This leaflet is intended as a comprehensive checklist outlining the key steps to consider when participating in a proficiency testing (PT) scheme. Selection of an appropriate PT scheme must be ensured [1]. It provides essential tips to help participants avoid common mistakes and achieve successful outcomes. The main stages of PT participation are covered, from receipt of PT items through to the review of received evaluations [1-3]. Documentation of outcomes for many of the topics addressed below is recommended, particularly for accreditation purposes.&nbsp;<h4>1. Prior to PT participation&nbsp;</h4><ul><li>Verify that the PT provider has up-to-date billing, shipping and technical contact information for the laboratory.&nbsp;</li><li>Ensure that the laboratory has documented procedures in place or, if necessary, prepare procedures for: reviewing PT results upon receipt; taking corrective actions when assessments indicate poor performance; conducting periodic reviews of PT results over time; storing PT reports.&nbsp;</li></ul><h4>2. Receipt of PT items&nbsp;</h4><ul><li>Open the package of PT items immediately upon receipt to check their condition. Contact the PT provider and request a replacement if any PT items are missing, broken, leaking or otherwise compromised.&nbsp;</li><li>Study the PT provider’s instructions carefully to ensure they are clear and understandable (e.g. handling, storage, pre-treatment, preparation, reporting of results).&nbsp;</li><li>Register, identify, and mark the PT items according to normal procedures in the laboratory.&nbsp;</li><li>Store the PT items in accordance with any instructions provided.&nbsp;</li></ul><h4>3. Measurements&nbsp;</h4><ul><li>Read the instructions supplied by the PT provider carefully before starting the measurements.&nbsp;</li><li>Carry out the measurements under conditions as close as possible to routine testing, unless otherwise instructed by the PT provider.&nbsp;</li><li>Ensure that the analysis is carried out to meet any measurement deadline requirements.</li></ul><h4>4. Reporting results&nbsp;</h4><ul><li>Allow sufficient time for reporting the results to the PT provider.&nbsp;</li><li>Report all the information required by the PT provider.&nbsp;</li><li>Ensure that the results are reported in the requested format (e.g. units, number of significant figures, decimal places).&nbsp;</li><li>Ensure that the results you are going to submit are those that you intend, correcting for any identified transcription errors (e.g. mix-up of samples or analytes).&nbsp;</li><li>Confirm that the submission process of the results to the PT provider has been completed.&nbsp;</li></ul><h4>5. Reviewing PT reports&nbsp;</h4><ul><li>Read the PT report as soon as possible and check that your results and other information are correctly represented; report any errors immediately to the PT provider.&nbsp;</li><li>Take notice of any comments on the specific PT round, evaluation of performance, and other matters relevant to the results of the PT round which provide valuable context to your individual results.&nbsp;</li><li>Review your assessed performance carefully in accordance with your laboratory procedures.&nbsp;</li><li>Store the PT report according to internal procedures.&nbsp;</li></ul><h4>6. Follow-up on participation in a PT scheme&nbsp;</h4><ul><li>Investigate any poor performance in accordance with your laboratory quality system [4].&nbsp;</li><li>Evaluate the impact of poor performance (e.g. risk that poor quality data may have been reported to customers).&nbsp;</li><li>Implement any corrective actions as relevant, and if possible, make use of any surplus PT items [5] to assess effectiveness.&nbsp;</li><li>Monitor any trends in performance over time, concentration levels, etc.&nbsp;</li></ul><blockquote>Information about PT providers and PT schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organizations.</blockquote>

