Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 23rd March 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by LECO, Shimadzu and Waters Corporation and brochure by Thermo Fisher Scientific!<h3>1. LECO: Determination of Nitrogen in Fertilizer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/CN_FP_928_NITROGEN_FERTILIZERS_203_821_615_4d4b013a08.pdf">Full PDF for download</a></li></ul>Nitrogen is one of the most important elements for plant development and is the macronutrient that is most often found to be deficient in arable soils used for crop production. Nitrogen plays a key role in the formation of enzymes and proteins, which promotes lush, vigorous growth and development in plants that often leads to an increase in the yield from the plant. Fertilizers are utilized to re-introduce nitrogen back into arable soils. Fertilizers can be grouped by their makeup and/or origins into categories including inorganic and/or synthetic (including nitrates, ammonium, and urea) and organic (including compost materials and manures). The accurate and precise determination of nitrogen in all fertilizer types is not only important in the process of blending and preparing the fertilizer material for use, but also will have significant impact on the commercial value and guarantee of the fertilizer.&nbsp;The CN928/FP928 is a macro combustion carbon and nitrogen/protein determinator that utilizes a pure oxygen environment in a high-temperature horizontal ceramic combustion furnace designed to handle macro sample mass. A thermoelectric cooler removes moisture from the combustion gases before they are collected in a ballast. The gases equilibrate and mix in the ballast before a representative aliquot (3 cm3 or 10 cm3 volume) of the gas is extracted and introduced into a flowing stream of inert gas (helium or argon) for analysis. The aliquot gas is carried to a thermal conductivity cell (TC) for the detection of nitrogen (N2).<h4>Instrument Model and Configuration&nbsp;</h4>Thermal conductivity detectors work by detecting changes in the thermal conductivity of the analyte gas compared to the constant thermal conductivity of the reference/carrier gas. The greater the difference between the thermal conductivity of the carrier gas and the analyte gas, the greater the sensitivity of the detector. The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=24&amp;search=CN928">CN928</a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=24&amp;search=FP928">FP928</a> supports either the use of helium or argon as the instrument's carrier gas. When used as a carrier gas, helium provides the highest sensitivity, and the best performance at the lower limit of the nitrogen range. The thermal conductivity difference between argon and nitrogen is not as great as the thermal conductivity difference between helium and nitrogen, therefore the detector is inherently less sensitive when using argon as a carrier gas.<h4>TYPICAL RESULTS&nbsp;</h4>Data was generated utilizing a single standard, forced through origin calibration using ~ 0.1 g of NIST 913b Uric Acid (33.23% N). Alternatively, LECO 503-530 LCRM Urea may be used for calibration.<h3>2. Shimadzu: Evaluation of Microscopic Foreign Matter in Recycled Plastics Using Dynamic Image Analysis, Infrared Microscopy, and SEM-EDS</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00861_en_7485baba21.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>&nbsp;It is easy to evaluate the size and quantity of microscopic foreign particles, which are key quality criteria of recycled plastics.</li><li>With the microcell method of DIA, microscopic foreign matter can be detected and counted quickly using a small sample quantity.</li><li>Infrared microscope and SEM-EDS systems provide information about the morphology and composition of microscopic foreign matter that is useful for improving recycling processes.</li></ul>One of the quality criteria for recycled plastic flakes and pellets is the content of foreign matter. Quantitatively evaluating the size and quantity of foreign particles contained in flakes and pellets is important for examining foreign matter removal processes intended to improve pellet quality and optimize manufacturing processesfor products made with recycled materials.&nbsp;In this article, pellets of virgin and recycled polyethylene terephthalate (hereafter PET) were dissolved in hexafluoro-2-propanol (hereafter HFIP), a solvent for dissolving PET, to prepare suspensions of insoluble microscopic foreign particles. These suspensions were measured with a dynamic particle image analysis (DIA) system (<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=iSpect+DIA-10">iSpect DIA-10</a>) to evaluate the size and number of insoluble microscopic foreign particles (patent pending). In addition, part of the suspensions were diluted tenfold and filtered through a membrane filter to collect the insoluble microscopic foreign particles on the filter. The morphology and composition of the collected microscopic foreign particles were evaluated using a digital microscope, an infrared microscope system (<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=IRTracer-100">IRTracer-100</a> and <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=AIM-9000">AIM-9000</a>), and an SEM-EDS system. These evaluations enabled comparison of the sizes, quantities, and types of foreign particles contained in virgin and recycled materials.<h4>Conclusion&nbsp;</h4>By using an iSpect DIA-10 system to measure suspensions prepared by dissolving two types of PET pellets (virgin and recycled) in HFIP, we obtained particle images of insoluble foreign matter and evaluated size and concentration of particles. That enabled quantitative comparison of particle size and count in microscopic foreign matter contained in virgin and recycled materials.&nbsp;In addition, after diluting the pellet suspensions, the insoluble microscopic foreign matter in the diluted suspensions was collected on filters. The morphology and composition of the microscopic foreign matter were evaluated using an infrared microscope and SEM-EDS system. The results indicated that the suspensions contained organic substances, such as cellulose and amide-based compounds, and inorganic substances and metals that contain elements such as C, O, Ca, and Al (suggestive of carbonates and metallic aluminum).&nbsp;Thus, the iSpect DIA-10 enables simple quantitative evaluation of the size and number of microscopic foreign particles in PET pellets using only small sample quantities. Furthermore, composition evaluation by infrared microscope and SEM-EDS systems provides useful information for investigating the origin of foreign matter, examining measures to reduce foreign matter, and evaluating impacts on final products. If similarities in size and shape are observed, particle images obtained with iSpect DIA-10 can also potentially be used to estimate particle composition.<h3>3. Thermo Fisher Scientific: Ensuring safer and effective pharmaceutical formulations by X-ray diffraction</h3><ul><li>Brochures and specifications</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/PF_41381_xrd_solutions_pharma_9b89684165.pdf">Full PDF for download</a></li></ul>From drug discovery and preformulation studies to the efficient scaling up in the manufacturing process in the plant and finally through QA/QC validation, X-ray diffraction (XRD) is a vital analysis method in the characterization of different physico-chemical properties of the active pharmaceutical ingredient (API). XRD is a gold standard method and required technique in the determination of polymorphic and salt screening, % of crystallinity and stability/reactivity studies of the final API.&nbsp;<h5><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2297">Thermo Scientific™ SolstiX™ XRD Software</a> with Security Suite extends ARL EQUINOX 100 X-ray Diffractometers to 21 CFR Part 11 regulated labs&nbsp;</h5><ul><li>Protect stored electronic data related to quality assurance within manufacturer’s computer systems&nbsp;</li><li>Put controls in place to keep records authentic, incorruptible, and confidential&nbsp;</li><li>Electronic signatures for the user to take responsibility for the electronic data in the system&nbsp;</li><li>Requirements in the data record: date and time of scan, name of the unique signer, and technological controls to ensure security (e.g. passwords)&nbsp;</li></ul><h5><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2143">Thermo Scientific™ ARL™ EQUINOX 100 X-ray benchtop diffractometer</a> is designed to exceed your analytical needs&nbsp;</h5><ul><li>Ideally suited for rapid screening of various formulations, finger printing or detection of counterfeit products&nbsp;</li><li>Polymorphism and crystallinity determination, crystallite size calculation, quantitative phase analysis, reactivity and stability of materials, etc.&nbsp;</li><li>XRD experiments on standard powders, bulks, tablets, small quantities, etc.&nbsp;</li><li>Real-time full pattern XRD based on our unique PSD detector technology&nbsp;</li><li>X-ray source based on micro-source technology with no external water cooling</li><li>Unique dual-mode capability: reflection and/or transmission&nbsp;</li></ul><h5>Thermo Scientific™ ARL™ EQUINOX 100 XRD for structural analysis&nbsp;</h5><ul><li>Easy-to-use simultaneous full pattern XRD based on unique real time PSD detector technology&nbsp;</li><li>Unique dual-mode capability on a benchtop XRD instrument: reflection and/or transmission mode&nbsp;</li><li>XRD experiments on various samples with sample spinner, capillary stage, sample changer or in controlled environment</li></ul><h5>Top XRD benefits for pharma&nbsp;</h5><ul><li>Structural characterization technique&nbsp;</li><li>Nondestructive technique&nbsp;</li><li>Small amount of sample needed for analysis&nbsp;</li><li>Unique diffraction patterns and quick response&nbsp;</li><li>Analysis on mixtures as well as amorphous content&nbsp;</li><li>Easy determination of induced structural changes</li></ul><h3>4. Waters Corporation: SIMI: A Different Approach to Revealing Dangerous Subvisible Impurities</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009094_en_fb955e89ec.pdf">Full PDF for download</a></li></ul>Foreign particulate matter, also known as extrinsic particles, has become a serious threat to patient safety in recent years, with cases linked to severe immunogenic reactions, deaths, and costly recalls.1 In 2021 alone, Takeda recalled 1.6 million doses of the Moderna COVID-19 mRNA vaccine in Japan after several patient deaths were linked to steel particulates shed from a malfunctioning pump.2 Over the span of seven years, from 2014–2017, there were more than 110 drug recalls as a result of glass delamination,3–4 and several more due to remnant crystals,5 owing to the difficulty of identifying the presence and source of foreign particulate matter. To prevent against such threats, manufacturers require high throughput technologies to better identify foreign particulate matter in real time.<h4>Results and Discussion</h4><h5>Shining a Light on Extrinsic Particles with SIMI</h5>Side illumination membrane imaging (SIMI) is a proprietary illumination, imaging, and analysis technique exclusively available to <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2190">Aura instruments</a>. Utilizing the principles of darkfield microscopy,6 SIMI is conducted on an Aura membrane plate using an oblique illumination source which emits light at an angle parallel to the surface of the plate.&nbsp;Compared to backgrounded membrane imaging (BMI), which utilizes brightfield microscopy (epi-illumination) where particles scatter the incident light isotropically (i.e., at all angles), side illumination membrane maging (SIMI) is a technique that is specifically designed to detect light scattering from high refractive index particles, as well as those that protrude out of the plane from the membrane surface. A particle’s average SIMI intensity is measured in a relative scale where the inherent SIMI scattering of the membrane is defined as SIMI = 0. Positive SIMI values indicate particles protruding out of the membrane, as is the case with microplastics, fibers, and other common extrinsic particles, whose average SIMI intensities vary from 0–255. On some occasions, like with metallic particles and absorbing oils, particles will have reduced light refraction relative to the membrane and thus display negative SIMI values, varying from 0 to -122.&nbsp;The majority of foreign, extrinsic particles exhibit a high refractive index and are mechanically rigid in structure, causing them to protrude from the membrane surface and scatter side illumination to a high degree, ideal for SIMI analysis. In contrast, biologic particles exhibit the opposite properties—low refractive index and malleable structures, causing them to lie flat with minimal side scatter profiles, which is best analyzed with BMI or fluorescence membrane microscopy (FMM). Utilizing all three microscopy approaches is most ideal to facilitate the determination of all extrinsic (non-biologic) and inherent (biologic) particles in biologic formulations.<h4>Conclusion&nbsp;</h4>SIMI is a unique approach to providing additional characterization of subvisible particles and is available in all Aura models to help rapidly identify foreign material in biological samples with a high degree of specificity. A key tertiary imaging mode in addition to BMI and FMM, SIMI provides selective, orthogonal morphological information to identify tall and rigid materials, a defining feature of most extrinsic particles (Figure 11). While particle sizing and counting is done via BMI, SIMI provides illumination, imaging, and analysis that can be useful across a variety of biological products to reveal foreign subvisible particles from the earliest to the latest of stages in the bioprocess.

