This leaflet is intended as a comprehensive checklist outlining the key steps to consider when participating in a proficiency testing (PT) scheme. Selection of an appropriate PT scheme must be ensured [1]. It provides essential tips to help participants avoid common mistakes and achieve successful outcomes. The main stages of PT participation are covered, from receipt of PT items through to the review of received evaluations [1-3]. Documentation of outcomes for many of the topics addressed below is recommended, particularly for accreditation purposes.&nbsp;<h4>1. Prior to PT participation&nbsp;</h4><ul><li>Verify that the PT provider has up-to-date billing, shipping and technical contact information for the laboratory.&nbsp;</li><li>Ensure that the laboratory has documented procedures in place or, if necessary, prepare procedures for: reviewing PT results upon receipt; taking corrective actions when assessments indicate poor performance; conducting periodic reviews of PT results over time; storing PT reports.&nbsp;</li></ul><h4>2. Receipt of PT items&nbsp;</h4><ul><li>Open the package of PT items immediately upon receipt to check their condition. Contact the PT provider and request a replacement if any PT items are missing, broken, leaking or otherwise compromised.&nbsp;</li><li>Study the PT provider’s instructions carefully to ensure they are clear and understandable (e.g. handling, storage, pre-treatment, preparation, reporting of results).&nbsp;</li><li>Register, identify, and mark the PT items according to normal procedures in the laboratory.&nbsp;</li><li>Store the PT items in accordance with any instructions provided.&nbsp;</li></ul><h4>3. Measurements&nbsp;</h4><ul><li>Read the instructions supplied by the PT provider carefully before starting the measurements.&nbsp;</li><li>Carry out the measurements under conditions as close as possible to routine testing, unless otherwise instructed by the PT provider.&nbsp;</li><li>Ensure that the analysis is carried out to meet any measurement deadline requirements.</li></ul><h4>4. Reporting results&nbsp;</h4><ul><li>Allow sufficient time for reporting the results to the PT provider.&nbsp;</li><li>Report all the information required by the PT provider.&nbsp;</li><li>Ensure that the results are reported in the requested format (e.g. units, number of significant figures, decimal places).&nbsp;</li><li>Ensure that the results you are going to submit are those that you intend, correcting for any identified transcription errors (e.g. mix-up of samples or analytes).&nbsp;</li><li>Confirm that the submission process of the results to the PT provider has been completed.&nbsp;</li></ul><h4>5. Reviewing PT reports&nbsp;</h4><ul><li>Read the PT report as soon as possible and check that your results and other information are correctly represented; report any errors immediately to the PT provider.&nbsp;</li><li>Take notice of any comments on the specific PT round, evaluation of performance, and other matters relevant to the results of the PT round which provide valuable context to your individual results.&nbsp;</li><li>Review your assessed performance carefully in accordance with your laboratory procedures.&nbsp;</li><li>Store the PT report according to internal procedures.&nbsp;</li></ul><h4>6. Follow-up on participation in a PT scheme&nbsp;</h4><ul><li>Investigate any poor performance in accordance with your laboratory quality system [4].&nbsp;</li><li>Evaluate the impact of poor performance (e.g. risk that poor quality data may have been reported to customers).&nbsp;</li><li>Implement any corrective actions as relevant, and if possible, make use of any surplus PT items [5] to assess effectiveness.&nbsp;</li><li>Monitor any trends in performance over time, concentration levels, etc.&nbsp;</li></ul><blockquote>Information about PT providers and PT schemes can be obtained from your national accreditation body, from the <a target="_blank" rel="noopener noreferrer" href="https://www.eptis.org/">EPTIS website</a> or from other national or international organizations.</blockquote>