Basic instructions for participants in a proficiency testing scheme

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 9th March 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Metrohm, Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: Spectral Transmission Measurements of Pharmaceutical Packaging</h3>Using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV%E2%80%91Vis">Agilent Cary 60 UV‑Vis</a> Diffuse Reflectance Accessory following EP &lt;3.2.1&gt;, USP &lt;660&gt;, and USP &lt;661.2&gt;<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_pharmaceutical_packaging_transmission_cary_60_uv_vis_dra_5994_8889en_agilent_2c933e5576.pdf">Full PDF for download</a></li></ul>Pharmaceutical containers play a significant role in maintaining final drug stability, integrity, and safety, from manufacturing to distribution to the end user. The ability of the packaging system to protect the drug from external agents is critical for quality assurance. Therefore, all pharmaceutical packaging systems must conform to stringent standards.&nbsp;Plastic and glass are commonly used materials for packaging, and they are typically transparent or opaque. Transparency to ultraviolet (UV) light can pose a risk to light‑sensitive pharmaceuticals, as exposure can initiate adverse—and sometimes harmful—photochemical reactions that can significantly affect drug quality and reduce shelf-life.1&nbsp;The EP and USP define well-established standards, designed to measure physiochemical and functional properties of packaging components intended to contain a drug product (pharmaceutical containers), to meet regulatory requirements. The EP Chapter &lt;3.2.1&gt; Glass Containers for Pharmaceutical Use includes a functionality test method to demonstrate adequate light resistance of colored glass containers through spectral transmission measurement. An included acceptance criterion specifies the allowed maximum amount of light transmitted by the tested material, defined by the drug product dosage administration form. For example, for glass containers that package oral drug products, the acceptance criterion defines that the observed spectral transmission should not exceed 10% at any wavelength in the range of 290 to 450 nm (&lt; 10%T).2 The identical test and criterion are found in USP Chapter &lt;660&gt; Containers – Glass.3 In addition, the USP Chapter &lt;661.2&gt; Plastic Packaging Systems for Pharmaceutical Use also includes the analogous functionality test method and acceptance criterion for plastic pharmaceutical packaging.4&nbsp;The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV%E2%80%91Vis">Cary 60 UV-Vis spectrophotometer</a>, equipped with the Cary 60 UV-Vis DRA, was chosen for measurement due to its extended ability to reliably measure precise transmission of scattering materials (Figure 1). The Cary 60 UV-Vis is a versatile spectrophotometer; however, measuring materials like plastics and glass, which are textured, translucent, or opaque in a manner that scatters light can result in challenges in satisfactorily measuring light transmittance with standard techniques. In a standard spectrophotometer, scattering materials tend to diffuse transmitted light, deviating an unquantifiable amount of light from the direct optical path of the detector. The detector may not collect all the scattered (lost) light, resulting in inaccurate measurements and results.&nbsp;For this reason, the Cary 60 UV-Vis was equipped with an internal DRA, which uses a 50 mm integrating PTFE-coated sphere that easily sits inside the spectrophotometer's sample compartment. For these applications, using a DRA can optimize light collection. The sphere's design captures all scattered light uniformly, overcoming scattering losses for accurate measurement of transmitted light. In applications where total transmission is crucial for quality assurance, the DRA is an essential tool for accurate measurements.<h4>Conclusion&nbsp;</h4>In this application note, an Agilent Cary 60 UV-Vis spectrophotometer, fitted with an Agilent Cary 60 UV‑Vis DRA, was used to reliably and quickly determine the spectral transmission of packaging systems used for pharmaceuticals, following the EP &lt;3.2.1&gt;, USP &lt;660&gt;, and USP &lt;661.2&gt; test methods for functionality of light-resistant packaging systems. The integrating sphere enabled the instrument to accurately measure total transmittance of plastic and glass (scattering) materials.&nbsp;All containers presented less than the defined maximum %T specification, demonstrating light-resistance functionality for containing light-sensitive drug products for oral administration. This method illustrates the importance of accurate testing for quality assurance of pharmaceutical packaging. The Agilent Cary 60 UV-Vis spectrophotometer, paired with Cary WinUV Pharma software, delivers secure data management and compliance for regulated pharmaceutical labs.<h3>2. Metrohm: Multiparameter hops analysis by near-infrared spectroscopy (NIRS)</h3>Rapid determination of alpha acids, beta acids, cohumulone content, total oil content, HSI, and moisture<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nir_130_download_6177b89ee1.pdf">Full PDF for download</a></li></ul>The quality of hops and hop pellets is vital across the entire brewing supply chain. Traditional methods used for quality control (e.g., titration and HPLC) are highly accurate and widely accepted. They are also time consuming, labor intensive, and dependent on chemical reagents which not only incur ongoing material costs but also require careful handling and proper disposal. Near-infrared spectroscopy (NIRS) offers a compelling alternative when ultra-high precision is not necessary. It enables the rapid analysis of multiple parameters within a minute without using any chemicals. This Application Note outlines the measurement setup and the results of cohumulone, hop oils, and moisture content, the hop storage index (HSI), and hops acids analysis with NIRS.<h4>EXPERIMENTAL EQUIPMENT&nbsp;</h4>More than 500 fresh hop samples and ground hop pellets were analyzed on an <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=220&amp;search=omnis+nir">OMNIS NIR Analyzer Solid</a> (Figure 1). The samples were added to an OMNIS sample cup and analyzed in diffuse reflection mode. To include sample variety, the sample rotated during measurement to collect spectra from different locations. The automatically averaged spectra were used for model development. Spectra acquisition, model development, and validation were carried out with the OMNIS Software.&nbsp;Reference values for alpha acids were obtained using various official methods, including EBC 7.4, EBC 7.5, and EBC 7.7. Total oils and beta acid content were determined using EBC 7.4, while EBC 7.7 was employed for cohumulone analysis. Moisture content and the hop storage index (HSI) were measured using a halogen moisture analyzer and a UV-VIS photometer, respectively.<h4>CONCLUSION</h4>This Application Note demonstrates the feasibility of using NIR spectroscopy for the analysis of freshly harvested hops and ground hop pellets to determine cohumulone, moisture, and total oil content, HSI, and alpha and beta acids. Using alpha acids as an example, the difference between a prediction model covering the full concentration range and a model specific to a narrower range was highlighted. The latter reduced the prediction error by a factor of two.&nbsp;Users can apply this approach to maximize accuracy. In the OMNIS Software, both models can be combined to automatically perform the following sequence. First, the alpha acid concentration is estimated using the broad-range model; then, a more precise prediction is made using the restricted-range model.<h3>3. Shimadzu: Observation of Acrylic Block Fracture during Impact Compression Using the Hopkinson Bar Method</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01146_en_dc42e77a9c.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>The HPV -X3 offers three times the resolution of conventional models, enabling observation of specimen fracture at much higher resolution.</li><li>With a maximum frame rate of 20 Mfps, the HPV-X3 is well-suited for observing high-speed phenomena such as an impact test</li></ul>Understanding materials properties is critical to product design. In particular, for applications such as transportation equipment, where materials may be subjected to impact loads, it is essential to evaluate not only static properties but also impact properties. When subjected to impact, materials may exhibit stress and strain characteristics different from those under static loading, making it essential to quantify these characteristics through impact testing.&nbsp;The Hopkinson bar method is a well-established technique for impact compression testing. Proposed by B. Hopkinson, this method enables detailed analysis of a material’s impact response and evaluation of its fracture properties by subjecting the specimen to a sudden force using a bar-launching device. This paper presents an example of an impact compression test on an acrylic specimen with a central circular hole, recorded with an HPV-X3 high-speed video camera (Fig. 2) using the Hopkinson bar method.<h4>Imaging System&nbsp;</h4>The imaging devices are listed in Table 1, and the imaging conditions are listed in Table 2. As shown in Fig. 4(b), laser illumination was directed from the rear of the specimen toward the lens, and imaging was performed with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X3">HPV-X3</a> using a close-up ring, bellows, and macro lens. This setup enabled observation of the fracture process in the acrylic block. Two types of imaging were conducted: observation of crack propagation immediately after loading, and observation of subsequent fracture.<h4>Conclusion&nbsp;</h4>The impact compression test of an acrylic specimen using the Hopkinson bar method was observed using the HPV-X3 highspeed video camera. Inside the compressed specimen, the propagation of a wavefront believed to be a stress wave was first observed. Subsequently, cracks propagated from the central circular hole toward the left and right surfaces, and finally, diagonal cracks formed, leading to complete fracture. The progress of this series of fracture processes was clearly captured.&nbsp;The HPV-X3 has three times the resolution of the previous <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X2">HPVX2 model</a>, enabling more detailed observation of specimens during impact tests, including the Hopkinson bar method. Furthermore, because fracture phenomena during impact testing occur at high speeds, the HPV-X3, which can record images at up to 20 Mfps, is ideal for capturing them.<h3>4. Thermo Fisher Scientific: Analysis of silica in air filters using ARL X’TRA Companion X-ray Diffractometer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/analysis_of_silica_in_air_an41521_a3b8eb33d5.pdf">Full PDF for download</a></li></ul>The analysis of silica in air filters is a critical aspect of occupational health and safety, aimed at protecting workers from the harmful effects of inhaling crystalline silica particles, which can lead to diseases such as silicosis and lung cancer. The NIOSH 7500 method (NIOSH, 2003) provides a detailed and standardized procedure for the determination of crystalline silica in air samples using X-ray diffraction (XRD). This method involves the collection of air samples on filters, which are then analyzed to identify and quantify the crystalline silica phases, including quartz, cristobalite, and tridymite.&nbsp;XRD is chosen for its high specificity and sensitivity in distinguishing different crystalline forms of silica, making it a reliable analytical technique. The method outlined in NIOSH 7500 requires meticulous sample preparation, including the proper collection and handling of air filters, calibration with known standards, and strict adherence to analytical parameters to ensure accurate and reproducible results. Following the NIOSH 7500 norm and equivalent standards helps ensure the reliable monitoring of workplace air quality, thereby safeguarding workers’ health. The use of XRD in analyzing silica in air filters is an essential component of industrial hygiene and environmental monitoring programs, facilitating the detection and control of hazardous silica exposure in occupational settings.<h4>Instrument and software&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2296">Thermo Scientific™ ARL™ X’TRA Companion X-ray Diffractometer</a> (c.f. Figure 1) is a simple, easy-to-use benchtop XRD instrument for routine phase analysis as well as more advanced applications. The ARL X’TRA Companion XRD uses a θ/θ goniometer (160 mm radius) in Bragg-Brentano geometry coupled with a 600 W X-ray source (Cu or Co). The radial and axial collimation of the beam is controlled by divergence and Soller slits, while air scattering is reduced by a variable beam knife. An integrated water chiller is available on demand. Thanks to the innovative solid state pixel detector (55 x 55 μm pitch), the ARL X’TRA Companion XRD provides very fast data collection and comes with one-click Rietveld quantification capabilities and automated result transmission to a LIMS (laboratory information management system).<h4>Your benefits&nbsp;</h4>The ARL X’TRA Companion XRD provides data perfectly suited to quantify respirable quartz in air filters. Utilizing a calibration curve in a one-click refinement delivers results within minutes, ensuring ease-of-use for operators and reducing training requirements. XRD analysis of air filter samples complies with the NIOSH 7500 standard.

