This study examines the combustion behavior of B4C/Bi2O3 pyrotechnic delay compositions as sustainable alternatives to conventional materials. Thermodynamic modeling and experimental testing were used to evaluate the influence of compaction pressure, particle size, and granule size on burning performance.Results showed that increased compaction reduced burning rates by lowering porosity and shifting combustion from convective to conductive mechanisms. Residue and gas analyses supported a multistage reaction pathway, demonstrating the potential of B4C/Bi2O3 formulations for environmentally improved pyrotechnic applications.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964">Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions</a></h4>Danillo F. Vianna Cantini, Vojtěch Pelikán*, Eva Schmidová, Jiří PachmanACS Omega 2026, 11, 3, 4668–4683<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acsomega.5c10964">https://doi.org/10.1021/acsomega.5c10964</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.<div>Pyrotechnic delay compositions are formulations designed to create a specific delay time, determined primarily by their burning rate. These compositions are essential in timing energetic events and are used extensively in both civilian and military applications. <a href="javascript:void(0);">(1)</a> This broad usage leads to diverse motivations for studying such materials. In civilian contexts, such as mining, the focus is typically on safety and cost-effectiveness. <a href="javascript:void(0);">(2)</a> For military purposes, reliability and precision are key factors, often with stringent performance requirements. <a href="javascript:void(0);">(3)</a>Pyrotechnic delay compositions are classified based on their combustion behavior into gassy or gasless types. In confined, sealed and obturated environments, gasless compositions are favored, to avoid gas buildup. <a href="javascript:void(0);">(1,4)</a> However, in unconfined or vented systems, gassy compositions are not problematic. For example, in fireworks, where combustion gases freely dissipate, <a href="javascript:void(0);">(1)</a> or in vented housings like hand grenades or signaling devices, gassy delays are acceptable. <a href="javascript:void(0);">(5,6)</a>In gassy compositions, the burning rate is influenced by the loading (or consolidation) pressure. Hot gases generated by the chemical reaction penetrate gas channels (voids) in the material, igniting unreacted material through a process known as convective heating. As loading pressure increases, these voids are gradually reduced, which diminishes convection and subsequently lowers the burning rate. In contrast, for gasless compositions, burning is driven by conductive heating, where heat is transferred through direct particle-to-particle contact, leading to the opposite effect. <a href="javascript:void(0);">(7−9)</a>Historically, up until World War II, black powder served as the foundation for most delay elements. Nowadays, it continues to be utilized for this function and others, but on smaller scales. <a href="javascript:void(0);">(1)</a> Some more recent and traditional formulations for pyrotechnic compositions include fuels like silicon, boron, tungsten, zinc, iron, zirconium, and manganese. Examples of these are Si/Pb3O4, <a href="javascript:void(0);">(8,10)</a> B/BaCrO4 <a href="javascript:void(0);">(8)</a>, W/BaCrO4/KClO4, <a href="javascript:void(0);">(5,6,11)</a> Zn/PbO2, <a href="javascript:void(0);">(12)</a> Fe/BaO2, <a href="javascript:void(0);">(13)</a> Zr/KClO4, <a href="javascript:void(0);">(8)</a> and Mn/PbCrO4/BaCrO4. <a href="javascript:void(0);">(14)</a>Currently, researchers are actively developing several new formulations for pyrotechnic delays. One of the main motivations for this is the need to transform these compositions into “greener” ones. <a href="javascript:void(0);">(1,2)</a> This means that compositions that could cause problems for the environment or human health should be avoided. To achieve this sustainability, the identification and replacement of known or potentially harmful, toxic, and carcinogenic compounds is vital. <a href="javascript:void(0);">(10)</a> Heavy metals, persistent organic pollutants, toxic gases, volatile organic compounds and known causers of human health problems are examples of such substances to be removed. <a href="javascript:void(0);">(2,5,15)</a>Specifically, there are several attempts to replace lead, barium, chromates, and perchlorates. <a href="javascript:void(0);">(15)</a> The reason is that most of the established delay formulations used today contain these substances. <a href="javascript:void(0);">(2,5)</a> Lead, barium and chromium (contained in chromates) are heavy metals and are known to cause serious health problems in human, specially to nervous, cardiovascular and respiratory systems. <a href="javascript:void(0);">(5,16)</a> Perchlorates are well-documented substances and are used in various pyrotechnic applications. However, they are widely recognized as contributors to thyroid issues. <a href="javascript:void(0);">(5)</a>From the above, it is clear that modern strategies in pyrotechnics are increasingly focused on developing new materials that prioritize both efficiency and sustainability. This shift imposes numerous restrictions, meaning that formulations must be designed with precise planning and thorough investigation to meet both performance and environmental standards.Boron could be considered the ideal fuel for pyrotechnic reactions due to its high energy content. However, it presents combustion issues for its limited reactivity due to boron oxide layer and boron agglomerates formation upon heating. <a href="javascript:void(0);">(17)</a> The boron oxide layer acts as a barrier, hindering oxygen (O) diffusion and consequently limiting the oxidation of boron. <a href="javascript:void(0);">(18)</a>Boron carbide (B4C) is a natural candidate for combustion processes due to its lower ignition point, which is attributed to its higher reactivity. This reactivity stems from the diffusion of carbon (C) particles, which oxidize into gaseous products. These gaseous products create diffusion channels that penetrate the boron oxide layer, breaking down the layer and agglomerates, thereby further improving the reaction. <a href="javascript:void(0);">(18,19)</a> B4C presents better combustion properties, with better burning stability and reliable self-propagation, resulting in better combustion efficiency. <a href="javascript:void(0);">(17)</a>Bismuth trioxide (Bi2O3) is an attractive oxidizer for pyrotechnic delay compositions due to several advantageous properties. Its high oxygen content and efficient oxygen release facilitate sustained combustion, while its favorable thermal properties, including a relatively low melting and decomposition temperature, ensure that oxygen is available at precisely the right moment to support a controlled reaction. <a href="javascript:void(0);">(20)</a> Additionally, Bi2O3 high density allows for compact formulations, promoting consistent and reliable burn rates. Also, it has a low heat of formation (approximately −582 kJ/mol), which is crucial to minimize the energy required to initiate its decomposition. This enhances the overall reaction efficiency, allowing Bi2O3 to rapidly release oxygen without consuming excessive energy, thus ensuring sustainable and stable combustion. <a href="javascript:void(0);">(8)</a>In addition to their technical advantages, Bi2O3 and B4C offer a significant environmental benefit: they are considered more eco-friendly compared to other materials commonly used in pyrotechnic compositions. Bi2O3 serves as a less toxic alternative to traditional oxidizers like lead-based compounds, reducing the risk of environmental contamination and exposure to harmful heavy metals. <a href="javascript:void(0);">(1,8,16)</a> Similarly, B4C contributes to cleaner combustion, producing fewer pollutants and minimizing the environmental impact. <a href="javascript:void(0);">(5)</a> This makes both materials not only effective but also greener choices for sustainable pyrotechnic applications.