Alloys are formed when a metal is combined with another element to strengthen the base metal’s properties. Basically, an alloy is just a modified metal. Superalloys are similar, but these specific high-performance materials are held to a higher standard. They are typically nickel-based, cobalt-based, titanium-based, or iron-based.&nbsp;To be classified as a superalloy, the alloy must be able to reliably function under extremely high temperatures, possess superior strength and surface stability, and must be resistant to thermal creep deformation. Strong corrosion and oxidation resistance are also features of superalloys, but it’s important to note that they are not impervious to oxidation over time if protective measures are not taken. Unfortunately, even when protective measures are taken, contaminants like sulfur threaten to render that protection useless.<h4>Why is Protection from Oxidation Important?</h4>Oxidation negatively affects a superalloy by weakening its strength, which over time can lead to embrittlement and cracking. Since high-performance materials like superalloys are mainly used and relied on in industries like aerospace and nuclear energy, it is crucial that these materials perform as intended. Material failures could be the difference between life and death, in some circumstances.<h4>Selective Oxidation</h4>To make superalloys even more indestructible and shield against oxidation, selective oxidation is performed. With selective oxidation, superalloys are designed to oxidize in a way that creates a protective layer of oxidized material that “covers” the alloy, keeping the alloy’s inner structure from oxygen invasion. However, this means that in order to keep protecting the superalloy’s infrastructure, the protective oxidized layer needs to remain stable and intact.<h4>Sulfur: A Dangerous Threat</h4>The presence of sulfur, even at trace levels, can interfere with the selective oxidation process. Sulfur degrades that protective layer, leaving the superalloy vulnerable to negative oxidation and shortening its useful lifespan. Therefore, the accurate determination of sulfur content, down to the tenth of a microgram, is paramount for ensuring optimal performance and longevity in superalloys.<h4>A Combustion Technique for Ultimate Confidence</h4>Historically, the only way to accurately determine ultra-low levels of sulfur was with<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1842"> glow discharge mass spectrometry (GD-MS)</a>, due to its high sensitivity. Now, even combustion methods can be used when paired with the right instruments, like<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1879"> LECO’s CS844ES.</a>&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_844_Analyza_uhliku_a_siry_spalovaci_metodou_18532af2ef.jpg" alt="LECO: Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental: LECO 844 Series Combustion Analysis for Carbon and Sulfur." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_844_Analyza_uhliku_a_siry_spalovaci_metodou_18532af2ef.jpg 139w," sizes="100vw" width="710" height="792">The CS844ES uses high-frequency combustion and intelligent carrier gas management with infrared detection to reach a detection limit of approximately 0.1μg, guaranteeing even trace amounts of sulfur will be detected and ensuring confident quality control of superalloys. The sensitivity, ease-of-use, and speed of this instrument make it a reliable tool for any lab. Plus, the cost of combustion instrumentation is significantly lower than GD-MS, making it a practical choice as well.<h4>More About Sulfur and Superalloys</h4>Since superalloys make up fundamental parts of aerospace equipment, medical devices, and more, knowing that they will perform as they are supposed to is paramount. Feeling confident in sulfur level results can be achieved through specialized combustion techniques, avoiding costly GD-MS.&nbsp;To learn more about LECO’s CS844ES, <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/CS_844_844_ES_S_STEEL_NICKEL_SUPERALLOYS_203_821_540_9f6feba049.pdf">download this app note</a> that details how the instrument performed when testing steel, nickel, and superalloys. You can also <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1879">visit our website</a> to read more about the instrument and<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/209_214_5c92613a24.pdf"> download a brochure.</a> To learn more about how LECO serves the high-performance materials industry, visit our<a target="_blank" rel="noopener noreferrer" href="https://www.leco.com/applications/high-performance-materials/"> High Performance Materials Resource Hub.</a>

Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental

The standard uncertainty arising from random effects is often derived from repeated experiments and is quantified in terms of the standard deviation s of the measured values of the quantity. If it is the standard uncertainty arising from random effects on a single measurement that is required, then the observed standard deviation s is used without change. However, for a result which is the mean x of n measurements the standard uncertainty decreases as n increases, so that:<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Using_repeated_measurements_to_improve_the_standard_uncertainty_equation_1_19f8f07f8f.jpg" alt="Eurachem: Using repeated measurements to improve the standard uncertainty - Equation 1" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Using_repeated_measurements_to_improve_the_standard_uncertainty_equation_1_19f8f07f8f.jpg 245w," sizes="100vw" width="485" height="138">Example 1 shows how Eq (1) applies when estimating the uncertainty of a mean value, but not when considering the uncertainty of individual observations.<blockquote>Example 1 A volumetric pipette is calibrated with 12 measurements; the mean and the standard deviation are calculated. Eq. 1 applies to estimate the standard uncertainty of the mean value. However, when using the pipette to deliver one aliquot, Eq. 1 does not apply and the standard uncertainty due to random variation on this single measurement is the standard deviation s</blockquote>For Eq (1) to be valid, it is a requirement that all the measurements are independent and from a stable test sample under the same measurement conditions. The measurement conditions for all the measurements could be, for example, 1) repeatability conditions, 2) intermediate precision (within laboratory reproducibility) conditions or 3) reproducibility conditions&nbsp;It is very important to be aware that the standard uncertainty given by Eq. 1 only gives the estimated uncertainty due to random variation under the conditions of measurement under which the observations were taken, and is only strictly valid for independent observations.&nbsp;It can be hard to decide whether observations are sufficiently independent for Eq. 1 to apply, as there is no simple, general, rule. The following paragraphs therefore give examples of different circumstances to help identify circumstances when Eq. 1 can safely be used.<h3>Example where Equation (1) applies&nbsp;</h3><h4>Measurement of inhomogeneous samples&nbsp;</h4>If inhomogeneity for test samples is a major part of the uncertainty the analyst may choose to measure more test portions from each test sample in order to reduce the standard uncertainty. If all these measurements are made under repeatability conditions, i.e. the same measurement conditions following the whole procedure, including repeated random sampling from the test sample, the standard deviation of the mean, given by Eq. (1), should be used to estimate the uncertainty arising from variation under repeatability conditions.&nbsp;<h3>Examples where Equation (1) does not apply&nbsp;</h3>The following paragraphs give two examples where neither the standard deviation nor the standard deviation of the mean can be directly applied without further analysis of the data.&nbsp;<h4>Measurements taken in groups&nbsp;</h4>One example is when we have data from internal quality control from a measurement procedure that includes a calibration before analysis each day. We want to calculate the standard uncertainty of the mean value used to set the central line in the QC chart. The data consist of duplicate QC measurements performed on a stable test sample each day over a longer period of time (say, p days), giving a total of 2p observations; that is, p groups of two measurements. Because each pair of duplicate measurements has a single calibration error in common; the duplicates within the data set are not strictly independent and Eq. (1) cannot be directly used for all 2p observations. The uncertainty of the mean can most easily be calculated by taking the standard deviation of the p means for each day and dividing that standard deviation by √p . Analysis of variance can also be useful in similar cases. Similar principles apply to other kinds of grouping, including grouping by operator, instrument etc.&nbsp;<h4>Measurement when the test item or measurement system is not stable over time</h4>Another common example is time dependent data. The time dependence could be due to instrument drift or to actual change in concentration by time. In such cases the error for a given observation is partly random and in part ‘carried over’ from the previous observation. Again the errors affecting each observation are not independent because some part of the error is common to successive observations; Eq. (1) can not be used and more complex statistical techniques, that allow for correlation, must be used to process the data.&nbsp;For further guidance on the treatment of correlated data in uncertainty evaluation, see Eurolab Technical Report 1/2006: Guide to the Evaluation of Measurement Uncertainty for Quantitative Test Results, Appendix A.5