News from LabRulezICPMS Library - Week 11, 2026

How can we make the production of supercapacitors for energy storage more sustainable and replace the traditionally used but toxic solvent NMP (N-methyl-2-pyrrolidone)? According to scientists from CATRIN at Palacký University, the “green” solvents Cyrene and Tamisolve may be a suitable alternative. In an article published in the <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S1385894725130696?via%3Dihub#s0060">Chemical Engineering Journal</a>, they have shown that these solvents can be used in production without reducing the performance of the equipment. They thus offer a path to the next generation of sustainable, high-performance supercapacitors for industrial use.“Supercapacitors are one of the modern technologies for storing electric energy. As sustainable energy storage becomes more prominent, it is essential to replace the hazardous solvents used in the production of supercapacitor electrodes. Our study presents Cyrene and Tamisolve as environmentally friendly alternatives to the toxic solvent NMP, which is traditionally used in production. Both tested solvents enabled the preparation of electrodes that maintain high electrochemical performance while improving environmental compatibility,” said Michal Otyepka, corresponding author of the article.The electrodes were prepared using nitrogen-doped graphene as the active material in combination with two types of binders. The first was a common fluorinated binder (PVDF), which is widely used in industry, including in the manufacturing of battery electrodes. The researchers also tested a fluorine-free binder (PVP), which has a lower environmental impact and is more soluble in environmentally friendly solvents. Using various combinations, they monitored the performance and stability of the electrodes as well as their mechanical resistance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CATRIN_Vedci_z_CATRIN_nabizeji_zelenejsi_cestu_pro_vyrobu_superkondenzatoru_443775296a.jpg" alt="CATRIN: CATRIN researchers offer a “greener” way to make supercapacitors" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CATRIN_Vedci_z_CATRIN_nabizeji_zelenejsi_cestu_pro_vyrobu_superkondenzatoru_443775296a.jpg 245w," sizes="100vw" width="1536" height="768">“The results showed that not only can the alternative solvents Cyrene and Tamisolve fully replace the toxic solvent NMP, but also that the prepared electrodes have the necessary mechanical properties. Their compatibility with both fluorinated PVDF and non-fluorinated PVP binders, together with excellent layer uniformity and electrochemical stability, makes them ideal for use in scalable applications. This is essential for industrial production,” said the publication’s first author, Ivan Dědek.Cyrene, or dihydrolevoglucosenone, is obtained from renewable biomass sources such as cellulose. Tamisolve (N-butyl-2-pyrrolidone) is a substance related to the commonly used NMP, but is more gentle on human health and the environment.Supercapacitor research has been a priority at CATRIN for almost ten years. In addition to developing new active materials, such as the successful nitrogen-doped graphene (SC-GN3), it also focuses on environmentally friendly and industrially feasible manufacturing processes. The replacement of toxic NMP with the “greener” solvents Cyrene and Tamisolve confirms that more sustainable production can go hand in hand with high performance and represents an important step towards industrial implementation.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S1385894725130696?via%3Dihub#s0060">Toward transitioning to green and sustainable supercapacitors</a></h4>Ivan Dědek, Vojtěch Kupka, Veronika Šedajová, Petr Jakubec, Matěj Navrátil, Michal Otyepka&nbsp;Chemical Engineering Journal, 529, 2026, 172220<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.cej.2025.172220">https://doi.org/10.1016/j.cej.2025.172220</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>The rapid advancement of supercapacitor technologies has intensified the demand for sustainable electrode fabrication methods that minimize environmental impact. A major challenge arises from the extensive use of the toxic solvent N-methyl-2-pyrrolidone (NMP), which is subject to increasingly stringent regulatory restrictions. We demonstrate that NMP can be effectively replaced with two green solvents, dihydrolevoglucosenone (Cyrene) and N-butyl-2-pyrrolidone (Tamisolve), without compromising electrochemical performance. Electrode formulations were prepared using nitrogen-doped graphene as the active material, in combination with either polyvinylidene fluoride (PVDF), a widely employed fluorinated binder, or polyvinylpyrrolidone (PVP), a non-fluorinated alternative with improved environmental profile. Optimized coatings exhibited high mass loadings exceeding 6 mg cm−2 while maintaining strong adhesion to current collectors, an often overlooked yet critical parameter for scalable manufacturing. Electrochemical testing revealed that PVDF in Cyrene delivered an energy density of 66.6 Wh kg−1 at a power density of 1.85 kW kg−1, with excellent cycling stability, retaining 91 % of capacitance after 100,000 cycles. PVP in Cyrene provided a more environmentally benign alternative, achieving an energy density of 64.2 Wh kg−1 at 1.80 kW kg−1, with 78 % capacitance retention after 100,000 cycles, thereby highlighting the trade-off between performance and sustainability.

CATRIN researchers offer a “greener” way to make supercapacitors

Article

Application

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

The Czech Advanced Technology and Research Institute (CATRIN) at Palacký University is a cutting-edge scientific hub dedicated to advancing research in the fields of nanotechnology, biotechnology, and biomedicine. At its core, CATRIN boasts outstanding scientific teams, featuring international researchers. We emphasize interdisciplinarity, foster global collaborations, and work to translate our research findings into practical applications.

CATRIN

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Thermo Scientific™ FlashSmart™ Elemental Analyzer NC/Soil

The Thermo Scientific™ FlashSmart™ Elemental Analyzer (EA), based on the modified Dumas Method, is a flexible solution that expands your CHNS/O analysis with over 20 configurations in one system.

<h3>Lead the way in elemental analysis with a single instrument handling all applications.</h3>You and your team can solve more laboratory challenges, improve workflow and minimize downtime. The Thermo Scientific™ FlashSmart™ Elemental Analyzer (EA), based on the modified Dumas Method, is a flexible solution that expands your CHNS/O analysis with over 20 configurations in one system. Powerful software supports automated and precise reports, making everything easier for you and your team.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_2_efeac51a98.jpg" alt="Thermo Scientific™ FlashSmart™ Elemental Analyzer NC/Soil" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_2_efeac51a98.jpg 245w," sizes="100vw" width="1424" height="888"><h3>Why choose the FlashSmart EA?</h3><h4>The confident choice</h4><ul><li>Precise and reliable system that delivers accurate results</li><li>Easy maintenance</li><li>Easy to use for reduced need for staff training</li><li>Modern design combines simple user input with dedicated software features</li><li>Better return on investment as the system is modular and grows with your analytical requirements</li></ul><h4>Simple</h4><ul><li>Gas chromatographic method for real-time view of the analytical process and pathway: anytime, anywhere</li><li>Streamlined sample preparation without the need for dangerous chemicals as Kjeldahl Method</li><li>Complete EA software for effortless operation</li></ul><h4>Modular</h4><ul><li>Over 20 configurations in one instrument: no need for software upgrade</li><li>Up to two autosamplers on the same analyzer</li><li>Higher sample throughput and automation with the Thermo Scientific™ MultiValve Control (MVC) Module, without manual intervention</li><li>Operates with helium and argon as carrier gas</li></ul><h4>Automated</h4><ul><li>Unattended operation of the FlashSmart EA: analyses can run 24/7 for complete results anytime, anywhere</li><li>Dedicated Thermo Scientific™ EagerSmart™ Data</li><li>Handling Software controlling all analytical parameters, Thermo Scientific™ OxyTune™ Function, an autosampler and the MVC Module</li><li>Lower cost per analysis and greater productivity</li></ul><h4>Accurate</h4><ul><li>Certified and uncompromised precision and accuracy for a wide range of applications, from research to routine analysis</li><li>Compliance with most recognized EA Official Methods: AOAC, AOCS, AACC, ASTM, ASBC, ISO, EN, CEN, EPA, IFFO</li><li>OEA CookBook with thousands of determinations and methods for optimal results</li></ul><h4>Robust</h4><ul><li>Robust, specially designed features that you can rely on for decades</li><li>GC separation column operating for years without the need for replacement: it is not a consumable</li><li>Long term investment for your laboratory, which guarantees reliability and accuracy of analysis</li></ul><h3>Access more applications: become the reference laboratory in your field</h3>No matter which direction you take, your lab and equipment will be able to adapt to support any strategy. Flexible systems enable you to react to the new, whilst delivering accurate and reproducible results. With the FlashSmart EA your lab can easily handle varying sample types, obtain from 1 to 5 element determinations and achieve maximum sample throughput.<h4>NC Soil Configuration</h4><ul><li>Determination of Total Nitrogen, Total Carbon, and Total Organic Carbon.</li><li>Environmental: Soils, sediments, and rocks, composts, wastes, sewage/sludge, pesticides, water solution, waste water, particulates in air by filters, particulates in water by filters, and woods.</li><li>Material Characterization: Battery, glue/resins, papers, rubbers, cement, ceramics, carbon/glass fibers, tires, pigments and dyes, refractory materials, building materials, inorganic materials, metals, textile fibers, and wood powders.</li><li>Agronomy &amp; Marine Science: Soil, plants (leaves, roots, fruit), sediments, humus, algae, plankton, particulate matter in water by filters, water, and fertilizer.</li></ul><h3>Performance that takes you further</h3>With powerful yet easy operation, your team can process more samples every day. When you need to analyze more elements, you can adapt the FlashSmart EA on-site to your applications or add a second reactor to unlock more capabilities.<h4>Instantly connect</h4><ul><li>Thermal Conductivity Detector (TCD)</li></ul><h4>Sample introduction modularity</h4><ul><li>Up to two Thermo Scientific™ MAS Plus Autosamplers</li><li>One MAS Plus Autosampler and one manual liquid sampler</li></ul><h4>Carrier gas options</h4><ul><li>Helium</li><li>Argon option for lower cost and regular supply</li><li>Switch to nitrogen or argon when in Stand-By Mode</li></ul><h4>Gas chromatographic method: real-time analysis</h4><ul><li>Proper quantification of the five elements</li><li>“Open window” function giving information on what is happening inside the analyzer in real-time</li><li>Straightforward and intuitive workflow without valves</li><li>No absorption or desorption of gases needed</li></ul><figure class="image"><img style="aspect-ratio:1482/903;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_3_ae03e912c7.jpg" alt="Thermo Scientific™ FlashSmart™ Elemental Analyzer NC/Soil" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_3_ae03e912c7.jpg 245w," sizes="100vw" width="1482" height="903"></figure><h3>Software automates consistent sampling and reports</h3><h4>Software</h4>The Thermo Scientific EagerSmart Data Handling Software allows you to leave the FlashSmart EA unattended to get completed analysis, with full, user-friendly reports. The software controls all analytical parameters, flows, autosamplers and detectors, by suggesting the most favourable analytical conditions for your samples.<ul><li>Automated transfer of the sample weight from the balance to the software</li><li>Automated evaluation of Heat Values (Gross and Net Heat Values) for fuels and alternative fuels</li><li>CO2 Emission Trade for environmental control</li><li>Different Protein Factors for food and animal feed</li><li>Inserting of the Humidity value for solid samples and of the Density for liquid samples</li><li>Automated Minimal Formula determination for pharmaceutical or fine chemicals applications</li><li>Automated evaluation of C/N, C/H and C/S ratio</li><li>Automated data transfer to Microsoft Excel, LIMS and others</li></ul><h4>Automated functions</h4><ul><li>Auto-Start</li><li>Auto-Ready</li><li>Auto-Stand-By</li><li>Auto-Off</li><li>Auto Leak Test</li></ul><h4>Unique and dedicated OxyTune function</h4>The Thermo Scientific OxyTune Function automatically evaluates the oxygen needed for combustion, according to the weight and nature of your sample.<h4>MultiValve Control Module: future-proof lab with more throughput and less costs</h4>By switching the analysis from the left channel to the right one (or viceversa), the MVC Module increases your analysis throughput. When the system is not in use overnight, on weekends, or for a prolonged period of time you can also reduce helium consumption and overall cost of analysis by switching from helium to nitrogen or argon.<ul><li>Fully automated and software controlled</li><li>No need to change hardware or software configuration</li><li>Optional feature for extended lab throughput</li><li>Easy to add</li></ul>