<h4>2. Experimental Section</h4><h5>2.8. Material Characterization</h5>Particle and granule size distribution were measured with a Malvern Mastersizer 3000 (Malvern Panalytical). Scanning Electron Microscopy (SEM) was carried out with a TESCAN MIRA (TESCAN) to examine morphology and confirm particle size. A 40 cm3 combustion chamber was used to analyze pressure profile, quantify solid residues, and collect combustion gases for further analysis. Fourier Transform Infrared Spectroscopy (FTIR) was performed using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2392">Nicolet iS50 FT-IR</a> (Thermo Scientific) and standardized nitrogen (N2) background to identify gas-phase products. Thermal stability and water content assessments were conducted using TGA (NETZSCH TG 209 F3 Tarsus) and DSC (NETZSCH DSC 200 F3 Maia). Energy Dispersive X-ray Spectroscopy (EDS) was performed using a Bruker Quantax 200 (Bruker) for semiquantitative chemical composition analysis of the combustion residues. X-ray diffraction (XRD) analyses were performed using a Rigaku MiniFlex diffractometer for complementary phase identification, while surface chemical states were characterized by X-ray photoelectron spectroscopy (XPS) using a Scienta Omicron ESCA2SR system.<h4>3. Results and Discussion</h4><h5>3.7. FTIR Analysis of Combustion Gases</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig10">Figure 10</a> compares the FTIR spectra of combustion chamber gases from stoichiometric (blue) and fuel-rich (red) tests, highlighting CO and CO2 as the main species, consistent with Horiuchi. <a href="javascript:void(0);">(18)</a> Normalizing their absorbance to concentration using standard references yielded CO2/CO ratios of 0.67 (stoichiometric) and 0.34 (fuel-rich). However, a quantitative analysis is approximate and inherently imprecise, as potential contamination during gas collection and measurement could affect the results, given the challenge of maintaining a completely controlled internal atmosphere. A small fraction of hydrocarbon species (e.g., CH4, C2H4, and C2H2) was also identified in both samples.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 10. Comparative FTIR spectra of combustion gas compositions in a combustion chamber." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_10_Comparative_FTIR_spectra_of_combustion_gas_compositions_in_a_combustion_chamber_ac7b7daf84.jpg 245w," sizes="100vw" width="1956" height="989">While experimental results indicate a higher CO2 presence than predicted, the overall trend aligns with expectations─higher fuel content shifts combustion products toward less oxidized species. Notably, the identified gaseous products are relatively simple and exhibit low toxicity compared to halogenated or metal-containing species commonly found in traditional pyrotechnic formulations, supporting the potential of this system as a more environmentally friendly alternative.Since the reaction involves both condensed-phase reactants and products, characterizing the solid residues is essential to evaluate the extent of reaction and gain insight into the actual progression of the reaction pathway. For this, SEM imaging and EDS analysis were employed to investigate the morphology and elemental composition of the combustion residues.<h5>3.8. SEM and EDS of Burning Residues</h5><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a> presents the SEM analysis of solid residues from the combustion of B4. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acsomega.5c10964/suppl_file/ao5c10964_si_001.pdf">Figure S5</a> exhibits images of the other samples. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>a shows the top view of the burned delay element, revealing the distribution of residues across the surface, while <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig11">Figure 11</a>b provides a magnified view of a region rich in bright spherical structures. These spheres are likely bismuth that transitioned through a liquid or gaseous phase during the reaction and solidified upon cooling. This phenomenon of spherical formation due to phase transition is well-documented in the literature. <a href="javascript:void(0);">(33)</a><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 11. SEM analysis of B4 after burning: (a) top view (50 ×) of the burned delay element showing the distribution of solid residues across the surface; (b) magnified view (1 k×) of a region rich in bright spherical structures." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_11_SEM_analysis_of_B4_after_burning_8fc7a8f520.jpg 245w," sizes="100vw" width="2092" height="831"><h5>3.10. Surface Chemistry of Combustion Residues (XPS)</h5>Survey spectrum scans identified the main photoelectron lines corresponding to carbon, oxygen, boron, and bismuth. High-resolution scans for the O 1s, C 1s, B 1s, and Bi 4f regions of B4 are presented in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsomega.5c10964#fig19">Figure 19</a>, allowing detailed peak deconvolution and chemical assignment.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg" alt="ACS Omega 2026, 11, 3, 4668–4683: Figure 19. XPS high-resolution spectra of O 1s, C 1s, B 1s, and Bi 4f regions for B4." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_ACS_Omega_2026_11_3_4668_4683_Figure_19_XPS_high_resolution_spectra_of_O_1s_C_1s_B_1s_and_Bi_4f_regions_for_B4_5c6064d013.jpg 214w," sizes="100vw" width="2049" height="1498">The analysis confirmed B2O3 as a major surface product and indicated the presence of unreacted B4C in the B4 sample through B–C bonds. sp2 carbon was also detected in B4, suggesting possible graphite formation, as predicted in thermodynamic calculations. A2 showed more Bi3+ than B4, supporting that the stoichiometric composition had more residual Bi2O3, while the fuel-rich B4 sample promoted greater reduction to Bi0. The presence of Bi3+ on the surface observed may result from postcombustion reoxidation of Bi0. These results reinforce the proposed reaction pathway and the role of fuel excess in enhancing reaction completeness. In this analysis, the B 1s spectrum further confirms the absence of BN by the lack of B–N peaks, consistent with the EDS results, which also revealed no detectable nitrogen signal.All experimental findings contribute to the fundamental understanding of boron carbide and bismuth oxide reactions under both basic and applied conditions, particularly in delay compositions. These results provide new insights into the reaction pathway and the underlying combustion mechanism.<h4>4. Conclusions</h4>Stoichiometric formulations of B4C/Bi2O3, which ignited when not pressed, failed to burn after being lightly compacted; a fuel-rich composition is necessary to ensure combustion. The fuel-rich compositions ignited readily and maintained combustion without quenching. Water facilitated the granulation process and improved the final composition. With increasing loading pressure, burning rates decrease due to reduced convective heat transfer, leading the combustion process to transition toward a conductive regime. Particle size also impacted combustion, particularly with larger Bi2O3 particles, which influenced the combustion profile up to a certain threshold. Additionally, the granule size of the final composition was found to alter the burning behavior, with larger granules promoting faster combustion at lower pressures.Thermodynamic calculations provided an initial insight into the reaction process. The findings show that the reaction progresses through distinct stages: starting in a solid–solid preignition phase, transitioning to a solid–liquid phase as components melt, and culminating in a gas phase marked by significant product volatilization, illustrating a complete combustion evolution.FTIR analysis confirmed that the main gaseous products are CO and CO2, indicating reduced environmental toxicity. Elemental and phase analyses confirmed that the reaction followed the expected pathway, with Bi and B2O3 as the predominant products. No Bi2O3 was detected by XRD, indicating that the oxidizer was fully consumed in the bulk. Morphological analysis of the products suggests that, upon cooling, bismuth solidifies into small metallic spheres, while surface analysis indicates that B2O3 remains predominantly in the outer layer. Altogether, the results are consistent and complementary, reinforcing the reliability and scientific rigor of the study.All these observations accentuate the necessity of conducting experiments under application-specific conditions. These findings not only enhance our understanding of the combustion dynamics of low toxicity B4C/Bi2O3 mixtures but also underscore their potential for practical applications requiring precise delay times and environmental sustainability. The successful use of water as a green solvent further highlights the viability of developing sustainable pyrotechnic compositions. This research advances the field by providing valuable insights into optimizing performance while minimizing environmental impact through careful material selection and process control.</div>