Basic instructions for participants in a proficiency testing scheme

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 9th March 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Metrohm, Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: Spectral Transmission Measurements of Pharmaceutical Packaging</h3>Using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV%E2%80%91Vis">Agilent Cary 60 UV‑Vis</a> Diffuse Reflectance Accessory following EP &lt;3.2.1&gt;, USP &lt;660&gt;, and USP &lt;661.2&gt;<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_pharmaceutical_packaging_transmission_cary_60_uv_vis_dra_5994_8889en_agilent_2c933e5576.pdf">Full PDF for download</a></li></ul>Pharmaceutical containers play a significant role in maintaining final drug stability, integrity, and safety, from manufacturing to distribution to the end user. The ability of the packaging system to protect the drug from external agents is critical for quality assurance. Therefore, all pharmaceutical packaging systems must conform to stringent standards.&nbsp;Plastic and glass are commonly used materials for packaging, and they are typically transparent or opaque. Transparency to ultraviolet (UV) light can pose a risk to light‑sensitive pharmaceuticals, as exposure can initiate adverse—and sometimes harmful—photochemical reactions that can significantly affect drug quality and reduce shelf-life.1&nbsp;The EP and USP define well-established standards, designed to measure physiochemical and functional properties of packaging components intended to contain a drug product (pharmaceutical containers), to meet regulatory requirements. The EP Chapter &lt;3.2.1&gt; Glass Containers for Pharmaceutical Use includes a functionality test method to demonstrate adequate light resistance of colored glass containers through spectral transmission measurement. An included acceptance criterion specifies the allowed maximum amount of light transmitted by the tested material, defined by the drug product dosage administration form. For example, for glass containers that package oral drug products, the acceptance criterion defines that the observed spectral transmission should not exceed 10% at any wavelength in the range of 290 to 450 nm (&lt; 10%T).2 The identical test and criterion are found in USP Chapter &lt;660&gt; Containers – Glass.3 In addition, the USP Chapter &lt;661.2&gt; Plastic Packaging Systems for Pharmaceutical Use also includes the analogous functionality test method and acceptance criterion for plastic pharmaceutical packaging.4&nbsp;The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV%E2%80%91Vis">Cary 60 UV-Vis spectrophotometer</a>, equipped with the Cary 60 UV-Vis DRA, was chosen for measurement due to its extended ability to reliably measure precise transmission of scattering materials (Figure 1). The Cary 60 UV-Vis is a versatile spectrophotometer; however, measuring materials like plastics and glass, which are textured, translucent, or opaque in a manner that scatters light can result in challenges in satisfactorily measuring light transmittance with standard techniques. In a standard spectrophotometer, scattering materials tend to diffuse transmitted light, deviating an unquantifiable amount of light from the direct optical path of the detector. The detector may not collect all the scattered (lost) light, resulting in inaccurate measurements and results.&nbsp;For this reason, the Cary 60 UV-Vis was equipped with an internal DRA, which uses a 50 mm integrating PTFE-coated sphere that easily sits inside the spectrophotometer's sample compartment. For these applications, using a DRA can optimize light collection. The sphere's design captures all scattered light uniformly, overcoming scattering losses for accurate measurement of transmitted light. In applications where total transmission is crucial for quality assurance, the DRA is an essential tool for accurate measurements.<h4>Conclusion&nbsp;</h4>In this application note, an Agilent Cary 60 UV-Vis spectrophotometer, fitted with an Agilent Cary 60 UV‑Vis DRA, was used to reliably and quickly determine the spectral transmission of packaging systems used for pharmaceuticals, following the EP &lt;3.2.1&gt;, USP &lt;660&gt;, and USP &lt;661.2&gt; test methods for functionality of light-resistant packaging systems. The integrating sphere enabled the instrument to accurately measure total transmittance of plastic and glass (scattering) materials.&nbsp;All containers presented less than the defined maximum %T specification, demonstrating light-resistance functionality for containing light-sensitive drug products for oral administration. This method illustrates the importance of accurate testing for quality assurance of pharmaceutical packaging. The Agilent Cary 60 UV-Vis spectrophotometer, paired with Cary WinUV Pharma software, delivers secure data management and compliance for regulated pharmaceutical labs.<h3>2. Metrohm: Multiparameter hops analysis by near-infrared spectroscopy (NIRS)</h3>Rapid determination of alpha acids, beta acids, cohumulone content, total oil content, HSI, and moisture<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nir_130_download_6177b89ee1.pdf">Full PDF for download</a></li></ul>The quality of hops and hop pellets is vital across the entire brewing supply chain. Traditional methods used for quality control (e.g., titration and HPLC) are highly accurate and widely accepted. They are also time consuming, labor intensive, and dependent on chemical reagents which not only incur ongoing material costs but also require careful handling and proper disposal. Near-infrared spectroscopy (NIRS) offers a compelling alternative when ultra-high precision is not necessary. It enables the rapid analysis of multiple parameters within a minute without using any chemicals. This Application Note outlines the measurement setup and the results of cohumulone, hop oils, and moisture content, the hop storage index (HSI), and hops acids analysis with NIRS.<h4>EXPERIMENTAL EQUIPMENT&nbsp;</h4>More than 500 fresh hop samples and ground hop pellets were analyzed on an <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=220&amp;search=omnis+nir">OMNIS NIR Analyzer Solid</a> (Figure 1). The samples were added to an OMNIS sample cup and analyzed in diffuse reflection mode. To include sample variety, the sample rotated during measurement to collect spectra from different locations. The automatically averaged spectra were used for model development. Spectra acquisition, model development, and validation were carried out with the OMNIS Software.&nbsp;Reference values for alpha acids were obtained using various official methods, including EBC 7.4, EBC 7.5, and EBC 7.7. Total oils and beta acid content were determined using EBC 7.4, while EBC 7.7 was employed for cohumulone analysis. Moisture content and the hop storage index (HSI) were measured using a halogen moisture analyzer and a UV-VIS photometer, respectively.<h4>CONCLUSION</h4>This Application Note demonstrates the feasibility of using NIR spectroscopy for the analysis of freshly harvested hops and ground hop pellets to determine cohumulone, moisture, and total oil content, HSI, and alpha and beta acids. Using alpha acids as an example, the difference between a prediction model covering the full concentration range and a model specific to a narrower range was highlighted. The latter reduced the prediction error by a factor of two.&nbsp;Users can apply this approach to maximize accuracy. In the OMNIS Software, both models can be combined to automatically perform the following sequence. First, the alpha acid concentration is estimated using the broad-range model; then, a more precise prediction is made using the restricted-range model.<h3>3. Shimadzu: Observation of Acrylic Block Fracture during Impact Compression Using the Hopkinson Bar Method</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01146_en_dc42e77a9c.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>The HPV -X3 offers three times the resolution of conventional models, enabling observation of specimen fracture at much higher resolution.</li><li>With a maximum frame rate of 20 Mfps, the HPV-X3 is well-suited for observing high-speed phenomena such as an impact test</li></ul>Understanding materials properties is critical to product design. In particular, for applications such as transportation equipment, where materials may be subjected to impact loads, it is essential to evaluate not only static properties but also impact properties. When subjected to impact, materials may exhibit stress and strain characteristics different from those under static loading, making it essential to quantify these characteristics through impact testing.&nbsp;The Hopkinson bar method is a well-established technique for impact compression testing. Proposed by B. Hopkinson, this method enables detailed analysis of a material’s impact response and evaluation of its fracture properties by subjecting the specimen to a sudden force using a bar-launching device. This paper presents an example of an impact compression test on an acrylic specimen with a central circular hole, recorded with an HPV-X3 high-speed video camera (Fig. 2) using the Hopkinson bar method.<h4>Imaging System&nbsp;</h4>The imaging devices are listed in Table 1, and the imaging conditions are listed in Table 2. As shown in Fig. 4(b), laser illumination was directed from the rear of the specimen toward the lens, and imaging was performed with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X3">HPV-X3</a> using a close-up ring, bellows, and macro lens. This setup enabled observation of the fracture process in the acrylic block. Two types of imaging were conducted: observation of crack propagation immediately after loading, and observation of subsequent fracture.<h4>Conclusion&nbsp;</h4>The impact compression test of an acrylic specimen using the Hopkinson bar method was observed using the HPV-X3 highspeed video camera. Inside the compressed specimen, the propagation of a wavefront believed to be a stress wave was first observed. Subsequently, cracks propagated from the central circular hole toward the left and right surfaces, and finally, diagonal cracks formed, leading to complete fracture. The progress of this series of fracture processes was clearly captured.&nbsp;The HPV-X3 has three times the resolution of the previous <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X2">HPVX2 model</a>, enabling more detailed observation of specimens during impact tests, including the Hopkinson bar method. Furthermore, because fracture phenomena during impact testing occur at high speeds, the HPV-X3, which can record images at up to 20 Mfps, is ideal for capturing them.<h3>4. Thermo Fisher Scientific: Analysis of silica in air filters using ARL X’TRA Companion X-ray Diffractometer</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/analysis_of_silica_in_air_an41521_a3b8eb33d5.pdf">Full PDF for download</a></li></ul>The analysis of silica in air filters is a critical aspect of occupational health and safety, aimed at protecting workers from the harmful effects of inhaling crystalline silica particles, which can lead to diseases such as silicosis and lung cancer. The NIOSH 7500 method (NIOSH, 2003) provides a detailed and standardized procedure for the determination of crystalline silica in air samples using X-ray diffraction (XRD). This method involves the collection of air samples on filters, which are then analyzed to identify and quantify the crystalline silica phases, including quartz, cristobalite, and tridymite.&nbsp;XRD is chosen for its high specificity and sensitivity in distinguishing different crystalline forms of silica, making it a reliable analytical technique. The method outlined in NIOSH 7500 requires meticulous sample preparation, including the proper collection and handling of air filters, calibration with known standards, and strict adherence to analytical parameters to ensure accurate and reproducible results. Following the NIOSH 7500 norm and equivalent standards helps ensure the reliable monitoring of workplace air quality, thereby safeguarding workers’ health. The use of XRD in analyzing silica in air filters is an essential component of industrial hygiene and environmental monitoring programs, facilitating the detection and control of hazardous silica exposure in occupational settings.<h4>Instrument and software&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2296">Thermo Scientific™ ARL™ X’TRA Companion X-ray Diffractometer</a> (c.f. Figure 1) is a simple, easy-to-use benchtop XRD instrument for routine phase analysis as well as more advanced applications. The ARL X’TRA Companion XRD uses a θ/θ goniometer (160 mm radius) in Bragg-Brentano geometry coupled with a 600 W X-ray source (Cu or Co). The radial and axial collimation of the beam is controlled by divergence and Soller slits, while air scattering is reduced by a variable beam knife. An integrated water chiller is available on demand. Thanks to the innovative solid state pixel detector (55 x 55 μm pitch), the ARL X’TRA Companion XRD provides very fast data collection and comes with one-click Rietveld quantification capabilities and automated result transmission to a LIMS (laboratory information management system).<h4>Your benefits&nbsp;</h4>The ARL X’TRA Companion XRD provides data perfectly suited to quantify respirable quartz in air filters. Utilizing a calibration curve in a one-click refinement delivers results within minutes, ensuring ease-of-use for operators and reducing training requirements. XRD analysis of air filter samples complies with the NIOSH 7500 standard.

