A Method for the Detection of Tire Wear Microplastics in Zebrafish Guts by Laterally Resolved LA-ICP-MS-Based Elemental Fingerprinting and Chemometrics

This leaflet is intended to help participants in quantitative proficiency testing (PT) schemes to better understand the performance assessment made by the PT provider [1-4].<h3>Performance assessment parameters&nbsp;</h3><h4>Assigned value&nbsp;</h4>In order to assess individual performances, the results reported by participants are compared to the value assigned by the PT provider (xpt). ISO 13528 [1] suggests five different ways to obtain xpt (Figure 1). In this context, the design of the PT scheme must reflect the objectives of the scheme, comparing results either to a predetermined xpt (independent from the participant results), or to a value derived from the reported results. The PT provider is responsible for defining xpt , taking into account the advantages and disadvantages of the various possibilities when establishing metrological traceability or estimating the uncertainty of the assigned value, u(xpt).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_1_e5ef5d1f9c.jpg" alt="Eurachem - Figure 1 Options for obtaining the assigned value, Xpt" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_1_e5ef5d1f9c.jpg 245w," sizes="100vw" width="640" height="382"><h4>Uncertainty of the assigned value&nbsp;</h4>The uncertainty of the assigned value u(xpt) can be estimated in at least five different ways [1], each corresponding to the value assignment strategy illustrated in Figure 1. The different uncertainty evaluation methods are listed in Figure 2. This uncertainty can be reported as a standard uncertainty (u (xpt)), or as an expanded uncertainty U (xpt) with a coverage factor k, where U (xpt) = k . u (xpt). The choice of k will impact the level of confidence (e.g. approximately 95 % for k = 2).<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_2_f41ebc0c61.jpg" alt="Eurachem: Figure 2 Options for obtaining the uncertainity of the assigned value, u(Xpt)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_2_f41ebc0c61.jpg 245w," sizes="100vw" width="727" height="378"><h4>Standard deviation for proficiency assessment&nbsp;</h4>Five possibilities are suggested by ISO 13528 to set the standard deviation for proficiency assessment spt (Figure 3). The chosen approach must comply with the objectives of the PT scheme.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_3_f09cb3969e.jpg" alt="Eurachem: Figure 3 Options for obtaining the standard deviation for proficiency assesment" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_3_f09cb3969e.jpg 245w," sizes="100vw" width="638" height="355">Two approaches for performance assessments use spt as shown in Table 1.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Table_1_Scoring_for_performance_assessment_3dd03aa3fb.jpg" alt="Eurachem: Table 1 - Scoring for performance assessment." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Table_1_Scoring_for_performance_assessment_3dd03aa3fb.jpg 245w," sizes="100vw" width="1390" height="571"><h3>Performance assessment&nbsp;</h3>All performance assessments are based on the difference between the participant’s results (xi) and the assigned value (xpt) divided by a normalisation factor (Table 1).&nbsp;<ul><li>The percent difference D% is the normalised difference expressed as a percentage of xpt , for which a prescribed maximum relative permissible error (dE% = dE / xpt) is defined by the PT provider.&nbsp;</li><li>The z score (unitless) compares the participant’s deviation from the assigned value with the standard deviation for proficiency assessment (spt). When the uncertainty of the assigned value is significant (u(xpt) &gt; 0.3 spt), the z’ score should be used instead, to include the contribution of u(xpt) in the denominator.&nbsp;</li><li>The zeta (ζ) score (unitless) states whether the laboratory’s result agrees with the assigned value within the respective uncertainty. The denominator is the combined (standard) uncertainty of the assigned value u(xpt) and the (standard) measurement uncertainty reported by the laboratory u(xi). An unsatisfactory zeta score can either be caused by an inappropriate estimation of the measured quantity value (e.g. concentration, content), or of its measurement uncertainty, or both.&nbsp;</li><li>The En score (unitless), unlike the zeta score, uses a combination of expanded uncertainties as the normalisation factor. This combination corresponds to a confidence interval of approximately 95 %. En scores are often used in metrology comparisons among calibration laboratories.</li></ul><h3>Interpretation of performance scores&nbsp;</h3>According to ISO 13528:2022 clause 9.4.2, the conventional interpretation of the z, z’ and ζ scores is as follows:&nbsp;<ul><li>A result that gives |score| ≤ 2.0 is considered to be acceptable, indicating satisfactory performance.&nbsp;</li><li>A result that gives 2.0 &lt; |score| &lt; 3.0 is considered to give a warning signal, indicating questionable performance.&nbsp;</li><li>A result that gives |score| ≥ 3.0 is considered to be unacceptable (or action signal), indicating unsatisfactory performance.&nbsp;</li></ul>Similarly, |En| &lt; 1 and |D%| &lt; dE% indicate successful (acceptable) performance.