Sustainable Pyrotechnics: Combustion Behavior of B4C/Bi2O3 for Delay Compositions

In the week from May 11, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment</h5><ul><li>Tu, 12.5.2026 08:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6136">Registration</a></li></ul>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.<h5>2. SPECTRO Analytical Instruments: Elemental Analysis of Superalloys: Ensuring Performance in Extreme Applications</h5><ul><li>Tu, 12.5.2026 10:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6170">Registration</a></li></ul>Learn how accurate elemental analysis ensures superalloy performance, with OES and XRF solutions for reliable quality control from lab to field.<h5>3. Agilent Technologies: What have you been smoking? Elemental Analysis in Cannabis and Cannabis Products with ICP-MS</h5><ul><li>Tu, 12.5.2026 20:30 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6063">Registration</a></li></ul>Learn how automated calibration and dilution streamline ICP-MS food testing workflows, improving accuracy, traceability, and productivity while addressing rare-earth doubly charged interferences.<h5>4. AZoM: Faster REE Exploration Decisions with XRF Technology Explained</h5><ul><li>We, 13.5.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6195">Registration</a></li></ul>Join the webinar to see how handheld XRF provides a significant advantage in today's fast-paced REE landscape.<h5>5. Bruker: Advancing Industrial Metrology Automation with Bruker's Dimension AFMs</h5><ul><li>We, 13.5.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6172">Registration</a></li></ul>This webinar will explore how Dimension AFM platforms support increasing levels of automation, from scripted measurements to data-driven control.<h5>6. Anton Paar: Polymer Rheology: Impact of Humidity on Material Behavior</h5><ul><li>We, 13.5.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5801">Registration</a></li></ul>Discover how humidity impacts polymers and soft materials. Learn how moisture alters rheology, tackiness, curing, and flowability through real case studies across films, adhesives, foods, and powders.<h5>7. LECO: TOC Determination in Soil and Waste</h5><ul><li>Th, 14.5.2026 14:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6038">Registration</a></li></ul>Join this webinar to explore modern methods for TOC determination in soils and waste. Learn how standardized approaches, instrumentation, and method selection influence data quality and regulatory compliance.

