This leaflet is intended as a comprehensive checklist outlining the key steps to consider when participating in a proficiency testing (PT) scheme. Selection of an appropriate PT scheme must be ensured [1]. It provides essential tips to help participants avoid common mistakes and achieve successful outcomes. The main stages of PT participation are covered, from receipt of PT items through to the review of received evaluations [1-3]. Documentation of outcomes for many of the topics addressed below is recommended, particularly for accreditation purposes.&nbsp;<h4>1. Prior to PT participation&nbsp;</h4><ul><li>Verify that the PT provider has up-to-date billing, shipping and technical contact information for the laboratory.&nbsp;</li><li>Ensure that the laboratory has documented procedures in place or, if necessary, prepare procedures for: reviewing PT results upon receipt; taking corrective actions when assessments indicate poor performance; conducting periodic reviews of PT results over time; storing PT reports.&nbsp;</li></ul><h4>2. Receipt of PT items&nbsp;</h4><ul><li>Open the package of PT items immediately upon receipt to check their condition. Contact the PT provider and request a replacement if any PT items are missing, broken, leaking or otherwise compromised.&nbsp;</li><li>Study the PT provider’s instructions carefully to ensure they are clear and understandable (e.g. handling, storage, pre-treatment, preparation, reporting of results).&nbsp;</li><li>Register, identify, and mark the PT items according to normal procedures in the laboratory.&nbsp;</li><li>Store the PT items in accordance with any instructions provided.&nbsp;</li></ul><h4>3. Measurements&nbsp;</h4><ul><li>Read the instructions supplied by the PT provider carefully before starting the measurements.&nbsp;</li><li>Carry out the measurements under conditions as close as possible to routine testing, unless otherwise instructed by the PT provider.&nbsp;</li><li>Ensure that the analysis is carried out to meet any measurement deadline requirements.</li></ul><h4>4. Reporting results&nbsp;</h4><ul><li>Allow sufficient time for reporting the results to the PT provider.&nbsp;</li><li>Report all the information required by the PT provider.&nbsp;</li><li>Ensure that the results are reported in the requested format (e.g. units, number of significant figures, decimal places).&nbsp;</li><li>Ensure that the results you are going to submit are those that you intend, correcting for any identified transcription errors (e.g. mix-up of samples or analytes).&nbsp;</li><li>Confirm that the submission process of the results to the PT provider has been completed.&nbsp;</li></ul><h4>5. Reviewing PT reports&nbsp;</h4><ul><li>Read the PT report as soon as possible and check that your results and other information are correctly represented; report any errors immediately to the PT provider.&nbsp;</li><li>Take notice of any comments on the specific PT round, evaluation of performance, and other matters relevant to the results of the PT round which provide valuable context to your individual results.&nbsp;</li><li>Review your assessed performance carefully in accordance with your laboratory procedures.&nbsp;</li><li>Store the PT report according to internal procedures.&nbsp;</li></ul><h4>6. Follow-up on participation in a PT scheme&nbsp;</h4><ul><li>Investigate any poor performance in accordance with your laboratory quality system [4].&nbsp;</li><li>Evaluate the impact of poor performance (e.g. risk that poor quality data may have been reported to customers).&nbsp;</li><li>Implement any corrective actions as relevant, and if possible, make use of any surplus PT items [5] to assess effectiveness.&nbsp;</li><li>Monitor any trends in performance over time, concentration levels, etc.&nbsp;</li></ul><blockquote>Information about PT providers and PT schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organizations.</blockquote>