Understanding PT performance assessment

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 15th June 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you technical note by Agilent Technologies, application note by Shimadzu and other document by Thermo Fisher Scientific!<h3>1. Agilent Technologies: Smooth Migration from Single Quadrupole ICP-MS to the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=9500">Agilent 9500 ICP-QQQ</a></h3>Automated method transfer using the Batch Conversion Tool of Agilent OpenLab ICP-MS software<ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/te_batch_conversion_tool_9500_icp_ms_5994_9214en_agilent_0a1bba76e2.pdf">Full PDF for download</a></li></ul>Transitioning from a single quadrupole (SQ) ICP-MS to a triple quadrupole ICP-MS (ICP-QQQ) might appear daunting or disruptive, usually requiring the redevelopment of analytical methods and workflows. Users often wonder if they can reuse existing batches and whether routine processes will be interrupted during this switch.&nbsp;Switching from SQ ICP-MS to the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=9500">Agilent 9500 ICP-QQQ</a> involves minimal disruption. Agilent provides a solution that enables smooth, automated transfer of existing SQ ICP-MS methods to the 9500 ICP-QQQ, all while preserving the current batch logic and analytical purpose.This note explains how the Batch Conversion Tool in Agilent OpenLab ICP-MS software facilitates automated batch conversion. It allows users to seamlessly transition from SQ ICP-MS to the 9500 ICP-QQQ without needing to rebuild methods or alter their existing workflows.&nbsp;Three key aspects of method migration are addressed in this document:&nbsp;<ul><li>The design concept and conversion behavior of the Batch Conversion Tool, detailing which batch elements are preserved or adapted during conversion.&nbsp;</li><li>It also explains the rationale behind the available conversion options and how the advanced cell technologies of the 9500, such as Advanced Helium Mode (AHM) and Air cell mode, support operational continuity and potential performance improvements after migration.&nbsp;</li><li>Additionally, it outlines a typical end-to-end migration workflow, including methods for reviewing the postconversion process and assessing data quality using built-in indicators.&nbsp;</li></ul>These points collectively show that switching from SQ ICP-MS to the 9500 ICP-QQQ can be seamless. They also illustrate how to carry out method transfer in a controlled and transparent manner, providing a practical framework for refining the method when necessary.<h4>What is the Batch Conversion Tool?&nbsp;</h4>The Batch Conversion Tool is a feature of OpenLab ICP-MS software that transforms batches created for Agilent SQ ICP-MS systems into formats compatible with the 9500 ICP-QQQ (see Figure 1).&nbsp;Batches made for <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=7700">Agilent 7700</a>, <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=7800">7800</a>, <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=7850">7850</a>, and <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=7900">7900 </a>ICP-MS instruments using Agilent ICP-MS MassHunter or OpenLab ICP-MS software can be imported and converted. During this process, the tool applies predefined rules to produce a batch suitable for the 9500, all while maintaining the original batch setup.&nbsp;These conversion rules are based on Agilent’s over 10 years of experience in ICP-QQQ development and applications. By harnessing this expertise, the Batch Conversion Tool automatically implements optimal measurement conditions and reaction strategies for each analyte, ensuring strong interference control and consistent analytical performance post-migration.Manually recreating batch components like element selections, isotope settings, and QC configurations can be time-consuming. Alternatively, the Batch Conversion Tool automates this process, usually finishing within seconds.<h4>Conclusion&nbsp;</h4>The Batch Conversion Tool in Agilent OpenLab ICP-MS software allows for easy, automated transfer of existing SQ ICP-MS batches to the Agilent 9500 ICP-QQQ, without affecting current analytical workflows.&nbsp;By maintaining batch structure and analytical intent, users can switch to the 9500 ICP-QQQ without needing to rebuild methods or disrupt daily operations. The tool also offers structured conversion options to help users harness the advanced features of the 9500 platform.&nbsp;Additionally, migration from non-Agilent ICP-MS systems can be streamlined through element list import via the Method Advisor, providing an efficient way to create methods when transitioning to Agilent equipment. Overall, moving from SQ ICP-MS to the 9500 ICP-QQQ is a smooth, controlled process that ensures continuity and offers opportunities for method enhancement.<h3>2. Shimadzu: Static Puncture Strength of Geotextile Products Usinga 50mmProbe</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_07_2603_en_2470aa6ee5.pdf">Full PDF for download</a></li></ul>Geotextiles are permeable geosynthetic materials, typically made from polypropylene or polyester, available in woven and non-woven forms. They provide separation, filtration, drainage, and reinforcement, improving soil stability, load distribution, and the durability of infrastructure such as roads, railways, embankments, landfills, and retaining structures.