Thermo Scientific™ FlashSmart™ Elemental Analyzer N/Protein

<h3>Lead the way in elemental analysis with a single instrument handling all applications.</h3>You and your team can solve more laboratory challenges, improve workflow and minimize downtime. The Thermo Scientific™ FlashSmart™ Elemental Analyzer (EA), based on the modified Dumas Method, is a flexible solution that expands your CHNS/O analysis with over 20 configurations in one system. Powerful software supports automated and precise reports, making everything easier for you and your team.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_2_efeac51a98.jpg" alt="Thermo Scientific™ FlashSmart™ Elemental Analyzer N/Protein" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_2_efeac51a98.jpg 245w," sizes="100vw" width="1424" height="888"><h3>Why choose the FlashSmart EA?</h3><h4>The confident choice</h4><ul><li>Precise and reliable system that delivers accurate results</li><li>Easy maintenance</li><li>Easy to use for reduced need for staff training</li><li>Modern design combines simple user input with dedicated software features</li><li>Better return on investment as the system is modular and grows with your analytical requirements</li></ul><h4>Simple</h4><ul><li>Gas chromatographic method for real-time view of the analytical process and pathway: anytime, anywhere</li><li>Streamlined sample preparation without the need for dangerous chemicals as Kjeldahl Method</li><li>Complete EA software for effortless operation</li></ul><h4>Modular</h4><ul><li>Over 20 configurations in one instrument: no need for software upgrade</li><li>Up to two autosamplers on the same analyzer</li><li>Higher sample throughput and automation with the Thermo Scientific™ MultiValve Control (MVC) Module, without manual intervention</li><li>Operates with helium and argon as carrier gas</li></ul><h4>Automated</h4><ul><li>Unattended operation of the FlashSmart EA: analyses can run 24/7 for complete results anytime, anywhere</li><li>Dedicated Thermo Scientific™ EagerSmart™ Data</li><li>Handling Software controlling all analytical parameters, Thermo Scientific™ OxyTune™ Function, an autosampler and the MVC Module</li><li>Lower cost per analysis and greater productivity</li></ul><h4>Accurate</h4><ul><li>Certified and uncompromised precision and accuracy for a wide range of applications, from research to routine analysis</li><li>Compliance with most recognized EA Official Methods: AOAC, AOCS, AACC, ASTM, ASBC, ISO, EN, CEN, EPA, IFFO</li><li>OEA CookBook with thousands of determinations and methods for optimal results</li></ul><h4>Robust</h4><ul><li>Robust, specially designed features that you can rely on for decades</li><li>GC separation column operating for years without the need for replacement: it is not a consumable</li><li>Long term investment for your laboratory, which guarantees reliability and accuracy of analysis</li></ul><h3>Access more applications: become the reference laboratory in your field</h3>No matter which direction you take, your lab and equipment will be able to adapt to support any strategy. Flexible systems enable you to react to the new, whilst delivering accurate and reproducible results. With the FlashSmart EA your lab can easily handle varying sample types, obtain from 1 to 5 element determinations and achieve maximum sample throughput.<h4>N/Protein Analyzer Configuration</h4><ul><li>Determine crude protein in human food and animal feed using quality certified Reference Material, included as standard.</li><li>Food Safety: Human food and animal feed, beverages (beer, juice, milk, wine, soft drinks...).</li></ul><h3>Performance that takes you further</h3>With powerful yet easy operation, your team can process more samples every day. When you need to analyze more elements, you can adapt the FlashSmart EA on-site to your applications or add a second reactor to unlock more capabilities.<h4>Instantly connect</h4><ul><li>Thermal Conductivity Detector (TCD)</li></ul><h4>Sample introduction modularity</h4><ul><li>Up to two Thermo Scientific™ MAS Plus Autosamplers</li><li>One MAS Plus Autosampler and one manual liquid sampler</li></ul><h4>Carrier gas options</h4><ul><li>Helium</li><li>Argon option for lower cost and regular supply</li><li>Switch to nitrogen or argon when in Stand-By Mode</li></ul><h4>Gas chromatographic method: real-time analysis</h4><ul><li>Proper quantification of the five elements</li><li>“Open window” function giving information on what is happening inside the analyzer in real-time</li><li>Straightforward and intuitive workflow without valves</li><li>No absorption or desorption of gases needed</li></ul><figure class="image"><img style="aspect-ratio:1482/903;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_3_ae03e912c7.jpg" alt="Thermo Scientific™ FlashSmart™ Elemental Analyzer N/Protein" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Flash_Smart_Elemental_Analyzer_CHNS_O_3_ae03e912c7.jpg 245w," sizes="100vw" width="1482" height="903"></figure><h3>Software automates consistent sampling and reports</h3><h4>Software</h4>The Thermo Scientific EagerSmart Data Handling Software allows you to leave the FlashSmart EA unattended to get completed analysis, with full, user-friendly reports. The software controls all analytical parameters, flows, autosamplers and detectors, by suggesting the most favourable analytical conditions for your samples.<ul><li>Automated transfer of the sample weight from the balance to the software</li><li>Automated evaluation of Heat Values (Gross and Net Heat Values) for fuels and alternative fuels</li><li>CO2 Emission Trade for environmental control</li><li>Different Protein Factors for food and animal feed</li><li>Inserting of the Humidity value for solid samples and of the Density for liquid samples</li><li>Automated Minimal Formula determination for pharmaceutical or fine chemicals applications</li><li>Automated evaluation of C/N, C/H and C/S ratio</li><li>Automated data transfer to Microsoft Excel, LIMS and others</li></ul><h4>Automated functions</h4><ul><li>Auto-Start</li><li>Auto-Ready</li><li>Auto-Stand-By</li><li>Auto-Off</li><li>Auto Leak Test</li></ul><h4>Unique and dedicated OxyTune function</h4>The Thermo Scientific OxyTune Function automatically evaluates the oxygen needed for combustion, according to the weight and nature of your sample.<h4>MultiValve Control Module: future-proof lab with more throughput and less costs</h4>By switching the analysis from the left channel to the right one (or viceversa), the MVC Module increases your analysis throughput. When the system is not in use overnight, on weekends, or for a prolonged period of time you can also reduce helium consumption and overall cost of analysis by switching from helium to nitrogen or argon.<ul><li>Fully automated and software controlled</li><li>No need to change hardware or software configuration</li><li>Optional feature for extended lab throughput</li><li>Easy to add</li></ul>