News from LabRulezICPMS Library - Week 11, 2026

How can we make the production of supercapacitors for energy storage more sustainable and replace the traditionally used but toxic solvent NMP (N-methyl-2-pyrrolidone)? According to scientists from CATRIN at Palacký University, the “green” solvents Cyrene and Tamisolve may be a suitable alternative. In an article published in the <a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S1385894725130696?via%3Dihub#s0060">Chemical Engineering Journal</a>, they have shown that these solvents can be used in production without reducing the performance of the equipment. They thus offer a path to the next generation of sustainable, high-performance supercapacitors for industrial use.“Supercapacitors are one of the modern technologies for storing electric energy. As sustainable energy storage becomes more prominent, it is essential to replace the hazardous solvents used in the production of supercapacitor electrodes. Our study presents Cyrene and Tamisolve as environmentally friendly alternatives to the toxic solvent NMP, which is traditionally used in production. Both tested solvents enabled the preparation of electrodes that maintain high electrochemical performance while improving environmental compatibility,” said Michal Otyepka, corresponding author of the article.The electrodes were prepared using nitrogen-doped graphene as the active material in combination with two types of binders. The first was a common fluorinated binder (PVDF), which is widely used in industry, including in the manufacturing of battery electrodes. The researchers also tested a fluorine-free binder (PVP), which has a lower environmental impact and is more soluble in environmentally friendly solvents. Using various combinations, they monitored the performance and stability of the electrodes as well as their mechanical resistance.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/CATRIN_Vedci_z_CATRIN_nabizeji_zelenejsi_cestu_pro_vyrobu_superkondenzatoru_443775296a.jpg" alt="CATRIN: CATRIN researchers offer a “greener” way to make supercapacitors" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_CATRIN_Vedci_z_CATRIN_nabizeji_zelenejsi_cestu_pro_vyrobu_superkondenzatoru_443775296a.jpg 245w," sizes="100vw" width="1536" height="768">“The results showed that not only can the alternative solvents Cyrene and Tamisolve fully replace the toxic solvent NMP, but also that the prepared electrodes have the necessary mechanical properties. Their compatibility with both fluorinated PVDF and non-fluorinated PVP binders, together with excellent layer uniformity and electrochemical stability, makes them ideal for use in scalable applications. This is essential for industrial production,” said the publication’s first author, Ivan Dědek.Cyrene, or dihydrolevoglucosenone, is obtained from renewable biomass sources such as cellulose. Tamisolve (N-butyl-2-pyrrolidone) is a substance related to the commonly used NMP, but is more gentle on human health and the environment.Supercapacitor research has been a priority at CATRIN for almost ten years. In addition to developing new active materials, such as the successful nitrogen-doped graphene (SC-GN3), it also focuses on environmentally friendly and industrially feasible manufacturing processes. The replacement of toxic NMP with the “greener” solvents Cyrene and Tamisolve confirms that more sustainable production can go hand in hand with high performance and represents an important step towards industrial implementation.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S1385894725130696?via%3Dihub#s0060">Toward transitioning to green and sustainable supercapacitors</a></h4>Ivan Dědek, Vojtěch Kupka, Veronika Šedajová, Petr Jakubec, Matěj Navrátil, Michal Otyepka&nbsp;Chemical Engineering Journal, 529, 2026, 172220<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.cej.2025.172220">https://doi.org/10.1016/j.cej.2025.172220</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>The rapid advancement of supercapacitor technologies has intensified the demand for sustainable electrode fabrication methods that minimize environmental impact. A major challenge arises from the extensive use of the toxic solvent N-methyl-2-pyrrolidone (NMP), which is subject to increasingly stringent regulatory restrictions. We demonstrate that NMP can be effectively replaced with two green solvents, dihydrolevoglucosenone (Cyrene) and N-butyl-2-pyrrolidone (Tamisolve), without compromising electrochemical performance. Electrode formulations were prepared using nitrogen-doped graphene as the active material, in combination with either polyvinylidene fluoride (PVDF), a widely employed fluorinated binder, or polyvinylpyrrolidone (PVP), a non-fluorinated alternative with improved environmental profile. Optimized coatings exhibited high mass loadings exceeding 6 mg cm−2 while maintaining strong adhesion to current collectors, an often overlooked yet critical parameter for scalable manufacturing. Electrochemical testing revealed that PVDF in Cyrene delivered an energy density of 66.6 Wh kg−1 at a power density of 1.85 kW kg−1, with excellent cycling stability, retaining 91 % of capacitance after 100,000 cycles. PVP in Cyrene provided a more environmentally benign alternative, achieving an energy density of 64.2 Wh kg−1 at 1.80 kW kg−1, with 78 % capacitance retention after 100,000 cycles, thereby highlighting the trade-off between performance and sustainability.

CATRIN researchers offer a “greener” way to make supercapacitors

Article

Application

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

The Czech Advanced Technology and Research Institute (CATRIN) at Palacký University is a cutting-edge scientific hub dedicated to advancing research in the fields of nanotechnology, biotechnology, and biomedicine. At its core, CATRIN boasts outstanding scientific teams, featuring international researchers. We emphasize interdisciplinarity, foster global collaborations, and work to translate our research findings into practical applications.

CATRIN

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Thermo Scientific MarqMetrix All-In-One X Process Raman Analyzer

Compact, portable Thermo Scientific MarqMetrix All-In-One X Process Raman analyzer for real-time, intrinsically safe process analysis in hazardous locations, enabling fast, non-destructive measurement of gases, liquids, and solids.

