This study systematically compares four widely used lysosome enrichment strategies, including density gradient separation, magnetic bead isolation, filter-based enrichment, and subcellular fractionation. Using the THP-1 monocytic cell line, the methods were evaluated for lysosome yield, purity, membrane integrity, reproducibility, scalability, and contamination through complementary analytical techniques and proteomics.The results showed that gradient- and bead-based methods achieved the highest lysosomal purity, while subcellular fractionation yielded larger numbers of lysosomes but with greater contamination and variability. Filter-based enrichment enabled rapid processing but recovered mainly nonintact lysosomes. The findings provide practical guidance for selecting lysosome isolation methods in both research and clinical applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05792">Benchmarking Lysosome Enrichment Methods: A Guide for Research and Clinical Translation</a></h4>Anniek L. de Jager, Sara Kassem, Louis Alesha, Brigitta A.E. Naber, Inge F. de Laat, Bas de Mooij, Kyra van der Pan, Erik Bos, Roman I. Koning, Jacques J.M. van Dongen*, Cristina Teodosio*, and Paula Díez*Anal. Chem. 2026, 98, 6, 4585–4600<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.analchem.5c05792">https://doi.org/10.1021/acs.analchem.5c05792</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Since their discovery by De Duve et al. <a href="javascript:void(0);">(1)</a> in 1955, lysosomes have emerged as dynamic organelles critical to cellular homeostasis, regulating processes from nutrient sensing to plasma membrane repair. <a href="javascript:void(0);">(2−5)</a> These acidic, enzyme-packed vesicles <a href="javascript:void(0);">(6,7)</a> are now acknowledged as central players in pathologies far beyond their classical association with lysosomal storage disorders (LSDs). Dysfunctional lysosomes are involved in neurodegenerative diseases (e.g., Alzheimer’s, Parkinson’s), <a href="javascript:void(0);">(8−10)</a> cancer metastasis, <a href="javascript:void(0);">(11−13)</a> and cardiovascular disorders. <a href="javascript:void(0);">(14,15)</a> At the same time, lysosomal proteins like GBA1 and LAMP2 serve as biomarkers and therapeutic targets. <a href="javascript:void(0);">(16−19)</a> Despite their clinical significance, a major challenge in lysosomal research persists since lysosomes constitute less than 5% of cellular volume, <a href="javascript:void(0);">(20,21)</a> requiring precise enrichment for accurate analysis in diagnostic and therapeutic development. <a href="javascript:void(0);">(22,23)</a>Current lysosome isolation methods, including density gradient-based separation, <a href="javascript:void(0);">(24−28)</a> filter-based size exclusion approaches, <a href="javascript:void(0);">(29)</a> magnetic particle phagocytosis, <a href="javascript:void(0);">(30−33)</a> subcellular fractionation (SCF), <a href="javascript:void(0);">(34)</a> and immunoprecipitation strategies, <a href="javascript:void(0);">(35,36)</a> vary widely in yield, purity, structural integrity, and practicality. For instance, density gradient-based methods, which often use Percoll <a href="javascript:void(0);">(37)</a> or sucrose, <a href="javascript:void(0);">(38)</a> while well-established, user-friendly, and cost-effective, coisolate organelles with similar densities, such as endosomes, peroxisomes, and mitochondria, <a href="javascript:void(0);">(39,40)</a> and can be time-consuming, potentially affecting lysosomal protein integrity. Conversely, filter-based size exclusion methods isolate lysosomes based on their size, <a href="javascript:void(0);">(29)</a> offering shorter processing times and straightforward protocols. Nevertheless, these approaches may result in cross-contamination, as various cellular vesicles share similar sizes. <a href="javascript:void(0);">(20,21)</a> Magnetic bead-based methods (e.g., superparamagnetic iron oxide nanoparticles, SPION) involve the endocytic uptake of magnetic beads, <a href="javascript:void(0);">(35,41)</a> offering