News from LabRulezICPMS Library - Week 13, 2026

<ul><li>Category: Certified Reference Material</li><li>Analyte: Calcium (Ca)</li><li>Product code: ANS009</li><li>Primary starting material and purity: CaCO₃ 99.999%</li></ul>Matrix: 2% HNO₃ (v/v) prepared from sub-boiling distilled HNO₃ (ANALPURE®) and ultrapure demineralized water, filtered through a membrane filter with a pore size of 0.22 µm (resistivity ≥18 MΩ·cm)<blockquote>Certified concentration value and expanded uncertainty (k = 2) at 20 °C: 1,000 ± 5 mg/L</blockquote><h3>Specifications</h3><ul><li>Batch number: 1050</li><li>Date of manufacture: 29 August 2023</li><li>Shelf life: 5 years from the date of manufacture</li></ul><h4>Application</h4>For calibration and validation of analytical methods used for the analysis of aqueous solutions, such as atomic spectroscopy (AAS, AFS), molecular absorption spectrometry, and certain electroanalytical methods.<h4>Characterization and traceability</h4>This CRM is certified based on gravimetric preparation, which also ensures direct traceability to the SI unit – kilogram. The certified value, its uncertainty, and traceability were verified by complexometric methods (using SRM NIST 928) or instrumental analytical methods (AAS, AES, ICP-OES) using CRM AN9009(1N) through a short, uninterrupted calibration chain.<h4>Content of trace impurities in the prepared solution</h4><ul><li>Maximum 0.5 mg/L (total)</li></ul><h4>Homogeneity and stability</h4>The calibration solution is homogeneous, and its stability is guaranteed throughout the entire shelf life, provided it is stored under the conditions specified below.<h4>Storage and instructions for use</h4>This CRM must be stored and kept in its original packaging at temperatures between 5 and 30 °C. The manufacturer guarantees the stated shelf life and expiration date only if the material is handled properly.The solution temperature must be 20 ± 0.5 °C before each use. The date when the bottle was first opened must be recorded on the certificate. The expiration date, which depends on the date of first opening, must also be recorded on both the certificate and the label.After use, it is recommended to protect the bottle neck with a layer of parafilm. Small residual amounts in the bottle (less than 10% of the original content) should no longer be used. For this reason, especially in the case of dark bottles, it is advisable to record each withdrawn volume, for example directly on the bottle.Do not pipette directly from the bottle, and do not return any poured-off liquid back into the original packaging (bottle).