The Thermo Scientific MarqMetrix All-In-One X Process Raman Analyzer is a compact, portable Raman spectrometer engineered for real-time compositional analysis in hazardous locations. Designed for ease of use and rapid deployment, it delivers inherently and intrinsically safe operation where fast, confident decision-making is critical.<h4>Designed for hazardous environments</h4>Purpose-built for hazardous locations, the analyzer provides intrinsically safe optical power and on-site, real-time compositional insights. This enables operators to make faster, safer, and more informed decisions directly at the point of measurement.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_2_f4280a5f55.jpg" alt="Thermo Scientific MarqMetrix All-In-One X Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_2_f4280a5f55.jpg 229w," sizes="100vw" width="650" height="442"><h4>Applications</h4>The analyzer is ideal for industries requiring fast and accurate results, including:<ul><li>Midstream and downstream oil &amp; gas operations</li><li>Chemical and polymer processing</li><li>Pharmaceutical development and manufacturing</li></ul><h4>Designed for use in hazardous locations</h4>The MarqMetrix All-In-One X Process Raman Analyzer supports probes engineered for safe operation in hazardous environments and compliant with ATEX Zone 0, IECEx, and Class I Division 1 certifications. These probes enable real-time analysis of gases, liquids, and solids using a single analyzer.Available probe options include:<ul><li>Thermo Scientific MarqMetrix FlowCell Sampling Optic Designed for seamless integration into continuous flow processes, this optic enables highly accurate Raman measurements without proprietary hardware. It connects easily to existing flow paths using standard industry fittings.</li><li>Thermo Scientific MarqMetrix Process BallProbe Sampling Optic Engineered for extreme environments, this probe is constructed from Hastelloy® C-276 for exceptional durability in harsh chemical and high-temperature conditions. Available in multiple diameters and chassis lengths, it delivers reliable in-line measurements for demanding applications.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_5_46cbbadfe8.jpg" alt="Thermo Scientific MarqMetrix All-In-One X Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_5_46cbbadfe8.jpg 245w," sizes="100vw" width="650" height="327"><h4>Simple, non-destructive analysis</h4>The analyzer streamlines process analysis by eliminating the need for sample preparation and enabling fast, non-destructive, and non-invasive measurements. Its intuitive design allows straightforward setup and operation, even for users without prior spectroscopy experience. Factory calibration ensures consistent, high-precision measurements from the start, supporting scalable deployment across multiple instruments.<h4>Software and connectivity</h4>The system includes a comprehensive Raman software suite for spectral acquisition, visualization, chemometric model application, and real-time trend analysis. A dedicated integration software package supports seamless connectivity with industrial and process control systems via the Modbus communication protocol.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_4_bc7cefcb24.jpg" alt="Thermo Scientific MarqMetrix All-In-One X Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_4_bc7cefcb24.jpg 245w," sizes="100vw" width="650" height="413"><h4>Specifications</h4><ul><li>Certifications / Compliance: Laser Certification: Class 3B laser device, reported to the FDA</li><li>Dark Noise: ≤16.5 counts at 10 s integration</li><li>Depth (Metric): 25 cm</li><li>Detector: Thermally stabilized CCD (2-stage TEC)</li><li>Fiber Conditions: FC/PC (both excitation and collection)</li><li>Height (Metric): 11.4 cm</li><li>Includes: Wireless mouse, HDMI cable, and monitor</li><li>Laser Power:<ul><li>Laser excitation wavelength: 785 nm</li><li>Excitation power: 35 mW (maximum allowable laser energy in ATEX Zone 0 environments)</li></ul></li><li>Operating Temperature Range: 15 °C to 30 °C</li><li>Resolution: 6.5 cm⁻¹ average across spectral range</li><li>Safety Features:&nbsp;<ul><li>1 keyed laser interlock switch</li><li>electronic laser trigger</li></ul></li><li>Software Details: MarqMetrix All-In-One Process Raman Analyzer Raman suite</li><li>Spectral Range: 100 to 3250 cm⁻¹</li><li>Width (Metric): 25 cm</li><li>Type: Raman spectrometer</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_3_57b8fa48b9.jpg" alt="Thermo Scientific MarqMetrix All-In-One X Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_X_Process_Raman_Analyzer_3_57b8fa48b9.jpg 243w," sizes="100vw" width="650" height="418">

Thermo Scientific MarqMetrix All-In-One Process Raman Analyzer

Thermo Scientific MarqMetrix All-In-One Process Raman Analyzer enables real-time, non-destructive inline process monitoring without sample preparation, even for non-expert users.

Thermo Scientific™ MarqMetrix™ All-In-One Process Raman Analyzer is a compact, easy-to-deploy Raman spectroscopy system designed for real-time, non-destructive process monitoring without the need for sample preparation. It delivers fast, accurate Raman spectral data directly at the point of need, enabling confident decision-making in both development and production environments.<h3>Real-time process insight—made simple</h3>The MarqMetrix All-In-One Process Raman Analyzer is engineered for reliability and ease of use. Factory calibration ensures consistent performance and portability, while one-button hardware and intuitive software allow even non-Raman specialists to obtain high-quality measurements within minutes. The small footprint supports flexible, in-line or at-line deployment across diverse processes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_Process_Raman_Analyzer_5_c64e0799ee.jpg" alt="Thermo Scientific MarqMetrix All-In-One Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_Process_Raman_Analyzer_5_c64e0799ee.jpg 245w," sizes="100vw" width="650" height="249"><h3>Key benefits</h3><ul><li>No sample preparation for immediate, real-time Raman results</li><li>Non-destructive and non-invasive analysis to protect valuable samples and minimize contamination</li><li>Rapid setup and operation, usable by non-experts</li><li>Compact, portable design for convenient deployment</li><li>Factory-calibrated hardware for stability and consistency</li><li>cGMP &amp; 21 CFR Part 11–ready software available for regulated environments</li></ul><h3>Application versatility</h3><ul><li>Bioproduction</li><li>Oil &amp; gas processing (e.g., refined fuels, carbon capture)</li><li>Industrial fermentation, including cultivated meat production</li><li>Polymers</li></ul><h3>Inline Raman for faster optimization</h3>Designed for continuous monitoring, the MarqMetrix system enables in-line Raman measurements that help optimize processes faster and reduce reliance on off-line testing. Its robust construction and factory calibration support continuous, precise analysis right out of the box—even when transported to the point of need.<h3>Flexible probe options</h3>A range of probes is available to match specific application requirements, including:<ul><li>MarqMetrix™ BallProbe™ Sampling Optic</li><li>Single-Use Bioreactor BallProbe™ Sampling Optic</li><li>Performance BallProbe™ Sampling Optic</li><li>Process BallProbe™ Sampling Optic</li><li>Custom BallProbe™ Sampling Optic</li><li>Fiber BallProbe™</li></ul><h3>Powerful, intuitive software</h3>Expand system capabilities with Thermo Scientific™ Lykos™ PAT Software, designed to simplify chemometrics and remote operation:<ul><li>Real-time visualization, storage, and export of process data</li><li>Remote control and monitoring from outside the lab</li><li>Intuitive workflows for non-Raman users</li><li>Centralized control of multiple MarqMetrix analyzers</li><li>Optional add-ons for cGMP &amp; 21 CFR Part 11 compliance</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_Process_Raman_Analyzer_4_dbff4ebc13.jpg" alt="Thermo Scientific MarqMetrix All-In-One Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_Process_Raman_Analyzer_4_dbff4ebc13.jpg 235w," sizes="100vw" width="650" height="432"><h3>Service and support</h3>Comprehensive service plans from Thermo Fisher Scientific help maximize uptime and performance throughout the instrument lifecycle, including:<ul><li>Unlimited technical support</li><li>Depot repair services</li><li>Compliance maintenance</li><li>Expert consulting services</li></ul>The MarqMetrix All-In-One Process Raman Analyzer provides a practical, reliable path to real-time Raman process analytics—combining speed, simplicity, and regulatory readiness in a single, portable platform.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Marq_Metrix_All_In_One_Process_Raman_Analyzer_3_1b15997c49.jpg" alt="Thermo Scientific MarqMetrix All-In-One Process Raman Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Marq_Metrix_All_In_One_Process_Raman_Analyzer_3_1b15997c49.jpg 104w," sizes="100vw" width="433" height="650"><h3>Specifications</h3><ul><li>Certifications/Compliance: Laser Certification: Class 3B laser deviceReported to the FDA</li><li>Dark Noise: ≤16.5 counts at 10 sec. integration</li><li>Depth (Metric): 25 cm</li><li>Detector: Thermally stabilized CCD (2 stage TEC)</li><li>Electrical Requirements: Hertz: 50/60 Hz</li><li>Fiber Conditions: FC/PC (Both excitation and collection)</li><li>Height (Metric): 7.7 cm</li><li>Includes: Wireless mouse, HDMI cable, monitor</li><li>Laser Power: Laser Excitation Wavelength: 785 nm, Excitation power: 10 to 450 mW</li><li>Operating Temperature Range: 15°C to 33°C</li><li>Ports: 1RJ-45 Ethernet port 3 USB 3.0</li><li>Resolution: Spectral Resolution: 6.5 cm-1 average across spectral range</li><li>Safety Features: 1 keyed Laser interlock switch, Electronic laser trigger</li><li>Software Details: MarqMetrix Raman suite Controller: Integrated PC (Windows 10 OS)</li><li>Spectral Range: 100 to 3250 cm-1</li><li>Width (Metric): 25 cm</li><li>Unit Size: Each</li></ul>