Using repeated measurements to improve the standard uncertainty

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 27th July 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: High-Precision Determination of Phosphorus and Potassium in Fertilizers by ICP-OES</h3>Accurate nutrient analysis of fertilizers using an <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=5800">Agilent 5800 ICP-OES</a> and standard bracketing<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_fertilizers_standard_bracketing_5800_icp_oes_5994_9311en_agilent_83cbca87fd.pdf">Full PDF for download</a>&nbsp;</li></ul>Accurate characterization of fertilizer nutrient content is critical for optimizing plant growth, maximizing yield, and ensuring sustainable agricultural practices. Fertilizers must comply with strict regulatory specifications, particularly for declared NPK (nitrogen–phosphorus–potassium) ratios, which define the relative nutrient content supplied to crops. Even small deviations from the specified ratio can impact plant yield, regulatory compliance, customer confidence in the product, as well as its commercial value.&nbsp;Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) is a well-established technique for multi-element analysis of complex samples, so is ideally suited to meet the precision and accuracy requirements of fertilizer testing.1,2 However, applications that require very tight tolerances, such as NPK verification, benefit from enhanced calibration approaches as even small deviations from reported values can have large financial implications for the manufacturer.Using Agilent ICP-OES instruments, standard bracketing calibration based on a standard–sample–standard measurement sequence, minimizes the impact of sample-to-sample variability and matrix effects.3,4 This approach further improves analytical precision and accuracy compared to conventional external calibration, making it a particularly valuable method for analyzing fertilizers with tightly controlled specifications.&nbsp;In this study, an Agilent 5800 Vertical Dual View (VDV) ICP-OES, equipped with an Agilent SPS 4 autosampler and controlled using Agilent ICP Expert Pro software,5 was used to determine P and K concentrations and corresponding NPK ratios in a standard reference material (SRM) and two commercially available fertilizers. The standard bracketing method was adapted from ISO methods 11494 and 114956,7 and adjusted for fertilizer analysis. The performance of the method, when combined with real-time data processing tools, was evaluated for accuracy and precision.<h4>Experimental&nbsp;</h4><h5>Instrumentation&nbsp;</h5>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=5800">Agilent 5800 VDV ICP-OES </a>was configured with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=SPS+4+autosampler">Agilent SPS 4 autosampler</a>, which provided automated sample delivery to the instrument (Figure 1). The 5800 ICP-OES was equipped with an Agilent SeaSpray nebulizer, double-pass cyclonic spray chamber, and one-piece VDV torch with a 1.8 mm internal diameter (ID) injector. All components were controlled by Agilent ICP Expert Pro* software. Instrument operating parameters are listed in Table 1.<h4>Conclusion&nbsp;</h4>This study demonstrates the effectiveness of the Agilent 5800 VDV ICP-OES standard bracketing method for high-precision determination of phosphorus and potassium in fertilizers. The method delivered excellent performance, with relative standard deviations below 0.1% and excellent agreement with expected NPK values, with recoveries ranging from 99 to 102%. The combination of gravimetrically prepared standards, internal standard correction, and bracketing calibration minimizes analytical variability and ensures reliable results for fertilizer quality control.&nbsp;In addition, Agilent ICP Expert Pro software streamlines analysis through real-time calculations and automated quality control tools, improving laboratory efficiency and reducing the risk of reporting errors. This approach provides a robust and practical solution for high throughput fertilizer testing laboratories, enabling precise NPK verification that strengthens regulatory compliance, reduces the risk of mislabeling, and supports accurate product pricing.<h3>2. Shimadzu: Multifaceted Evaluation of Frozen Tempura Batter Coating Focusing on Food Texture</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00987_en_f919b540e7.pdf">Full PDF for download</a></li></ul>The “deliciousness” of foods consists of multiple factors, including taste, smell, and visual appeal. However, texture, sometimes called “mouthfeel,” is also one extremely important factor. Mouthfeel refers to the physical sensations experienced when food is placed in the mouth or chewed, and is expressed by various onomatopoeic words such as “crisp” and “chewy.” Among these, the packaging of some foods uses onomatopoeic terms to emphasize the appeal of their distinctive textures, and this has become an important “selling point” for consumers when deciding which product to select.&nbsp;In the development of food products, the method of evaluating texture has become a key point. Sensory methods have long been used, but because sensory evaluations depend on the human senses, they are easily influenced by differences between individuals conducting the evaluation and their physical condition.Thus, the difficulty in ensuring repeatability is an issue. As an additional issue, technical training for the panelists who conduct evaluations also requires time and labor. To compensate for these problems, evaluation methods based on measurement of physical properties with instruments may be used. This approach eliminatesthe human error that had been a problem with sensory evaluations, enabling objective evaluations.&nbsp;Food texture is also complexly influenced by the interactions of various factors, such as the ingredients contained in the food, their amounts, and the cooking method. Since differences in these factors may appear in the structure and surface condition of foods, observation and measurement of the internalstructure and surface condition of foods make it possible to analyze and understand the factors that contribute to texture, allowing more efficient food product development from the physical viewpoint. This article introduces an example of an analysis of the differencesin texture that occur due to differences in the heating method from the aspects of evaluation of physical properties and structural and surface observation, using frozen tempura asthe testsample.