Thermo Scientific™ EA IsoLink™ IRMS System

With the Thermo Scientific™ EA IsoLink™ IRMS Platform, leverage familiar technology and existing expertise for expanded CNSOH isotope analysis, allowing all elemental analysis on a single platform.

<h3>All your elemental analysis on one platform</h3>The EA IsoLink IRMS Platform leverages the existing technological platform of the EA IsoLink IRMS System and FlashSmart EA.<h4>More freedom. More flexibility.</h4>With the Thermo Scientific™ EA IsoLink™ IRMS Platform, you can leverage familiar technology and your staff’s existing know-how for expanded CNSOH isotope analysis, enabling you to perform all your elemental analysis on one technological platform. With different configurations to choose from, your lab can get the capabilities it needs today, with flexibility for the future. Featuring software- driven automation and scalability to grow as you do.<h4>Choose the configuration that’s right for you.</h4>The EA IsoLink IRMS System is an automated, easy-to-use solution for isotopic analysis of carbon, nitrogen, sulfur, oxygen and hydrogen - using bulk samples powered by chromatography-driven technology with high sensitivity on small samples. Available in basic configurations with upgradeability options, this platform offers high throughput and unattended operation, so your lab can get more done in less time.<h4>The EA IsoLink IRMS System features:</h4><ul><li>Thermo Scientific™ Flash™ IRMS EA for sample preparation for IRMS analysis</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2231">Thermo Scientific™ ConFlo IV</a> Universal Interface</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2232">Thermo Scientific™ DELTA™ Q IRMS</a></li></ul><h4>The FlashSmart EA features:</h4><ul><li>Thermo Scientific™ FlashSmart™ EA for weight percentage characterization of CNSHO</li></ul><h3>EA IsoLink CN and CN/OH</h3><ul><li>A powerful solution for C and N, O and H analysis - upgradeable for S analysis</li></ul><h3>EA IsoLink OH</h3><ul><li>Offering dedicated oxygen and hydrogen analysis - with scalability to expand your capabilities to C, N and S</li></ul><h3>EA IsoLink CNSOH</h3><ul><li>A fully automated single system for C, N and S analysis by flash combustion, and O and H analysis by high temperature conversion</li></ul><h4>Connectivity with Thermo Scientific™ IRMS Portfolio</h4>The Flash EA Series connected to the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2232">DELTA Q IRMS</a> provides precise and sensitive measurement of the isotope fingerprints - C, N, S, O and H isotopes - a unique chemical signature of samples. This helps you gain unique insights into food history and origin, as well as environmental pollutants, forensics and geosciences.<figure class="image"><img style="aspect-ratio:650/552;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_EA_Iso_Link_IRMS_System_2_01d3ed421c.jpg" alt="Thermo Scientific™ EA IsoLink™ IRMS System" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_EA_Iso_Link_IRMS_System_2_01d3ed421c.jpg 184w," sizes="100vw" width="650" height="552"></figure><h3>More automation. More scalability. All in a single platform.</h3>Delivering proven performance with unprecedented robustness and ease of use, the EA IsoLink IRMS Platform can help your lab drive efficiency, improve cost-effectiveness, and minimize training for new operators.<h4>Low cost per sample for reduced operational costs</h4>Less helium consumption: Helium consumption is reduced by more than 60% for NCS and NC sample analysis, and reduced by more than 30% for OH sample analysis (compared with previous systems).Less replication: Because the EA IsoLink IRMS System measures high and low concentrations in the same sample (wide dynamic range), it reduces the need for replicate analysis (e.g., high carbon and low sulfur, such as in food authenticity or ecology applications).High throughput: Fast analysis provides high sample throughput, resulting in lower cost per sample.<h4>High sensitivity driven by chromatography - even for the smallest sample size</h4>Temperature-ramped GC: Equipped with a temperature-ramped GC feature, the EA IsoLink System gives your lab the highest performance on small sample sizes through optimal baseline separation of analyte gases and sharp peak shapes.Performance synergies: The combination of in-line flash combustion technology and temperature-ramped GC separation significantly improves the performance for all your EA-IRMS applications.<h4>System modularity for future-proof investment</h4>The EA IsoLink IRMS System’s modular design provides the highest flexibility for all applications - enabling you to adapt and scale to new analyses in the future. Through smart upgrade paths, you can easily modify the system to increase performance and productivity as your needs grow over time. Boost your CN system with an S upgrade or add CNS to your OH isotope fingerprints.Thermo Scientific™ MAS Plus Autosampler provides a 125-position helium-purged sample chamber, low blank autosampler for CNS and OH analysis.Thermo Scientific™ AS 1610 Liquid Autosampler offers a versatile solution for injecting liquid samples.Macro reactors enable CNS Analysis of large sample sizes (greater than 60 mg) and higher throughput on standard sample sizes to mg range.<h4>Added flexibility with flash EA series</h4>The flexibility of the Flash EA Series helps you meet growing analytical needs in IRMS and Organic Elemental Analysis (OEA).The FlashSmart Elemental Analyzer for OEA delivers accuracy and precision with internationally recognized certifications. Its straightforward modular design offers a variety of optimized application configurations, including CHN, CHNS, S, N/Protein, CN, CNS, CHNS/O and more. High throughput with 24/7 operation, low cost per sample and optimized helium consumption are all driven by our fully automated dedicated OEA software, Thermo Scientific™ EagerSmart™ Data Handling Software, which can grow with your analytical needs without need for an upgrade.<h4>Smart automation for ease of use</h4>Because of its intelligent software and intuitive design, the EA IsoLink Platform allows operators to leverage familiar technology for higher productivity.Software Platform: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">The Thermo Scientific™ Qtegra™ Intelligent Scientific Data Solution </a>(ISDS) Software provides seamless control and automation for unattended operation and improved productivity. Regardless of operator skills or the final application, the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">Qtegra ISDS Software</a> offers logical, streamlined interface allowing straight forward measurement set-up through analytical Workflows. The software includes auto-stop, standby modes, and other features to minimize intervention. It also allows for integrated data evaluation strategies, customized reports and method development. All of the auto-diagnostics ensure important aspects of the instrument are monitored, maximizing uptime.Thermo Scientific™ smartEA option: This option allows you to focus on your research by combining ease-of-use and unattended analysis to deliver high-precision results. The smartEA option uses the analyzer’s Thermal Conductivity Detector (TCD) trace to define the required sample dilutions in the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2231">ConFlo IV Universal Interface</a>. The straightforward automated workflow allows you to analyze very small amounts, such as nitrogen and sulfur, along with highly abundant elements, such as carbon - all from the same sample.<h3>Addressing a world of applications</h3>For origin and authenticity questions, the EA IsoLink IRMS Platform provides precise and sensitive measurement of the isotope fingerprints - C, N, S, O and H isotopes - a unique chemical signature of samples, helping you gain unique insights into their history and origin.<h4>Food authenticity and origin</h4>Is the label declaration on my food correct?From fruits and vegetables, to wine, honey and coffee, the EA IsoLink IRMS Platform provides isotopic fingerprints ideally suited to determining food integrity.<ul><li>Food adulteration</li><li>Food and beverage origin</li><li>Agronomy</li></ul><h4>Environmental</h4>What is the source of pollution in the soil, water or air?An assessment of individual organic pollutants particles in air contamination (e.g. PM2.5) will be traced with C, N, and S isotope fingerprints.<ul><li>Marine science</li><li>Ecology and biology</li><li>Petroleum and exploration</li></ul><h4>Geosciences</h4>What was the weather like thousands of years ago?By analyzing materials such as sediments, ice cores and speleothems, researchers can understand epochal changes in vegetation, rainfall patterns and temperature.<ul><li>Soil science</li><li>Palaeoclimatology research</li></ul><h4>Forensics</h4>How can we investigate provenance and dietary preferences?From tracing explosives, illegal drugs, counterfeit currency, animal tissues such as ivory, dietary preferences and crime scene evidence, forensic investigations based on isotope fingerprints examine samples’ origin.<ul><li>Archaeology</li><li>Provenance</li></ul><h3>Connectivity for origin and authenticity</h3>Your lab can focus on isotopic investigations by taking advantage of having one partner and one platform for your elemental and isotope analysis. Thanks to the connectivity of the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2232">DELTA Q IRMS</a> and the connecting peripherals that are fully controlled by the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">Qtegra ISDS Software</a>, you can also leverage the high throughput, unattended operation and flexibility for demanding analysis, regardless of the applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_EA_Iso_Link_IRMS_System_2_dcb8a3d338.jpg" alt="Thermo Scientific™ EA IsoLink™ IRMS System " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_EA_Iso_Link_IRMS_System_2_dcb8a3d338.jpg 245w," sizes="100vw" width="1464" height="933">