specificity but altering lysosomal physiology through forced phagocytosis, which hampers functional assays, such as in cancer drug screening. <a href="javascript:void(0);">(42,43)</a> Finally, SCF, which employs sequential lysis steps to enrich specific organelles, including lysosomes, <a href="javascript:void(0);">(34,44)</a> is a rapid, easy-to-use, and cost-effective method; however, significant cross-contamination is linked to this method. <a href="javascript:void(0);">(34,44)</a> Such trade-offs are rarely addressed in single-modality studies, leaving clinicians and researchers without clear guidance for protocol selection. This gap is particularly critical in translational contexts, where diagnostic laboratories that prioritize high-purity lysosomes for biomarker discovery require protocols different from those of therapeutic teams that need lysosomes for drug efficacy testing.Previous comparative studies, such as the proteomic analysis by Singh et al., <a href="javascript:void(0);">(35)</a> have provided valuable insights but primarily focused on yield and purity assessments via proteomic markers, overlooking several key parameters with potentially relevant impacts in translational and clinical applications. Critically, these studies often omit functional and practical metrics: for instance, they typically do not evaluate lysosomal membrane integrity, which is vital for enzyme activity and therapeutic testing, nor do they consider the scalability and feasibility of protocols for contexts where only limited patient samples are available or the potential presence of isolation artifacts. This omission of practical, multimodal assessment represents a critical gap that prevents researchers from selecting a protocol optimized for specific clinical goals.Our study seeks to address these limitations by employing a multimodal framework that evaluates four widely used lysosome isolation methods across several metrics that are critical for clinical applications. We systematically assessed the yield and reproducibility of each method, factors that are essential for biobanking and high-throughput diagnostic workflows. We also examined organelle purity, crucial for avoiding false positives in proteomic biomarker screenings, together with lysosomal membrane integrity, an important consideration for functional studies and drug testing. Finally, we considered the scalability of each method, ensuring that our findings are relevant for studies involving rare or precious patient-derived cells together with the cost and processing time of each technique. Thus, by integrating nanoparticle tracking analysis (NTA), spectral flow cytometry, transmission electron microscopy (TEM), and mass spectrometry (MS)-based proteomics, our study revealed distinct advantages for each method depending on the intended application. With this comprehensive benchmark, we bridged a critical gap between fundamental lysosome biology and clinical implementation, guiding researchers and clinicians in the selection of the most appropriate isolation strategies tailored to their diagnostic or therapeutic goals.<h3>Experimental Section</h3><h4>Liquid Chromatography–Tandem Mass Spectrometry Analysis (LC–MS/MS)</h4>For liquid chromatography–tandem mass spectrometry (LC–MS/MS) studies, a total of 15 μg of proteins were reduced with 10 mM DTT at 45 °C for 30 min, followed by alkylation with 40 mM 2-iodoacetamide (IAA, Sigma-Aldrich) at RT for 30 min. This last reaction was quenched with 20 mM DTT, and protein digestion and peptide recovery were performed using hydrophilic and hydrophobic beads (Sera-Mag Carboxylate-Modified Magnetic Particles, Cytiva, Marlborough, MA/USA) according to the Single-Pot Solid-Phase-enhanced Sample Preparation (SP3) method. <a href="javascript:void(0);">(46,47)</a> In short, samples were incubated twice with beads (1:10 (w/w) protein:bead ratio) in 70% acetonitrile (ACN) for 18 min at RT. After incubation, bead-bound proteins were retained by using a DynaMag-PCR Magnet (Thermo Fisher), and contaminants were washed away three times with 80% ethanol (Sigma-Aldrich). Proteins were digested using a Trypsin/LysC mix (1:25 (w/w) enzyme:protein ratio, Promega, Madison, WI/USA) in 50 mM ammonium bicarbonate at RT overnight. Beads were then washed twice with ACN, after which peptides were eluted in 2% (v/v) dimethyl sulfoxide (DMSO, Thermo Fisher), lyophilized in a freeze-dryer, and stored at −20 °C. Samples were then tagged using the tandem mass tag (TMT) labeling kit (TMTpro 16plex tags, Thermo Fisher) by resuspending the lyophilized peptides in 40 mM HEPES pH 8.4 and labeling with the TMT tags at a 1:5 (w/w) sample:tag ratio for 1 h at RT. The labeling reaction was quenched with 5% hydroxylamine. TMT-labeled lysosome samples were pooled, lyophilized in a freeze-dryer, and stored at −20 °C until LC–MS/MS analysis.<h4>Mass Spectrometry Data Acquisition and Analysis</h4>MT-labeled peptides were dissolved in solvent A (water/formic acid (FA), 100/0.1 (v/v)) and analyzed by online C18 nano-HPLC MS/MS, coupling an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=3&amp;search=UltiMate+3000">UltiMate 3000 gradient HPLC system</a> (Thermo Fisher) and an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/401">Orbitrap Exploris 480 mass spectrometer</a> (Thermo Fisher). A total of 12 fractions were injected onto a precolumn (300 μm × 5 mm; PepMap100 C18 5 μm, Thermo Fisher) equilibrated with solvent A and eluted via a homemade analytical nano-HPLC column (50 cm × 75 μm; ReproSil-Pur C18-AQ 1.9 μm) using solvent B (80/20/0.1 (v/v/v) ACN/water/FA) in a gradient from 5 to 30% in 160 min. The nano-HPLC column was drawn to a tip of ∼5 μm and functioned as an electrospray needle. A Sonation PRSO-V2 column oven was used to maintain the analytical column temperature at 50 °C. The MS1 spectra were recorded in the Orbitrap at a mass-to-charge ratio (m/z) range of 350–1,600, a resolution of 120,000, a maximum injection time of 50 ms, and automatic gain control (AGC) at standard. Dynamic exclusion was applied after n = 1 with an exclusion duration of 45 s and a mass tolerance of 10 ppm. Charge states 2–5 were included. Precursors for MS2 were selected using a TopSpeed method of 3 s at a resolution of 45,000 and fragmented by high-energy collision-induced dissociation (HCD) at a normalized collision energy (NCE) of 36%, with an AGC at 200 and the maximum injection time set to auto. The isolation window for MS/MS was 1.2 Da.Raw data files were converted to the peak list by using <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1782">Proteome Discoverer v2.4</a> (Thermo Fisher), followed by protein identification employing the UniProtKB database (Homo sapiens, 20,596 entries) using Mascot v2.2.07 (Matrix Science Inc., Boston, MA/USA) with the following parameters: precursor and fragment mass tolerances of 10 ppm and 0.02 Da, respectively; TMT16plex on N-term and Lys as fixed modifications; oxidation on Met and acetylation of N-term as variable modifications; and full tryptic digestion (no P rule) with up to 2 missed cleavages. A false discovery rate (FDR) of 1% was set for peptide spectrum matches (PSMs), peptides, and proteins.The MS data have been deposited via the PRIDE partner repository to the ProteomeXchange Consortium with the identifier PXD040003.<h3>Results</h3><h4>Quantification and Size Distribution of Isolated Vesicle Fractions</h4>To assess the yield and size distribution of vesicles isolated by different methods, nanoparticle tracking analysis (NTA) was employed. The SCF procedure yielded the highest median number of vesicles per cell (2,356.3 ± 7,461.7; median ± range), followed by gradient-based (1,630.2 ± 1632.3), filter-based (228.2 ± 265.6), and bead-based isolation (27.8 ± 35.2). Both filter- and bead-based approaches resulted in significantly lower yields compared to SCF (p-value = 0.002 and p-value &lt;0.0001, respectively), and the gradient-based method yielded significantly more vesicles than the bead-based approach (p-value = 0.002; <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05792#fig1">Figure 1</a>A).