Basic instructions for participants in a proficiency testing scheme

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 9th March 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Metrohm, Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: Spectral Transmission Measurements of Pharmaceutical Packaging</h3>Using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV%E2%80%91Vis">Agilent Cary 60 UV‑Vis</a> Diffuse Reflectance Accessory following EP &lt;3.2.1&gt;, USP &lt;660&gt;, and USP &lt;661.2&gt;<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_pharmaceutical_packaging_transmission_cary_60_uv_vis_dra_5994_8889en_agilent_2c933e5576.pdf">Full PDF for download</a></li></ul>Pharmaceutical containers play a significant role in maintaining final drug stability, integrity, and safety, from manufacturing to distribution to the end user. The ability of the packaging system to protect the drug from external agents is critical for quality assurance. Therefore, all pharmaceutical packaging systems must conform to stringent standards.&nbsp;Plastic and glass are commonly used materials for packaging, and they are typically transparent or opaque. Transparency to ultraviolet (UV) light can pose a risk to light‑sensitive pharmaceuticals, as exposure can initiate adverse—and sometimes harmful—photochemical reactions that can significantly affect drug quality and reduce shelf-life.1&nbsp;The EP and USP define well-established standards, designed to measure physiochemical and functional properties of packaging components intended to contain a drug product (pharmaceutical containers), to meet regulatory requirements. The EP Chapter &lt;3.2.1&gt; Glass Containers for Pharmaceutical Use includes a functionality test method to demonstrate adequate light resistance of colored glass containers through spectral transmission measurement. An included acceptance criterion specifies the allowed maximum amount of light transmitted by the tested material, defined by the drug product dosage administration form. For example, for glass containers that package oral drug products, the acceptance criterion defines that the observed spectral transmission should not exceed 10% at any wavelength in the range of 290 to 450 nm (&lt; 10%T).2 The identical test and criterion are found in USP Chapter &lt;660&gt; Containers – Glass.3 In addition, the USP Chapter &lt;661.2&gt; Plastic Packaging Systems for Pharmaceutical Use also includes the analogous functionality test method and acceptance criterion for plastic pharmaceutical packaging.4&nbsp;The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV%E2%80%91Vis">Cary 60 UV-Vis spectrophotometer</a>, equipped with the Cary 60 UV-Vis DRA, was chosen for measurement due to its extended ability to reliably measure precise transmission of scattering materials (Figure 1). The Cary 60 UV-Vis is a versatile spectrophotometer; however, measuring materials like plastics and glass, which are textured, translucent, or opaque in a manner that scatters light can result in challenges in satisfactorily measuring light transmittance with standard techniques. In a standard spectrophotometer, scattering materials tend to diffuse transmitted light, deviating an unquantifiable amount of light from the direct optical path of the detector. The detector may not collect all the scattered (lost) light, resulting in inaccurate measurements and results.&nbsp;For this reason, the Cary 60 UV-Vis was equipped with an internal DRA, which uses a 50 mm integrating PTFE-coated sphere that easily sits inside the spectrophotometer's sample compartment. For these applications, using a DRA can optimize light collection. The sphere's design captures all scattered light uniformly, overcoming scattering losses for accurate measurement of transmitted light. In applications where total transmission is crucial for quality assurance, the DRA is an essential tool for accurate measurements.<h4>Conclusion&nbsp;</h4>In this application note, an Agilent Cary 60 UV-Vis spectrophotometer, fitted with an Agilent Cary 60 UV‑Vis DRA, was used to reliably and quickly determine the spectral transmission of packaging systems used for pharmaceuticals, following the EP &lt;3.2.1&gt;, USP &lt;660&gt;, and USP &lt;661.2&gt; test methods for functionality of light-resistant packaging systems. The integrating sphere enabled the instrument to accurately measure total transmittance of plastic and glass (scattering) materials.&nbsp;All containers presented less than the defined maximum %T specification, demonstrating light-resistance functionality for containing light-sensitive drug products for oral administration. This method illustrates the importance of accurate testing for quality assurance of pharmaceutical packaging. The Agilent Cary 60 UV-Vis spectrophotometer, paired with Cary WinUV Pharma software, delivers secure data management and compliance for regulated pharmaceutical labs.<h3>2. Metrohm: Multiparameter hops analysis by near-infrared spectroscopy (NIRS)</h3>Rapid determination of alpha acids, beta acids, cohumulone content, total oil content, HSI, and moisture<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nir_130_download_6177b89ee1.pdf">Full PDF for download</a></li></ul>The quality of hops and hop pellets is vital across the entire brewing supply chain. Traditional methods used for quality control (e.g., titration and HPLC) are highly accurate and widely accepted. They are also time consuming, labor intensive, and dependent on chemical reagents which not only incur ongoing material costs but also require careful handling and proper disposal. Near-infrared spectroscopy (NIRS) offers a compelling alternative when ultra-high precision is not necessary. It enables the rapid analysis of multiple parameters within a minute without using any chemicals. This Application Note outlines the measurement setup and the results of cohumulone, hop oils, and moisture content, the hop storage index (HSI), and hops acids analysis with NIRS.<h4>EXPERIMENTAL EQUIPMENT&nbsp;</h4>More than 500 fresh hop samples and ground hop pellets were analyzed on an <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=220&amp;search=omnis+nir">OMNIS NIR Analyzer Solid</a> (Figure 1). The samples were added to an OMNIS sample cup and analyzed in diffuse reflection mode. To include sample variety, the sample rotated during measurement to collect spectra from different locations. The automatically averaged spectra were used for model development. Spectra acquisition, model development, and validation were carried out with the OMNIS Software.&nbsp;Reference values for alpha acids were obtained using various official methods, including EBC 7.4, EBC 7.5, and EBC 7.7. Total oils and beta acid content were determined using EBC 7.4, while EBC 7.7 was employed for cohumulone analysis. Moisture content and the hop storage index (HSI) were measured using a halogen moisture analyzer and a UV-VIS photometer, respectively.<h4>CONCLUSION</h4>This Application Note demonstrates the feasibility of using NIR spectroscopy for the analysis of freshly harvested hops and ground hop pellets to determine cohumulone, moisture, and total oil content, HSI, and alpha and beta acids. Using alpha acids as an example, the difference between a prediction model covering the full concentration range and a model specific to a narrower range was highlighted. The latter reduced the prediction error by a factor of two.&nbsp;Users can apply this approach to maximize accuracy. In the OMNIS Software, both models can be combined to automatically perform the following sequence. First, the alpha acid concentration is estimated using the broad-range model; then, a more precise prediction is made using the restricted-range model.<h3>3. Shimadzu: Observation of Acrylic Block Fracture during Impact Compression Using the Hopkinson Bar Method</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01146_en_dc42e77a9c.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>The HPV -X3 offers three times the resolution of conventional models, enabling observation of specimen fracture at much higher resolution.</li><li>With a maximum frame rate of 20 Mfps, the HPV-X3 is well-suited for observing high-speed phenomena such as an impact test</li></ul>Understanding materials properties is critical to product design. In particular, for applications such as transportation equipment, where materials may be subjected to impact loads, it is essential to evaluate not only static properties but also impact properties. When subjected to impact, materials may exhibit stress and strain characteristics different from those under static loading, making it essential to quantify these characteristics through impact testing.&nbsp;The Hopkinson bar method is a well-established technique for impact compression testing. Proposed by B. Hopkinson, this method enables detailed analysis of a material’s impact response and evaluation of its fracture properties by subjecting the specimen to a sudden force using a bar-launching device. This paper presents an example of an impact compression test on an acrylic specimen with a central circular hole, recorded with an HPV-X3 high-speed video camera (Fig. 2) using the Hopkinson bar method.<h4>Imaging System&nbsp;</h4>The imaging devices are listed in Table 1, and the imaging conditions are listed in Table 2. As shown in Fig. 4(b), laser illumination was directed from the rear of the specimen toward the lens, and imaging was performed with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X3">HPV-X3</a> using a close-up ring, bellows, and macro lens. This setup enabled observation of the fracture process in the acrylic block. Two types of imaging were conducted: observation of crack propagation immediately after loading, and observation of subsequent fracture.<h4>Conclusion&nbsp;</h4>The impact compression test of an acrylic specimen using the Hopkinson bar method was observed using the HPV-X3 highspeed video camera. Inside the compressed specimen, the propagation of a wavefront believed to be a stress wave was first observed. Subsequently, cracks propagated from the central circular hole toward the left and right surfaces, and finally, diagonal cracks formed, leading to complete fracture. The progress of this series of fracture processes was clearly captured.&nbsp;The HPV-X3 has three times the resolution of the previous <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X2">HPVX2 model</a>, enabling more detailed observation of specimens during impact tests, including the Hopkinson bar method. Furthermore, because fracture phenomena during impact testing occur at high speeds, the HPV-X3, which can record images at up to 20 Mfps, is ideal for capturing them.<h3>4. Thermo Fisher Scientific: Analysis of silica in air filters using ARL X’TRA Companion X-ray Diffractometer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/analysis_of_silica_in_air_an41521_a3b8eb33d5.pdf">Full PDF for download</a></li></ul>The analysis of silica in air filters is a critical aspect of occupational health and safety, aimed at protecting workers from the harmful effects of inhaling crystalline silica particles, which can lead to diseases such as silicosis and lung cancer. The NIOSH 7500 method (NIOSH, 2003) provides a detailed and standardized procedure for the determination of crystalline silica in air samples using X-ray diffraction (XRD). This method involves the collection of air samples on filters, which are then analyzed to identify and quantify the crystalline silica phases, including quartz, cristobalite, and tridymite.&nbsp;XRD is chosen for its high specificity and sensitivity in distinguishing different crystalline forms of silica, making it a reliable analytical technique. The method outlined in NIOSH 7500 requires meticulous sample preparation, including the proper collection and handling of air filters, calibration with known standards, and strict adherence to analytical parameters to ensure accurate and reproducible results. Following the NIOSH 7500 norm and equivalent standards helps ensure the reliable monitoring of workplace air quality, thereby safeguarding workers’ health. The use of XRD in analyzing silica in air filters is an essential component of industrial hygiene and environmental monitoring programs, facilitating the detection and control of hazardous silica exposure in occupational settings.<h4>Instrument and software&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2296">Thermo Scientific™ ARL™ X’TRA Companion X-ray Diffractometer</a> (c.f. Figure 1) is a simple, easy-to-use benchtop XRD instrument for routine phase analysis as well as more advanced applications. The ARL X’TRA Companion XRD uses a θ/θ goniometer (160 mm radius) in Bragg-Brentano geometry coupled with a 600 W X-ray source (Cu or Co). The radial and axial collimation of the beam is controlled by divergence and Soller slits, while air scattering is reduced by a variable beam knife. An integrated water chiller is available on demand. Thanks to the innovative solid state pixel detector (55 x 55 μm pitch), the ARL X’TRA Companion XRD provides very fast data collection and comes with one-click Rietveld quantification capabilities and automated result transmission to a LIMS (laboratory information management system).<h4>Your benefits&nbsp;</h4>The ARL X’TRA Companion XRD provides data perfectly suited to quantify respirable quartz in air filters. Utilizing a calibration curve in a one-click refinement delivers results within minutes, ensuring ease-of-use for operators and reducing training requirements. XRD analysis of air filter samples complies with the NIOSH 7500 standard.