Thermo Scientific Element GD Plus GD-MS

For high throughput and extra low ppb level detection limits, the Element GD Plus GD-MS is the most convenient and powerful tool for bulk metal analysis and depth profiling in routine and research applications.

Redefine the analysis of advanced high purity materials directly in solid state with the Thermo Scientific™ Element GD Plus™ GD-MS. For high throughput and extra low ppb level detection limits, the Element GD Plus GD-MS is the most convenient and powerful tool for bulk metal analysis and depth profiling in routine and research applications.The Element GD Plus GD-MS enables analysis of nearly all elements in the periodic table from both conductive and non-conductive materials with the same level of sensitivity and data quality. Analysis of low melting point metals such as gallium are made easy with a dedicated workflow for sample preparation and analysis. This makes GD-MS the reliable standard for any metal analysis.Almost all elements present in a solid sample can be detected and quantified routinely: many down to the parts per billion (ppb) level.<h3>High productivity and low cost of analysis</h3>The Element GD Plus GD-MS is designed to deliver outstanding sensitivity and accuracy at a high sample throughput, dramatically lowering the cost of your analysis.<ul><li>Fast-flow ion source</li><li>User-friendly source design: &lt; 1 min sample exchange</li><li>Short pumping times: &lt; 10 min sample turnaround</li><li>High sample throughput: up to 5 samples/hr</li><li>Less sample preparation: no requirement for acid cleaning of high-purity samples</li><li>Faster sample analysis: no requirement to measure calibration standards</li></ul><h3>Routine operation</h3>The Element GD Plus GD-MS is designed with routine operation and high throughput at its core.<ul><li>Linear dynamic range spanning more than 12 orders of magnitude allows the simultaneous analysis of matrix elements (%), traces (ppm), and ultra-traces (ppb)</li><li>Automatic cross-calibration between different detection modes ensures robust results</li><li>Sample vacuum chamber: eliminates risk of leakage between the sample and the GD cell</li><li>Determine elemental concentrations rapidly within a single scan without calibration standards (using standard RSF approach)</li><li>Best precision within a short analysis time</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Element_GD_Plus_GD_MS_2_f0a37ee3f3.jpg" alt="Thermo Scientific™ Element GD Plus™ GD-MS: Ion Beam Ratio RSD for 10 min measurements of elements at 1000 ppm, 100 ppm and 1 ppm. Data shown for 18 different instruments." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Element_GD_Plus_GD_MS_2_f0a37ee3f3.jpg 152w," sizes="100vw" width="906" height="931"><h3>Outstanding limits of detection</h3>The Element GD Plus GD-MS delivers high throughput without compromise. With the highest signal-to-noise ratio and lowest limits of detection, the Element GD Plus GD-MS is the workhorse for ultra-high purity elemental analysis.<ul><li>Unique ion source designed for high ion transmission, maximizing the signal analyzed.</li><li>Guaranteed signal-to-noise ratio produces the sub-ppb limits of detection</li><li>Optional CNO option achieves sub-ppm level limits of detection for CNO with no compromise to the through-put of your analysis</li><li>Factor 10 reduction of polyatomic interferences compared to static GD sources</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Element_GD_Plus_GD_MS_3_a73bdae066.jpg" alt="Thermo Scientific™ Element GD Plus™ GD-MS: Typical mass spectrum of 42Ca and 45Sc during the analysis of high purity Ti. (Left) ASTM F1710-08 method using static source. (Right) Fast-flow method using the Element GD Plus GD-MS. Overlapping isobaric interference from 48Ti36Ar2+ and 50Ti40Ar2+ is suppressed by the fast flow source." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Element_GD_Plus_GD_MS_3_a73bdae066.jpg 166w," sizes="100vw" width="921" height="867"><h3>Trust in results by high mass resolution</h3>The simplicity of high-resolution ICP-MS allows the most advanced performance, without compromising on straightforward and reliable method development.<ul><li>Interference-free measurements for indisputable analytical results</li><li>Any combination of resolution settings can be performed within a single analysis</li><li>Fixed-slit design guarantees maximum stability and reproducibility</li><li>Minimum contribution of high matrix signals on neighboring analyte peaks due to filter lens</li></ul><h3>Depth profiling with nanometer resolution</h3>Depth profiling is an important tool for elemental analysis of coatings and the assessment of element diffusion across layers.<ul><li>Depth resolution from nanometers to hundreds of micrometers</li><li>Determining concentrations of all elements from sub-ppm to 100% without the need for calibration</li><li>Flexible anode diameter for advanced depth profiling a</li><li>Sputter rates can be adjusted for bulk analysis or depth profiling</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Element_GD_Plus_GD_MS_289a3c7919.jpg" alt="Thermo Scientific™ Element GD Plus™ GD-MS: Typical crater shape of a depth profile on a copper sample." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Element_GD_Plus_GD_MS_289a3c7919.jpg 245w," sizes="100vw" width="1191" height="388"><h3>Recommended for</h3><ul><li>Aerospace: nickel superalloys, composite materials, depth profiling of coatings and diffusion layers</li><li>Microelectronics: copper, alumina powder, sputter targets</li><li>Renewable energy: silicon blocks, wafers, solar cells</li><li>Medical/pharmaceutical/food: stainless steel, alloys</li></ul><h3>Specifications</h3><ul><li>Type: GS Mass Spectrometer</li><li>Dynamic Range: &gt;10¹² Linear with Automatic Cross Calibration</li><li>Mass Resolution: 3 Fixed Resolutions: ≥300, ≥ 4,000, ≥ 10,000</li><li>Mass Stability: 25 ppm/8 hour</li><li>Power: 3-Phase, 230/400 V ± 10%, 50/60 Hz Fused 32 A / Phase</li><li>Sensitivity: &gt;1 x 10¹⁰ Cps (1.6 x 10⁻⁹ A) for Copper Peak (Peak Height, Total Ion Current) in Medium Resolution</li><li>Unit Size: Each</li></ul>

Thermo Scientific™ GS Omni Analyzer

Thermo Scientific GS Omni uses PGNAA to provide continuous, calibration-free elemental analysis of process streams. Designed for demanding industrial slurry applications.