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2026_98_6_4585_4600_Figure_1_Quantification_and_size_analyses_of_isolated_vesicles_2d5c120f05.jpeg" alt="Anal. Chem. 2026, 98, 6, 4585–4600: Figure 1. Quantification and size analyses of isolated vesicles. A) Quantification of isolated vesicles per cell, shown as median with range. Circles represent technical replicates. B) Size distribution of isolated vesicles (in nm), displaying average D10 (red), D50 (blue), and D90 (gray), depicted as median with range. Circles represent technical replicates. C–F) Particle distribution plots showing mean concentration at specific sizes; each line represents a technical replicate. For each method, six technical replicates are shown, except for SCF, which includes 12 replicates. SCF, subcellular fractionation. Statistical significance: p &lt; 0.05 and FDR 5%. For statistical analysis, the nonparametric Kruskal–Wallis test was used and corrected for multiple comparisons using the method of Benjamini and Hochberg." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2026_98_6_4585_4600_Figure_1_Quantification_and_size_analyses_of_isolated_vesicles_2d5c120f05.jpeg 126w," sizes="100vw" width="1383" height="1708">Median vesicle size (D50) was comparable across all methods: 159.5 ± 17.2 nm (gradient-based), 169.9 ± 82.7 nm (filter-based), 168.9 ± 42.4 nm (bead-based), and 150.0 ± 55.6 nm (SCF). Similarly, decile 10 (D10) values were consistent, ranging from 87.1 ± 87.3 nm (SCF) to 108.2 ± 3.1 nm (gradient-based). However, filter-based isolation led to higher size heterogeneity of the isolated particles, capturing significantly larger vesicles at the upper end (D90:308.5 ± 110.7 nm) compared to SCF (244.9 ± 112.6 nm, p-value = 0.005), while gradient- and bead-based methods showed intermediate D90 values (250.8 ± 31.7 nm and 273.0 ± 45.9 nm, respectively; <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05792#fig1">Figure 1</a>B). Notably, greater intra-assay variation in concentration and size distribution was observed with filter-based and SCF methods compared to the other approaches (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05792#fig1">Figure 1</a>C–F).<h4>Morphology of the Isolated Fractions</h4>Transmission electron microscopy (TEM) of the isolated fractions confirmed the presence of heterogeneously sized vesicles, in line with the size distributions obtained by NTA. Notably, only the gradient-based method yielded relatively pure vesicle preparations. In contrast, filter-based and SCF methods displayed contamination with cellular debris or protein aggregates, while the bead-based approach was associated with the presence of lipid structures (<a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05792#fig2">Figure 2</a>).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2026_98_6_4585_4600_Figure_2_Transmission_electron_microscopy_TEM_of_isolated_fractions_f14ddbe180.jpeg" alt="Anal. Chem. 2026, 98, 6, 4585–4600: Figure 2. Transmission electron microscopy (TEM) of isolated fractions. Panels A–D show TEM images of the four isolated fractions. Insets display magnified views of the regions outlined in black squares. Black arrows indicate identified representative isolated vesicles, and white arrows denote areas of contamination." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2026_98_6_4585_4600_Figure_2_Transmission_electron_microscopy_TEM_of_isolated_fractions_f14ddbe180.jpeg 145w," sizes="100vw" width="1263" height="1361"><h3>Conclusion</h3>This study provides a systematic benchmarking of four lysosome isolation strategies, revealing inherent trade-offs among yield, integrity, purity, and reproducibility driven by their underlying separation principles. No single method is universally optimal; instead, the method selection must be guided by the intended downstream application. By integrating complementary analytical approaches in a clinically relevant and challenging monocytic model, our work offers a practical framework to support the informed selection of lysosome enrichment strategies, facilitating reliable lysosomal analyses in both research and translational settings.</div>