Thermo Scientific iXR Raman Spectrometer

The Thermo Scientific™ iXR Raman Spectrometer is a research-grade Raman system for multi-modal and in-situ analysis, enabling correlation of chemical and physical material properties in real time.

The Thermo Scientific™ iXR Raman Spectrometer is a research-grade Raman system specifically designed for integration into multi-modal analytical platforms and in-situ measurements alongside complementary physical and chemical techniques. It enables simultaneous acquisition of molecular-level chemical information and physical property data from the same location and under identical conditions.Delivering performance comparable to laboratory research Raman spectrometers, the iXR is ideally suited for advanced materials research, product development, and manufacturing environments. Its open optical architecture and free-space optical coupling allow seamless integration with rheometers, extrusion systems, processing equipment, and surface analysis tools such as XPS.Raman spectroscopy with the iXR provides insight into chemical composition, matrix morphology, phase transitions, and crystallinity, with exceptional sensitivity to carbon nanomaterials including graphene and carbon nanotubes.<h3>Key Features</h3><ul><li>True multi-modal Raman analysis at the same point and time</li><li>Research-grade performance for advanced materials science</li><li>Exchangeable lasers, filters, and gratings</li><li>Free-space optical coupling for maximum throughput</li><li>Fully automatic alignment and calibration</li><li>Open architecture for custom instrument integration</li><li>Shared components, software, and data compatibility with the DXR Raman platform</li></ul><h3>Typical Applications</h3><ul><li>Materials science and engineering</li><li>Polymers, pharmaceuticals, personal care products</li><li>Phase transition and crystallinity studies</li><li>In-situ and process Raman analysis</li><li>Correlation of chemical and physical material properties</li></ul><h3>Specifications</h3><ul><li>Depth (Metric): 44 cm</li><li>Electrical Requirements: 100/240 V, 47/63 Hz</li><li>Electronic Records and Signatures: CE, UL/CSA/ETL, 21 CRF1040.10</li><li>For Use With (Application):&nbsp;<ul><li>Nanotechnology</li><li>Material science</li><li>Academic research</li><li>Pharmaceutical</li><li>Geology</li><li>Life Science/Bio-materials</li><li>Polymer</li><li>Automotive/Aero</li><li>Cosmetics</li></ul></li><li>Height (Metric): 37 cm</li><li>Laser Power: Absolute excitation laser power at the sample controlled by OMNIC software</li><li>Model: iXR</li><li>Operating Temperature Range: 16°C to 27°C</li><li>Resolution:&nbsp;<ul><li>Full range grating: average 2 cm⁻¹/CCD pixel element</li><li>High resolution grating: average 1 cm⁻¹/CCD pixel element</li></ul></li><li>Software Details: Thermo Scientific OMNIC software suite</li><li>Weight (Metric): 25 kg</li><li>Width (Metric): 29 cm</li><li>Type: Spectrometer</li><li>Unit Size: Each</li></ul>

Thermo Scientific DXR3 SmartRaman Spectrometer

Highly automated macro-sampling Raman spectrometer for routine QC and research. Push-button operation, multiple lasers, minimal sample prep, fast and reproducible results.