&nbsp;During transportation, installation, and service geotextiles can be exposed to concentrated loads and sharp objects which can reduce the effectiveness of materials therefore puncture resistance is a critical parameter for evaluating geotextile durability. The puncture resistance of geotextiles are commonly determined as per ASTM D62411) and ISO 122362), which measures the force required to penetrate the fabrics using a standard plunger. Overall, puncture resistance testing plays a vital role in ensuring the long-term durability and reliability of geotextilesin demanding engineering applications.&nbsp;The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=AGS-X2">Shimadzu AGS-X2 series Universal Testing Machine </a>is a high-precision universal testing system designed for accurate evaluation of mechanical properties such as tensile, compression, and puncture resistance. It features advanced control technology, high data acquisition rates, and reliable load measurement, ensuring consistent and reproducible results. The system is operated using TRAPEZIUMX-V software, enabling efficient test control, data acquisition, and analysis that complies with national and international standards.<h4>2. Test Method&nbsp;</h4>The test was conducted on the non-woven geotextile using the AGS-50kNX2D UTM, shown in the Figure 1. Two different samples (1000 and 400 GSM) were procured from the market and five specimens were prepared from various areas of each sample. Table 1 shows testing apparatus and test conditions and Figure 2 shows the typical clamping and loading system.<h4>4. Conclusion</h4>The test results are consistent across multiple specimens and exhibit gradual deformation behavior. This indicates that the material can withstand high penetration forces without sudden failure, demonstrating its ability to effectively resist localized stresses.&nbsp;Geotextiles are available in different GSM values, representing mass per unit area and directly influence their mechanical and physical performance. Lower GSM geotextiles are lighter, flexible and lower thickness making them suitable for applications involving moderate loads. In contrast higher GSM geotextiles are thicker and denser, offering significantly higher puncture resistance and making them suitable for heavy duty applications.&nbsp;The Shimadzu’s universal testing machine AGS-X2 series demonstrated accurate, stable, and repeatable performance for conducting puncture resistance testing in accordance with ASTM D6241 and ISO 12236. The system provided precise control of crosshead speed, reliable load measurement, and clear identification of the initial peak load as required by the standard. The high-resolution load–displacement data acquisition enabled accurate determination of puncture strength and displacement at maximum force. Overall, the Shimadzu system ensures compliance with ASTM D6241 and ISO 12236 requirements and offers a dependable solution for quality control, research, and material comparison of geotextiles.¨<h3>3. Thermo Fisher Scientific: Small parts analysis with the Niton Apollo LIBS Analyzer</h3><ul><li>Other document (Smart note)</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/small_parts_analysis_with_the_niton_apollo_libs_analyzer_sn1608_en_c69d4c0695.pdf">Full PDF for download</a></li></ul>Small parts and precision components are critical to product quality and safety. Their limited surface areas and complex geometries make them some of the most challenging items to analyze accurately. Traditional optical emission spectroscopy (OES) delivers excellent accuracy but often lacks the portability needed for challenging environments.&nbsp;The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2000">Thermo Scientific™ Niton™ Apollo™ Handheld Laser-Induced Breakdown Spectroscopy (LIBS) Analyzer</a> changes the equation by delivering accurate analysis of steel and stainless steel in a portable format.<h4>A lower cost of ownership, with repeatability and reliability you can trust&nbsp;</h4>For industries where a single incorrect part can have significant consequences, consistency is crucial. The Apollo analyzer delivers the dependable features you need, in a unit designed to save users time and money over the long term:&nbsp;<ul><li>Carbon detection – Detects carbon for equivalent carbon content (C.E.) for welding &amp; L/H grade ID of stainless steel&nbsp;</li><li>Efficient argon use – Optimized purge minimizes gas consumption.&nbsp;</li><li>Reduced downtime – Portable OES-like accuracy eliminates long lab lead time.</li><li>Rugged durability – Field-ready build lowers repair and replacement costs.&nbsp;</li><li>Ease of training – Intuitive interface reduces errors and onboarding costs.</li><li>Designed to perform – Reliable data across a wide range of finishes and geometries&nbsp;</li></ul>By combining technical performance with durability and efficiency, the Apollo analyzer delivers the lowest total cost of ownership in its class.&nbsp;<h4>Conclusion&nbsp;</h4>The Niton Apollo LIBS analyzer sets the standard for small parts analysis. With its unique argon seal and updated small nose design, it delivers repeatable, OES-like accuracy unmatched by any other handheld LIBS device for the analysis of steel and stainless-steel including carbon. Add in a lower total cost of ownership, and the Apollo analyzer becomes the clear choice for manufacturers and inspectors who demand precision, reliability, and value.