<h4>Experiment&nbsp;</h4>In this experiment, four instruments were used for evaluation of mechanical properties and structural and surface observation. Table 1 shows the names of the instruments, the purpose of the experiment, and the corresponding sectionsin this article. The test samples used here were commercially-available frozen tempura, which features “moistness” when prepared by microwave oven cooking and “crispness” after microwave oven + oven cooking. The “Moist” type is prepared by heating for 1 min in a microwave oven, and the “Crisp” type is prepared by additional heating in an oven after microwave heating. Since the heating time in the oven is adjusted depending on the sample size required by each instrument, the specific sample preparation procedure and the flow of the tests will be described in the sections concerning each instrument.<h5>Evaluation of Coating Surface Roughness by Laser Microscope&nbsp;</h5>The laser microscope was used in high-magnification measurements of the roughness of the sample surface and color observation (color images). It is possible to grasp the differences in the batter coatings of the “Moist” and “Crisp” types from changes in roughness and also changes in color. Fig. 11 shows the appearance of the OLS5500 laser microscope used here. In this instrument, optical resolution is enhanced by using a singlewavelength 405 nm laser beam, and topographical information can be acquired by reflective confocal laser microscopy. Color images of the same field can also be obtained by using a white LED.In this experiment, the samples were prepared by the following procedure in order to observe the same areas of the “Moist” and “Crisp” samples. First, the entire kabocha tempura was heated for 1 min in the microwave oven, after which part of the sample was cut off and observed on the stage (Fig. 12). Following this, the observed sample was heated in the oven and placed on the stage again, and the “Crisp” sample was observed (Fig. 13). To observe the shape of a wide area of the sample, an alignment (“tile-stitching”) function was used. The image acquisition condition was the ultra-high speed mode using a 20x objective lens.<h4>Conclusion&nbsp;</h4>A sensory evaluation and evaluation of physical properties using a texture analyzer, and structural observations from the macro to the micro level using an X-ray CT, laser microscope, and SEM were conducted for frozen tempura with different food textures depending on the heating conditions. The impression of the food texture, or “mouthfeel,” obtained in the sensory evaluation was quantified in the form of physical property values by using the texture analyzer, and the factors that formed the grounds for those numerical values were then evaluated based on the results of various types of observation. As a result, it was suggested that differences in food texture correspond to changes in the food structure and oil content.&nbsp;In this experiment, different samples were examined with four types of instruments. However, if physical property tests can be carried out with the samples as-is after observation of the same areas, a more direct and high accuracy analysis is considered to be possible. Moreover, in this experiment, the food texture was changed by using different heating methods, but in cases where the ingredients (flour, oil) or the deep-frying method is changed, there is a possibility that different factors from those in this study may contribute to the texture. As demonstrated in this experiment, although “food texture” is often grasped sensorily, as suggested by the term “mouthfeel,” this property can be visualized scientifically in terms of the structure and physical properties of the food and the condition of the oil content by combining multifaceted evaluations using multiple instruments. This technique is expected to become an effective approach for reproducing and controlling the target texture in food product development and quality design.<h3>3. Thermo Fisher Scientific: Bauxite analysis with Niton XRF analyzers</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/bauxite_analysis_with_niton_xrf_analyzers_an1795_en_93b319a76e.pdf">Full PDF for download</a></li></ul>Globally, bauxite is the primary source of aluminum (Al) ore and anchors a major industry in many countries, including China, Australia, and Brazil. As such, grading Al concentration is of paramount interest in the mine as is the need to determine concentrations of penalty elements. The desired goal is to conduct all the analysis in a way that maximizes productivity.&nbsp;<h4>Application&nbsp;</h4>Analysis of aluminum (Al), silicon (Si), and iron (Fe) presents unique challenges. Accurate analysis of all three is critical for ore grading and understanding their influence on the processing and production of the primary metal of interest. Relying on lab-analysis only in bauxite mining operation often results in costly time delays and reduced productivity while waiting hour if not days and weeks for the results.&nbsp;With the ruggedized, dust- and splash-proof <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1997">Thermo Scientific™ Niton™ XL3t GOLDD+ XRL Analyzer</a>, near lab-quality analysis of Al, Si and Fe can be generated on sites, enabling quick decisions in at remote mines. Indeed, the Niton XL3t GOLDD+ analyzer provides rapid and accurate elemental analyses of bauxite ore enabling to map chemical concentrations in realtime, identify excavation hotspots and detect penalty elements.&nbsp;<h4>Handheld XRF analyzer&nbsp;</h4>Thermo Scientific Niton Handheld XRF analyzers, including the Niton XL3 GOLDD+ analyzer, easily analyze elements from magnesium (Mg) to uranium (U) to fill all exploration and mining needs. These instruments make it easy to perform trend analysis by averaging readings in real-time or by downloading results later to a PC. They deliver fast, accurate elemental analysis for intensive metals exploration and production whether base metals, precious metals, or even rare earth elements.<h4>Comments&nbsp;</h4>The correlation coefficients and repeatability data for the key elements in bauxite analysis demonstrate the excellent accuracy and precision of the handheld Niton XL3 950 GOLDD+ analyzer, indicating that the Niton XL3 GOLDD+ instrument is ideal for fast mine or field analysis. The instant chemical information it provides allows the user to make critical decisions with minimal downtime, keeping projects running and productive. Additionally, they provide information that minimizes the expense and time of shipping samples for analysis and increases savings. The Thermo Scientific Niton XRF analyzer is a great addition to any process in the life of the mine.