News from LabRulezICPMS Library - Week 11, 2026

How can we make the production of supercapacitors for energy storage more sustainable and replace the traditionally used but toxic solvent NMP (N-methyl-2-pyrrolidone)? According to scientists from CATRIN at Palacký University, the “green” solvents Cyrene and Tamisolve may be a suitable alternative. In an article published in the <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S1385894725130696?via%3Dihub#s0060">Chemical Engineering Journal</a>, they have shown that these solvents can be used in production without reducing the performance of the equipment. They thus offer a path to the next generation of sustainable, high-performance supercapacitors for industrial use.“Supercapacitors are one of the modern technologies for storing electric energy. As sustainable energy storage becomes more prominent, it is essential to replace the hazardous solvents used in the production of supercapacitor electrodes. Our study presents Cyrene and Tamisolve as environmentally friendly alternatives to the toxic solvent NMP, which is traditionally used in production. Both tested solvents enabled the preparation of electrodes that maintain high electrochemical performance while improving environmental compatibility,” said Michal Otyepka, corresponding author of the article.The electrodes were prepared using nitrogen-doped graphene as the active material in combination with two types of binders. The first was a common fluorinated binder (PVDF), which is widely used in industry, including in the manufacturing of battery electrodes. The researchers also tested a fluorine-free binder (PVP), which has a lower environmental impact and is more soluble in environmentally friendly solvents. Using various combinations, they monitored the performance and stability of the electrodes as well as their mechanical resistance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CATRIN_Vedci_z_CATRIN_nabizeji_zelenejsi_cestu_pro_vyrobu_superkondenzatoru_443775296a.jpg" alt="CATRIN: CATRIN researchers offer a “greener” way to make supercapacitors" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CATRIN_Vedci_z_CATRIN_nabizeji_zelenejsi_cestu_pro_vyrobu_superkondenzatoru_443775296a.jpg 245w," sizes="100vw" width="1536" height="768">“The results showed that not only can the alternative solvents Cyrene and Tamisolve fully replace the toxic solvent NMP, but also that the prepared electrodes have the necessary mechanical properties. Their compatibility with both fluorinated PVDF and non-fluorinated PVP binders, together with excellent layer uniformity and electrochemical stability, makes them ideal for use in scalable applications. This is essential for industrial production,” said the publication’s first author, Ivan Dědek.Cyrene, or dihydrolevoglucosenone, is obtained from renewable biomass sources such as cellulose. Tamisolve (N-butyl-2-pyrrolidone) is a substance related to the commonly used NMP, but is more gentle on human health and the environment.Supercapacitor research has been a priority at CATRIN for almost ten years. In addition to developing new active materials, such as the successful nitrogen-doped graphene (SC-GN3), it also focuses on environmentally friendly and industrially feasible manufacturing processes. The replacement of toxic NMP with the “greener” solvents Cyrene and Tamisolve confirms that more sustainable production can go hand in hand with high performance and represents an important step towards industrial implementation.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S1385894725130696?via%3Dihub#s0060">Toward transitioning to green and sustainable supercapacitors</a></h4>Ivan Dědek, Vojtěch Kupka, Veronika Šedajová, Petr Jakubec, Matěj Navrátil, Michal Otyepka&nbsp;Chemical Engineering Journal, 529, 2026, 172220<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.cej.2025.172220">https://doi.org/10.1016/j.cej.2025.172220</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>The rapid advancement of supercapacitor technologies has intensified the demand for sustainable electrode fabrication methods that minimize environmental impact. A major challenge arises from the extensive use of the toxic solvent N-methyl-2-pyrrolidone (NMP), which is subject to increasingly stringent regulatory restrictions. We demonstrate that NMP can be effectively replaced with two green solvents, dihydrolevoglucosenone (Cyrene) and N-butyl-2-pyrrolidone (Tamisolve), without compromising electrochemical performance. Electrode formulations were prepared using nitrogen-doped graphene as the active material, in combination with either polyvinylidene fluoride (PVDF), a widely employed fluorinated binder, or polyvinylpyrrolidone (PVP), a non-fluorinated alternative with improved environmental profile. Optimized coatings exhibited high mass loadings exceeding 6 mg cm−2 while maintaining strong adhesion to current collectors, an often overlooked yet critical parameter for scalable manufacturing. Electrochemical testing revealed that PVDF in Cyrene delivered an energy density of 66.6 Wh kg−1 at a power density of 1.85 kW kg−1, with excellent cycling stability, retaining 91 % of capacitance after 100,000 cycles. PVP in Cyrene provided a more environmentally benign alternative, achieving an energy density of 64.2 Wh kg−1 at 1.80 kW kg−1, with 78 % capacitance retention after 100,000 cycles, thereby highlighting the trade-off between performance and sustainability.