The Thermo Scientific™ GS Omni Light Element Analyzer provides robust, accurate elemental analysis for multiple process streams, delivering real-time information for the optimization of slurry beneficiation processes such as froth flotation. Utilizing industry-leading Prompt Gamma Neutron Activation Analysis (PGNAA) technology, it measures both heavy and light elements, crucially covering the Z&lt;20 elements – calcium and lighter – that are less well-suited to X-Ray Fluorescence (XRF) analysis. Together, Thermo Scientific PGNAA and XRF analyzers allow customers to measure the broadest possible range of elements.Since the PGNAA signal is unaffected by particle size, ore matrix or inter-element interference, the GS Omni requires no recalibration as the ore changes, enabling robust measurement with minimal cost and ongoing effort. Easily configured for between two and eight process streams, it provides data that you can confidently rely on. Use the GS Omni to control contaminant elements, improve product quality, increase recovery, and lower production costs.The GS Omni offers near metallurgical quality analysis for up to eight process streams, depending on concentration, elements of interest, required cycle analysis time, plant layout, and process control considerations.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GS_Omni_Analyzer_927ddc6cd4.jpg" alt="Thermo Scientific™ GS Omni Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GS_Omni_Analyzer_927ddc6cd4.jpg 237w," sizes="100vw" width="650" height="427"><h3>🔑 Key features include:</h3><ul><li>Capability to measure light elements such as calcium, chlorine, sulfur, aluminum, silicon, magnesium, and sodium, for industrially relevant analysis over an extended range of elements relative to XRF.</li><li>Unaffected by matrix effects and particle size – unlike XRF – for robust measurements in the face of process changes and ore variability with no requirement for recalibration.</li><li>Scintillation detectors eliminate the need for cooling apparatus, enabling simpler set-up and operation with no requirement for chillers or special environmental control.</li><li>Modular multiplexer, for expansion from 2 to 8 streams.</li><li>Holding tank and sample recirculation through the measurement zone provide deaeration, which along with multiple passes through PGNAA source delivers more accurate measurement for slurry streams.</li><li>Factory calibrated for slurry applications with only infrequent site checks required, enabling minimal manual input and low maintenance.</li></ul>

Thermo Scientific™ FLASH 2000 CHNS/O Analyzers

The FLASH 2000 CHNS/O analyzer combines simplicity, precision, and low operating costs. Offers up to 12 configurations for a broad range of applications across science and industry.

<div><div>Decades of experience combined with our constant innovation in developing organic elemental analyzers (OEAs) contributed to the design of the Thermo Scientific™ FLASH 2000 CHNS/O Analyzers. This system delivers the ultimate in simplicity, precision, and cost effectiveness for any laboratory requiring the quantification of carbon, hydrogen, nitrogen, sulfur, and oxygen.Providing a reliable, high-speed, accurate 24/7 analytical solution to a range of industries, this series of flexible, configurable analyzers uses a globally recognized technique endorsed by official organizations worldwide.</div><div><h3>An Elemental Analysis Solution for a Range of Industries</h3>With an extraordinary range of applications, the modular design of the FLASH 2000 Series OEAs enables 12 configurations tailored to the fields of application they serve.<ul><li>Organic or inorganic chemistry and pharmaceuticals</li><li>Petrochemistry and energy</li><li>Environmental analysis</li><li>Material characterization</li><li>Agronomy and marine science</li><li>Food industry</li><li>Human and animal samples</li><li>Isotope analysis</li><li>Academic</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_FLASH_2000_CHNS_O_Analyzers_3139f1b44b.jpg" alt="Thermo Scientific™ FLASH 2000 CHNS/O Analyzers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_FLASH_2000_CHNS_O_Analyzers_3139f1b44b.jpg 149w," sizes="100vw" width="650" height="680"><h3>Gain Cost Efficiency and Improve Productivity</h3>The simplicity of the OEA method combined with unparalleled data reproducibility and truly quantitative results are the essence of the sophisticated package of benefits offered by the FLASH 2000 Series OEA instruments.<ul><li>Wide analytical range, enabling extensive applications</li><li>Versatility and modularity, ensuring that performance meets users' requirements no matter how often those requirements change</li><li>Accuracy and precision due to the integrated mass flow controller, which enables high stability to deliver precise, accurate results in all sample types and concentrations</li><li>Ease of use as a result of the unique automated functions, reducing the demands on operators</li><li>Simplified operation with Thermo Scientific™ Eager Xperience™ software, which minimizes user involvement in set-up</li><li>Compatibility and automation no matter how high your throughput requirement, with a range of autosamplers that ensures efficient analysis</li><li>Comprehensive and user-friendly software, a useful and powerful tool tailored for every lab requirement</li><li>Ground-breaking OEA CookBook (4th edition), which provides a wealth of analysis tips to get optimal results every time</li></ul></div></div>

Thermo Scientific™ FLASH 2000 N/Protein Analyzers

The FLASH 2000 N/Protein analyzer delivers accurate nitrogen and protein determination in all foods and beverages, operating 24/7 with both solid and liquid samples.

<div><div><h4>Determine Nitrogen concentration and the relative protein content in every type of food and beverage.</h4>The Thermo Scientific™ FLASH 2000 N/Protein analyzer is an essential tool for both Quality Control and Research/Development laboratories in the food industry, which require precise and accurate determinations, limited cost per analysis, and a 24 hour hard worker able to analyze solid and liquid samples continuously.Providing a reliable, high-speed, accurate 24/7 analytical solution to a range of industries, this series of flexible, configurable analyzers uses a globally recognized technique endorsed by official organizations worldwide.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_FLASH_2000_CHNS_O_Analyzers_3139f1b44b.jpg" alt="Thermo Scientific™ FLASH 2000 N/Protein Analyzers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_FLASH_2000_CHNS_O_Analyzers_3139f1b44b.jpg 149w," sizes="100vw" width="650" height="680"><h3>An Elemental Analysis Solution for a Range of Industries</h3>With an extraordinary range of applications, the modular design of the FLASH 2000 Series OEAs enables 12 configurations tailored to the fields of application they serve.<ul><li>Organic or inorganic chemistry and pharmaceuticals</li><li>Petrochemistry and energy</li><li>Environmental analysis</li><li>Material characterization</li><li>Agronomy and marine science</li><li>Food industry</li><li>Human and animal samples</li><li>Isotope analysis</li><li>Academic</li></ul><h3>Gain Cost Efficiency and Improve Productivity</h3>The simplicity of the OEA method combined with unparalleled data reproducibility and truly quantitative results are the essence of the sophisticated package of benefits offered by the FLASH 2000 Series OEA instruments.<ul><li>Wide analytical range, enabling extensive applications</li><li>Versatility and modularity, ensuring that performance meets users' requirements no matter how often those requirements change</li><li>Accuracy and precision due to the integrated mass flow controller, which enables high stability to deliver precise, accurate results in all sample types and concentrations</li><li>Ease of use as a result of the unique automated functions, reducing the demands on operators</li><li>Simplified operation with Thermo Scientific™ Eager Xperience™ software, which minimizes user involvement in set-up</li><li>Compatibility and automation no matter how high your throughput requirement, with a range of autosamplers that ensures efficient analysis</li><li>Comprehensive and user-friendly software, a useful and powerful tool tailored for every lab requirement</li><li>Ground-breaking OEA CookBook (4th edition), which provides a wealth of analysis tips to get optimal results every time</li></ul></div></div>

Thermo Scientific Triton Series Multicollector Thermal Ionization Mass Spectrometer (TIMS)

High-precision multicollector TIMS for demanding isotope ratio analysis, delivering exceptional sensitivity, stability, and accuracy for ultra-small and low-abundance samples.

The Thermo Scientific™ Triton™ Series Multicollector Thermal Ionization Mass Spectrometer (TIMS) is a high-precision platform designed for the most demanding isotope ratio measurements. Built on more than two decades of continuous development, the Triton Series combines field-proven TIMS performance with state-of-the-art detection and ion-optical technologies to deliver exceptional accuracy, stability, and sensitivity—especially for small samples and low-abundance isotopes.At the heart of the Triton Series is a high-stability thermal ionization source, optimized for maximum ion transmission and minimal kinetic energy spread. This ensures highly reproducible ion beams for both single- and double-filament techniques, enabling precise isotope ratio analysis across a wide range of elements and applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Triton_Series_Multicollector_Thermal_Ionization_Mass_Spectrometer_TIMS_2_e9fa5e958e.jpg" alt="Thermo Scientific Triton Series Multicollector Thermal Ionization Mass Spectrometer (TIMS)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Triton_Series_Multicollector_Thermal_Ionization_Mass_Spectrometer_TIMS_2_e9fa5e958e.jpg 182w," sizes="100vw" width="650" height="558"><h3>Advanced detection and ion optics</h3>The Triton Series integrates multiple complementary detector technologies to address diverse analytical challenges:<ul><li>10¹³ Ω Amplifier Technology extends the lower detection limits, delivering faster response times, extremely low noise, and significantly improved internal precision for small ion beams.</li><li>Retarding Potential Quadrupole (RPQ) lenses provide exceptional abundance sensitivity by suppressing scattered ions and mass tailing, enabling accurate quantification of minor isotopes even next to intense ion beams.</li><li>Multi Ion Counting (MIC) packages allow simultaneous detection of the lowest-intensity ion beams using SEM and CDD ion counters, with flexible configurations tailored to nuclear, geochronological, and geochemical applications.</li><li>Stable, linear SEM and CDD ion counters ensure reliable measurements for ultra-low sample amounts and rare isotopes.</li><li>High-performance Faraday cups guarantee uniform response, long operational lifetime, and excellent linearity for high-precision static and dynamic measurements.</li><li>Movable multicollector array supports up to nine Faraday cups with precise alignment over a wide mass range, extendable to static Ca and Li isotope measurements.</li><li>Virtual amplifier technology enables cancellation of gain factor uncertainties through amplifier rotation, achieving low-ppm external reproducibility in efficient static measurement modes.</li></ul><h3>Designed for the most demanding isotope ratio applications</h3>The Triton Series is ideally suited for applications where ultimate precision and high abundance sensitivity are essential, including:<ul><li>Radiogenic and stable isotope geochemistry</li><li>Geochronology (U–Pb, Pb–Pb, Rb–Sr, Sm–Nd, Lu–Hf systems)</li><li>Nuclear safeguards and nuclear forensic isotope analysis</li><li>Environmental and cosmochemical research</li><li>Analysis of ultra-small sample amounts and isotopically scarce materials</li></ul>Available in configurations such as Triton XT and Triton Plus, tailored to different performance priorities within high-precision isotope ratio analysis, the Thermo Scientific Triton Series TIMS offers a flexible, future-proof solution that continues to set the benchmark for thermal ionization mass spectrometry.

Thermo Scientific ConFlo IV Universal Continuous Flow Interface

Universal continuous flow interface for IRMS enabling automated multi-device control, higher throughput, lower costs, and stable, unattended isotope analysis.

Thermo Scientific™ ConFlo IV Universal Continuous Flow Interface is a versatile continuous flow interface designed to significantly expand the application range of stable isotope laboratories using isotope ratio mass spectrometry (IRMS). The ConFlo IV system enables seamless connection of multiple sample preparation devices, delivering fully automated, stable, and highly reproducible measurements.The system features intelligent management of all required reference gases, automatic sample-size recognition, precise matching of sample and reference signals, and advanced self-diagnostics. These capabilities reduce operator involvement, lower operating costs, and increase overall laboratory throughput.<h3>Key features</h3><ul><li>Management of multiple devices Automated switching between different sample preparation units, including activation, deactivation, and reference gas changes, maximizes IRMS utilization.</li><li>Continuous, unattended operation Application switching can occur at any time without operator intervention; preparation devices can be regenerated and reloaded while other analyses are running.</li><li>Maximized performance and efficiency Using reference gases instead of bulk reference materials reduces operating costs by nearly 50 % while increasing sample throughput by almost 50 %.</li><li>Enhanced accuracy and stability Automatic adjustment of reference gas pulse intensities equalizes conditions between sample and reference gases, improving precision and long-term reliability.</li><li>Advanced data quality control Critical system parameters affecting data quality are automatically monitored across all sample sequences.</li><li>Single-interface control All connected preparation and inlet devices are controlled through one interface, with the ability to add new samples or entirely new applications without interrupting ongoing data acquisition.</li></ul>

Thermo Scientific DELTA Q Isotope Ratio Mass Spectrometer

High-performance IRMS combining exceptional sensitivity, robust design, and intuitive Qtegra ISDS software for food authenticity, environmental, forensic, and research isotope applications.

The Thermo Scientific™ DELTA™ Q Isotope Ratio Mass Spectrometer (IRMS) represents a new evolutionary step in isotope ratio analysis, combining outstanding analytical performance with intuitive operation powered by <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">Qtegra™ Intelligent Scientific Data Solution (ISDS)</a> software.&nbsp;The DELTA Q IRMS is designed for seamless integration with a wide range of Thermo Scientific peripherals, making it a highly flexible platform for applications such as food authenticity testing, environmental and forensic analysis, doping control, and advanced scientific research.<h4>Outstanding sensitivity</h4><ul><li>Sensitivities of up to 800 molecules per CO₂ ion in dual-inlet mode and 1,000 molecules per ion in continuous-flow mode.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DELTA_Q_Isotope_Ratio_Mass_Spectrometer_2_671e47510f.jpg" alt="Thermo Scientific DELTA Q Isotope Ratio Mass Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DELTA_Q_Isotope_Ratio_Mass_Spectrometer_2_671e47510f.jpg 197w," sizes="100vw" width="650" height="517"><h4>Versatility for diverse applications</h4><ul><li>Support for up to 10 collectors in multiple configurations, covering all IRMS applications up to m/z 96.</li><li>Simultaneous mass range up to ±25%, enabling efficient multi-isotope measurements.</li><li>Compatibility with preconcentrators, elemental analyzers, GC interfaces, LC interfaces, and continuous-flow inlets.</li><li>On-line H₂ capability for hydrogen isotope analysis.</li></ul><h4>Highly robust and reliable design</h4><ul><li>A monolithic analyzer with fixed alignment of all ion-optical components, including the electromagnet, ensuring exceptional long-term stability and robustness.</li><li>Integrated signal amplifiers and digitizers minimize external connections and increase reliability.</li><li>Fixed-position ion optics eliminate the need for realignment during installation or routine maintenance.</li><li>Optimized pumping strategy enables single-stage turbo pumping for all standard continuous-flow applications.</li><li>Comprehensive, automated diagnostics driven by Qtegra ISDS software support continuous performance monitoring.</li></ul><h4>Compact and user-friendly design</h4><ul><li>Compact footprint requiring minimal laboratory space.</li><li>Dedicated space for online peripherals on top of the instrument.</li><li>Dual inlet, µ-volume, and multiport interfaces are neatly integrated inside the system.</li><li>Continuous-flow interfaces can be fully controlled from the front panel.</li><li>All pumps are located internally, reducing noise and laboratory clutter.</li></ul><h4>Qtegra™ ISDS Software</h4><ul><li>Significantly increases laboratory productivity with automatic Get Ready functionality, ready-to-use templates, and built-in quality control tools.</li><li>Intelligent, optimized workflows guide users from sample to result while allowing flexible switching between system configurations.</li><li>Ensures full data integrity and traceability for raw data, metadata, and reported results.</li></ul><h4>ACT label certification</h4>The DELTA Q IRMS is certified with the ACT Environmental Impact Label from My Green Lab, providing transparent, third-party verified information on environmental impact across manufacturing, energy and water use, packaging, and end-of-life considerations—supporting sustainable laboratory procurement and reduced carbon footprint.

Products focused on Elemental Analysis from Thermo Fisher Scientific - page 1

Related content

CATRIN researchers offer a “greener” way to make supercapacitors

News from LabRulezICPMS Library - Week 11, 2026

Basic instructions for participants in a proficiency testing scheme