News from LabRulezICPMS Library - Week 25, 2026

Article

Application

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Metrohm

Agilent Technologies

AZoM

Bruker

Thermo Fisher Scientific

IR spectroscopy is a ubiquitous analytical technique that was first used during World War II. Since that time it has undergone significant development, providing a means for the analysis of many types of samples both in the laboratory and in the field.
This session will focus on the theory of Infrared and will discuss some modern infrared analytical techniques.
<blockquote>
Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: A Discussion on the Theory of IR Spectroscopy

A Discussion on the Theory of IR Spectroscopy

This session will focus on the theory of Infrared and will discuss some modern infrared analytical techniques.

The Southern California Coastal Water Research Project (SCCWRP) SOP outlines the steps for the analysis of microplastics using IR technology.
This presentation will discuss how the LDIR can be used to automate the analysis of microplastics, following the analytical steps prescribed by the SOP. 
 
<blockquote>
Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: Infrared Analysis of Microplastics as Prescribed by the Southern California Coastal Water Research Project (SCCWRP) SOP, Using the Agilent 8700 LDIR

Infrared Analysis of Microplastics as Prescribed by the Southern California Coastal Water Research Project (SCCWRP) SOP, Using the Agilent 8700 LDIR

This presentation will discuss how the LDIR can be used to automate the analysis of microplastics, following the analytical steps prescribed by the SOP. 