CATRIN researchers offer a “greener” way to make supercapacitors

Article

Application

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

The Czech Advanced Technology and Research Institute (CATRIN) at Palacký University is a cutting-edge scientific hub dedicated to advancing research in the fields of nanotechnology, biotechnology, and biomedicine. At its core, CATRIN boasts outstanding scientific teams, featuring international researchers. We emphasize interdisciplinarity, foster global collaborations, and work to translate our research findings into practical applications.

CATRIN

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Thermo Scientific ARL X900 XRF Spectrometer

Powerful WDXRF spectrometer with optional XRD, dual-loading, and combined sequential/simultaneous analysis for fast, precise results in metals, cement, and mining industries.

The Thermo Scientific™ ARL™ X900 XRF Spectrometer is a robust, next-generation wavelength-dispersive X-ray fluorescence (WDXRF) analyzer with optional integrated XRD capability, tailored for the most demanding industrial environments in metals, cement, and mining industries. It delivers fast, precise elemental and phase composition results with exceptional reliability and uptime.Thanks to its inherently safe "tube above sample" geometry, a large single vacuum chamber, and dual-sample loader, the ARL X900 ensures high throughput and stable long-term operation—even under harsh conditions. It combines simultaneous and sequential WDXRF capabilities with flexible configurations that include up to 32 fixed monochromators and up to two gearless goniometers.<h3>Application Domains</h3><ul><li>Metals: Iron, steel, pig iron, DRI, slags, ferro-alloys, copper/brass/bronze, aluminum alloys (including bath ratio), zinc, tin, nickel, cobalt, titanium, magnesium, super-alloys.</li><li>Cement: Raw meal, clinker, free lime, clinker phases, limestone, slags, refractories, ceramics.</li><li>Mining &amp; Minerals: Rocks, ores, concentrators, general oxides, soils and sediments, fluorspar.</li><li>Other Industries: Glass, ceramics, polymers, contract laboratories.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_X900_XRF_Spectrometer_3_6602834bbd.jpg" alt="Thermo Scientific™ ARL™ X900 XRF Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_X900_XRF_Spectrometer_3_6602834bbd.jpg 158w," sizes="100vw" width="1023" height="1009"><h3>Key Features</h3><ul><li>Combined simultaneous and sequential WDXRF for ultimate speed and analytical flexibility.</li><li>Tube-above-sample geometry protects the X-ray tube from contamination or breakage.</li><li>Single large vacuum chamber provides stable analytical conditions and protects sensitive components.</li><li>5GN+ X-ray tube and high-power generator deliver higher X-ray intensity and lower detection limits.</li><li>Fixed channel monochromators for ultra-fast simultaneous analysis with no moving parts.</li><li>Gearless goniometers enable precise sequential scanning with high durability and no mechanical wear.</li><li>Compact XRD system for phase identification and quantification in a single instrument.</li><li>SCX detectors provide enhanced precision for matrix elements.</li><li>Dual-sample loader allows pre-loading of the next sample, significantly reducing dead time.</li><li>20-position rotary or large XY magazines support unattended operation.</li><li>Automation-ready with integration options for SMS robotic systems.</li><li>Turnkey calibrations with certified reference materials ensure immediate use and reliable results.</li><li>UniQuant™ standardless analysis delivers results of unknown samples within minutes.</li><li>OXSAS™ analytical software offers intuitive operation, process control, batch analysis, and powerful calibration tools.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_X900_XRF_Spectrometer_4_2eae64f7ba.jpg" alt="Thermo Scientific™ ARL™ X900 XRF Spectrometer: Cross-section of the ARL X900 Spectrometer, showing the instrument components that ensure high uptime and stable analytical results" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_X900_XRF_Spectrometer_4_2eae64f7ba.jpg 206w," sizes="100vw" width="1373" height="1042"><h3>Efficiency and Flexibility</h3>By combining fast sequential analysis, high-speed fixed-channel detection, and concurrent sample handling, the ARL X900 optimizes throughput. It minimizes measurement cycle times, making it ideal for high-volume production control, failure analysis, and R&amp;D applications.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_X900_XRF_Spectrometer_5_234ac79d92.jpg" alt="Thermo Scientific™ ARL™ X900 XRF Spectrometer: ARL X900 Spectrometer integrates fixed channels for simultaneous analysis and a goniometer for sequential WDXRF analysis, combining two essential techniques within a single instrument." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_X900_XRF_Spectrometer_5_234ac79d92.jpg 221w," sizes="100vw" width="1474" height="1042"><h3>Automation and Software</h3>With Thermo Scientific™ OXSAS™ software, the ARL X900 supports fully automated, unattended 24/7 operation. Features include:<ul><li>EasyOXSAS interface for streamlined routine workflows.</li><li>Real-time SPC (Statistical Process Control).</li><li>Analytical Assistant and multivariable regression for optimized calibration.</li><li>SCT Manager for tracking control, set-up, and standard samples.</li></ul><h3>Service and Support</h3>Thermo Fisher Scientific provides global service logistics, expert field engineers, and flexible service agreements. Whether it’s during installation, warranty, or post-warranty periods, you benefit from:<ul><li>Increased productivity and uptime.</li><li>Access to expert advice and application support.</li><li>Custom training to fully leverage your instrument’s capabilities.</li></ul>Unlock the power of the ARL X900 Spectrometer and ensure your elemental analysis meets the highest standards of speed, precision, and reliability.

Thermo Scientific ARL 9900 IntelliPower Series

Powerful WDXRF analyzer with optional XRD for real-time elemental and phase analysis of solids. Configurable with up to 32 channels and 3 goniometers for fast, precise process control.