Webinars LabRulezICPMS Week 20/2026

Routine chemical analysis typically involves several steps, e.g. selection of procedure, sampling, sample preparation, measurement, result calculation, uncertainty estimation, and reporting to customer. Based on the result, important decisions and actions are taken. The steps before and after the measurement are often referred to as “pre- and post-analytical”. There are many sources of uncertainty associated with this work, some of which can actually limit the overall quality.&nbsp;Proficiency testing (PT) and external quality assessment (EQA) schemes are effective means of assessing the quality of routine analyses. However, if there are specific procedures, either before or after the measurement, which are applied to the routine samples, but not to the PT test sample, the result reflects only the quality of part of the measurement process. Pre- and post-analytical PT/ EQA schemes are already widely used in laboratory medicine. The standard ISO 15189, that underpins accreditation of medical laboratories, stresses that EQA schemes should “... have the effect of checking the entire process including pre- and post-examination procedures ...”&nbsp;The examples in this leaflet illustrate the potential and importance of pre- and post-analytical PT/EQA. They are intended as an inspiration for the providers to further develop their external quality control activities.<h4>Pre- and post-analytical PT/EQA – a means for harmonisation&nbsp;</h4>By illustrating, e.g. lack of adherence to guidelines, or variation in sample preparation, or inconsistency in interpretation, pre- and post-analytical PT/EQA schemes pinpoint problems not apparent in other schemes. This may lead to improved harmonisation and changes to guidelines and standards.<h4>Example 1: Interpreting clinical chemistry information&nbsp;</h4>Patient background information together with analytical results can be used to check agreement of interpretational advice given by medical doctors. This type of scheme can, therefore, include both pre- and post-analytical aspects. The provider, e.g. through an expert group, ranks the quality of participants’ response and suggestions, and presents them in the report with comments.<h4>Example 2: Sampling requests in microbiology&nbsp;</h4>Using the scenario of food poisoning, pre- &amp; post-analytical aspects of sampling requests in a microbiology scheme can be highlighted. The provider gives information about food type, symptoms, and incubation time with a simulated sample. Participants choose which organism(s) to test for. The associated laboratory work involves examination of samples, report on method(s) of choice and results. Participants could, e.g. be asked to specify which toxins or pathogens are likely to cause the food poisoning and state whether or not they will disseminate information, e.g. to hospitals or food suppliers. The feedback report would then show the results of each participant together with the comments of the provider.&nbsp;<h4>Example 3: Toy testing&nbsp;</h4>Faulty design, usage and chance play a role in injury and death incidents related to children’s toys. Toy safety is the practice of ensuring that toys are safe, usually through the application of set safety standards. The PT provider sources a toy, performs visual assessment of its homogeneity, and distributes the samples. Participants are requested to assess the toy against the European standard EN 71 and they have to decide which clauses of the standard apply. The clauses chosen define the test(s) to be carried out. The feedback report will contain a “model answer” including clauses, tests and labeling requirements (when applicable).&nbsp;<h4>Example 4: Monitoring drinking water quality&nbsp;</h4>A post-analytical application can be underpinned by legislation and national regulations (Directive 98/83/EC). Participants receive a synthetic drinking water sample with properties close to one or more limiting values. They are requested to deliver results, uncertainties and a “pass/fail” recommendation to the customer. The recommendations of the provider are listed in the feedback report for educational purposes. Information can be fed back also to regulators to serve, e.g. as basis for further discussions.&nbsp;<blockquote><h5>More information / further reading&nbsp;</h5>Information about PT providers and schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organisations.</blockquote>

Pre- and post-analytical proficiency testing

Article

Webinars

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Metrohm

Merck

HORIBA Scientific

Agilent Technologies

SelectScience

C&EN

Agilent Vaya Raman spectrometer is a true see-through-barrier instrument with great adaptivity and sensitivity. The Agilent Vaya Raman system tests more raw materials for the same cost and reduces the need for sampling. Vaya offers best-in-class ID testing through transparent containers, and transformative handheld testing through nontransparent containers—for the fastest possible release to manufacturing.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technologies: Through Barrier Verification using a Handheld Spectrometer with SORS

Through Barrier Verification using a Handheld Spectrometer with SORS

Agilent Vaya Raman spectrometer is a true see-through-barrier instrument with great adaptivity and sensitivity. 

Through Barrier Verification by SORS Handheld Spectrometer

IR and Raman spectroscopy are well established, mature techniques present nowadays in most analytical laboratories.  However, they do pose several key fundamental limitations. The new breakthrough technique of Sub-micron Optical Photothermal Infrared (O-PTIR) Spectroscopy overcomes the limited spatial resolution of traditional IR microscopy with submicron resolution and the limited sensitivity and fluorescence interference limitations of Raman microscopy. 
Furthermore, O-PTIR is able to bring together the complementarity of IR and Raman into a single platform, single measurement for the first time, enables sub-micron, simultaneous IR+Raman microscopy delivering IR and Raman spectra from the same spot, at the same time with the same spatial resolution. 
This webinar discusses this novel technique and provides numerous application examples.
<h4>Part 1: Introduction &amp; Overview by Dr. Mustafa Kansiz</h4>
<ul>
<li>Overview of current direct IR (FTIR &amp; QCL) and Raman micro spectroscopic techniques and Fluorescence Microscopy </li>
<li>Introduction to Submicron O-PTIR and simultaneous Raman microscopy (IR+Raman) and the benefits of co-located Fluorescence </li>
<li>Various application examples of particulates, materials science and more</li>
</ul>
<h4>Part 2: Review of Environmental Applications by Dr. Andrew Ault Microplastics, environmental</h4>
Dr. Ault will present the results of his group&#39;s recent publication on an important source of atmospheric particles - Sea Spray Aerosols (SSA).  
In this work, they characterize individual SSA particles using new generation submicron simultaneous IR+Raman (O-PTIR) microscopy for organic profiling, combined with EDX for elemental profiling. 
Dr. Ault will also talk to his recent research relating to microplastics.  
<h5>Key Learning Objectives:</h5>
<ul>
<li>Understand the principle of operation of O-PTIR for submicron IR spectroscopy</li>
<li>Learn about specific applications of submicron simultaneous IR and Raman</li>
<li>How O-PTIR can advance your research goals and increase the impact of your publications</li>
</ul>
<h5>Who Should Attend:</h5>
<ul>
<li>Laboratory Directors and Managers  </li>
<li>Research Professors and Academics</li>
<li>Regional Water Board Researchers</li>
<li>Industrial Failure Analysis Engineers</li>
<li>Chemical and Polymer Engineers and Scientists</li>
<li>Vibrational Spectroscopists</li>
</ul>
<blockquote>
Presenter: Dr. Mustafa Kansiz (Director of Product Management and Marketing, Photothermal Spectroscopy Corp.)
</blockquote>
<blockquote>
Presenter: Dr. Andrew Ault (Dow Corning Assistant Professor of Chemistry and Associate Professor of Chemistry, University of Michigan)
</blockquote>
<blockquote>
Presenter: Melissa O&#39;Meara (Forensic Science Consultant, C&amp;EN Media Group)
</blockquote>

C&EN: Sub-500nm Simultaneous IR+Raman Microscopy for Microplastics and Materials Science Research

Sub-500nm Simultaneous IR+Raman Microscopy for Microplastics and Materials Science Research

This webinar discusses this novel technique and provides numerous application examples.

Sub-500nm Simultaneous IR+Raman Microscopy for Microplastics

Raman spectroscopy is used around the globe for identification of unknowns, verification of raw materials, basic R&amp;D, and process monitoring and control. The most commonly deployed technology is based on 785 nm lasers and detectors that leverage innovations from the telecommunications boom in the 1990s. However, this technology has been fundamentally limited by fluorescence interference that overpowers the Raman signal. The most common ways to overcome fluorescence have all had significant drawbacks around cost, safety and sample preparation – until now.
Developed for first responders to help identify unknowns in street narcotics, eXTRaction (XTR) technology uses advanced digital signal processing to separate Raman data from a background. With XTR, 785 nm Raman can be extended to difficult-to-analyze systems.
In this webinar, Dr. Adam J. Hopkins and Elena Hagemann will explain how XTR works and show different use cases for both qualitative and quantitative measurements, including biodiesel and polyurethane production.
<h5>Who should attend?</h5>
<ul>
<li>QA departments looking to extend raw material identification outside the lab</li>
<li>Researchers looking for flexible Raman measurement solutions for a variety of materials</li>
<li>Anyone measuring complex media that is too fluorescent for 785 nm Raman spectroscopy</li>
<li>Process development engineers and scientists looking for upstream/development solutions that can scale with production</li>
</ul>
<h5>Key learning points</h5>
<ul>
<li>XTR processing enables Raman measurements of fluorescent materials</li>
<li>Quantitative measurement performance is not adversely impacted by XTR processing</li>
<li>Raw material ID performance is enhanced with XTR, with identification performance comparable to 1064 nm systems</li>
<li>Non-contact Raman measurements are possible from up to 1.5 meters with XTR enabled systems</li>
</ul>
<blockquote>
Presenter: Adam J. Hopkins, PhD (Spectroscopy Product Manager, Metrohm USA)
</blockquote>
<blockquote>
Dr. Adam J. Hopkins is the Spectroscopy Product Manager at Metrohm USA. He has nearly 20 years of experience as a vibrational spectroscopist. He received his Ph.D. in chemistry from the University of Oregon where he studied nonlinear optical spectroscopy under Geraldine Richmond.
</blockquote>
<blockquote>
Prior to joining Metrohm USA, Adam worked developing spectroscopic solutions for standoff and noncontact sensing applications using Laser Induced Breakdown and Raman spectroscopy. Dr. Hopkins is a member of the American Chemical Society, Society for Applied Spectroscopy, Coblentz Society and SPIE. He is the author of 19 papers and proceedings and is the author of three patents.
</blockquote>
<blockquote>
Presenter: Elena Hagemann (Applications Specialist, Metrohm USA)
</blockquote>
<blockquote>
Elena Hagemann is an Applications Specialist at Metrohm USA in Riverview, Florida. She earned her Master degree in Analytical and Bioanalytical Chemistry at the Applied University of Aalen, Germany, where she completed her studies with her Master thesis focused on Karl Fischer Titration, NIR Spectroscopy and Multivariate Data Analysis. Elena joined the Metrohm Group in August 2013 and started with Metrohm USA in January of 2018, focusing on Raman and NIR Spectroscopy. She performs internal as well as customer training.
</blockquote>

Metrohm: Fluorescence-Free Raman at 785nm

Fluorescence-Free Raman at 785nm

We will explain how XTR works and show different use cases for both qualitative and quantitative measurements, including biodiesel and polyurethane production.

Can the TopScan 4300 FTIR test liquid? What is the detection limit of the 4300 FTIR? Is ambient light an issue for Vaya Raman spectrometer?
Lets discuss some of the most common questions about Agilent Handheld spectrometers.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technologies: Common Handheld FTIR and Raman Questions Answered

Common Handheld FTIR and Raman Questions Answered

Can the TopScan 4300 FTIR test liquid?  What is the detection limit of the 4300 FTIR? Is ambient light an issue for Vaya Raman spectrometer?

This first session of a four-part ‘Fundamentals of Spectroscopy’ course, will examine core concepts essential to understanding common optical spectroscopy methods.
In this session, Adam Wise, and applications specialist from Andor will explain how light – an electromagnetic wave – passes through, bounces off, gets absorbed by, and is made by, atoms, molecules and solids. This session is in no way designed to replace a long and rigorous course of study, but instead tries to show a physical model of the language used to describe spectroscopy, as well as define a common vocabulary that will be relied on as the course continues.
Key learning objectives
<ul>
<li>Understand that what a spectrometer ‘sees’ differs from our perception of color, both in terms of finer resolution, and no hard limits on the energies of light that can be detected</li>
<li>Discover a simple but meaningful model of how the electric field of light interacts with electrical charges in atoms and molecules</li>
<li>Recognize how the wavelength and energy of light relate to different size scales and emission/absorption processes within atoms, molecules, and bulk matter</li>
</ul>
Who should attend?
<ul>
<li>Academic Researcher</li>
<li>R&amp;D Scientist</li>
<li>Lab Technician</li>
<li>Principal Investigator</li>
<li>Laboratory Manager</li>
<li>Manager</li>
<li>Postdoctoral Research Assistant</li>
<li>Corporate Manager</li>
<li>PhD Student</li>
<li>Undergraduate Student</li>
<li>Engineer or Software Engineer</li>
<li>Teaching Fellow</li>
</ul>
<blockquote>
Presenter: Adam Wise (Andor Technology)
</blockquote>
<blockquote>
Adam Wise is an applications scientist at Andor Technology, specializing in spectroscopy and scientific cameras. He earned his PhD working with John Grey at the University of New Mexico, studying Raman spectroscopy of organic semiconductors. After his postdoctoral research at UMass Amherst, Wise entered the field of optical instrumentation, and continues to support research by helping scientists get the right cutting-edge tools.
</blockquote>
<blockquote>
Presenter: Georgina Wynne Hughes (Editorial Team)
</blockquote>
<blockquote>
Georgina studied at Birmingham University where she gained a BSc in Biomedical Science, and an MSc by Research in Cancer and Genomic Sciences, which focused on defective autophagy in rare neurodegenerative diseases. As a member of the Editorial team, she now plays an integral role in shaping the content on SelectScience.
</blockquote>

SelectScience: The basic physics of spectroscopy: Light-matter interaction for fun and profit

The basic physics of spectroscopy: Light-matter interaction for fun and profit

‘Fundamentals of Spectroscopy’ course, will examine core concepts essential to understanding common optical spectroscopy methods.

The basic physics of spectroscopy: Light-matter interaction

In this webinar, you will learn:
<ul>
<li>Learn about new possibilities for using Raman technology</li>
<li>Discover uses and benefits of Raman technology in quality control of cell culture media preparation</li>
</ul>
Detailed description: 
Process Analytical Technologies (PAT) are used to measure Critical Process Parameters (CCPs) which affect Critical Quality Attributes (CQAs). They are therefore particularly interesting for better process knowledge and control. Raman spectroscopy has already demonstrated very good results in real-time monitoring of main parameters of cell cultures. This technology could also be used in other steps of a manufacturing process. 
In this webinar, we will explore the possibilities of using Raman spectroscopy for quality control of cell culture media preparation. We will discuss the benefits of using this technology at this step and the demonstrated performances.
<blockquote>
Presenter: Nathan Gay (Bioprocess Applications Engineer)
</blockquote>
<blockquote>
Nathan Gay works as applications engineer at our company and is specialized in bioprocesses. He works on the implementation of Raman technology developing proofs of concept and researching new applications. Nathan has an engineer’s degree in biotechnology from the Ecole Nationale Supérieure de Technologie des Biomolécules de Bordeaux (ENSTBB), obtained in a work-study program with our company as an Industrialization Expert for the technology transfer between development and production in USP and DSP.
</blockquote>

MERCK: Monitoring and quality control of cell culture media preparation using Raman spectroscopy

Monitoring and quality control of cell culture media preparation using Raman spectroscopy

In this webinar, we will explore the possibilities of using Raman spectroscopy for quality control of cell culture media preparation.

Control of Cell culture media preparation Raman spectroscopy

In this third session of a four-part ‘Fundamentals of Spectroscopy’ course, having previously covered the ‘why’, we’ll now focus on the ‘how’. There is currently a dizzying array of tools available for spectroscopy, but the fundamental goal remains the same.
Here we will discuss the current state-of-the-art common spectroscopy components – spectrometers, detectors, and associated optics – as well as their historical development. We will discuss some of the technological breakthroughs that have made the heroic measurements of yesterday commonplace practice today, as well as how different equipment has evolved to suit the particular needs of different experiments.
Key learning objectives
<ul>
<li>Discover the function of a spectrograph and how the earliest spectrographs achieved this</li>
<li>Understand the difference between a prism and grating spectrograph and learn why grating spectrographs are significantly more common</li>
<li>Consider what is meant by “dispersion” in a spectrometer, what is spectral resolution, and how the two concepts relate to each other</li>
</ul>
Who should attend?
<ul>
<li>Academic researchers</li>
<li>R&amp;D scientists</li>
<li>Lab technicians</li>
<li>Principal investigators</li>
<li>Laboratory, facilities or corporate managers</li>
<li>Postdoctoral research assistants</li>
<li>Undergraduate and PhD students</li>
<li>Engineers or software engineers</li>
<li>Teaching fellows</li>
</ul>
<blockquote>
Presenter: Adam Wise (Andor Technology)
</blockquote>
<blockquote>
Adam Wise is an applications scientist at Andor Technology, specializing in spectroscopy and scientific cameras. He earned his PhD working with John Grey at the University of New Mexico, studying Raman spectroscopy of organic semiconductors. After his postdoctoral research at UMass Amherst, Wise entered the field of optical instrumentation, and continues to support research by helping scientists get the right cutting-edge tools.
</blockquote>
<blockquote>
Presenter: Georgina Wynne Hughes (Editorial Team)
</blockquote>
<blockquote>
Georgina studied at Birmingham University where she gained a BSc in Biomedical Science, and an MSc by Research in Cancer and Genomic Sciences, which focused on defective autophagy in rare neurodegenerative diseases. As a member of the Editorial team, she now plays an integral role in shaping the content on SelectScience.
</blockquote>