Aqueous Calibration Solution ASTASOL® ANS009

Anna Vanluchene&nbsp;from UCT Prague’s&nbsp;Department of Chemical Engineering has received a&nbsp;prestigious start-up grant from the Dagmar Procházková Fund. However, she did not receive funding right away. In this interview, she describes how she developed ten versions of her&nbsp;Illuminating Flow&nbsp;project idea (combining photocatalysis with flow reactors for pharmaceutical synthesis). She explains why she considers perseverance to be crucial when applying for grants, how international experience has influenced her approach to team management, and how her research can reduce the chemical industry’s&nbsp;dependence on fossil fuels and imports from China.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/VSCHT_Praha_Na_startovaci_grant_jsem_cekala_dva_roky_a_napsala_deset_verzi_projektu_2_5b7d63b8e9.jpg" alt="VŠCHT Prague/Tomáš Balický: I waited two years for a start-up grant and wrote ten versions of my project idea" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_VSCHT_Praha_Na_startovaci_grant_jsem_cekala_dva_roky_a_napsala_deset_verzi_projektu_2_5b7d63b8e9.jpg 127w," sizes="100vw" width="1128" height="1387"><h5>What did the Dagmar Procházková Fund grant mean to you?</h5>I&nbsp;consider it to be a&nbsp;great success. It is the first injection of funding that will allow me to ensure full independence for my research endeavour, to start my own research group, and to fund students so I&nbsp;can get started properly.<h5>What have been your previous experiences with grants?</h5>During my doctorate, a cotutelle (international doctorate under dual supervision), I&nbsp;was funded by a&nbsp;grant from the French government. Then I&nbsp;worked at the Academy of Sciences of the Czech Republic (CAS) and received a&nbsp;Marie Skłodowska-Curie Action (MSCA) Postdoctoral Fellowship to go abroad. The idea for my now-funded project was developed about two years ago and, since then, I&nbsp;have gradually developed and adapted the idea for various grant calls. I&nbsp;submitted about ten different versions of the proposal. I&nbsp;did not receive a&nbsp;grant from the Dagmar Procházková Fund last year, but this year, my application was successful.<h5>This probably requires a&nbsp;great deal of patience and perseverance.</h5>Certainly, because the success rates for most grants have been declining for some time. But as a&nbsp;motivational example, I&nbsp;will tell the story of Timothy Noel, a&nbsp;Belgian professor of chemistry living in the Netherlands. He applied for the prestigious European Research Council (ERC) grant, which is among the most sought-after in Europe, seven times. But no failure deterred him and eventually he succeeded and opened the door to potentially massive grant funding. He was already one of the world’s&nbsp;top scientists in the field at that time and openly described his journey on his blog <a target="_blank" rel="noopener noreferrer" href="https://www.noelresearchgroup.com/2022/03/17/my-personal-story-to-obtain-an-erc-grant-7-submissions-4-interviews-and-6-heartbreaks/">blog</a>.<h5>What advice does this convey to other grant applicants and early career researchers?</h5>Start early, read a&nbsp;lot, don’t&nbsp;give up, and—most importantly—apply repeatedly. Learn from rejections and overcome possible frustration from failures. Read blogs and books by successful people, where you will find not only the glorious results of their work, but also the hardships they faced over their entire journeys. Of course, building your team and laboratory is impossible without finances. I&nbsp;myself still hope that I&nbsp;will be able to receive even bigger grants in the future.<h5>How has your international experience influenced your scientific approach?</h5>A&nbsp;lot and on several levels. Different laboratories teach you how to do&nbsp;things differently. You gain varied experience about how different institutions function. You see other people’s&nbsp;positive motivations, their ability to be ambitious without negativity, their involvement in institutional matters, their openness to cooperation with companies (e.g., tech transfers, spin-offs). The most important thing is to broaden your horizons. I&nbsp;see going abroad as a&nbsp;necessity. What I&nbsp;have taken away the most is drive, great support, and the idea that scientific output is not just about metrics, but also about dedication to one’s&nbsp;topic.<h5>What is your Illuminating Flow: Transport Phenomena in Photocatalysis about, in layperson’s&nbsp;terms, and how is it unique?</h5>Most of today’s&nbsp;chemical industry is still based on thermal processes and fossil fuels. Photochemistry enables electrification, where the energy source is photons delivered by LEDs, which can generate electricity from renewable sources. Current research focuses mainly on chemical reactions and their mechanisms, but as a&nbsp;chemical engineer, I&nbsp;focus on designing processes and reactors suitable for industrial use. In batch reactors, light fades rapidly with distance from a&nbsp;source, so much of a&nbsp;reaction mixture is not illuminated. Flow reactors solve this problem, but they bring new challenges such as working with solid catalysts and subsequently scaling up production and achieving higher production rates of the desired chemicals at a&nbsp;given scale.One can imagine a&nbsp;transparent tube with a&nbsp;catalyst on the walls, upon which light shines and through which reactants flow. This project has a&nbsp;unique emphasis on engineering solutions and overall process efficiency.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/VSCHT_Praha_Na_startovaci_grant_jsem_cekala_dva_roky_a_napsala_deset_verzi_projektu_3_b978abf25c.jpg" alt="VŠCHT Prague/Tomáš Balický: I waited two years for a start-up grant and wrote ten versions of my project idea" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_VSCHT_Praha_Na_startovaci_grant_jsem_cekala_dva_roky_a_napsala_deset_verzi_projektu_3_b978abf25c.jpg 241w," sizes="100vw" width="1228" height="799"><h5>So, were you inspired by a&nbsp;gap in the market to connect photocatalysis with transport phenomena?</h5>Exactly. I&nbsp;combine my areas of expertise: microfluidics, photocatalytic degradation of organic substances (CAS), and synthesis (MSCA Postdoctoral Fellowship). The idea itself is not new, and pharmaceutical companies are very interested in “greener” photochemistry, but in practice, there is often a&nbsp;lack of appropriate engineering solutions and apparatus for industrial use.<h5>What are the practical applications of your work and what substances are you focusing on?</h5>Mainly on pharmaceuticals and on the synthesis of so-called fine chemicals, which are often the building blocks for the production of pharmaceuticals. There is also a&nbsp;geopolitical dimension to this, i.e. less dependence on imports from China and sustainable synthesis in Europe where it makes economic sense.<h5>And what chemicals are you specifically talking about?</h5>For example, building blocks for advanced synthesis, compounds prepared by trifluoromethylation reactions, or products of oxidation reactions with singlet oxygen. At the same time, we focus on reactions that are, in the classical design process, less safe or technologically demanding, where new approaches, such as photochemistry in flow reactors, could be safer and have better process control. Of course, this is not a&nbsp;universal solution for all types of reactions.<h5>The goal of this project?