The Thermo Scientific™ ARL™ 9900 IntelliPower Series spectrometer is a powerful and versatile WDXRF analyzer with optional integrated XRD, designed for high-performance, real-time process control in demanding industrial environments. It enables rapid, precise, and fully automated elemental and phase analysis of solid samples such as metals, cement, and minerals.With up to 32 fixed monochromators and one to three gearless goniometers, the ARL 9900 performs both simultaneous and sequential elemental analysis across a wide range—from boron to americium (Z=5–95). It can be enhanced with a compact X-ray diffraction (XRD) module to deliver phase-specific data, such as free lime content, clinker phases, and iron compounds in DRI processes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_9900_Intelli_Power_Series_3_75f234904f.jpg" alt="Thermo Scientific™ ARL™ 9900 IntelliPower Series: Integration of XRF and XRD in the same instrument: one sample, one instrument, one analysis for two techniques." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_9900_Intelli_Power_Series_3_75f234904f.jpg 237w," sizes="100vw" width="1143" height="753"><h3>Applications</h3><ul><li>Metals: iron, steel, aluminum, copper, zinc, nickel, titanium, magnesium alloys, slags, and sinters</li><li>Cement: raw meal, clinker, free lime, clinker phases, limestone, additives</li><li>Mining &amp; Minerals: ores, rocks, beach sands, sediments, industrial minerals</li><li>Other Materials: ceramics, glass, polymers, soils</li><li>By-products: process residues and waste materials</li></ul><h3>Key Features</h3><ul><li>Fully integrated simultaneous and sequential WDXRF analysis in one instrument</li><li>Configurable with up to 24 fixed channels and one or more goniometers for ultra-fast, high-precision analysis</li><li>Rapid and reliable sample introduction system with multiple automation levels</li><li>Wide detection range: from parts per million (ppm) to 100% concentration</li><li>LoVap™ X-ray tube with 50 μm Be window for long-term stability and enhanced performance</li><li>Modular IntelliPower platform available in 1500 W, 2500 W, and 4200 W configurations</li><li>Ultra-low detector gas consumption</li><li>Optional integrated XRD module for qualitative and quantitative phase analysis</li><li>Scalable design to meet evolving analytical requirements</li><li>Factory calibration ensures fast commissioning and immediate operational readiness</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_9900_Intelli_Power_Series_e194c316bb.jpg" alt="Thermo Scientific™ ARL™ 9900 IntelliPower Series" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_9900_Intelli_Power_Series_e194c316bb.jpg 128w," sizes="100vw" width="650" height="795"><h3>X-ray System</h3><ul><li>X-ray tube mounted above the sample: protects the system from fragile or damaged samples</li><li>Thermostatically regulated spectrometer: ensures consistent analytical conditions and excellent measurement stability</li></ul><h3>Fixed Monochromators</h3><ul><li>Up to 32 fixed channel monochromators for full simultaneous operation</li><li>Compact slit-crystal geometry: optimized for low detection limits and rapid analysis of dedicated elements</li></ul><h3>XRF Goniometers</h3><ul><li>Programmable for both quantitative and qualitative analysis</li><li>Moiré fringe technology ensures fast, gearless sequential X-ray spectrometry with excellent angular precision</li><li>SmartGonio: compact system covering F to Am with up to 3 crystals</li><li>Universal goniometer: extended coverage from B to Am with up to 9 crystals and 4 collimators</li></ul><h3>Calibration Options</h3><ul><li>Fully factory-calibrated for a broad range of sample types including: cast irons, steels, brasses, bronzes, copper, aluminum, zinc, tin, magnesium, nickel, titanium, cobalt, ferro-alloys, cement, minerals, slags, limestone, ceramics, glass, soils, sediments, rocks, and polymers</li><li>XRD calibrations available for: free lime, clinker phases (C3S, C2S, C3A, C4AF), amorphous content in clinker, DRI phases, and more</li></ul><h3>Automation</h3><ul><li>Fast and dependable sample introduction with scalable automation</li><li>Compatible with ARL SMS systems for fully automated online process control, including integrated sample preparation</li></ul>

Thermo Scientific Niton XL5 Plus Handheld XRF Analyzer

Confidently perform elemental analysis with the Thermo Scientific™ Niton™ XL5 Plus handheld XRF analyzer; it delivers unprecedented performance even for lightweight elements.