News from LabRulezICPMS Library - Week 31, 2026

Article

Product

Application

Academy

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator for the American iron and steel industry.  Today, almost 80 years later, LECO is recognized globally as a leader in the development of high-quality analytical instrumentation, mass spectrometers, comprehensive two-dimensional chromatography, metallography & optical equipment as well as consumables.

LECO

Thermo Scientific MSA-330 Multi-Stream Slurry XRF Analyzer

Thermo Scientific MSA-330 (XRF) analyzer delivers elemental analysis (Ca–U) for up to 12 slurry streams, eliminating cross-contamination, with low operational cost and easy maintenance.

The Thermo Scientific™ MSA-330 Multi-Stream Slurry XRF Analyzer provides reliable, flexible, cost-effective elemental analysis for up to 12 slurry streams, delivering information for the monitoring and control (manual or automatic) of mineral beneficiation circuits. Keeping each stream in a separate analysis zone, it eliminates cross-contamination without any need for a multiplexer or demultiplexer, minimizing head loss and plant elevation requirements. Use the MSA-330 to monitor feed, concentrate and tailings grades, to drive up process efficiency, improve metal recovery, optimize reagent consumption, and reduce costs.The MSA-330 quantifies % solids and up to 20 elements for between 3 and 12 slurry streams according to a predefined schedule to deliver real-time process trend information for monitoring and control.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_MSA_330_Multi_Stream_Slurry_XRF_Analyzer_56ef33bd34.jpg" alt="Thermo Scientific™ MSA-330 Multi-Stream Slurry XRF Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_MSA_330_Multi_Stream_Slurry_XRF_Analyzer_56ef33bd34.jpg 156w," sizes="100vw" width="650" height="650"><h3>Key features include:</h3><ul><li>Capability to measure and provide composite samples for 3 to 12 slurry streams, for flexible, cost-efficient process monitoring.</li><li>Dedicated, separate path for each process stream, from sample point to sample discharge, for the elimination of cross-contamination and simplified sample return.</li><li>Low head design simplifies sample transport design and is advantageous for gravity feed or return of samples to the process.</li><li>Advanced energy dispersive X-ray detector, for accurate measurement from calcium to uranium with integrated Peltier cooler for reliable, trouble-free operation over a wide range of in-plant environmental conditions.</li><li>Cross-cut sampler for each stream provides sampling for analyser calibration and composite samples.</li><li>Optional vacuum filter station available for each of the composite samplers.</li><li>When fed from a SamStat30C, the dedicated cross-cut samplers in the MSA-330 can be used to acquire composite samples for material balancing and accounting purposes.</li><li>No multiplexer or demultiplexer delivers a flow head space solution, lowering implementation and operational costs for a centralized analyser system.</li><li>High flow capability, for handling the full flow of low flowrate process streams, eliminating additional costs associated with a sampler and sample delivery system. 300mm wide tank as standard with larger sizes available for higher flow rates.</li></ul>

Thermo Scientific™ ARL™ SMS-XY Automation for XRF

The Thermo Scientific™ ARL™ SMS-XY XRF system enables unattended operation, sample prep and analysis with high quality, efficiency, and reduced cost.

<div><div><h4>Increase your capacity to handle more samples in less time.&nbsp;</h4>The Thermo Scientific™ ARL™ SMS-XY Automation for XRF permits continuous and unattended operation of<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900"> Thermo Scientific™ ARL™ 9900 series X-ray Spectrometers</a>. Increased automation brings:&nbsp;<ul><li>Higher analysis quality</li><li>Lower analysis costs</li><li>Sustainable analysis cadence with predictable and reproducible response times</li><li>Short payback period</li></ul><h3>Automated Sample Handling</h3>The Thermo Scientific™ ARL™ OEM-XY automated sample loader allows connecting the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1211">ARL™ PERFORM'X</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900</a> series to fully automatic preparation machines. Key features:<ul><li>Prepared samples (usually pressed pellets) are transported via belt conveyor from press to spectrometer</li><li>Unattended operation is ensured by engineering software supervision</li><li>Suitable for cement, metallurgy, and mining applications</li></ul></div><div><h3>Complete Automation with ARL SMS Software</h3>The ARL SMS software provides full automation of Thermo Scientific™ XRF spectrometers for routine production control, including sample preparation and analysis.<h3>Key Benefits:</h3><ul><li>Regular analysis of control samples with SPC evaluation for anomaly detection</li><li>Online connectivity for automatic sample preparation</li><li>Supports up to two sample transfer systems</li><li>Allows manual or online registration of externally prepared samples</li><li>Available as turnkey solution in ARL™ QuantoShelter cabin for production floor deployment</li><li>Seamless integration into quality control and production processes</li><li>Automatic result transmission after analysis</li></ul><h3>Compatible Sample Types:</h3><ul><li>Metallic samples (ferrous and non-ferrous)</li><li>Oxides from metal production (ores, sinters, baths, slags, blast furnace slags)</li><li>Oxides from minerals and cement</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_XY_Automation_for_XRF_2_8bce1d83a2.jpg" alt="Thermo Scientific™ ARL™ SMS-XY Automation for XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_XY_Automation_for_XRF_2_8bce1d83a2.jpg 179w," sizes="100vw" width="650" height="569"></div></div>

Thermo Scientific ARL SMS-Omega XRF Instrument

Boost production efficiency with fully automated XRF analysis. The ARL OPTIM'X with SMS-Omega ensures high-quality results with unattended prep, rapid WDXRF, and compact design.