Infrared Analysis of Microplastics by Agilent 8700 LDIR

Agglomeration of ingredients in tablets is a concern for formulators.
It is typically observed using Raman spectroscopy, an extremely time-consuming technique. This presentation will discuss an alternative to Raman, i.e., &quot;Laser Direct Infrared Imaging&quot;, which provides rapid imaging of content distribution in tablets.
<blockquote>
Presenter: Louis Tisinger (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: Convenient Way to Evaluate Content Distribution in Solid Dosage Forms

Convenient Way to Evaluate Content Distribution in Solid Dosage Forms

An alternative to Raman, i.e., "Laser Direct Infrared Imaging", which provides rapid imaging of content distribution in tablets.

Evaluate Content Distribution in Solid Dosage Forms

Incoming materials inspection, or <a href="https://icpms.labrulez.com/webinars?search=raw+materials+identification+RMID">raw materials identification</a> (RMID), is critical to the production of high-quality industrial products. 
While spectroscopic RMID tests are often used in the chemical industry, they are less common in the polymer industry because many of the samples are not well-suited to commonly deployed technologies like <a href="https://icpms.labrulez.com/webinars?search=Raman">Raman</a> and <a href="https://icpms.labrulez.com/webinars?search=FTIR">FTIR</a>. This forces companies to either trust the label or rely on traditional wet-chemical tests for materials testing.
During this webinar, Omar Sallouh, Head of Quality Assurance &amp; Process Engineering at Rampf Polymer Solutions GmbH &amp; Co. Kg presents a faster and safer approach for quality testing of polyols, isocyanates and silicones. He has successfully implemented <a href="https://icpms.labrulez.com/webinar/2266">Near-Infrared</a> (NIR) spectroscopy in the QC laboratory to rapidly identify incoming materials and quantify their critical quality attributes.
Mr. Sallouh joins Dr. Adam J. Hopkins, Spectroscopy Product Manager at Metrohm USA, who will give a brief introduction to NIR, focusing on its advantages for material identification and comparing with alternative technologies. The event closes with a Q&amp;A session to address any questions asked during and after the webinar.
<blockquote>
Presenter: Omar Sallouh, M.Sc. (Head of QA &amp; Process Engineering, Rampf Polymer Solutions GmbH &amp; Co. KG)
</blockquote>
<blockquote>
Omar Sallouh has been working for RAMPF Polymer Solutions since 2018. He is responsible for Quality Assurance and Process Engineering.
</blockquote>
<blockquote>
He has a Master of Science in Chemistry from the Technical University of Dortmund.
</blockquote>
<blockquote>
Presenter: Adam J. Hopkins, PhD (Spectroscopy Product Manager, Metrohm USA)
</blockquote>
<blockquote>
Dr. Adam J. Hopkins has nearly 20 years of experience as a spectroscopist. He got his Ph.D. in chemistry from the University of Oregon where he studied nonlinear optical spectroscopy under Geraldine Richmond. Prior to joining Metrohm USA, Adam worked developing spectroscopic solutions for standoff and noncontact sensing applications using Laser Induced Breakdown and Raman spectroscopy. Dr. Hopkins is a member of the American Chemical Society, Society for Applied Spectroscopy, Coblentz Society, and SPIE. He is the author of 19 papers and proceedings and is the author of three patents.
</blockquote>

Metrohm: Guaranteeing Product Quality: NIR Inspection of Polyols, Isocyanates and Silicones

Guaranteeing Product Quality: NIR Inspection of Polyols, Isocyanates and Silicones

Faster and safer approach for quality testing of polyols, isocyanates and silicones using Near-Infrared (NIR) spectroscopy

NIR Inspection of Polyols, Isocyanates and Silicones

In this session, imaging of of phamaceutical ingredients in tablets will be discussed. This technique is a tool &nbsp;that provides a means for fomulators to assess whether ingredints are evenly distributed across a tablet's surface. All steps of the analysis will be described and a commercial &nbsp;tablet will be analyzed.&nbsp;<blockquote>Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.</blockquote>

Agilent Technologies: Simplified Measurement of Content Distribution of Pharma Tablets

Simplified Measurement of Content Distribution of Pharma Tablets

Content distribution of entire pharma tablets can be quickly measured using the component-specific workflow of the LDIR.

