, the presenters explore the role of the supporting technologies of ICP-OES, and triple quadrupole ICP-MS in environmental analysis.
<blockquote>
Presenter: Jon Peters (Product Marketing Manager, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Jon Peters is a Product Marketing manager with Thermo Fisher Scientific specializing in Trace Elemental Analysis instrumentation. He applies his experience with atomic spectroscopy instrumentation, software, consumables, and sample introduction accessories to creating innovative marketing initiatives.
</blockquote>
<blockquote>
Presenter: Dr. Daniel Kutscher (Product Marketing Specialist, Thermo Fisher Scientific)
</blockquote>
<blockquote>
After graduation in Chemistry in 2007, Daniel obtained his PhD from the University of Oviedo in 2011. In the same year he joined Thermo Fisher Scientific and has had different roles in application development and marketing. Currently, he manages the Application Development for trace elemental analysis and GC/GC-MS products.
</blockquote>

Thermo Scientific: Powering through the complexity of elemental environmental analysis

Powering through the complexity of elemental environmental analysis

The key role that Thermo Scientific iCAP RQplus ICP-MS has in a modern high-throughput regulated environmental laboratory.

The complexity of elemental environmental analysis

Familiarize yourself with the hardware and software of an Agilent ICP-OES
Learn how to troubleshoot and select proper sample introduction system for different types of applications. Increase instrument uptime by learning routine maintenance.
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>

Agilent Technologies: Tips & Tricks to increase Productivity on ICP-OES

Tips & Tricks to increase Productivity on ICP-OES

Familiarize yourself with the hardware and software of an Agilent ICP-OES

This series will go through the Fundamentals of Atomic Spectroscopy, with a focus on Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES).
<blockquote>
Presenter: Ana García González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>

Agilent Technologies: Fundamentals of Atomic Spectroscopy: ICP-OES

Fundamentals of Atomic Spectroscopy: ICP-OES

Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES).

The switch to renewable energy sources and the need for efficient and cost-effective energy storage technologies has seen increased global demands for lithium-ion batteries and cathode materials.
Monitoring the elemental concentrations and impurities of these products are important as they can impact the performance of a battery. In this seminar we will discuss about how to set up an analysis for these challenging matrices on ICP-OES.
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>

Agilent Technologies: Elemental Analysis of Lithium-ion Battery Samples via ICP-OES

Elemental Analysis of Lithium-ion Battery Samples via ICP-OES

How to set up an analysis for these challenging matrices on ICP-OES.

Elemental Analysis of Lithium-ion Battery Samples via ICPOES

Three-day virtual workshop covering 200.7 and 6010 methods from sample preparation to report generation, all in an environment where you can interact with peers and application experts from Agilent, who will be there to answer all your analytical questions.
You will Learn:
<ul>
<li>EPA Drinking Water, Waste Water, and Soil Analysis
</li>
<li>QC Parameter Setup
</li>
<li>Requirements and Techniques for Measuring Tough Samples
</li>
<li>Tips to Achieve the Highest Sensitivity
</li>
<li>Sample Preparation and Digestion Techniques
</li>
<li>Standard and QC Preparation for Trace Metal Analysis
</li>
<li>Data Analysis &amp; Processing
</li>
<li>Report Generation and Customization
</li>
</ul>
<blockquote>
Presenter: Greg Gilleland (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Greg began his spectroscopy career in 1987 in Colorado, working at a series of environmental labs. After 14 years working in the world of commercial environmental labs, he moved on to a spectroscopy instrument manufacturer where he performed service and sales functions over the course of 11 years. He has been with Agilent Technologies, Inc., since 2012 in the role of Application Scientist for ICP-OES, MP-AES and AA products.
</blockquote>
<blockquote>
Presenter: Sima Singha, PhD (ICP-OES Application Scientist, Atomic Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Sima has over fifteen years of hands on experience as an applications scientist in the field of atomic spectroscopy. Before joining Agilent in 2017, managed an agricultural chemistry laboratory for the analysis of water, soil, and plant tissue digests using ICP-OES for various EPA methods. She received a Ph.D. degree in Chemistry from the University of Illinois at Chicago with numerous peer-reviewed publications.
</blockquote>
<blockquote>
Presenter: Ana García González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>

Agilent Technologies: Exploring QC Parameter Setup as well as Tips and Tricks for Measuring Tough Samples while Achieving the High Sensitivity

Exploring QC Parameter Setup as well as Tips and Tricks for Measuring Tough Samples while Achieving the High Sensitivity

200.7 and 6010 methods from sample preparation to report generation.

Exploring QC Parameter Setup as well as Tips and Tricks

Agilent Technologies: Bring it all together with Data Analysis & Processing as well as Report Generation and Customization

Bring it all together with Data Analysis & Processing as well as Report Generation and Customization

Bring it all together with Data Analysis & Processing

Agilent Technologies: A dive into Sample Preparation and Digestion Techniques as well as Calibration Standard and QC Preparation for Trace Metal Analysis

A dive into Sample Preparation and Digestion Techniques as well as Calibration Standard and QC Preparation for Trace Metal Analysis

A dive into Sample Preparation and Digestion Techniques

Mineral samples present several challenges when analyzing for trace elements by ICP-OES, these include complex matrices and potential interferences, that may ultimate affect the sensitivity of the system.
This webinar will show you how to overcome these challenges by developing simple and robust methods for more reliable and reproducible results.
<blockquote>
Presenter: Ana García González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>

Agilent Technologies: Geochemical Analysis at the Speed of Light with ICP-OES

Geochemical Analysis at the Speed of Light with ICP-OES

How to overcome these challenges by developing simple and robust methods for more reliable and reproducible results.

Have you fully exploited the potential of your analytical techniques in edible oil analysis? Our experts will reveal what you can achieve with CNSX-analysis, ICP-OES, AAS and UV/Vis in regulated standard analysis and beyond.
Price fluctuations, supply bottlenecks and export stops have highlighted in recent years how volatile and complex the supply chains of edible oils are. Exporters, importers and processors of edible oils face the challenges of rapid supplier qualification while achieving regulatory compliant, seamless, and efficient quality monitoring of their crude oil, intermediates and final products.
As agricultural products, edible oils are subject to natural quality fluctuations, while cultivation methods and long transport routes pose risks of contamination and oxidation. In addition, they go through a temperature- and additive-intensive process with the refinery, during which undesirable by-products can arise under certain circumstances.
Our webinar is aimed at industry, regulatory and contract laboratories involved in the analysis of edible oils. With combustion elemental analysis, ICP-OES, AAS and UV/Vis molecular spectroscopy, our experts will introduce four techniques which enable precise, efficient, and standard-compliant quality and process analysis of edible oils. They will also show you tips and tricks on how to exploit the additional potential for optimising your analytical workflows regarding the targeted and economic use of elaborate specific techniques.
Learn how to use these techniques for a variety of oils at different steps in the value and processing chain, and how to achieve optimal results and increase sample throughput.
Key learning points:
<ul>
<li>Explore how to carry out the comprehensive analysis of toxic elements, process inhibitors, catalyst poisons as well as the macro-mineral content with ICP-OES.
</li>
<li>Learn what combustion analysis can achieve in quality control and process monitoring, especially regarding the formation of unwanted compounds during refining.
</li>
<li>Discover how to streamline analytical workflows with quick screens for organic and inorganic Sulfur and Nitrogen as sum parameters with combustion analysis.
</li>
<li>Find out how to assess oxidation in oils via DOBI index, and how to monitor the efficiency of bleaching in refinery using UV/Vis spectrometry.
</li>
<li>Discover what AAS can do as an alternative spectrometric element technique in the analysis of edible oils.
</li>
<li>Meet our experts and discuss with us in the Q&amp;A.
</li>
</ul>
<blockquote>
Presenter: Dr. Angela Gröbel (Senior Product Manager / Expert Supervisor Chemical Analysis)
</blockquote>
<blockquote>
Angela is a Senior Product Manager and Expert Supervisor for the combustion elemental analysis and related sample preparation portfolio. She holds a PhD in analytical chemistry. Angela developed Analytik Jena’s first trace elemental analysis product line for organic matter, later she became an expert in determination of Sulfur, Nitrogen, and Chlorine across a broad range of industry segments, including oil and gas, food and agriculture and environmental protection. Since 2013 Angela has been Product Manager, responsible for the entire combustion elemental analysis and related sample preparation portfolio.
</blockquote>
<blockquote>
Presenter: Dr. Holger Sievers (Application Specialist Chemical Analysis)
</blockquote>
<blockquote>
Holger Sievers is an Application Specialist at Analytik Jena. He holds a PhD from the Technical University of Munich in the field of ultra-trace analysis of noble metals which he obtained after his Master’s focusing on inorganic and analytical chemistry. Holger joined Analytik Jena in 2018 after seven years of teaching at the University and is currently engaged in chemical analysis. His primary focus lies in atomic absorption spectrometry and element analysis in general.
</blockquote>
<blockquote>
Presenter: Sandra Wunsch (Application Specialist Chemical Analysis)
</blockquote>
<blockquote>
Sandra Wunsch has been an Application Specialist for molecular spectrometry at Analytik Jena since 2016. She has intense in-depth knowledge in scientific and industrial application of molecular spectrometry, and extensive experience in the market and application fields, especially in the areas of environment and food &amp; agriculture. As a graduated Nutritionist, she is an expert in the use of chemical analysis and especially the determination of molecular compounds in the food industry and related fields.
</blockquote>

New Food: Edible oil processing: How to monitor elements and compounds

Edible oil processing: How to monitor elements and compounds

How to use these techniques for a variety of oils at different steps in the value and processing chain, and how to achieve optimal results.

Hydrogen is one of the most promising energy carriers that can enable a low-carbon economy.
In this webinar, Maria Lyubimova, Hydrogen business development manager, HORIBA France, will discuss solutions for the full development and manufacturing lifecycle that are enabling a global adoption of hydrogen technologies.
Gain insight into how HORIBA is providing innovative development tools to help accelerate the adoption of hydrogen technologies. These tools allow engineers, researchers, and scientists to address tomorrow’s challenges and to improve performance, quality, and cost. Furthermore, explore HORIBA’s large panel of techniques such as Raman, fluorescence, glow discharge, particle size, ICP, AFM, ellipsometry, C/S and O/N/H analyzers, and impedance spectroscopy.
Key learning objectives
<ul>
<li>Learn more about the qualification of raw materials
</li>
<li>Understand cell and stack components research and development
</li>
<li>Learn more about the validation of processed materials
</li>
</ul>
Who should attend?
<ul>
<li>Scientists and engineers conducting R&amp;D on cells and components like bi-polar plates, gas diffusion layers, and membrane electrode assemblies for electrolysis.</li>
</ul>
<blockquote>
Presenter: Maria Lyubimova (Hydrogen business development manager, HORIBA France)
</blockquote>

SelectScience: Testing and measurement solutions for hydrogen technologies

Testing and measurement solutions for hydrogen technologies

Solutions for the full development and manufacturing lifecycle that are enabling a global adoption of hydrogen technologies.

ICPMS webinars focusing on ICP/OES - page 10