Thermo Scientific DXR3 SmartRaman Spectrometer is a highly automated, push-button operated Raman spectrometer designed for routine laboratory analysis. As a dedicated macro-sampling Raman system, it brings the power of Raman spectroscopy to multi-purpose analytical laboratories that require reproducible, accurate results from a reliable, low-maintenance instrument. With minimal sample preparation and fully automated workflows, the DXR3 SmartRaman is well suited for both research and quality control environments.<h3>Key Capabilities</h3><ul><li>Direct measurement through containers: analyze samples directly through glass bottles, jars, and vials (clear or colored), as well as through plastic bags.</li><li>Representative sampling of heterogeneous materials: expandable measurement spot size up to 5 × 5 mm.</li><li>High-throughput automation: accessories support automated measurements of well plates, tablet arrays, tubes, and vials.</li><li>Specialized sample cells: support high- and low-temperature measurements as well as electrochemical experiments.</li><li>Remote sampling: optional fiber-optic probes for samples too large to fit in the sample compartment.</li><li>Advanced software tools: automate analysis workflows and transform spectral data into actionable results.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Smart_Raman_Spectrometer_5a1544f551.jpg" alt="Thermo Scientific DXR3 SmartRaman Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Smart_Raman_Spectrometer_5a1544f551.jpg 156w," sizes="100vw" width="650" height="650"><h3>High Performance</h3><ul><li>Full spectral range from 3500 to 50 cm⁻¹ captured in a single CCD exposure, eliminating stitching artifacts.</li><li>User-adjustable measurement area from 10 µm to 5 mm using Variable Dynamic Point Sampling (VDPS).</li><li>Four excitation wavelengths (455, 532, 633, and 785 nm) that can be changed in less than one minute.</li><li>Automatic fluorescence correction available for all excitation lasers.</li><li>Automatic intensity correction ensures spectra are comparable across instruments and excitation wavelengths.</li><li>Multidimensional wavelength calibration provides accurate calibration across the entire spectral range.</li><li>Patented triple spectrograph delivers excellent peak shape and maintains focus at all wavelengths.</li><li>Patented algorithms for automated cosmic ray rejection and high-quality laser line filters ensure artifact-free spectra.</li><li>Depolarized lasers minimize sample orientation effects.</li><li>Laser Power Regulator continuously monitors laser power and ensures reproducible excitation over the lifetime of the laser.</li><li>Optimized gratings for each laser avoid compromises associated with shared-grating systems.</li><li>Patented autoalignment keeps the system performing in like-new condition.</li><li>Smart-backgrounds technology automatically removes the CCD dark energy profile.</li></ul><h3>Software and Spectral Databases</h3><ul><li>Extensive spectral libraries with more than 16,000 compounds.</li><li>Library search algorithms optimized specifically for Raman data.</li><li>Specta™ search software enables identification of multiple components in a single measurement.</li><li>Macro-building tools allow repetitive actions to be executed with a single button.</li><li>OMNIC™ Array supports automated data collection and analysis for array-based formats such as well plates and tablet arrays.</li><li>Automatic audit trails record all acquisition parameters and processing steps with each spectrum.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Smart_Raman_Spectrometer_3_abb5bee696.jpg" alt="Thermo Scientific DXR3 SmartRaman Spectrometer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Smart_Raman_Spectrometer_3_abb5bee696.jpg 216w," sizes="100vw" width="650" height="471"><h3>Ease of Use</h3><ul><li>Patent-pending Autoexposure removes guesswork from optimizing exposure time and number of exposures.</li><li>Autofocusing accessories enable effortless switching between different sample types.</li><li>GO-button operation allows walk-up use: place the sample, press a button, and receive a report without interacting with a computer.</li><li>Fully automated alignment and calibration performed by the software—no user decisions required.</li><li>Smart accessories recognition automatically optimizes parameters and alignment when components are changed.</li></ul><h3>Reliability, Maintenance, and Modularity</h3><ul><li>Routine automatic alignment fully controlled by software.</li><li>Automated calibration procedures with software-driven decision making.</li><li>Automatic laser usage tracking for each installed laser.</li><li>Modular design enables flexible purchasing and future expansion without service calls or penalties.</li><li>User-replaceable lasers with SmartLock™ technology ensure reproducible results via automatic alignment and calibration routines.</li><li>Shared components (lasers, gratings, filters, accessories) can be used across multiple instruments; the system stores alignment and calibration parameters for each unique component and applies them automatically upon installation.</li></ul><h3>Laser Safety and Validation</h3><ul><li>Independently certified Class 1 laser safety for the spectrometer. (Note: optional fiber-optic probes and certain accessories are Class IIIB laser devices and require appropriate laser safety precautions and eyewear.)</li><li>Complete DQ/IQ/OQ/PQ validation package available, including extensive documentation and automated software protocols.</li><li>OMNIC™ D/S software supports 21 CFR Part 11 compliance.</li></ul><h3>Recommended Applications</h3><ul><li>Forensics: illicit drug identification, high-throughput automated measurements, and infrared ID backup for court proceedings.</li><li>Pharmaceutical analysis: differentiation of polymorphs and salt forms, tablet characterization.</li><li>Gemology: rapid identification of colored gemstones and discrimination between natural and synthetic diamonds.</li><li>Nanotechnology: bulk nanotube characterization and quality control.</li><li>Academic research: materials science, biological studies, and a wide range of applied research fields.</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Smart_Raman_Spectrometer_4_97223d9902.jpg" alt="Thermo Scientific DXR3 SmartRaman Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Smart_Raman_Spectrometer_4_97223d9902.jpg 156w," sizes="100vw" width="650" height="650"><h3>Specifications</h3><ul><li>Depth (Metric): 69 cm</li><li>Description: DXR3 SmartRaman Spectrometer</li><li>Height (Metric): 46 cm</li><li>Laser Power:&nbsp;<ul><li>Fine Laser Power: Control Power controlled and reported at samples in 0.1 mW increments</li><li>Excitation Lasers: 455 nm, 532 nm, 633 nm, 785 nm</li></ul></li><li>Model: DXR3</li><li>Operating Temperature Range: 16°C to 32 °C</li><li>Optional Accessories:&nbsp;<ul><li>Universal Platform Sampling Accessory</li><li>Carousel Autosampler Sampling Accessory</li><li>180 Degree Sampling Accessory</li></ul></li><li>Resolution:&nbsp;<ul><li>Full-Range Grating: 5.0 cm⁻¹</li><li>High-Resolution Grating: 2.0 cm⁻¹</li></ul></li><li>Software Details: OMNIC Software Suite</li><li>Spectral Range: 3500 to 50 cm⁻¹</li><li>Wavelength Range:&nbsp;<ul><li>Full-Range Grating: 3500 to 50 cm⁻¹</li><li>High-Resolution Grating: 1800-50 cm⁻¹</li></ul></li><li>Weight (Metric): 56.7 kg</li><li>Width (Metric): 97 cm</li><li>Type: Spectrometer</li><li>Unit Size: Each</li></ul>

Thermo Scientific DXR3xi Raman Imaging Microscope

High-performance Raman imaging microscope offering fast, non-destructive 2D and 3D chemical imaging with intuitive workflows, automated calibration, and advanced data visualization.