Measurement of Content Distribution of Pharma Tablets

The development of next-generation advanced materials requires analytical tools that cover multiple hyphenated techniques to save material usage while gaining additional analytical insight from the sample.
In this talk, we will explore various applications across R&amp;D.
<blockquote>
Presenter: Ron Rubinovitz (Senior Application Scientist, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Dr. Ron Rubinovitz earned his Ph.D. in Physical Chemistry at the University of Pennsylvania. Currently, he is a senior applications scientist at Thermo Fisher Scientific, focusing on FTIR, IR microscopy, FT-Raman, Near-IR, and chemometrics. Ron has extensive experience in the field of vibrational spectroscopy. He has worked with a wide range of sampling techniques covering applications in pharmaceutical, industrial, and food industries.
</blockquote>

Thermo Scientific: Pushing the Boundaries in Material Research

Pushing the Boundaries in Material Research

This workshop will show the workflow of analyzing a microplastic sample on the Agilent 8700 Laser Direct Infrared Imaging (LDIR). The sample format for introduction into the instrument will be discussed, as well as a description of system operation.<blockquote>Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.</blockquote>

Agilent Technologies: Agilent Webinars On Demand

Microplastics Identification: Tips & Tricks Workshop

This workshop will show the workflow of analyzing a microplastic sample on the Agilent 8700 Laser Direct Infrared Imaging (LDIR). 

<div><div><div><div><div><div><div><div><div>FT-IR technique is an indispensable analytical tool in most chemical labs, analytical centers and quality control departments. FT-IR spectroscopy is an ease to use and non-destructive analytical method for verification, identification or quantification. To face the daily challenges arising from high sample amount, unknown materials and multiple (maybe unexperienced) users, you need a highly flexible FT-IR spectrometer with user-friendly automation and outstanding performance.Bruker cares about your need and presents you the INVENIO spectrometer platform to make your daily work easy and convenient. In the upcoming free-of-charge webinar on the 18th of March we will focus on the difficulties in analytical labs and explain which features of INVENIO can help in such situations.&nbsp;<h5>Key Learning Objectives</h5></div><div><div><div><div><div><div>The latest advances in the instrumentation and applications of vibrational spectroscopy for the chemical analysis of surfaces will be reviewed in this presentation with a thorough discussion of the following topics:<ul><li>Surface characterization techniques: ATR (attenuated total reflection), including GATR (grazing angle germanium ATR): External (specular) reflection, including IRRAS (infrared reflection and absorption spectroscopy); and DRIFTS (Diffuse Reflection Infrared Fourier Transform Spectroscopy)</li><li>Characterization of thin films and molecular monolayers deposited onto metallic, semiconductor, and dielectric substrates</li><li>Heterogeneous gas-solid catalysis studies of gases interacting with catalytic surfaces</li><li>Optimization of FT-IR instrument parameters for surface analysis</li><li>Techniques to reduce the spectral contribution of atmospheric water and CO2</li></ul><blockquote>Presenter: Dr. Sergey Shilov (North America Product Manager, Science Business Unit, Bruker Optics)<div>Dr. Sergey V. Shilov is a Product Manager for North America at Bruker Optics. Sergey joined Bruker in 2001. He is responsible for the support and development of new applications for the Bruker research FTIR systems. He received his Ph.D. in 1992 from the Russian Academy of Sciences in Polymer Physics and his M.S. from St. Petersburg State University (Russia) in Physics in 1986. Alexander Von Humboldt Foundation (Germany) awarded him a research fellowship in 1996. Sergey published 37 papers in peer-reviewed journals. His research interests include time-resolved FTIR spectroscopy, surface science, polymer, and life-science applications.&nbsp;</div></blockquote></div></div></div></div></div></div></div></div></div></div></div></div></div></div>

Bruker: Analysis of Surface Chemistry by FT-IR Spectroscopy

Analysis of Surface Chemistry by FT-IR Spectroscopy

Bruker cares about your need and presents you the INVENIO spectrometer platform to make your daily work easy and convenient.

<div>Photothermal AFM-IR can provide nanoscale chemical information with highly resolved IR spectra, that directly correlate to FTIR transmission spectroscopy. This webinar covers numerous AFM-IR applications in the field of life sciences, illustrating broad applicability for samples from tissue to single protein fibrils. The speaker also discusses issues, challenges, and potentials of correlative measurements.Some of the samples and applications presented include:<ul><li>Lipids bodies stored in microorganisms</li><li>Abnormal accumulations in kidney biopsy</li><li>Penetration of nanocarriers in tissue or model cell lines</li><li>Protein nano-assemblies structures</li></ul>The speaker discusses the new experimental approaches developed to solve problems encountered during these studies, and the efforts to overcome technical constraints imposed by the system itself, such as:<ul><li>Configuration of illumination</li><li>Sensitivity</li><li>Soft-sample damage</li></ul></div>

Bruker: Photothermal AFM-IR Spectroscopy and Imaging for Life Science

Photothermal AFM-IR Spectroscopy and Imaging for Life Science

This webinar explores AFM-IR applications in life sciences, showing its wide use from tissue samples to single protein fibrils.

Photothermal AFM-IR for Life Science Spectroscopy & Imaging

In this webinar, you will learn about the analytical techniques and best practices for testing polymer-based advanced materials, from early R&amp;D through to production quality control. Discover how to leverage both macro- and micro-level IR analysis to optimise formulations and enhance material performance. Learn how to maximise the value of your thermal analysis instrumentation to diagnose production issues, evaluate VOCs, and support reverse‑engineering projects.This webinar is highly relevant to key industrial markets working with adhesives, sealants, coatings, paints, and 3D‑printing additives. Technologies covered will include FTIR, TGA, and hyphenated techniques such as TG‑IR and TG‑IR‑GC/MS.Join the free webinar with certification of attendance and CPD points now. &nbsp;<h4>Attend the Webinar to Learn:&nbsp;</h4><ul><li>Which analytical techniques and best practices are most effective for characterising polymer‑based advanced materials</li><li>How to apply macro‑ and micro‑level IR analysis, alongside thermal analysis, to optimise formulations, enhance performance properties, and diagnose production issues.</li><li>Benefits of hyphenated techniques (TG‑IR and TG‑IR‑GC/MS) for real‑world applications</li></ul><h4>This Webinar is Ideal For:</h4><ul><li>Materials scientists</li><li>Polymer researchers</li><li>Lab managers</li><li>Meet the Webinar Speakers</li></ul><blockquote>Speaker: Nicholas Lancaster (Application scientist, PerkinElmer)Nic is an application scientist in the R&amp;D team at PerkinElmer. With a background in materials characterization using FTIR &amp; UV/Vis spectroscopy, thermal analysis as well as chromatography and mass spectrometry he has been a part of PerkinElmer since 2014. He joined PerkinElmer as a Field Application Scientist (FAS) in South Africa, and now works from the UK developing laboratory workflow solutions for a range of end markets including renewable energy, lubricants, and advanced materials.Speaker: Dr Krystelle Mafina (Product leader, PerkinElmer)Krystelle is a product leader at PerkinElmer, overseeing the thermal (TEA) analysis business. She holds a PhD in Biomedical Biomaterials Science and is a Chartered Engineer (CEng) and Chartered Scientist (CSci) with a strong background in materials science. A member of the Institute of Materials, Minerals, and Mining (IOM3) since 2009; a committee member since 2019, Krystelle is committed to continuous professional development and was recently made 'Fellow' of the institute. Her blend of scientific knowledge and industry experience makes her a valuable contributor to PerkinElmer and the wider scientific community.</blockquote>

Azom: Analysis Masterclass for Polymer-Based Advanced Materials

Analysis Masterclass for Polymer-Based Advanced Materials

Which analytical techniques and best practices are most effective for characterising polymer‑based advanced materials