Keep up with production demands with automated XRF analysis. When different types of material have to be processed in parallel, the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL OPTIM'X™ WDXRF Spectrometer</a> with the Thermo Scientific™ ARL™ SMS-Omega XRF Instrument is the solution. Automatic sample preparation and handling without user intervention, combined with rapid analysis, provide high-quality results. This innovative solution has a compact footprint of less than 1 m², so it can be installed in centralized laboratories or on production shop floors, wherever fully automated industrial production control is needed.This cost-effective system is a unique combination of Thermo Scientific XRF and automation technology for fully automated sample preparation and analysis of one material type.<h3>Main Features</h3><ul><li>Unattended instrument monitoring and integrated audit trail functions</li><li>Sample handling arm equipped with a suction device (metals version) or a gripper (oxide version) loads samples for analysis.</li><li>Samples processed under strict identical and reproducible conditions</li><li>Fixed circular magazine</li><li>XRF functionality provided by the flexible and compact <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1212">Thermo Scientific™ ARL™ OPTIM'X WDXRF </a>Instrument</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_2_ee38dccfef.jpg 233w," sizes="100vw" width="650" height="435"><h3>Features of the OPTIM'X WDXRF Instrument</h3><ul><li>WDXRF platform with sequential and/or simultaneous capabilities</li><li>Configurable to cover all elements from fluorine (F) to uranium (U) in sequential mode</li><li>Fast analysis of solids, liquids and loose powders with superior spectral resolution</li><li>No water cooling or gas supply required (depending on configuration)</li><li>Closely coupled optics for increased intensity (50% higher than conventional geometry)</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg" alt="Thermo Scientific™ ARL™ OPTIM'X WDXRF Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_OPTIM_X_WDXRF_Spectrometer_b264a3a303.jpg 94w," sizes="100vw" width="650" height="1077"><h3>Features of the Fixed Circular Magazine</h3><ul><li>Eight positions for storing reference standards</li><li>Allows occasional manual introduction of prepared samples</li><li>One additional position dedicated to filing production samples following analysis</li><li>The complete system can also be supplied within a Thermo Scientific™ ARL™ QuantoShelter container for in situ analysis closer to the process.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg" alt="Thermo Scientific™ ARL™ SMS-Omega XRF Instrument" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_Omega_XRF_Instrument_87d53e64fb.jpg 216w," sizes="100vw" width="650" height="471">

Thermo Scientific ARL SMS-2300 Robotics-Based Automation for OES or XRF

Thermo Scientific™ ARL™ SMS-2300 enables fast, reproducible, and unattended OES/XRF analysis to optimize steel production and meet the strictest quality standards.

<h4>Meet stringent steel specifications while increasing efficiency and lowering production costs.</h4>The Thermo Scientific™ ARL™ SMS-2300 Robotics-Based Automation for OES or XRF is an automated quality control solution to optimize your steel production operation. With the high-performance ARL SMS-2300 system, even complex samples are prepared and analyzed under reproducible conditions without operator intervention, eliminating human variables and subjective factors. 👉 Result: Increased output, reliable results, and reduced costs.<h3>🔧 ARL SMS-2300 Automation for OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended 24/7 operation of:<ul><li>ARL™ 4460</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">ARL™ iSpark</a> / <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977">iSpark Plus OES</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">ARL™ 9900 XRF</a></li></ul><h3>✅ Main Features</h3><ul><li>Easy integration into fully automatic laboratories</li><li>Installed in ARL QuantoShelter, close to production process</li><li>Parallel tasking:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time</li></ul></li><li>High throughput with:<ul><li>Automatic sample preparation</li><li>Haas Mini Mill + ARL™ PrepControl™ + EasyPrep™ software</li></ul></li><li>Direct access to Haas Mini Mill for faster ferrous sample processing</li><li>Factory-configured and customized</li><li>Compact chassis, simple installation, and integrated electronics</li><li>High reliability, rapid ROI, and fast result availability</li><li>Frees lab personnel from routine tasks</li><li>ISO 9001 compliant manufacturing and maintenance</li></ul><h3>🚀 Advanced Technology</h3><ul><li>Fanuc industrial robot</li><li>OXSAS analytical software</li></ul>

Thermo Scientific ARL SMS-3300 Automation for Single or Twin OES or XRF

Thermo Scientific™ ARL SMS-3300 enables fully automated operation of one or two OES or XRF spectrometers, enhancing lab efficiency in industrial environments.