The Thermo Scientific™ DXR3xi Raman Imaging Microscope delivers research-grade Raman imaging faster than ever before. Enhanced software features combined with higher spatial resolution allow users to instantly obtain detailed visual and chemical information. Advanced imaging capabilities, minimal sample preparation, and intuitive software provide researchers with the power of Raman spectroscopy at the speed modern research demands.<h3>Key features and benefits</h3><ul><li>Simple operation suitable for users of all skill levels</li><li>Faster data visualization enabled by advanced imaging software<ul><li>Advanced particle analysis for rapid identification and analysis of microscopic contaminants</li><li>3D confocal imaging for non-destructive, non-invasive three-dimensional chemical and molecular investigations</li><li>Terrain Mapping to characterize uneven sample surfaces and easily acquire in-focus Raman images</li></ul></li><li>Intuitive workflow designed for demanding applications to maximize sample throughput</li><li>Automated calibration to improve efficiency</li><li>High measurement accuracy supported by:<ul><li>Automatic alignment and calibration with no tools required</li><li>Automatic background compensation</li></ul></li><li>Rapid system reconfiguration within seconds – pre-aligned lasers, filters, and gratings can be changed without tools</li><li>Fast spectral analysis and interpretation using powerful Thermo Scientific™ OMNIC™xi Software</li><li>Advanced autofocus and morphological analysis to track positions across uneven surfaces</li><li>Visualization tools for extracting chemical contrast and identifying and ranking features of interest</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_8_9021ee32c0.jpg" alt="Thermo Scientific DXR3xi Raman Imaging Microscope " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_8_9021ee32c0.jpg 234w," sizes="100vw" width="650" height="433"><h3>Laser safety</h3><ul><li>Microscope designed and independently certified as Class 1 laser safe</li><li>Optional fiber optic accessories and selected components are Class 3b laser devices, requiring appropriate laser safety measures and protective eyewear</li><li>Laser path is physically blocked from the visual viewing path to prevent eye exposure during observation</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_4_73e61c6ef9.jpg" alt="Thermo Scientific DXR3xi Raman Imaging Microscope " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_4_73e61c6ef9.jpg 236w," sizes="100vw" width="650" height="430"><h3>Applications</h3><ul><li>Nanotechnology</li><li>Microplastics analysis</li><li>Polymer and chemical analysis</li><li>Electronics</li><li>Materials science</li><li>Academic research</li><li>Pharmaceutical research</li><li>Geology</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_9_5d3708416c.jpg" alt="Thermo Scientific DXR3xi Raman Imaging Microscope " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_9_5d3708416c.jpg 156w," sizes="100vw" width="650" height="650"><h3>Specifications</h3><ul><li>Electrical Requirements: 100/240 V, 47/63 Hz</li><li>Electronic Records and Signatures: 21CFR Part 11</li><li>For Use With (Application): Nanotechnology, Material science, Academic research, Pharmaceutical, Geology, Microplastics, Polymer/Chemical and Electronics</li><li>Laser Power: Fine Laser Power Control: Power controlled and reported at samples in 0.1 mW increments</li><li>Model: DXR3xi Raman Imaging Microscope</li><li>Operating Temperature Range: 16°C to 27°C</li><li>Resolution: Spatial: 0.5 µm; Confocal Depth: 2 µm</li><li>Software Details: Data analysis and spectral interpretation with powerful Thermo Scientific™ OMNIC™xi Software</li><li>Wavelength Range: 455 nm; 532 nm high brightness; 532 nm high power; 633 nm high brightness; 633 nm high power; 780 nm</li><li>Type: Raman Imaging Microscope</li><li>Unit Size: Each</li></ul>

Thermo Scientific DXR3 Flex Raman Spectrometer

Thermo Scientific™ DXR3 Flex is a research-grade Raman spectrometer designed for flexible integration with other analytical techniques, enabling combined and process Raman measurements without compromising data quality.

The Thermo Scientific™ DXR3 Flex Raman Spectrometer is a research-grade Raman spectrometer specifically designed for seamless integration with other analytical techniques. This compact system is built on the same advanced optical design and architecture as the DXR3 Raman Spectrometer research platform, delivering high-quality Raman data while enabling flexible hyphenation and portability without compromising analytical performance.Often described as a “Raman engine,” the DXR3 Flex features an open architecture that allows custom coupling to almost any type of equipment, in virtually any orientation. By combining Raman spectroscopy with complementary techniques in a single experimental setup, users can eliminate multiple measurements and assumptions, obtaining more complete answers faster.With DXR3 Flex, a single measurement can provide insight into a sample’s physical, chemical, and structural characteristics, all acquired simultaneously and under identical conditions. The system is well suited for advanced materials characterization, chemical identification, process monitoring, and real-time analysis in both research and applied environments.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Flex_Raman_Spectrometer_3_07d0741fcc.jpg" alt="Thermo Scientific DXR3 Flex Raman Spectrometer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Flex_Raman_Spectrometer_3_07d0741fcc.jpg 201w," sizes="100vw" width="650" height="505"><h3>Key features</h3><ul><li>Open architecture enabling custom integration with a wide range of analytical and process equipment</li><li>Hyphenated measurements that combine data from multiple techniques in one experiment</li><li>Research-laboratory-level spectroscopic performance</li><li>Configurable excitation laser wavelengths and spectral resolution to optimize performance for specific materials</li><li>Free-space optical coupling to eliminate fiber-optic losses and maximize sensitivity</li><li>Broad range of available accessories, including fiber-optic coupling, macro and micro sample holders, objectives, cameras, and more</li><li>Lasers are shareable and interchangeable with Thermo Scientific™ DXR3 Raman Microscopes</li><li>Full compatibility with Thermo Scientific™ OMNIC™ Software, data formats, and spectral libraries; OMNIC D/S Software supports CFR 21 Part 11 compliance</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Flex_Raman_Spectrometer_2_b22261d395.jpg" alt="Thermo Scientific DXR3 Flex Raman Spectrometer " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Flex_Raman_Spectrometer_2_b22261d395.jpg 201w," sizes="100vw" width="650" height="505"><h3>Coupling options</h3><ul><li>Rheology systems</li><li>Hot-melt extrusion equipment</li><li>Laboratory-scale and manufacturing-scale processing equipment</li><li>Various microscopic stages and sample holders</li><li>Fiber-optic-based systems with optical input for laser delivery and output for Raman signal collection</li></ul><h3>Typical applications</h3><ul><li>Process and bioprocess monitoring</li><li>Nanotechnology</li><li>Materials science research</li><li>Academic research</li><li>Pharmaceutical analysis</li><li>Geology</li><li>Life science and biomaterials</li><li>Polymer research</li><li>Automotive and aerospace applications</li><li>Cosmetics</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_9_5d3708416c.jpg" alt="Thermo Scientific DXR3 Flex Raman Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_9_5d3708416c.jpg 156w," sizes="100vw" width="650" height="650"><h3>Specifications</h3><ul><li>Electrical Requirements: 100 to 240 VAC, 47 to 63 Hz</li><li>Height (Metric): 37 cm</li><li>Laser Power: Absolute excitation laser power at the sample controlled by OMNIC software</li><li>Model: Flex</li><li>Operating Temperature Range:<ul><li>Minimum temperature: 16°C</li><li>Maximum temperature: 27°C</li></ul></li><li>Resolution:<ul><li>Full range grating: average 2 cm-1/CCD pixel element</li><li>High resolution grating: average 1 cm-1/CCD pixel element</li></ul></li><li>Software Details: Thermo Scientific OMNIC software suite</li><li>Weight (Metric): 25 kg</li><li>Width (Metric): 29 cm</li><li>Type: Spectrometer</li><li>Unit Size: Each</li></ul>The DXR3 Flex Raman Spectrometer is an ideal solution for laboratories that require maximum flexibility, robust performance, and straightforward integration of Raman spectroscopy into complex analytical workflows, backed by the expertise of Thermo Fisher Scientific.

Thermo Scientific DXR3 Raman Microscope

The Thermo Scientific DXR3 Raman Microscope is an easy-to-use confocal Raman system with automated calibration, high stability, and flexible laser options for a wide range of applications.