SelectScience: Optimizing equipment for optical spectroscopy

Optimizing equipment for optical spectroscopy

In this third session of a four-part ‘Fundamentals of Spectroscopy’ course, having previously covered the ‘why’, we’ll now focus on the ‘how’.

Optical microscopy is very common technique for visualization and characterization at the micron scale. Many modalities exist to highlight different features. However, the chemical information is almost always missing. Raman spectroscopy is a complementary technique that can provide chemical information about the sample.
During this webinar, we will present how these different microscopy modalities, combined with Raman spectroscopy, make Raman microscopy so powerful.

HORIBA Scientific: What makes Raman microscopy the ideal coupling method between optical microscopy and chemical characterization?

What makes Raman microscopy the ideal coupling method between optical microscopy and chemical characterization?

We will present how these different microscopy modalities, combined with Raman spectroscopy, make Raman microscopy so powerful.

Raman microscopy: optical microscopy & characterization?

During this second session of a four-part ‘Fundamentals of Spectroscopy’ course, we will break down some common spectroscopic techniques (UV/VIS absorption spectroscopy, photoluminescence, and Raman scattering amongst others), examine how they work at a relatively low level, and discuss what they can be used to learn in different situations. We will pay special attention to the historical developments of these techniques, particularly the scientific and economic motivations that drove the people who created and refined them.
Key learning objectives
<ul>
<li>Understand the concept of absorption spectroscopy, the design of an absorption spectrometer, and see how UV-VIS absorption spectroscopy can be used in quantifying protein concentration.
</li>
<li>Differentiate between the different types of luminescence, specifically photoluminescence vs. fluorescence and understand the basics of fluorescence and phosphorescence spectrometers. Become familiar with applications using time-resolved fluorescence, solvatochromic shifts and Förster resonance energy transfer.
</li>
<li>Learn the basics of Raman spectroscopy, and the design of a Raman spectrometer. Understand the units used in Raman spectroscopy and learn how Raman specificity can be used to measure various physical and chemical properties in materials.
</li>
</ul>
<blockquote>
Presenter Shayne Harrel (Andor Technology)
</blockquote>
<blockquote>
Shayne Harrel is a spectroscopy specialist for the Americas at Andor. He holds a PhD in physical chemistry from Yale University where he studied dynamical processes in charge transfer systems, magnetic materials and semiconductors using time-resolved terahertz spectroscopy. Prior to joining Andor, he was a senior applications engineer at MKS Instruments and has held previous positions as Chief Scientist-Americas for Izon Science, Senior Applications Scientist for Olympus Corporation, and as a chemist for the US Food and Drug Administration.
</blockquote>
<blockquote>
Presenter Georgina Wynne Hughes (Editorial Team)
</blockquote>
<blockquote>
Georgina studied at Birmingham University where she gained a BSc in Biomedical Science, and an MSc by Research in Cancer and Genomic Sciences, which focused on defective autophagy in rare neurodegenerative diseases. As a member of the Editorial team, she now plays an integral role in shaping the content on SelectScience.
</blockquote>

SelectScience: Spectroscopy techniques in practice: Methods and motivations

Spectroscopy techniques in practice: Methods and motivations

We will break down UV/VIS absorption spectroscopy, photoluminescence, and Raman scattering amongst others and examine how they work.

We will discuss the capabilties of Agilent&#39;s Vaya - a handheld Raman spectrometer utilizing spatially offset Raman Spectroscopy (SORS) - and demonstrate its power to perform through-barrier measurements.
<blockquote>
Presenter: Scott Melis, PhD (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Scott Melis has a PHD in Physics from Georgetown University in Washington, DC and started with Agilent in 2021 as a Molecular Spectroscopy Application Scientist. In his graduate work, Scott studied nanoparticle formation and growth for a variety of applications. Projects that he worked with include developing processes to deposit and characterize semiconducting molecular nano-cocrystals for use in optoelectronic devices as well as controlling polymer nanoparticle size through rapid mixing conditions.
</blockquote>

Agilent Technologies: Tips For Working With Agilent's Vaya Handheld Raman Spectrometer

Tips For Working With Agilent's Vaya Handheld Raman Spectrometer

We will discuss the capabilties of Agilent's Vaya - a handheld Raman spectrometer utilizing spatially offset Raman Spectroscopy (SORS)

ICPMS webinars focusing on RAMAN - page 8