Drive process control laboratory efficiencies in the metals, mining and cement industries with the Thermo Scientific™ ARL™ SMS-3300 Automation for Single or Twin OES or XRF, a complete laboratory workflow automation solution. The automation of single or multiple spectrometers and preparation machines with the ARL SMS-3300 system offers:👉 Reduced sample analysis cost, 👉 Increased sample throughput, 👉 Better reproducibility, and 👉 Higher quality resultsfor users requiring more comprehensive and integrated automation solutions in the metals, mining and cement industries.<h3>🔧 ARL SMS-3300 – Automation for Single or Twin OES or XRF</h3>Provides ultimate power and flexibility for automatic, unattended, 24/7 operation of:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1213">Thermo Scientific™ ARL™ iSpark </a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1977"> iSpark Plus </a>(Optical Emission Spectrometers)</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?instrumentationItems=100&amp;manufacturerItems=3&amp;search=9900">Thermo Scientific™ ARL™ 9900</a> (X-ray Fluorescence Spectrometer)</li></ul><h3>✅ Main Features</h3><ul><li>Designed for easy integration into fully automatic laboratories</li><li>Can be mounted in Thermo Scientific ARL QuantoShelter, close to the production process</li><li>Parallel task execution:<ul><li>Sample preparation</li><li>Sample introduction</li><li>Analysis</li><li>Instrument stand cleaning performed in hidden time by the spectrometer, independently of the robot</li></ul></li><li>Direct access to milling machine for reduced processing times of ferrous samples</li><li>Higher throughput with:<ul><li>Automatic sample preparation</li><li>ARL™ PrepControl™ system + ARL™ EasyPrep™ software</li></ul></li><li>Factory configured and customized</li><li>Compact chassis and simple installation</li><li>Integrated electronics</li><li>Improved analysis reliability and quality</li><li>Very rapid payback</li><li>Faster result availability</li><li>Qualified lab personnel freed from routine tasks</li><li>Manufactured and maintained according to ISO 9001-2000 procedures</li></ul><h3>🚀 Advanced Technology</h3><ul><li>State-of-the-art Fanuc industrial robot</li><li>OXSAS analytical software</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg" alt="Thermo Scientific™ ARL SMS-3300 Automation for Single or Twin OES or XRF" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3300_Automation_for_Single_or_Twin_OES_or_XRF_fadcbb621a.jpg 245w," sizes="100vw" width="650" height="366">

Thermo Scientific ARL SMS-3500 Automation for Twin OES or XRF

The ARL SMS-3500 automates two OES or XRF spectrometers with smart sample flow management for fast, efficient, and continuous production control.

Drive process control laboratory efficiencies in the metals and mining industries with the Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF, a complete laboratory workflow automation solution. Primary metals producers' laboratories typically run two fully duplicate and separate spectrometry lines to assure fast response times when several urgent samples must be processed simultaneously. 👉 The ARL SMS-3500 system is an affordable alternative.The automation of multiple spectrometers and preparation machines with the ARL SMS-3500 system offers:<ul><li>Reduced sample analysis cost</li><li>Increased sample throughput</li><li>Better reproducibility</li><li>Higher quality results</li></ul>for users requiring more comprehensive and integrated automation solutions in the metals and mining industries.The ARL SMS-3500 Automation for Twin OES or XRF simplifies sample handling by providing:<ul><li>a single introduction location for all samples</li><li>a magazine storage function to free the introduction 👉 This reduces response times, increases sample processing cadence, and improves the availability of automatic sample preparation in highly critical production control environments.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg" alt="Thermo Scientific™ ARL™ SMS-3500 Automation for Twin OES or XRF - 2.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_ARL_SMS_3500_Automation_for_Twin_OES_or_XRF_2_0553f2880b.jpg 217w," sizes="100vw" width="650" height="469"><h3>✅ Main Features</h3><ul><li>No need for time-consuming electro-mechanical transfer systems – the SMS-3500 robot moves samples between components within seconds</li><li>Simplified operation and reduced system complexity for easier maintenance and servicing</li><li>Single interface screen for all sample tracking and automation functions</li><li>Unified registration and introduction point for all production samples, with automated routing to the appropriate system components</li><li>Support for two sample preparation machines:<ul><li>Reduces response times</li><li>Increases processing cadence</li><li>Improves automatic sample preparation availability</li></ul></li><li>Operator workload is reduced – the system manages samples by priority and availability of resources<ul><li>Includes internal sample storage to free the introduction point immediately</li></ul></li><li>Each instrument can be used offline for manual tasks without interrupting automated operation</li><li>Uses the same analytical software for XRF and OES</li><li>Automation is based on proven ARL SMS software</li></ul><h3>🔧 Recommended for:</h3><ul><li>Iron and steel applications</li><li>High alloy, stainless steel, copper, brass, and bronze applications</li><li>Aluminum or fire assay applications</li></ul>

Thermo Scientific IonicX Portable XRF Analyzer

Thermo Scientific™ IonicX enables fast and accurate salt analysis in raw materials using portable XRF without complex preparation or destructive testing.