The Thermo Scientific™ DXR3 Raman Microscope is a modern, easy-to-use point-and-shoot Raman microscope designed to provide faster, more reliable access to Raman data than ever before. Advanced imaging capabilities combined with automated system calibration deliver exceptional stability, reproducibility, and confidence in Raman measurements—even for non-specialist users.Thanks to Automated X-axis Calibration, the DXR3 system maintains long-term accuracy and reliability while minimizing user intervention. With a flexible choice of lasers and gratings, the DXR3 Raman Microscope is ideally suited for applications across pharmaceutical research, academia, advanced polymers, microplastics, and many other demanding fields.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Raman_Microscope_6_1dd5de4a21.jpg" alt="Thermo Scientific DXR3 Raman Microscope" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Raman_Microscope_6_1dd5de4a21.jpg 245w," sizes="100vw" width="650" height="299"><h3>Key capabilities</h3><ul><li>New Particle Analysis functionality for rapid identification and analysis of microparticles</li><li>High-performance confocal Raman microscopy in a robust, fully integrated design</li><li>Fully automated alignment and calibration with no tools or manual procedures required</li><li>Real-time preview, automated fluorescence correction, auto-exposure, and cosmic ray rejection</li><li>System status indicator providing at-a-glance confirmation that the instrument is optimized and ready for data acquisition</li><li>Three-path fine-beam autoalignment to maintain peak performance and sampling integrity</li><li>Active laser power regulation ensuring consistent sample excitation throughout the lifetime of the laser</li><li>Advanced spectrograph design with no moving parts for simplified operation and highly robust detection and calibration</li><li>Pre-aligned, lock-in-place components with automatic recognition and stored alignment, enabling system reconfiguration in seconds</li><li>Interchangeable lasers and components shared across the DXR3 Raman family</li><li>Optional automated polarized Raman spectroscopy for structural information complementary to chemical data</li><li>Add new excitation wavelengths without tools or service engineer intervention</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Raman_Microscope_2_e366caa151.jpg" alt="Thermo Scientific DXR3 Raman Microscope" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Raman_Microscope_2_e366caa151.jpg 204w," sizes="100vw" width="631" height="483"><h3>Laser safety</h3><ul><li>Microscope independently certified as Class 1 laser safe (Note: optional fiber-optic accessories and certain other optional components are Class 3B laser devices and require appropriate laser safety precautions and eyewear)</li><li>Laser is physically blocked from the visual viewing path, preventing eye exposure during sample observation</li></ul><h3>Validation and compliance</h3><ul><li>Complete DQ/IQ/OQ/PQ validation package available, including extensive documentation and automated software protocols</li><li>OMNIC™ D/S software supports compliance with 21 CFR Part 11</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Raman_Microscope_3_62f6baad12.jpg" alt="Thermo Scientific DXR3 Raman Microscope" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Raman_Microscope_3_62f6baad12.jpg 178w," sizes="100vw" width="630" height="553"><h3>Exceptional analytical performance</h3><ul><li>Spatial resolution down to 540 nm on ideal samples</li><li>Confocal depth resolution as fine as 1.7 µm on ideal samples</li><li>Full spectral range of 3500–50 cm⁻¹ captured in a single CCD exposure, eliminating stitching artifacts</li><li>Extended spectral range up to 6000 cm⁻¹ available with the 532 nm laser</li><li>Support for multiple excitation lasers: 455, 532, 633, and 785 nm (high-brightness and high-power options)</li><li>Automatic fluorescence correction available for all excitation lasers</li><li>Research-grade Olympus viewing optics</li><li>Automatic intensity correction enabling spectral comparability between instruments and across different excitation lasers</li><li>Multidimensional wavelength calibration ensuring accurate calibration across the entire spectral range</li><li>Proprietary Triplet spectrograph delivering exceptional peak shape and maintaining focus at all wavelengths</li><li>Software-controlled switching between confocal and high-energy collection modes</li><li>Proprietary algorithms for automated cosmic ray rejection and high-quality laser line filters for artifact-free spectra</li><li>Depolarized lasers to eliminate confusing sample orientation effects</li><li>Active laser power monitoring ensures reproducible excitation power over the laser lifetime and after laser replacement</li><li>Optimized gratings for each excitation laser, avoiding performance compromises associated with shared gratings</li><li>Proprietary autoalignment maintains the system in like-new condition</li><li>Smart-Backgrounds technology automatically removes the CCD dark energy profile</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3_Raman_Microscope_5_ca01560747.jpg" alt="Thermo Scientific DXR3 Raman Microscope" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3_Raman_Microscope_5_ca01560747.jpg 210w," sizes="100vw" width="633" height="471"><h3>Recommended applications</h3><ul><li>Forensics – trace evidence analysis and illicit drug identification</li><li>Pharmaceuticals – polymorphism studies, particulate contamination, and diffusion analysis</li><li>Art restoration and conservation – identification and characterization of pigments, resins, glazes, and inks</li><li>Archaeology – characterization of horn, shell, bone, and ceramic artifacts</li><li>Solar materials – silicon crystallinity and photovoltaic material characterization</li><li>Polymers – inclusions, gel defects, weathering effects, laminate layers, and crystallinity</li><li>Failure analysis – characterization of particulates and small surface features</li><li>Gemology – rapid identification of colored stones, differentiation of natural and synthetic diamonds, characterization of inclusions and adulterants</li><li>Nanotechnology – graphene, carbon nanotubes (CNTs), DLC coatings, and other nanostructures</li><li>Academic research – materials science, biological studies, and a wide range of applied research fields</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_9_5d3708416c.jpg" alt="Thermo Scientific DXR3 Raman Microscope" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DXR_3xi_Raman_Imaging_Microscope_9_5d3708416c.jpg 156w," sizes="100vw" width="650" height="650"><h3>Specification</h3><ul><li>Depth (Metric): 68 cm</li><li>Description: DXR3 Raman Microscope</li><li>Electrical Requirements: 100/240 V, 47/63 Hz</li><li>Electronic Records and Signatures: 21CFR Part 11</li><li>For Use With (Application):&nbsp;<ul><li>Pharmaceutical</li><li>Microplastics</li><li>Forensics</li><li>Polymer/Chemical</li><li>Petrochemical</li><li>Material Science</li><li>Nanomaterials</li><li>Academia</li><li>Energy Storage</li><li>Art Restoration/Conservation</li></ul></li><li>Height (Metric): 61 cm</li><li>Laser Power: Fine Laser Power Control: Power controlled and reported at samples in 0.1 mW increments</li><li>Model: DXR3</li><li>Operating Temperature Range: 16°C to 27 °C</li><li>Resolution:&nbsp;<ul><li>Spatial: 1 µm</li><li>Confocal Depth: 2 µm</li></ul></li><li>Wavelength Range:&nbsp;<ul><li>455 nm</li><li>532 nm high brightness</li><li>532 nm high power</li><li>633 nm high brightness</li><li>633 nm high power</li><li>780 nm</li></ul></li><li>Weight (Metric): 66.5 kg</li><li>Width (Metric): 94 cm</li><li>Type: Microscope</li><li>Unit Size: Each</li></ul>

Products from category Raman spectrometry - page 1

Related content

CATRIN researchers offer a “greener” way to make supercapacitors

News from LabRulezICPMS Library - Week 11, 2026

Basic instructions for participants in a proficiency testing scheme