Benchmarking Lysosome Enrichment Methods: A Guide for Research and Clinical Translation

A Method for the Detection of Tire Wear Microplastics in Zebrafish Guts by Laterally Resolved LA-ICP-MS-Based Elemental Fingerprinting and Chemometrics

This leaflet is intended to help participants in quantitative proficiency testing (PT) schemes to better understand the performance assessment made by the PT provider [1-4].<h3>Performance assessment parameters&nbsp;</h3><h4>Assigned value&nbsp;</h4>In order to assess individual performances, the results reported by participants are compared to the value assigned by the PT provider (xpt). ISO 13528 [1] suggests five different ways to obtain xpt (Figure 1). In this context, the design of the PT scheme must reflect the objectives of the scheme, comparing results either to a predetermined xpt (independent from the participant results), or to a value derived from the reported results. The PT provider is responsible for defining xpt , taking into account the advantages and disadvantages of the various possibilities when establishing metrological traceability or estimating the uncertainty of the assigned value, u(xpt).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_1_e5ef5d1f9c.jpg" alt="Eurachem - Figure 1 Options for obtaining the assigned value, Xpt" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_1_e5ef5d1f9c.jpg 245w," sizes="100vw" width="640" height="382"><h4>Uncertainty of the assigned value&nbsp;</h4>The uncertainty of the assigned value u(xpt) can be estimated in at least five different ways [1], each corresponding to the value assignment strategy illustrated in Figure 1. The different uncertainty evaluation methods are listed in Figure 2. This uncertainty can be reported as a standard uncertainty (u (xpt)), or as an expanded uncertainty U (xpt) with a coverage factor k, where U (xpt) = k . u (xpt). The choice of k will impact the level of confidence (e.g. approximately 95 % for k = 2).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_2_f41ebc0c61.jpg" alt="Eurachem: Figure 2 Options for obtaining the uncertainity of the assigned value, u(Xpt)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_2_f41ebc0c61.jpg 245w," sizes="100vw" width="727" height="378"><h4>Standard deviation for proficiency assessment&nbsp;</h4>Five possibilities are suggested by ISO 13528 to set the standard deviation for proficiency assessment spt (Figure 3). The chosen approach must comply with the objectives of the PT scheme.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_3_f09cb3969e.jpg" alt="Eurachem: Figure 3 Options for obtaining the standard deviation for proficiency assesment" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_3_f09cb3969e.jpg 245w," sizes="100vw" width="638" height="355">Two approaches for performance assessments use spt as shown in Table 1.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Table_1_Scoring_for_performance_assessment_3dd03aa3fb.jpg" alt="Eurachem: Table 1 - Scoring for performance assessment." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Table_1_Scoring_for_performance_assessment_3dd03aa3fb.jpg 245w," sizes="100vw" width="1390" height="571"><h3>Performance assessment&nbsp;</h3>All performance assessments are based on the difference between the participant’s results (xi) and the assigned value (xpt) divided by a normalisation factor (Table 1).&nbsp;<ul><li>The percent difference D% is the normalised difference expressed as a percentage of xpt , for which a prescribed maximum relative permissible error (dE% = dE / xpt) is defined by the PT provider.&nbsp;</li><li>The z score (unitless) compares the participant’s deviation from the assigned value with the standard deviation for proficiency assessment (spt). When the uncertainty of the assigned value is significant (u(xpt) &gt; 0.3 spt), the z’ score should be used instead, to include the contribution of u(xpt) in the denominator.&nbsp;</li><li>The zeta (ζ) score (unitless) states whether the laboratory’s result agrees with the assigned value within the respective uncertainty. The denominator is the combined (standard) uncertainty of the assigned value u(xpt) and the (standard) measurement uncertainty reported by the laboratory u(xi). An unsatisfactory zeta score can either be caused by an inappropriate estimation of the measured quantity value (e.g. concentration, content), or of its measurement uncertainty, or both.&nbsp;</li><li>The En score (unitless), unlike the zeta score, uses a combination of expanded uncertainties as the normalisation factor. This combination corresponds to a confidence interval of approximately 95 %. En scores are often used in metrology comparisons among calibration laboratories.</li></ul><h3>Interpretation of performance scores&nbsp;</h3>According to ISO 13528:2022 clause 9.4.2, the conventional interpretation of the z, z’ and ζ scores is as follows:&nbsp;<ul><li>A result that gives |score| ≤ 2.0 is considered to be acceptable, indicating satisfactory performance.&nbsp;</li><li>A result that gives 2.0 &lt; |score| &lt; 3.0 is considered to give a warning signal, indicating questionable performance.&nbsp;</li><li>A result that gives |score| ≥ 3.0 is considered to be unacceptable (or action signal), indicating unsatisfactory performance.&nbsp;</li></ul>Similarly, |En| &lt; 1 and |D%| &lt; dE% indicate successful (acceptable) performance.

Understanding PT performance assessment

Article

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent Technologies

Thermo Fisher Scientific

Shimadzu Corporation

This presentation aims to provide a comprehensive introduction to Fourier Transform Infrared Spectroscopy (FTIR).
The central focus is on the essential principles underlying FTIR, as well as offering valuable insights and practical strategies to optimize its use in both lab and field environments. This session will not only elucidate the theory and mechanics of FTIR but also present effective tips and tricks that aid in enhancing the performance and reliability of FTIR spectrometry.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technologies: A Workshop on the Fundamentals and Tips & Tricks of FTIR

A Workshop on the Fundamentals and Tips & Tricks of FTIR

Essential principles underlying FTIR, as well as offering valuable insights and practical strategies to optimize its use in both lab and field environments.

Simple good practices for quality data including:
<ul>
<li>Sample prep and key accessories
</li>
<li>Attenuated Reflectance Accessory (ATR)
<ul>
<li>Overview
</li>
<li>Pros and Cons
</li>
<li>Tips for ATR analysis
</li>
</ul>
</li>
<li>Environmental effects - CO2 and H2O
</li>
<li>Library search and precautions
</li>
<li>Micro analysis
<ul>
<li>Application examples</li>
</ul>
</li>
</ul>

FTIR Tips and Tricks Webinar

This workshop will show the workflow of analyzing a microplastic sample on the Agilent 8700 Laser Direct Infrared Imaging (LDIR). The sample format for introduction into the instrument will be discussed, as well as a description of system operation.<blockquote>Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.</blockquote>

Agilent Technologies: Agilent Webinars On Demand

Microplastics Identification: Tips & Tricks Workshop

This workshop will show the workflow of analyzing a microplastic sample on the Agilent 8700 Laser Direct Infrared Imaging (LDIR). 

The two main worklflows of the LDIR will be discussed and demonstrated.<blockquote>Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.</blockquote>

Agilent Technologies: Spectroscopy Digital Workshops and Bootcamps

Agilent 8700 LDIR Workflows

The two main worklflows of the LDIR will be discussed and demonstrated.

<div><div container-id="cq-colctrl-lt0" comp-id="A1"><div>Join us for an insightful session on Vaya Method Development Tips and Tricks! Dive into the world of Spatially Offset Raman Spectroscopy (SORS) and the Agilent Vaya Handheld Raman. We'll explore the unique value proposition of SORS and provide guidance on developing robust methods on the Vaya for ID testing in a manufacturing environment. Don't miss this opportunity to enhance your understanding and skills!<h5>Key learning objectives:</h5><ul><li>What is spatially offset Raman spectroscopy?</li><li>How to interpret the information supplied by the Vaya?</li><li>How to develop robust methods on the Vaya?</li><li>What is a custom method on Vaya?</li></ul><h5>Who should attend?</h5>All Vaya user or any pharma/biopharma customers interested to know more on through-packaging raw materials identification.<blockquote>Presenter: Frederic Prulliere (Product Manager Raman ID, Agilent Technologies)Frederic Prulliere is the Product Manager for the Raman ID product line at Agilent Technologies. Prulliere leads the product development of spatially offset Raman spectroscopy-based solutions, particularly for verifying raw materials at reception. He joined Agilent Technologies in 2012 as a business development manager for mobile Fourier transform infrared spectroscopy (FTIR).</blockquote></div></div></div>

Agilent Technologies: Handheld Raman Vaya - Advanced Tips & Tricks

Handheld Raman Vaya - Advanced Tips & Tricks

Join us for an insightful session on Vaya Method Development Tips and Tricks! 

Handheld Raman Vaya - Tips & Tricks

Whether you are new to FTIR microscopy or looking to refine your existing workflows, this live webinar will provide practical guidance to help strengthen your analytical approach. We will explore key considerations in measurement modes, sample preparation, method optimization and data interpretation—focused on helping you generate clear, reliable results across a range of applications.Through real-world examples and applied strategies, we will discuss how to select appropriate measurement techniques, optimize parameters for improved spectral quality and address common analysis challenges. Our goal is to support you in building confidence when working with complex or heterogeneous samples.<h5>You will learn:</h5><ul><li>Transmission, reflectance or micro-ATR—how to determine an appropriate mode for your sample</li><li>Practical considerations for microscopy sample preparation and handling</li><li>Approaches to optimizing measurement parameters for improved spectral quality</li><li>Library matching strategies to address common interpretation challenges</li><li>Tips for analyzing complex and multi-layered materials</li></ul><blockquote>Presenter: Suja Sukumaran, PhDSuja Sukumaran, Ph.D., is a Product Manager at Thermo Fisher Scientific. She received her Ph.D. in Biophysics from Johann Wolfgang Goethe University, Germany, as part of the International Max Planck Research School. She has expertise and extensive experience in molecular spectroscopy, visible and fluorescence Imaging, and protein and lipid biochemistry. Her current research interests are AI for protein folding, microplastics, and polymer recycling.</blockquote>

Thermo Scientific: FTIR microscopy: Practical guidance for effective sample analysis

FTIR microscopy: Practical guidance for effective sample analysis

Live webinar on FTIR microscopy workflows: measurement modes, sample preparation, optimization and data interpretation for reliable analytical results.

ICPMS webinars focusing on Tips & Tricks - page 1