<div><div>Identify ionic salts in seconds with minimal sample preparation. The Thermo Scientific™ IonicX™ Portable XRF Analyzer provides:<ul><li>Fast and accurate verification of ionic salt raw materials</li><li>High sample throughput for pharmaceutical and biopharmaceutical manufacturers</li></ul>Cut testing time and costs by replacing:<ul><li>time-consuming</li><li>resource-intensive</li><li>wet chemistry and benchtop methods</li></ul>with a ✅ non-destructive, ✅ non-contact, ✅ portable XRF analyzer for ionic salts.<h3>⚙️ Key Features</h3><ul><li>Portable verification of a wide range of ionic salts in seconds</li><li>Compliant with 21 CFR Part 11:<ul><li>electronic signatures</li><li>user access control</li><li>audit trails</li></ul></li><li>Non-destructive testing of raw materials</li><li>Minimal sample preparation</li><li>Simple operation, no extensive operator training required</li><li>Lightweight and compact design for easy portability</li><li>Wi-Fi enabled</li><li>Hot Swap Battery</li><li>IP54 Certified – splash and dust proof</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Ionic_X_Portable_XRF_Analyzer_2_aa24221e46.jpg" alt="Thermo Scientific™ IonicX Portable XRF Analyzer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Ionic_X_Portable_XRF_Analyzer_2_aa24221e46.jpg 156w," sizes="100vw" width="650" height="650"><h3>📏&nbsp;Specifications</h3><ul><li>Bluetooth: Supports print functionality and barcode reader</li><li>Camera:<ul><li>Macro Camera: Integrated CCD macro camera for capturing overview images of parts and tagging measurement locations</li><li>Micro Camera: Integrated CCD micro camera for locating and recording measurement positions</li></ul></li><li>Certifications/Compliance:&nbsp;<ul><li>EN 55011:2010</li><li>EN 61326:2013</li><li>FCC 47 CFR Part 15</li><li>Safety EN 61010; 2010 (3rd Ed) with national deviations for US and Canada</li><li>RoHS EN 50581; 2012</li></ul></li><li>Data Entry:&nbsp;<ul><li>Touchscreen keyboard</li><li>User customizable data entry</li><li>Optional wireless remote barcode reader</li></ul></li><li>Data Storage:&nbsp;<ul><li>512 MB internal system memory/16 GB industrial grade storage</li><li>Stores approximately 130,000 readings with spectra (fewer if macro and micro images are saved)</li></ul></li><li>Data Transfer: Wi-Fi, USB</li><li>Dimensions: 12 × 12 × 8 in. (30.48 × 30.48 × 20.32 cm)</li><li>Display Type: Tilting, color, resistive touchscreen display</li><li>IP Rating: IP54 (splash and dust proof)</li><li>Languages: English</li><li>Licensing: Varies by region; Contact your local distributor</li><li>Operating Environment:&nbsp;<ul><li>Temperature: 0°C to 50°C (external fan recommended when ambient temperature is greater than 33°C)</li><li>Humidity: 10% to 90% relative humidity non-condensing</li></ul></li><li>Operating System: Linux</li><li>Optional Accessories:&nbsp;<ul><li>Thermo Scientific portable test stand</li><li>Thermo Scientific mini test stand</li></ul></li><li>Power Consumption: 12V lithium-ion battery, or 12V DC, 3A, 3.6W power supply</li><li>Security Features: Password-protected user security</li><li>Software: IonicX PC software</li><li>Spot Size: Standard: 8 mm collimation</li><li>Standard Accessories:&nbsp;<ul><li>Locking shielded carrying case</li><li>Two (2) lithium-ion battery packs</li><li>One (1) 110/220 VAC battery charger/AC adaptor</li><li>Check samples</li><li>Safety lanyard</li><li>PC connection cable (USB)</li></ul></li><li>System Details: Built-in standardization via automatic system check</li><li>Weight (English): 5.8 lbs. with battery and test stand</li><li>Weight (Metric): 2.6 kg with battery and test stand</li><li>X-Ray Source Type:&nbsp;<ul><li>X-Ray Tube: Ag anode (6–50 kV, 0–500 μA, 5W max)</li><li>Dynamically adjustable current for optimal sensitivity on every analysis</li></ul></li><li>Applications: Raw Material Testing</li><li>Detector Type: Proprietary Large Area Drift Detector</li><li>Tube Voltage: 6 to 50 kV</li><li>Unit Size: Each</li></ul></div></div>

Thermo Scientific AnStat-330 Online Sampling and Elemental Analysis Station

The AnStat-330 provides real-time elemental analysis of slurries, improving metal recovery and eliminating delays and the need for sampling pumps.

The Thermo Scientific™ AnStat-330 Online Sampling and Elemental Analysis Station is a high availability, low head loss solution for:<ul><li>Metallurgical accounting</li><li>High-quality measurement of critical slurry streams in mineral processing plants</li></ul>It features an integrated analyzer and a full-flow, multistage, representative sampler, delivering:<ul><li>Accurate real-time assays</li><li>Enhanced control of flotation circuits, including:<ul><li>Flotation plant feed</li><li>Roughing and cleaning circuits</li><li>Final concentrates and tailings</li></ul></li></ul><h3>🔧 Key Advantages</h3><ul><li>Eliminates:<ul><li>Costly and unreliable sample transport systems</li><li>Measurement lag from cycle time delays and cross-contamination common with centralized analyzers</li></ul></li><li>Delivers:<ul><li>Reliable and rapid response to process upsets and feed fluctuations</li><li>Low head loss design, removing the need for sample pumps</li><li>Simplified flotation plant layout and installation</li></ul></li></ul><h3>⚙️ Operational Benefits</h3>Use the AnStat-330 to:<ul><li>Improve processing efficiency</li><li>Reduce life-of-mine OPEX for sampling and analysis</li><li>Lower energy consumption</li><li>Optimize reagent use</li><li>Improve metal recovery</li><li>Maximize Net Smelter Return (NSR)</li></ul><h3>📌 Key Features</h3><ul><li>Real-time elemental analysis and composite sampling for effective process control and metallurgical accounting</li><li>Very low head loss for simplified plant design – no sample pumps required</li><li>Advanced EDXRF detector (Ca to U), with Peltier cooling for stable, reliable operation in harsh environments</li><li>Versatile, compact system – easy to integrate into existing plants</li><li>24/7 high availability for both analysis and sampling</li><li>Multistage proportional sampling, including final-stage hardened cross-cut sampler for representative samples</li><li>Low maintenance – only moving parts in final-stage cross-cut sampler</li><li>Final-stage sampler identical for both AnStat-330 and SamStat-30 across full flow range</li></ul><h3>🧩 Optional Features</h3><ul><li>Pebble screen: Removes oversized particles from cyclone overflow; acts as backup to upstream primary screen</li><li>Outlet distributor: Splits slurry flow into 2+ streams with defined volume ratios</li><li>Upwelling/reverse flow sampling zone: Ideal for particle size analysis (with PSM-500)</li><li>Vacuum filter: For use with composite sampling</li></ul>

Thermo Scientific ARL EQUINOX 100 X-ray Diffractometer

The ARL EQUINOX 100 is a compact benchtop XRD for QC, research, and routine use. It captures full diffraction patterns in real time with a CPS detector — no moving parts or scanning needed.