</h5>I&nbsp;plan to start a&nbsp;fully functional laboratory and research team, create high-quality experimental data on selected molecules and based on them, try to build cooperation with industrial partners. Without data, it is impossible to come to companies with just an idea. Within three years, I&nbsp;would like to have results that can be realistically presented and further developed.<h5>What are the main challenges in transport phenomena during photocatalysis?</h5>The methodology for repeatability of experiments in photochemistry is relatively demanding and there are unforeseen obstacles in building apparatus. Also, the scale-up from microliters to a&nbsp;larger scale.<h5>What methodology will you use, and how big are the microreactors and their flow rates?</h5>I&nbsp;have two different directions in methodological design. The first direction involves microreactors the size of a&nbsp;laboratory slide. You make a&nbsp;structure using a&nbsp;laser, and then you have to cast it and make a&nbsp;microreactor. This allows you to quickly adjust the geometry of the reactor. This method is, of course, not applicable in the commercial setting, but it is ideal for studying transport phenomena and precise measurements.The second direction involves reactors that are flow cells. These are already larger, approximately 15 x 15 centimetres, and their flow rates are in the order of millilitres per hour. This is the initial scale that we will further increase during the project.<h5>There is a&nbsp;big difference between a&nbsp;flow rate of microlitres per hour and industrial needs. Will it not work differently in reality?</h5>Our research will focus on studying the phenomena themselves for now, and scaling will be addressed later. In addition, we will combine the experimental data obtained with computer simulations that will help design suitable conditions for a&nbsp;larger scale. For some high-value fine chemicals, these scales, combined with continuous operation or parallelization of reactors, may already be practically usable.<h5>What catalysts will you use and how will you attach them to the reactor walls?</h5>I&nbsp;am focusing on heterogeneous photocatalysis, and we will mainly use graphitic carbon nitride and its more advanced modifications. These are semiconductor materials that can be synthesized relatively easily and are suitable for immobilization on glass reactor walls. A&nbsp;key part of this project is the creation of a&nbsp;stable catalytic layer for long-term flow-through operations. To increase the contact of reactants with the catalyst, we will also consider multiphase modes, for example, gas bubbling, in order to disrupt the otherwise laminar flow.<h5>Why did you choose this field and the Department of Chemical Engineering?</h5>During my postdoc in Belgium, the department had an opening for an Assistant Professor position that caught my attention and I&nbsp;applied for it. I&nbsp;did my undergraduate, graduate, and initial doctoral studies here, and I&nbsp;love the department. I&nbsp;have a&nbsp;Bachelor’s&nbsp;degree in Chemistry.<h5>Are you collaborating with anyone?</h5>We collaborate with BUT Brno focusing on creating layers and immobilizing catalysts on glass, as well as with the Institute of Chemical Process Fundamentals of the Academy of Sciences of the Czech Republic. And as for organic synthesis, we are connected with Ghent University via postdoc internships. At the same time, my colleague Viola Tokárová and I&nbsp;received a&nbsp;Czech Science Foundation grant in cooperation with BUT Brno and Masaryk University, with our part of the project focusing on the use of flow reactors for photochemical reactions and testing the antibacterial properties of photocatalytic materials. And I&nbsp;am writing other grant proposals in which I&nbsp;am trying to build new collaborations.<h5>What does the creation of an independent research group at UCT Prague look like?</h5>I&nbsp;started by renovating the premises that were assigned to me and gradually building my team. It is important for research work to have Ph.D. students; I&nbsp;have already hired one and we will recruit more. In addition to building the group, I&nbsp;will engage in securing further funding for the group, so I&nbsp;will be writing more grant proposals. It is important to think far enough in advance when it comes to prospective funding for a&nbsp;research group.<h5>What type of students are you looking for?</h5>The laboratory and team I&nbsp;are building will be very multidisciplinary, just like the area I&nbsp;am working on. That is why I&nbsp;am looking for students who are attracted to true multidisciplinary research, those who, for example, have knowledge of engineering, but who don’t&nbsp;mind a&nbsp;little bit of pure chemistry. One student in their own right does not have to (and cannot) know every subject, so I&nbsp;will ideally have a&nbsp;team consisting of different people with different research backgrounds. Motivated, DIY-type students who would rather enthusiastically build or invent something themselves than conduct repetitive measurements. Organic or analytical chemists will also find their place here. If this topic is interesting to students in any way, they can definitely contact me. I&nbsp;am also open to interdepartmental cooperation with other UCT Prague Faculties.<h5>How would you describe your path to photocatalysis/chemical engineering?</h5>Studying Chemistry as an undergrad gave me a&nbsp;broad perspective, but I&nbsp;was gradually narrowing my focus and eventually chose engineering. Chemical engineering intrigued me with its logic and was the easiest for me to grasp at the time. But I&nbsp;have always enjoyed working on projects more than the studies themselves. Even during my Bachelor studies, I&nbsp;really enjoyed and was interested in the Professor Štěpánek Group’s&nbsp;projects, where I&nbsp;was doing something completely different than I&nbsp;do&nbsp;now. I&nbsp;only got into photochemistry during my time at CAS and then, during my postdoctoral fellowship, I&nbsp;devoted myself to electrochemistry. My current focus is, thus, a&nbsp;natural interlinking of all these areas. Consequentially, I&nbsp;developed an awareness of the necessity to become independent and return to the department with my own, different research agenda, which, in my opinion, is an important and correct basis for establishing my own research group.<h5>What is the biggest challenge of this project for you?</h5>The transition from being a&nbsp;postdoc to a&nbsp;leadership position is a&nbsp;big change for me and I&nbsp;think it is not talked about enough. It means a&nbsp;shift from my own experimental work to leading a&nbsp;team, planning and delegating tasks, and motivating students. From a&nbsp;practical point of view, one of the main challenges is the transfer of reactions from the microscale to functional systems, the construction of reactors, the immobilization of catalysts, and generally confirming that this direction makes sense in the long term and that it has future potential.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/VSCHT_Praha_Na_startovaci_grant_jsem_cekala_dva_roky_a_napsala_deset_verzi_projektu_1_66ac267e06.jpg" alt="VŠCHT Prague/Tomáš Balický: I waited two years for a start-up grant and wrote ten versions of my project idea" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_VSCHT_Praha_Na_startovaci_grant_jsem_cekala_dva_roky_a_napsala_deset_verzi_projektu_1_66ac267e06.jpg 155w," sizes="100vw" width="830" height="839">

I waited two years for a start-up grant and wrote ten versions of my project idea

Article

Product

Application

Scientists

Science and research

The University of Chemistry and Technology, Prague is a natural centre of first-rate study and research in the area of chemistry in Czechia and is one of the country's largest educational and research institutions focused on technical chemistry, chemical and biochemical technologies, material and chemical engineering, food chemistry, and environmental studies.

UCT Prague

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Analytika is a Czech company that offers and produces certified reference materials (CRM) and (ultra)pure chemicals for quality control and quality assurance in laboratories, including accredited laboratories.

Our portfolio also includes pipettes and tips, digestors, PFA labware and other equipment for analytical laboratory and trace analysis.

ANALYTIKA

Thermo Scientific Niton Apollo Handheld LIBS Analyzer

High-performance handheld LIBS analyzer for fast, reliable carbon analysis. Ideal for L/H grade steels and alloy verification with maximum mobility and on-site productivity.

Confidently perform elemental analysis with the Thermo Scientific™ Niton™ Apollo™ handheld LIBS analyzer. When carbon detection and mobility are top of mind, industrial businesses rely on the Niton Apollo analyzer for excellent performance and enhanced productivity.&nbsp;Identify low alloy/carbon steels and L and H grade steels. This analyzer transforms a traditional cart-mounted optical emission spectroscopy (OES) system into a highly portable, easy-to-use handheld analyzer.<div><h3>⚙️ Features &amp; Benefits</h3><ul><li>1064nm laser</li><li>WiFi enabled</li><li>Macro and micro cameras</li><li>Hot swap battery (Milwaukee Tool™ compatible)</li><li>Tilting, color touchscreen</li><li>Directional keys</li><li>Chamber pressure, spectral type, light/dark sensor safety interlocks</li><li>Password protected security</li><li>IP54 certified (splash/dust proof)</li><li>Reduced aperture &amp; compact tapered-nose design</li></ul><h3>🧪 Applications</h3><ul><li>Determine alloy composition and grade for a wide range of metallurgical samples</li><li>Calculate carbon equivalency to determine piping weldability</li><li>Verify critical assets, such as, piping, valves and reaction vessels for Positive Material Identification (PMI)</li><li>Inspect materials at receiving, in-process fabrication and outgoing Quality Control (QC)</li><li>Qualify Material Test Reports (MTR)</li><li>Prevent contaminated scrap from entering the supply stream</li><li>Detect tramp and trace elements to meet regulatory standards</li><li>Enhance productivity by measuring challenging structural shapes and sizes, including 1/4" piping, 1/4" bars, and larger weld wires</li><li>Maximize efficiency and bypass additional costs and time spent with on-site small-part measurement capabilities</li><li>Obtain unprecedented precision with a refined tapered nose and Argon seal, increasing shots per cylinder and return on investment</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Niton_Apollo_Handheld_LIBS_Analyzer_5951f75476.jpg" alt="Thermo Scientific™ Niton™ Apollo™ Handheld LIBS Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Niton_Apollo_Handheld_LIBS_Analyzer_5951f75476.jpg 156w," sizes="100vw" width="650" height="650"><h3>📏 Specifications</h3><ul><li>Analytical Range: C, Al, Si, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Nb, Mo, W</li><li>Argon Usage:&nbsp;<ul><li>High purity argon purge</li><li>About 200 shots per cartridge</li></ul></li><li>Available Analytical Modes: Stainless steel mode, Low alloy/carbon steel mode</li><li>Bluetooth: Bluetooth™ 4.0 (supports print functionality)</li><li>Camera:&nbsp;<ul><li>Integrated CCD macro camera for capturing overview images of parts and tagging measurement locations</li><li>Integrated CCD micro camera for locating and recording measurement positions</li></ul></li><li>Certifications/Compliance:&nbsp;<ul><li>Certifications: IP54 certified (splash and dust proof)</li><li>Compliance: CE, RoHS, FCC, Industry Canada, Safety to IEC 61010-1:2010</li></ul></li><li>Data Entry: Touchscreen keyboard User customizable data entry</li><li>Data Storage:&nbsp;<ul><li>512 MB internal system memory / 16 GB industrial grade storage</li><li>Stores approximately 5,000 readings with spectra (fewer if macro and micro images are saved)</li></ul></li><li>Data Transfer: WiFi, USB</li><li>Description: Niton Apollo Handheld LIBS Analyzer</li><li>Dimensions (L × W × H): 12 x 13 x 4 in (30.48 x 33.02 x 10.16 cm)</li><li>Display Type: Tilting, color, resistive touchscreen display</li><li>Global Positioning System: Internal GPS (ability to include coordinates with sample information)</li><li>Languages: English</li><li>Laser: 1064nm</li><li>Libraries:&nbsp;<ul><li>Default alloy libraries based on SAE, AISI, ASTM, AA, DIN, GB standards,&nbsp;</li><li>Users may create, clone and edit libraries</li></ul></li><li>Licensing: Varies by region. Contact your local distributor.</li><li>Operating Environment: Temperature: 32°F - 104°F (0°C - 40°C)</li><li>Operating System: Linux™</li><li>Optional Accessories:&nbsp;<ul><li>Thermo Scientific™ bulk argon adapter</li><li>Additional laser safety glasses</li></ul></li><li>Power Consumption: 24V, 3.75A, 90W power supply, Milwaukee Tool™ battery pack Hot swap functionality keeps analyzer powered during battery replacements</li><li>Safety Features: Chamber pressure, spectral type, light/dark sensor interlocks</li><li>Software: NitonConnect PC software</li><li>Standard Accessories:&nbsp;<ul><li>Locking shielded carrying case</li><li>Two (2) Milwaukee M18™ Redlithium™ High Demand™ CP2.0 battery packs</li><li>One (1) Milwaukee M18™ &amp; M12™ multi-voltage charger</li><li>Five (5) Thermo Scientific™ analytical argon cartridges</li><li>Setup standards</li><li>Laser safety glasses</li><li>Instrument cleaning kit</li><li>Safety lanyard and carabiner</li><li>PC connection cable</li></ul></li><li>Weight (English): 6.4 lbs with battery</li><li>Weight (Metric): 2.9 kg with battery</li><li>Applications: Identify low alloy/carbon, L grade, and H grade steels</li><li>Unit Size: Each</li></ul><blockquote><h3>Helpful links</h3><ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-xrf-analyzer-selection-guide.html">Which Niton analyzer is right for me?</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-xrf-analyzer-rental-leasing.html">Should I rent or lease this product?</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/xrf-radiation-safety-training.html">Where can I get laser safety training?</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/industrial-elemental-radiation-solutions/how-does-libs-work.html">How does LIBS work?</a></li><li>What are the applications for this handheld LIBS analyzer?<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/positive-material-identification-oil-gas.html">Positive Material Identification</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/portable-manufacturing-metal-fabrication-analysis.html">Manufacturing and Metal Fabrication</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/portable-scrap-metal-recycling-analysis.html">Scrap Metal Recycling</a></li></ul></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/industrial-elemental-radiation-solutions/niton-apollo-handheld-libs-analyzer-faqs.html">I have additional LIBS questions, where can I learn more?</a></li></ul></blockquote></div>

Thermo Scientific ARL 9900 Total Cement Analyzer

Combines XRF and XRD in one instrument for fast and precise analysis of cement materials. One sample, one analysis – full chemical and phase information.

Achieve excellent process control and save fuel in your cement plant with both chemical and phase analysis in one simple operation. The Thermo Scientific™ ARL™ 9900 Total Cement Analyzer combines X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) technologies for a more complete characterization of any given crystalline sample.&nbsp;Various compounds can be controlled like quartz in raw meal, hot meal, free lime in clinker, clinker phases, and additions in cement (e.g. limestone, GBFS, pozzolan) or even clinker content in cement. Clinker phase analysis ensures consistent clinker quality, which is the key to high-performance concrete.The ARL 9900 Total Cement Analyzer provides fast process monitoring during the critical phases of cement manufacturing. It combines:<ul><li>XRF analysis – determines elemental composition</li><li>XRD analysis – provides mineralogical information</li></ul>Together, they ensure the integrity of the final product.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_9900_Intelli_Power_Series_3_75f234904f.jpg" alt="Thermo Scientific™ ARL™ 9900 Total Cement Analyzer: Integration of XRF and XRD in the same instrument: one sample, one instrument, one analysis for two techniques." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_9900_Intelli_Power_Series_3_75f234904f.jpg 237w," sizes="100vw" width="1143" height="753">Traditionally, both analyses required two separate X-ray instruments, leading to higher costs. Thanks to the compact integrated XRD system, both techniques are now included in one instrument, offering key benefits:<ul><li>Only one sample introduction – fast, simple, reliable</li><li>Single user interface for both techniques</li><li>Combined elemental and phase results in one report</li><li>Minimized floor space</li><li>Replaces two instruments</li><li>Rapid and precise analysis of solid samples</li></ul>IntelliPower: choose power level as needed – 1200W, 2500W, 3600W or 4200W Advanced software: instant result reporting after analysis Easy upgrades for future analytical needs<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_9900_Total_Cement_Analyzer_8c67ede30b.jpg" alt="Thermo Scientific™ ARL™ 9900 Total Cement Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_9900_Total_Cement_Analyzer_8c67ede30b.jpg 165w," sizes="100vw" width="1626" height="1536"><h3>X-ray System</h3><ul><li>X-ray tube mounted above the sample – prevents damage (e.g. from fragile pellets)</li><li>Thermostatically regulated spectrometer – precise, sensitive, and stable measurements</li></ul><h3>Fixed Monochromators</h3><ul><li>Compact slit-crystal geometry – detects trace elements</li><li>Simultaneous multi-element analysis – for faster response</li></ul><h3>XRF Goniometers</h3><ul><li>Programmable for quantitative or qualitative element analysis</li><li>High-speed sequential X-ray spectrometry using Moire fringe technology</li><li>Handles nonroutine element analysis</li></ul><h3>Automation</h3><ul><li>Fast and reliable sample introduction, variable automation levels</li><li>Can be linked to automatic sample prep systems for online process control</li></ul>

Thermo Scientific™ GS Omni Analyzer

Thermo Scientific GS Omni uses PGNAA to provide continuous, calibration-free elemental analysis of process streams. Designed for demanding industrial slurry applications.

The Thermo Scientific™ GS Omni Light Element Analyzer provides robust, accurate elemental analysis for multiple process streams, delivering real-time information for the optimization of slurry beneficiation processes such as froth flotation. Utilizing industry-leading Prompt Gamma Neutron Activation Analysis (PGNAA) technology, it measures both heavy and light elements, crucially covering the Z&lt;20 elements – calcium and lighter – that are less well-suited to X-Ray Fluorescence (XRF) analysis. Together, Thermo Scientific PGNAA and XRF analyzers allow customers to measure the broadest possible range of elements.Since the PGNAA signal is unaffected by particle size, ore matrix or inter-element interference, the GS Omni requires no recalibration as the ore changes, enabling robust measurement with minimal cost and ongoing effort. Easily configured for between two and eight process streams, it provides data that you can confidently rely on. Use the GS Omni to control contaminant elements, improve product quality, increase recovery, and lower production costs.The GS Omni offers near metallurgical quality analysis for up to eight process streams, depending on concentration, elements of interest, required cycle analysis time, plant layout, and process control considerations.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GS_Omni_Analyzer_927ddc6cd4.jpg" alt="Thermo Scientific™ GS Omni Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GS_Omni_Analyzer_927ddc6cd4.jpg 237w," sizes="100vw" width="650" height="427"><h3>🔑 Key features include:</h3><ul><li>Capability to measure light elements such as calcium, chlorine, sulfur, aluminum, silicon, magnesium, and sodium, for industrially relevant analysis over an extended range of elements relative to XRF.</li><li>Unaffected by matrix effects and particle size – unlike XRF – for robust measurements in the face of process changes and ore variability with no requirement for recalibration.</li><li>Scintillation detectors eliminate the need for cooling apparatus, enabling simpler set-up and operation with no requirement for chillers or special environmental control.</li><li>Modular multiplexer, for expansion from 2 to 8 streams.</li><li>Holding tank and sample recirculation through the measurement zone provide deaeration, which along with multiple passes through PGNAA source delivers more accurate measurement for slurry streams.</li><li>Factory calibrated for slurry applications with only infrequent site checks required, enabling minimal manual input and low maintenance.</li></ul>

Thermo Scientific MSA-330 Multi-Stream Slurry XRF Analyzer

Thermo Scientific MSA-330 (XRF) analyzer delivers elemental analysis (Ca–U) for up to 12 slurry streams, eliminating cross-contamination, with low operational cost and easy maintenance.

The Thermo Scientific™ MSA-330 Multi-Stream Slurry XRF Analyzer provides reliable, flexible, cost-effective elemental analysis for up to 12 slurry streams, delivering information for the monitoring and control (manual or automatic) of mineral beneficiation circuits. Keeping each stream in a separate analysis zone, it eliminates cross-contamination without any need for a multiplexer or demultiplexer, minimizing head loss and plant elevation requirements. Use the MSA-330 to monitor feed, concentrate and tailings grades, to drive up process efficiency, improve metal recovery, optimize reagent consumption, and reduce costs.The MSA-330 quantifies % solids and up to 20 elements for between 3 and 12 slurry streams according to a predefined schedule to deliver real-time process trend information for monitoring and control.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_MSA_330_Multi_Stream_Slurry_XRF_Analyzer_56ef33bd34.jpg" alt="Thermo Scientific™ MSA-330 Multi-Stream Slurry XRF Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_MSA_330_Multi_Stream_Slurry_XRF_Analyzer_56ef33bd34.jpg 156w," sizes="100vw" width="650" height="650"><h3>Key features include:</h3><ul><li>Capability to measure and provide composite samples for 3 to 12 slurry streams, for flexible, cost-efficient process monitoring.</li><li>Dedicated, separate path for each process stream, from sample point to sample discharge, for the elimination of cross-contamination and simplified sample return.</li><li>Low head design simplifies sample transport design and is advantageous for gravity feed or return of samples to the process.</li><li>Advanced energy dispersive X-ray detector, for accurate measurement from calcium to uranium with integrated Peltier cooler for reliable, trouble-free operation over a wide range of in-plant environmental conditions.</li><li>Cross-cut sampler for each stream provides sampling for analyser calibration and composite samples.</li><li>Optional vacuum filter station available for each of the composite samplers.</li><li>When fed from a SamStat30C, the dedicated cross-cut samplers in the MSA-330 can be used to acquire composite samples for material balancing and accounting purposes.</li><li>No multiplexer or demultiplexer delivers a flow head space solution, lowering implementation and operational costs for a centralized analyser system.</li><li>High flow capability, for handling the full flow of low flowrate process streams, eliminating additional costs associated with a sampler and sample delivery system. 300mm wide tank as standard with larger sizes available for higher flow rates.</li></ul>

Thermo Scientific™ ARL™ SMS-XY Automation for XRF

The Thermo Scientific™ ARL™ SMS-XY XRF system enables unattended operation, sample prep and analysis with high quality, efficiency, and reduced cost.

<div><div><h4>Increase your capacity to handle more samples in less time.&nbsp;</h4>The Thermo Scientific™ ARL™ SMS-XY Automation for XRF permits continuous and unattended operation of<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900"> Thermo Scientific™ ARL™ 9900 series X-ray Spectrometers</a>. Increased automation brings:&nbsp;<ul><li>Higher analysis quality</li><li>Lower analysis costs</li><li>Sustainable analysis cadence with predictable and reproducible response times</li><li>Short payback period</li></ul><h3>Automated Sample Handling</h3>The Thermo Scientific™ ARL™ OEM-XY automated sample loader allows connecting the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1211">ARL™ PERFORM'X</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900</a> series to fully automatic preparation machines. Key features:<ul><li>Prepared samples (usually pressed pellets) are transported via belt conveyor from press to spectrometer</li><li>Unattended operation is ensured by engineering software supervision</li><li>Suitable for cement, metallurgy, and mining applications</li></ul></div><div><h3>Complete Automation with ARL SMS Software</h3>The ARL SMS software provides full automation of Thermo Scientific™ XRF spectrometers for routine production control, including sample preparation and analysis.<h3>Key Benefits:</h3><ul><li>Regular analysis of control samples with SPC evaluation for anomaly detection</li><li>Online connectivity for automatic sample preparation</li><li>Supports up to two sample transfer systems</li><li>Allows manual or online registration of externally prepared samples</li><li>Available as turnkey solution in ARL™ QuantoShelter cabin for production floor deployment</li><li>Seamless integration into quality control and production processes</li><li>Automatic result transmission after analysis</li></ul><h3>Compatible Sample Types:</h3><ul><li>Metallic samples (ferrous and non-ferrous)</li><li>Oxides from metal production (ores, sinters, baths, slags, blast furnace slags)</li><li>Oxides from minerals and cement</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_XY_Automation_for_XRF_2_8bce1d83a2.jpg" alt="Thermo Scientific™ ARL™ SMS-XY Automation for XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_XY_Automation_for_XRF_2_8bce1d83a2.jpg 179w," sizes="100vw" width="650" height="569"></div></div>

Thermo Scientific ARL SMS-Omega XRF Instrument

Boost production efficiency with fully automated XRF analysis. The ARL OPTIM'X with SMS-Omega ensures high-quality results with unattended prep, rapid WDXRF, and compact design.

Keep up with production demands with automated XRF analysis. When different types of material have to be processed in parallel, the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL OPTIM'X™ WDXRF Spectrometer</a> with the Thermo Scientific™ ARL™ SMS-Omega XRF Instrument is the solution. Automatic sample preparation and handling without user intervention, combined with rapid analysis, provide high-quality results. This innovative solution has a compact footprint of less than 1 m², so it can be installed in centralized laboratories or on production shop floors, wherever fully automated industrial production control is needed.This cost-effective system is a unique combination of Thermo Scientific XRF and automation technology for fully automated sample preparation and analysis of one material type.<h3>Main Features</h3><ul><li>Unattended instrument monitoring and integrated audit trail functions</li><li>Sample handling arm equipped with a suction device (metals version) or a gripper (oxide version) loads samples for analysis.</li><li>Samples processed under strict identical and reproducible conditions</li><li>Fixed circular magazine</li><li>XRF functionality provided by the flexible and compact <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL™ OPTIM'X WDXRF </a>Instrument</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg 233w," sizes="100vw" width="650" height="435"><h3>Features of the OPTIM'X WDXRF Instrument</h3><ul><li>WDXRF platform with sequential and/or simultaneous capabilities</li><li>Configurable to cover all elements from fluorine (F) to uranium (U) in sequential mode</li><li>Fast analysis of solids, liquids and loose powders with superior spectral resolution</li><li>No water cooling or gas supply required (depending on configuration)</li><li>Closely coupled optics for increased intensity (50% higher than conventional geometry)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg" alt="Thermo Scientific™ ARL™ OPTIM'X WDXRF Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg 94w," sizes="100vw" width="650" height="1077"><h3>Features of the Fixed Circular Magazine</h3><ul><li>Eight positions for storing reference standards</li><li>Allows occasional manual introduction of prepared samples</li><li>One additional position dedicated to filing production samples following analysis</li><li>The complete system can also be supplied within a Thermo Scientific™ ARL™ QuantoShelter container for in situ analysis closer to the process.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg 216w," sizes="100vw" width="650" height="471">

Thermo Scientific ARL SMS-2300 Robotics-Based Automation for OES or XRF

Thermo Scientific™ ARL™ SMS-2300 enables fast, reproducible, and unattended OES/XRF analysis to optimize steel production and meet the strictest quality standards.

<h4>Meet stringent steel specifications while increasing efficiency and lowering production costs.</h4>The Thermo Scientific™ ARL™ SMS-2300 Robotics-Based Automation for OES or XRF is an automated quality control solution to optimize your steel production operation. With the high-performance ARL SMS-2300 system, even complex samples are prepared and analyzed under reproducible conditions without operator intervention, eliminating human variables and subjective factors. 👉 Result: Increased output, reliable results, and reduced costs.<h3>🔧 ARL SMS-2300 Automation for OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended 24/7 operation of:<ul><li>ARL™ 4460</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">ARL™ iSpark</a> / <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977">iSpark Plus OES</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900 XRF</a></li></ul><h3>✅ Main Features</h3><ul><li>Easy integration into fully automatic laboratories</li><li>Installed in ARL QuantoShelter, close to production process</li><li>Parallel tasking:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time</li></ul></li><li>High throughput with:<ul><li>Automatic sample preparation</li><li>Haas Mini Mill + ARL™ PrepControl™ + EasyPrep™ software</li></ul></li><li>Direct access to Haas Mini Mill for faster ferrous sample processing</li><li>Factory-configured and customized</li><li>Compact chassis, simple installation, and integrated electronics</li><li>High reliability, rapid ROI, and fast result availability</li><li>Frees lab personnel from routine tasks</li><li>ISO 9001 compliant manufacturing and maintenance</li></ul><h3>🚀 Advanced Technology</h3><ul><li>Fanuc industrial robot</li><li>OXSAS analytical software</li></ul>

Thermo Scientific ARL SMS-3300 Automation for Single or Twin OES or XRF

Thermo Scientific™ ARL SMS-3300 enables fully automated operation of one or two OES or XRF spectrometers, enhancing lab efficiency in industrial environments.

Drive process control laboratory efficiencies in the metals, mining and cement industries with the Thermo Scientific™ ARL™ SMS-3300 Automation for Single or Twin OES or XRF, a complete laboratory workflow automation solution. The automation of single or multiple spectrometers and preparation machines with the ARL SMS-3300 system offers:👉 Reduced sample analysis cost, 👉 Increased sample throughput, 👉 Better reproducibility, and 👉 Higher quality resultsfor users requiring more comprehensive and integrated automation solutions in the metals, mining and cement industries.<h3>🔧 ARL SMS-3300 – Automation for Single or Twin OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended, 24/7 operation of:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">Thermo Scientific™ ARL™ iSpark </a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977"> iSpark Plus </a>(Optical Emission Spectrometers)</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">Thermo Scientific™ ARL™ 9900</a> (X-ray Fluorescence Spectrometer)</li></ul><h3>✅ Main Features</h3><ul><li>Designed for easy integration into fully automatic laboratories</li><li>Can be mounted in Thermo Scientific ARL QuantoShelter, close to the production process</li><li>Parallel task execution:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time by the spectrometer, independently of the robot</li></ul></li><li>Direct access to milling machine for reduced processing times of ferrous samples</li><li>Higher throughput with:<ul><li>Automatic sample preparation</li><li>ARL™ PrepControl™ system + ARL™ EasyPrep™ software</li></ul></li><li>Factory configured and customized</li><li>Compact chassis and simple installation</li><li>Integrated electronics</li><li>Improved analysis reliability and quality</li><li>Very rapid payback</li><li>Faster result availability</li><li>Qualified lab personnel freed from routine tasks</li><li>Manufactured and maintained according to ISO 9001-2000 procedures</li></ul><h3>🚀 Advanced Technology</h3><ul><li>State-of-the-art Fanuc industrial robot</li><li>OXSAS analytical software</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg" alt="Thermo Scientific™ ARL SMS-3300 Automation for Single or Twin OES or XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg 245w," sizes="100vw" width="650" height="366">

Thermo Scientific ARL SMS-3500 Automation for Twin OES or XRF

The ARL SMS-3500 automates two OES or XRF spectrometers with smart sample flow management for fast, efficient, and continuous production control.

Drive process control laboratory efficiencies in the metals and mining industries with the Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF, a complete laboratory workflow automation solution. Primary metals producers' laboratories typically run two fully duplicate and separate spectrometry lines to assure fast response times when several urgent samples must be processed simultaneously. 👉 The ARL SMS-3500 system is an affordable alternative.The automation of multiple spectrometers and preparation machines with the ARL SMS-3500 system offers:<ul><li>Reduced sample analysis cost</li><li>Increased sample throughput</li><li>Better reproducibility</li><li>Higher quality results</li></ul>for users requiring more comprehensive and integrated automation solutions in the metals and mining industries.The ARL SMS-3500 Automation for Twin OES or XRF simplifies sample handling by providing:<ul><li>a single introduction location for all samples</li><li>a magazine storage function to free the introduction 👉 This reduces response times, increases sample processing cadence, and improves the availability of automatic sample preparation in highly critical production control environments.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg" alt="Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF - 2.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg 217w," sizes="100vw" width="650" height="469"><h3>✅ Main Features</h3><ul><li>No need for time-consuming electro-mechanical transfer systems – the SMS-3500 robot moves samples between components within seconds</li><li>Simplified operation and reduced system complexity for easier maintenance and servicing</li><li>Single interface screen for all sample tracking and automation functions</li><li>Unified registration and introduction point for all production samples, with automated routing to the appropriate system components</li><li>Support for two sample preparation machines:<ul><li>Reduces response times</li><li>Increases processing cadence</li><li>Improves automatic sample preparation availability</li></ul></li><li>Operator workload is reduced – the system manages samples by priority and availability of resources<ul><li>Includes internal sample storage to free the introduction point immediately</li></ul></li><li>Each instrument can be used offline for manual tasks without interrupting automated operation</li><li>Uses the same analytical software for XRF and OES</li><li>Automation is based on proven ARL SMS software</li></ul><h3>🔧 Recommended for:</h3><ul><li>Iron and steel applications</li><li>High alloy, stainless steel, copper, brass, and bronze applications</li><li>Aluminum or fire assay applications</li></ul>

Thermo Scientific IonicX Portable XRF Analyzer

Thermo Scientific™ IonicX enables fast and accurate salt analysis in raw materials using portable XRF without complex preparation or destructive testing.

<div><div>Identify ionic salts in seconds with minimal sample preparation. The Thermo Scientific™ IonicX™ Portable XRF Analyzer provides:<ul><li>Fast and accurate verification of ionic salt raw materials</li><li>High sample throughput for pharmaceutical and biopharmaceutical manufacturers</li></ul>Cut testing time and costs by replacing:<ul><li>time-consuming</li><li>resource-intensive</li><li>wet chemistry and benchtop methods</li></ul>with a ✅ non-destructive, ✅ non-contact, ✅ portable XRF analyzer for ionic salts.<h3>⚙️ Key Features</h3><ul><li>Portable verification of a wide range of ionic salts in seconds</li><li>Compliant with 21 CFR Part 11:<ul><li>electronic signatures</li><li>user access control</li><li>audit trails</li></ul></li><li>Non-destructive testing of raw materials</li><li>Minimal sample preparation</li><li>Simple operation, no extensive operator training required</li><li>Lightweight and compact design for easy portability</li><li>Wi-Fi enabled</li><li>Hot Swap Battery</li><li>IP54 Certified – splash and dust proof</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Ionic_X_Portable_XRF_Analyzer_2_aa24221e46.jpg" alt="Thermo Scientific™ IonicX Portable XRF Analyzer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Ionic_X_Portable_XRF_Analyzer_2_aa24221e46.jpg 156w," sizes="100vw" width="650" height="650"><h3>📏&nbsp;Specifications</h3><ul><li>Bluetooth: Supports print functionality and barcode reader</li><li>Camera:<ul><li>Macro Camera: Integrated CCD macro camera for capturing overview images of parts and tagging measurement locations</li><li>Micro Camera: Integrated CCD micro camera for locating and recording measurement positions</li></ul></li><li>Certifications/Compliance:&nbsp;<ul><li>EN 55011:2010</li><li>EN 61326:2013</li><li>FCC 47 CFR Part 15</li><li>Safety EN 61010; 2010 (3rd Ed) with national deviations for US and Canada</li><li>RoHS EN 50581; 2012</li></ul></li><li>Data Entry:&nbsp;<ul><li>Touchscreen keyboard</li><li>User customizable data entry</li><li>Optional wireless remote barcode reader</li></ul></li><li>Data Storage:&nbsp;<ul><li>512 MB internal system memory/16 GB industrial grade storage</li><li>Stores approximately 130,000 readings with spectra (fewer if macro and micro images are saved)</li></ul></li><li>Data Transfer: Wi-Fi, USB</li><li>Dimensions: 12 × 12 × 8 in. (30.48 × 30.48 × 20.32 cm)</li><li>Display Type: Tilting, color, resistive touchscreen display</li><li>IP Rating: IP54 (splash and dust proof)</li><li>Languages: English</li><li>Licensing: Varies by region; Contact your local distributor</li><li>Operating Environment:&nbsp;<ul><li>Temperature: 0°C to 50°C (external fan recommended when ambient temperature is greater than 33°C)</li><li>Humidity: 10% to 90% relative humidity non-condensing</li></ul></li><li>Operating System: Linux</li><li>Optional Accessories:&nbsp;<ul><li>Thermo Scientific portable test stand</li><li>Thermo Scientific mini test stand</li></ul></li><li>Power Consumption: 12V lithium-ion battery, or 12V DC, 3A, 3.6W power supply</li><li>Security Features: Password-protected user security</li><li>Software: IonicX PC software</li><li>Spot Size: Standard: 8 mm collimation</li><li>Standard Accessories:&nbsp;<ul><li>Locking shielded carrying case</li><li>Two (2) lithium-ion battery packs</li><li>One (1) 110/220 VAC battery charger/AC adaptor</li><li>Check samples</li><li>Safety lanyard</li><li>PC connection cable (USB)</li></ul></li><li>System Details: Built-in standardization via automatic system check</li><li>Weight (English): 5.8 lbs. with battery and test stand</li><li>Weight (Metric): 2.6 kg with battery and test stand</li><li>X-Ray Source Type:&nbsp;<ul><li>X-Ray Tube: Ag anode (6–50 kV, 0–500 μA, 5W max)</li><li>Dynamically adjustable current for optimal sensitivity on every analysis</li></ul></li><li>Applications: Raw Material Testing</li><li>Detector Type: Proprietary Large Area Drift Detector</li><li>Tube Voltage: 6 to 50 kV</li><li>Unit Size: Each</li></ul></div></div>

Products distributed by Thermo Fisher Scientific (EMEA) - page 4

Related content

I waited two years for a start-up grant and wrote ten versions of my project idea

Aqueous Calibration Solution ASTASOL® ANS009

News from LabRulezICPMS Library - Week 13, 2026