Confidently perform elemental analysis with the Thermo Scientific™ Niton™ XL5 Plus handheld XRF analyzer; it delivers unprecedented performance even for lightweight elements. Identify pure metals and alloys, detect tramp elements, or obtain geochemical data.&nbsp;Industrial businesses rely on the Niton XL5 Plus analyzer for more than just low detection limits. It generates fast results and offers great versatility such as the ability to scan a broad range of materials with a single analyzer.More than 75,000 Niton handheld XRF analyzers have been deployed worldwide since 1994, making them the trusted standard for in-field elemental analysis.<div><h3>⚙️ Features</h3><ul><li>5W X-ray tube</li><li>Proprietary large area drift detector for light element detection (Mg, Al, Si, P, S)</li><li>Lightweight design (2.8 lbs/ 1.3 kg)</li><li>Miniaturized nose</li><li>WiFi enabled</li><li>Macro and micro cameras</li><li>Hot swap battery</li><li>Tilting, color touchscreen</li><li>Directional keys</li><li>Password protected security</li><li>IP54 certified (splash/dust proof)</li></ul><h3>🧪 Applications</h3><ul><li>Verification of metals and alloys in manufacturing operations</li><li>Non-destructive field inspections for positive material identification</li><li>Point-and-shoot sorting at scrap recycling operations</li><li>Coating thickness measurements for single or binary metal layers</li><li>Precious metal assay of bullion and jewelry</li><li>Real-time geochemical analysis for mining exploration</li><li>On-site heavy metal screening of polluted soils</li><li>Screening of hazardous substances in consumer goods</li><li>Custom applications on demand</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Niton_XL_5_Plus_Handheld_XRF_Analyzer_2_2967c6cd9a.jpg" alt="Thermo Scientific™ Niton™ XL5 Plus Handheld XRF Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Niton_XL_5_Plus_Handheld_XRF_Analyzer_2_2967c6cd9a.jpg 156w," sizes="100vw" width="650" height="650"><h3>📏 Specifications</h3><ul><li>Certifications/Compliance: CE, RoHS, FCC, Industry Canada, Safety to IEC 61010-1:2010</li><li>Data Entry:<ul><li>Touchscreen keyboard</li><li>User customizable data entry</li><li>Optional wireless remote barcode reader</li></ul></li><li>Data Storage: 512 MB internal system memory / 16 GB industrial grade storage; Stores approximately 130,000 readings with spectra (fewer if macro and micro images are saved)</li><li>Data Transfer: WiFi, USB-c</li><li>Dimensions (L × W × H): 9.54 × 8.19 × 2.67 in. (24.23 × 20.8 × 6.78 cm)</li><li>Display Type: Tilting, color, resistive touchscreen display</li><li>Global Positioning System: Internal GPS and optional external GPS (via Bluetooth); GPS data are included with the sample information. NOTE: The GPS function is an optional feature.</li><li>Languages: English, Chinese, Spanish, Portuguese, Russian, Japanese, German, Korean, French, Turkish, Italian</li><li>Libraries: Default alloy libraries based on SAE, AISI, ASTM, AA, DIN, GB standards. Users may create, clone and edit libraries.</li><li>Licensing: Varies by region. Contact your local distributor.</li><li>Operating Environment:<ul><li>Temperature: 0°C to 50°C (external fan recommended when ambient temperature is greater than 33°C)</li><li>Humidity: 10% to 90% relative humidity non-condensing</li></ul></li><li>Operating System: Linux</li><li>Optional Accessories:<ul><li>Portable test stand</li><li>Mini test stand</li><li>Desk/wall holder</li><li>Hotwork stand off</li><li>Soil guard</li><li>Belt holster</li><li>Bluetooth printer</li></ul></li><li>Power Consumption: 12V lithium-ion battery, or 12V DC, 3A, 3.6W power supply. Hot swap functionality keeps analyzer powered during battery replacements.</li><li>Security Features: Password-protected user security</li><li>Software: Support software: NitonConnect PC software</li><li>Spot Size:<ul><li>Standard: 8mm collimation</li><li>Optional: 3mm small-spot collimation</li></ul></li><li>Standard Accessories:<ul><li>Locking shielded carrying case</li><li>Two (2) lithium-ion battery packs</li><li>One (1) 110/220 VAC battery charger/AC adapter</li><li>Check samples</li><li>Safety lanyard</li><li>PC connection cable (USB)</li></ul></li><li>System Details: Built-in standardization and health check verify system integrity and operating conditions</li><li>Type: XL5 Plus Handheld XRF Analyzer</li><li>Weight (English): 2.8 lb. with battery</li><li>Weight (Metric): 1.3 kg with battery</li><li>X-Ray Source Type:<ul><li>X-ray tube: Ag anode (6–50kV, 0–500µA, 5W max)</li><li>Filter: Six (6) position filter wheel for enhanced spectral range coverage</li><li>Current: Dynamically adjustable current for optimal sensitivity on every analysis</li></ul></li><li>Detector Type: High count rate, high resolution, extra large area silicon drift detector (11µm graphene window). Detector ProGuard protection included.</li><li>Unit Size: Each</li></ul><h3>Which analyzer for your application?</h3><figure class="image"><img style="aspect-ratio:1024/1102;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Niton_XRF_Analyzer_e7e7a24b10.jpg" alt="Thermo Scientific™ Niton™ handheld XRF Analyzers - Niton handheld XRF analyzers are built for rugged use and deliver rapid, lab-quality results" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Niton_XRF_Analyzer_e7e7a24b10.jpg 145w," sizes="100vw" width="1024" height="1102"></figure><blockquote><h3>Helpful links</h3><ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-xrf-analyzer-selection-guide.html">Which XRF analyzer is right for me?</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-xrf-analyzer-rental-leasing.html">Should I rent or lease this product?</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/xrf-radiation-safety-training.html">Where can I get radiation safety training?</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/spectroscopy-elemental-isotope-analysis-learning-center/elemental-analysis-information/xrf-technology.html">What is XRF Technology?</a></li><li>What are the applications for this handheld XRF analyzer?<ul><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/portable-scrap-metal-recycling-analysis.html">Scrap Metal Recycling</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/portable-manufacturing-metal-fabrication-analysis.html">Manufacturing and Metal Fabrication</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/positive-material-identification-oil-gas.html">Positive Material Identification</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-mining-exploration-solutions.html">Mining and Exploration</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-metal-manufacturing-inspection-recycling-solutions/portable-precious-metals-jewelry-analysis.html">Precious Metals</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/us/en/home/industrial/spectroscopy-elemental-isotope-analysis/portable-analysis-material-id/portable-consumer-safety-regulatory-solutions.html">Consumer Safety &amp; Regulatory</a></li></ul></li></ul></blockquote></div>

Thermo Scientific ARL 9900 Total Cement Analyzer

Combines XRF and XRD in one instrument for fast and precise analysis of cement materials. One sample, one analysis – full chemical and phase information.

Achieve excellent process control and save fuel in your cement plant with both chemical and phase analysis in one simple operation. The Thermo Scientific™ ARL™ 9900 Total Cement Analyzer combines X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) technologies for a more complete characterization of any given crystalline sample.&nbsp;Various compounds can be controlled like quartz in raw meal, hot meal, free lime in clinker, clinker phases, and additions in cement (e.g. limestone, GBFS, pozzolan) or even clinker content in cement. Clinker phase analysis ensures consistent clinker quality, which is the key to high-performance concrete.The ARL 9900 Total Cement Analyzer provides fast process monitoring during the critical phases of cement manufacturing. It combines:<ul><li>XRF analysis – determines elemental composition</li><li>XRD analysis – provides mineralogical information</li></ul>Together, they ensure the integrity of the final product.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_9900_Intelli_Power_Series_3_75f234904f.jpg" alt="Thermo Scientific™ ARL™ 9900 Total Cement Analyzer: Integration of XRF and XRD in the same instrument: one sample, one instrument, one analysis for two techniques." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_9900_Intelli_Power_Series_3_75f234904f.jpg 237w," sizes="100vw" width="1143" height="753">Traditionally, both analyses required two separate X-ray instruments, leading to higher costs. Thanks to the compact integrated XRD system, both techniques are now included in one instrument, offering key benefits:<ul><li>Only one sample introduction – fast, simple, reliable</li><li>Single user interface for both techniques</li><li>Combined elemental and phase results in one report</li><li>Minimized floor space</li><li>Replaces two instruments</li><li>Rapid and precise analysis of solid samples</li></ul>IntelliPower: choose power level as needed – 1200W, 2500W, 3600W or 4200W Advanced software: instant result reporting after analysis Easy upgrades for future analytical needs<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_9900_Total_Cement_Analyzer_8c67ede30b.jpg" alt="Thermo Scientific™ ARL™ 9900 Total Cement Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_9900_Total_Cement_Analyzer_8c67ede30b.jpg 165w," sizes="100vw" width="1626" height="1536"><h3>X-ray System</h3><ul><li>X-ray tube mounted above the sample – prevents damage (e.g. from fragile pellets)</li><li>Thermostatically regulated spectrometer – precise, sensitive, and stable measurements</li></ul><h3>Fixed Monochromators</h3><ul><li>Compact slit-crystal geometry – detects trace elements</li><li>Simultaneous multi-element analysis – for faster response</li></ul><h3>XRF Goniometers</h3><ul><li>Programmable for quantitative or qualitative element analysis</li><li>High-speed sequential X-ray spectrometry using Moire fringe technology</li><li>Handles nonroutine element analysis</li></ul><h3>Automation</h3><ul><li>Fast and reliable sample introduction, variable automation levels</li><li>Can be linked to automatic sample prep systems for online process control</li></ul>

Thermo Scientific ARL SMS-Omega XRF Instrument

Boost production efficiency with fully automated XRF analysis. The ARL OPTIM'X with SMS-Omega ensures high-quality results with unattended prep, rapid WDXRF, and compact design.

Keep up with production demands with automated XRF analysis. When different types of material have to be processed in parallel, the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL OPTIM'X™ WDXRF Spectrometer</a> with the Thermo Scientific™ ARL™ SMS-Omega XRF Instrument is the solution. Automatic sample preparation and handling without user intervention, combined with rapid analysis, provide high-quality results. This innovative solution has a compact footprint of less than 1 m², so it can be installed in centralized laboratories or on production shop floors, wherever fully automated industrial production control is needed.This cost-effective system is a unique combination of Thermo Scientific XRF and automation technology for fully automated sample preparation and analysis of one material type.<h3>Main Features</h3><ul><li>Unattended instrument monitoring and integrated audit trail functions</li><li>Sample handling arm equipped with a suction device (metals version) or a gripper (oxide version) loads samples for analysis.</li><li>Samples processed under strict identical and reproducible conditions</li><li>Fixed circular magazine</li><li>XRF functionality provided by the flexible and compact <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL™ OPTIM'X WDXRF </a>Instrument</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg 233w," sizes="100vw" width="650" height="435"><h3>Features of the OPTIM'X WDXRF Instrument</h3><ul><li>WDXRF platform with sequential and/or simultaneous capabilities</li><li>Configurable to cover all elements from fluorine (F) to uranium (U) in sequential mode</li><li>Fast analysis of solids, liquids and loose powders with superior spectral resolution</li><li>No water cooling or gas supply required (depending on configuration)</li><li>Closely coupled optics for increased intensity (50% higher than conventional geometry)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg" alt="Thermo Scientific™ ARL™ OPTIM'X WDXRF Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg 94w," sizes="100vw" width="650" height="1077"><h3>Features of the Fixed Circular Magazine</h3><ul><li>Eight positions for storing reference standards</li><li>Allows occasional manual introduction of prepared samples</li><li>One additional position dedicated to filing production samples following analysis</li><li>The complete system can also be supplied within a Thermo Scientific™ ARL™ QuantoShelter container for in situ analysis closer to the process.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg 216w," sizes="100vw" width="650" height="471">

Thermo Scientific ARL SMS-2300 Robotics-Based Automation for OES or XRF

Thermo Scientific™ ARL™ SMS-2300 enables fast, reproducible, and unattended OES/XRF analysis to optimize steel production and meet the strictest quality standards.

<h4>Meet stringent steel specifications while increasing efficiency and lowering production costs.</h4>The Thermo Scientific™ ARL™ SMS-2300 Robotics-Based Automation for OES or XRF is an automated quality control solution to optimize your steel production operation. With the high-performance ARL SMS-2300 system, even complex samples are prepared and analyzed under reproducible conditions without operator intervention, eliminating human variables and subjective factors. 👉 Result: Increased output, reliable results, and reduced costs.<h3>🔧 ARL SMS-2300 Automation for OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended 24/7 operation of:<ul><li>ARL™ 4460</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">ARL™ iSpark</a> / <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977">iSpark Plus OES</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900 XRF</a></li></ul><h3>✅ Main Features</h3><ul><li>Easy integration into fully automatic laboratories</li><li>Installed in ARL QuantoShelter, close to production process</li><li>Parallel tasking:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time</li></ul></li><li>High throughput with:<ul><li>Automatic sample preparation</li><li>Haas Mini Mill + ARL™ PrepControl™ + EasyPrep™ software</li></ul></li><li>Direct access to Haas Mini Mill for faster ferrous sample processing</li><li>Factory-configured and customized</li><li>Compact chassis, simple installation, and integrated electronics</li><li>High reliability, rapid ROI, and fast result availability</li><li>Frees lab personnel from routine tasks</li><li>ISO 9001 compliant manufacturing and maintenance</li></ul><h3>🚀 Advanced Technology</h3><ul><li>Fanuc industrial robot</li><li>OXSAS analytical software</li></ul>

Thermo Scientific ARL SMS-3300 Automation for Single or Twin OES or XRF

Thermo Scientific™ ARL SMS-3300 enables fully automated operation of one or two OES or XRF spectrometers, enhancing lab efficiency in industrial environments.

Drive process control laboratory efficiencies in the metals, mining and cement industries with the Thermo Scientific™ ARL™ SMS-3300 Automation for Single or Twin OES or XRF, a complete laboratory workflow automation solution. The automation of single or multiple spectrometers and preparation machines with the ARL SMS-3300 system offers:👉 Reduced sample analysis cost, 👉 Increased sample throughput, 👉 Better reproducibility, and 👉 Higher quality resultsfor users requiring more comprehensive and integrated automation solutions in the metals, mining and cement industries.<h3>🔧 ARL SMS-3300 – Automation for Single or Twin OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended, 24/7 operation of:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">Thermo Scientific™ ARL™ iSpark </a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977"> iSpark Plus </a>(Optical Emission Spectrometers)</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">Thermo Scientific™ ARL™ 9900</a> (X-ray Fluorescence Spectrometer)</li></ul><h3>✅ Main Features</h3><ul><li>Designed for easy integration into fully automatic laboratories</li><li>Can be mounted in Thermo Scientific ARL QuantoShelter, close to the production process</li><li>Parallel task execution:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time by the spectrometer, independently of the robot</li></ul></li><li>Direct access to milling machine for reduced processing times of ferrous samples</li><li>Higher throughput with:<ul><li>Automatic sample preparation</li><li>ARL™ PrepControl™ system + ARL™ EasyPrep™ software</li></ul></li><li>Factory configured and customized</li><li>Compact chassis and simple installation</li><li>Integrated electronics</li><li>Improved analysis reliability and quality</li><li>Very rapid payback</li><li>Faster result availability</li><li>Qualified lab personnel freed from routine tasks</li><li>Manufactured and maintained according to ISO 9001-2000 procedures</li></ul><h3>🚀 Advanced Technology</h3><ul><li>State-of-the-art Fanuc industrial robot</li><li>OXSAS analytical software</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg" alt="Thermo Scientific™ ARL SMS-3300 Automation for Single or Twin OES or XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg 245w," sizes="100vw" width="650" height="366">

Thermo Scientific ARL SMS-3500 Automation for Twin OES or XRF

The ARL SMS-3500 automates two OES or XRF spectrometers with smart sample flow management for fast, efficient, and continuous production control.

Drive process control laboratory efficiencies in the metals and mining industries with the Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF, a complete laboratory workflow automation solution. Primary metals producers' laboratories typically run two fully duplicate and separate spectrometry lines to assure fast response times when several urgent samples must be processed simultaneously. 👉 The ARL SMS-3500 system is an affordable alternative.The automation of multiple spectrometers and preparation machines with the ARL SMS-3500 system offers:<ul><li>Reduced sample analysis cost</li><li>Increased sample throughput</li><li>Better reproducibility</li><li>Higher quality results</li></ul>for users requiring more comprehensive and integrated automation solutions in the metals and mining industries.The ARL SMS-3500 Automation for Twin OES or XRF simplifies sample handling by providing:<ul><li>a single introduction location for all samples</li><li>a magazine storage function to free the introduction 👉 This reduces response times, increases sample processing cadence, and improves the availability of automatic sample preparation in highly critical production control environments.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg" alt="Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF - 2.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg 217w," sizes="100vw" width="650" height="469"><h3>✅ Main Features</h3><ul><li>No need for time-consuming electro-mechanical transfer systems – the SMS-3500 robot moves samples between components within seconds</li><li>Simplified operation and reduced system complexity for easier maintenance and servicing</li><li>Single interface screen for all sample tracking and automation functions</li><li>Unified registration and introduction point for all production samples, with automated routing to the appropriate system components</li><li>Support for two sample preparation machines:<ul><li>Reduces response times</li><li>Increases processing cadence</li><li>Improves automatic sample preparation availability</li></ul></li><li>Operator workload is reduced – the system manages samples by priority and availability of resources<ul><li>Includes internal sample storage to free the introduction point immediately</li></ul></li><li>Each instrument can be used offline for manual tasks without interrupting automated operation</li><li>Uses the same analytical software for XRF and OES</li><li>Automation is based on proven ARL SMS software</li></ul><h3>🔧 Recommended for:</h3><ul><li>Iron and steel applications</li><li>High alloy, stainless steel, copper, brass, and bronze applications</li><li>Aluminum or fire assay applications</li></ul>

Thermo Scientific MEP-300 Upgrade Package for MSA and AnStat

Streamline slurry analysis with the Thermo Scientific™ MEP-300 probe—no liquid nitrogen needed. Replaces MEP/MEP-200 and features SDD technology for reliable, high-performance XRF results.

<h4>Enhance XRF Slurry Analysis with the Thermo Scientific™ MEP-300 Multi-Element Probe – No Liquid Nitrogen Required</h4>Streamline elemental analysis of slurries with the Thermo Scientific™ MEP-300 Multi-Element Probe, designed to eliminate the need for liquid nitrogen while improving performance and reliability. Developed as a direct replacement for earlier MEP and MEP-200 immersion probes used in <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2027">AnStat </a>and <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2004">MSA</a> X-ray analyzer systems, the MEP-300 leverages advanced Silicon Drift Detector (SDD) technology for superior results in demanding industrial environments.<h3>Why Choose the MEP-300 Probe?</h3><h4>Advanced SDD Technology</h4><ul><li>Operates without cryogenic cooling</li><li>Delivers lower detection limits and improved analytical accuracy</li><li>Achieves higher count rates, reduced background, and wider field of view</li><li>Demonstrated stability under shock and vibration, ideal for on-line industrial use</li><li>No special storage or handling required</li></ul><h4>Occupational Health &amp; Safety</h4><ul><li>No liquid nitrogen, eliminating associated hazards</li><li>Enhanced radiation safety with:<ul><li>Automatic source retraction on window rupture or probe lift</li><li>Fail-safe, spring-loaded design to withdraw the source on power loss</li><li>High-visibility beacon for status and alarm indication</li></ul></li></ul><h4>Optimized Maintenance &amp; Operations</h4><ul><li>Zero ongoing cost for liquid nitrogen</li><li>Lower cost of spare parts</li><li>Field-repairable detector — no need to return to the factory</li><li>Easy-to-replace modules and cable assemblies</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_MEP_300_Upgrade_Package_for_MSA_and_An_Stat_87564bbe7b.jpg" alt="Thermo Scientific MEP-300 Upgrade Package for MSA and AnStat." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_MEP_300_Upgrade_Package_for_MSA_and_An_Stat_87564bbe7b.jpg 192w," sizes="100vw" width="1374" height="1116"><h3>Specifications</h3><ul><li>Air Requirements:&nbsp;<ul><li>Instrument Air: ANSI ISA-S7 0 0-1996 (clean and dry to 0.1 microns with dew point &lt;2°C)</li><li>Air Pressure: 550 kPa nominal – 1000 kPa maximum</li></ul></li><li>Certifications/Compliance: CE, ICES 001, CSA, FCC Part 15B and RCM AS/NZS CISPR11</li><li>Electrical Requirements:&nbsp;<ul><li>Three Phase 48 to 62 Hz. Max 2.5kVA Neutral not required.</li><li>Identical power requirements to previous generation products.</li><li>Any of the standard three phase voltages used in the world mining industry in the range 380–600 Volts AC may be factory or field selected.</li><li>Variation should not exceed ±10% of the nominal voltage selected.</li></ul></li><li>Operating Temperature:&nbsp;<ul><li>Ambient -10°C to +55°C (measured at enclosure surface temperature, temperature to not exceed 55°C)</li><li>Process Fluid: 0°C to 45°C, Check with factory for higher temperature options</li></ul></li><li>Type: MEP-300 Upgrade Package for MSA and AnStat</li><li>Unit Size: Each</li></ul>

Products from category XRF - page 1

Related content

CATRIN researchers offer a “greener” way to make supercapacitors

News from LabRulezICPMS Library - Week 11, 2026

Basic instructions for participants in a proficiency testing scheme