<h4>Compact, powerful, and flexible benchtop XRD system for routine and advanced applications</h4>The ARL EQUINOX 100 is a compact benchtop X-ray diffractometer (XRD) designed for quality control, academic research, and routine analysis. It features a unique curved position-sensitive (CPS) detector that enables real-time acquisition of the entire diffraction pattern — with no moving parts and no scanning required.<h3>Key Features</h3><ul><li>Real-time acquisition: entire diffraction pattern captured in seconds</li><li>Wide angular range: up to 110° 2θ without moving components</li><li>No external water cooling: no chiller required</li><li>Standard power outlet: plug-and-play with no special electrical setup</li><li>Low-power microfocus X-ray source: high intensity and efficient optics</li><li>Versatile measurement: reflection and transmission modes</li><li>Easy installation: suitable for labs, mobile labs, and field vans</li></ul><h3>Sample Handling &amp; Accessories</h3><ul><li>Fixed non-spinning sample stage</li><li>Spinning stages for powders, bulks, filters, and pressed pellets</li><li>Capillary sample stage for transmission mode</li><li>Controlled atmosphere sample stage</li><li>6-position automatic sample changer</li><li>Dedicated stage for thin film analysis (GIXRD, XRR)</li><li>Temperature-controlled stages (–10 °C to 500 °C)</li></ul><h3>Typical Applications</h3><ul><li>Phase identification and quantification</li><li>Degree of crystallinity, crystallite size, and lattice parameters</li><li>Crystal structure solutions and Rietveld refinement</li><li>Thin film characterization (GIXRD, XRR)</li><li>In-situ and dynamic studies (e.g., phase transitions)</li><li>Fields: materials science, geology, nanomaterials, chemistry, pharmaceuticals, metallurgy, teaching</li></ul><h3>Software &amp; Compliance</h3><ul><li>SolstiX™ XRD Software with 21 CFR Part 11 compliance</li><li>Electronic signatures, audit trails, secured data handling — ideal for pharmaceutical QA/QC environments</li></ul><h3>Why Choose ARL EQUINOX 100?</h3><ul><li>Simultaneous, real-time data acquisition</li><li>Compact, rugged, and mobile-ready design</li><li>High performance at low operating cost</li><li>Flexible platform for a broad range of samples and applications</li></ul>

Thermo Scientific MEP-300 Upgrade Package for MSA and AnStat

Streamline slurry analysis with the Thermo Scientific™ MEP-300 probe—no liquid nitrogen needed. Replaces MEP/MEP-200 and features SDD technology for reliable, high-performance XRF results.

<h4>Enhance XRF Slurry Analysis with the Thermo Scientific™ MEP-300 Multi-Element Probe – No Liquid Nitrogen Required</h4>Streamline elemental analysis of slurries with the Thermo Scientific™ MEP-300 Multi-Element Probe, designed to eliminate the need for liquid nitrogen while improving performance and reliability. Developed as a direct replacement for earlier MEP and MEP-200 immersion probes used in <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2027">AnStat </a>and <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2004">MSA</a> X-ray analyzer systems, the MEP-300 leverages advanced Silicon Drift Detector (SDD) technology for superior results in demanding industrial environments.<h3>Why Choose the MEP-300 Probe?</h3><h4>Advanced SDD Technology</h4><ul><li>Operates without cryogenic cooling</li><li>Delivers lower detection limits and improved analytical accuracy</li><li>Achieves higher count rates, reduced background, and wider field of view</li><li>Demonstrated stability under shock and vibration, ideal for on-line industrial use</li><li>No special storage or handling required</li></ul><h4>Occupational Health &amp; Safety</h4><ul><li>No liquid nitrogen, eliminating associated hazards</li><li>Enhanced radiation safety with:<ul><li>Automatic source retraction on window rupture or probe lift</li><li>Fail-safe, spring-loaded design to withdraw the source on power loss</li><li>High-visibility beacon for status and alarm indication</li></ul></li></ul><h4>Optimized Maintenance &amp; Operations</h4><ul><li>Zero ongoing cost for liquid nitrogen</li><li>Lower cost of spare parts</li><li>Field-repairable detector — no need to return to the factory</li><li>Easy-to-replace modules and cable assemblies</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_MEP_300_Upgrade_Package_for_MSA_and_An_Stat_87564bbe7b.jpg" alt="Thermo Scientific MEP-300 Upgrade Package for MSA and AnStat." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_MEP_300_Upgrade_Package_for_MSA_and_An_Stat_87564bbe7b.jpg 192w," sizes="100vw" width="1374" height="1116"><h3>Specifications</h3><ul><li>Air Requirements:&nbsp;<ul><li>Instrument Air: ANSI ISA-S7 0 0-1996 (clean and dry to 0.1 microns with dew point &lt;2°C)</li><li>Air Pressure: 550 kPa nominal – 1000 kPa maximum</li></ul></li><li>Certifications/Compliance: CE, ICES 001, CSA, FCC Part 15B and RCM AS/NZS CISPR11</li><li>Electrical Requirements:&nbsp;<ul><li>Three Phase 48 to 62 Hz. Max 2.5kVA Neutral not required.</li><li>Identical power requirements to previous generation products.</li><li>Any of the standard three phase voltages used in the world mining industry in the range 380–600 Volts AC may be factory or field selected.</li><li>Variation should not exceed ±10% of the nominal voltage selected.</li></ul></li><li>Operating Temperature:&nbsp;<ul><li>Ambient -10°C to +55°C (measured at enclosure surface temperature, temperature to not exceed 55°C)</li><li>Process Fluid: 0°C to 45°C, Check with factory for higher temperature options</li></ul></li><li>Type: MEP-300 Upgrade Package for MSA and AnStat</li><li>Unit Size: Each</li></ul>

Products focused on X-ray - page 1

Related content

News from LabRulezICPMS Library - Week 31, 2026

Using repeated measurements to improve the standard uncertainty

Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental