Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 25th August 2025? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Metrohm and Shimadzu and poster by Thermo Fisher Scientific!<h3>1. Agilent Technologies: Low-Level UV-Vis Haze Detection for Improved Reliability of Li-Ion Battery Electrolytes &nbsp;</h3>Overcoming quality control blind spots with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV-Vis">Cary 60 UV-Vis</a> and the diffuse reflectance accessory (DRA)<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_electrolyte_haze_cary_60_uv_vis_dra_5994_8446en_agilent_2f171821a2.pdf">Full PDF for download</a></li></ul>Lithium-ion batteries (LIBs) have become indispensable in modern life, powering everything from portable electronics to electric vehicles. As demand grows for higher-capacity, longer-lasting, and more efficient batteries, research efforts continue to focus on optimizing every component, including the electrolyte.&nbsp;The electrolyte plays a critical role in battery performance by enabling the transport of ions between the two electrodes. It typically consists of a lithium salt, most commonly lithium hexafluorophosphate (LiPF6 ), dissolved in a mixture of organic carbonate solvents such as ethylene carbonate (EC), ethyl methyl carbonate (EMC), and dimethyl carbonate (DMC). However, these electrolyte formulations are highly sensitive to moisture and prone to degradation over time. This degradation can lead to the formation of particulate matter or impurities that are invisible to the naked eye but can significantly impact electrolyte quality during manufacturing.&nbsp;In this application note, we explore how the Agilent Cary 60 UV-Vis spectrophotometer, paired with an Agilent Cary 60 diffuse reflectance accessory (DRA), can be used to assess LIB electrolyte quality.&nbsp;Traditional UV-Vis transmission compartments can struggle with low-scattering samples like electrolytes, as scattered light may bypass the detector and lead to inaccurate readings. The Cary 60 DRA mitigates this limitation by enhancing light collection efficiency, making it well-suited for low-level haze&nbsp;analysis.<h4>Experimental</h4><h5>Instrumentation&nbsp;</h5>Diffuse transmission spectra and haze measurements were collected using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV-Vis">Agilent Cary 60 UV-Vis spectrophotometer </a>controlled by the Agilent Cary WinUV Color software. The software allows users to select from a range of calculation options, including standardized color coordinate systems such as those defined by the Commission Internationale de l’Eclairage (CIE).&nbsp;For this application, the "Haze as per D1003" calculation mode was selected, which requires four individual scans to be performed using the DRA integrating sphere.<h4>Conclusion&nbsp;</h4>This study demonstrated the effectiveness of the Agilent Cary 60 UV-Vis equipped with a diffuse reflectance accessory (DRA) for assessing the quality of LIB electrolytes through haze measurements. The innovative method enabled the detection of particulates and early signs of degradation that are not visible to the naked eye, but can significantly impact battery performance, safety, and lifespan. Haze levels of the solutions increased notably with storage time and exposure to air, confirming the instrument's sensitivity to moisture‑induced changes in electrolyte composition. Measuring low-scattering samples in a standard UV‑Vis transmission compartment can be difficult because scattered light may miss the detector, causing inaccurate measurements. The Cary 60 DRA improves light collection efficiency, making it ideal for low-level haze analysis. As the integrating sphere collects all scattered light, this technique monitors minor changes in electrolyte condition, which is useful for assessing samples stored or transported under different environmental conditions. With the added advantage of automated calculations and reporting through the Agilent Cary WinUV Color software, the method offers a reliable, user-friendly solution for quality control in LIB electrolyte manufacturing and storage. The Cary 60 UV-Vis method helps manufacturers make informed decisions about handling and using electrolytes, ultimately supporting the production of safer, higher‑performing batteries.<h3>2. Metrohm: Determination of olive oil quality parameters and adulteration with NIR spectroscopy&nbsp;</h3>Near-infrared spectroscopy reduces costs and chemical waste<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nir_125_download_be04b478c5.pdf">Full PDF for download</a></li></ul>Olive oil quality depends on many factors, such as time spent processing olives after harvest, the production process itself, and olive variety. Due to its high price, virgin olive oil in particular is one of the most vulnerable vegetable oils for food fraud. Many parameters are used to determine the oil quality including the iodine value, free fatty acids (FFA), refractive index, fatty acid composition, and aging indicators such as peroxide value (PV), K232, and induction time. Traditional analysis techniques for olive oil testing like titration or gas chromatography (GC) often require hazardous solvents which can pose health risks and increase laboratory costs. In contrast to these standard methods, the analysis with nearinfrared spectroscopy (NIRS) helps to increase productivity and reduce costs, providing quick results for olive oil quality control<h4>EXPERIMENTAL EQUIPMENT&nbsp;</h4>A selection of olive oils with varying quality (137 samples) were measured on the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=220&amp;search=OMNIS+NIR">OMNIS NIR</a> Analyzer Liquid (Figure 1) in transmission mode (1000–2250 nm) using 8 mm disposable vials. The vial temperature was set and monitored at 40 °C with the built-in vial sensor to ensure consistent measurement performance. The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=220&amp;search=OMNIS+software">OMNIS software</a> was used for all data acquisition and prediction model development.<h4>CONCLUSION</h4>This Application Note displays the positive attributes of olive oil analysis with near-infrared spectroscopy. Compared to time-consuming conventional analytical methods, measurements performed with NIRS do not need any sample preparation. This ultimately leads to a workload reduction (Table 3) and reduced costs. Aside from the parameters shown in this Application Note, additional olive oil quality parameters like sterol content or moisture content can also be determined with NIRS.<h3>3. Shimadzu: Evaluation of the Temperature Dependency of Tensile Strength of Electrode Materials for Lithium- Ion Batteries&nbsp;</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00926_en_68e36051d4.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>A thermostatic chamber makes it possible to measure the tensile strength in actual temperature environments.&nbsp;</li><li>Pneumatic flat grips for foil make it possible to reduce the variation in grip force and stabilizing test conditions.&nbsp;</li><li>By using a load cell with a wider accuracy guarantee range than a conventional one, it is possible to perform high-accuracy tests even with a small test force</li></ul>Lithium-ion batteries play an important role in various electronic devices due to their high energy density and excellent charging efficiency. To improve battery performance, battery materials and processing methods are actively being developed. One of the evaluation methods for mechanical properties is strength measurement. The metal (current collector) used in the electrodes of lithium-ion batteries is subjected to tensile force during the manufacturing process. Evaluation of temperature dependence is required because the metal is also subjected to heat during manufacturing. This Application News introduces a workflow consisting of tensile strength evaluation of metal foil used as lithium-ion battery electrodes. The tests were performed under various temperatures to evaluate the temperature dependence of tensile strength. The apparatus used is also described.<h4>Apparatus&nbsp;</h4>Table 1 shows test apparatus configuration. In this experiment, Precision <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=AGS+-V">Universal Testing Machine AGS -V</a> was used and pneumatic flat grips for foil were mounted on it. These grips reduce the swing of the grip faces and their surfaces are processed into special shapes. This reduces the risk of fracture of the specimen at the clamped portion when testing a foil specimen. These pneumatic grips make it possible to mount specimens and to make the gripping force constant for each test. To adjust the temperature of the test space, the Compact-type <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=TCE-N300A">Thermostatic Chamber TCE-N300A</a> was used. It can be operated by the testing machines operation software TRAPEZIUM X-V. This software can control both the chamber and the testing machine in the same display. This function improves the system convenience.<h4>Conclusion</h4>&nbsp;Tensile tests using the AGS-V were conducted on three kinds of metal foil used as electrodes in lithium-ion batteries in the thermostatic chamber TCE-N300A. The test results show that the strength tended to decrease with increasing the temperature in all materials. The elongation at failure tended to increase at 180 °C for C1100 and at 100 °C and 180 °C for A1N30 and A1070.&nbsp;Pneumatic flat grips for foil make it possible to conduct tests without fracture nor slippage of the specimen at the clamped portion.&nbsp;This measurement enables the temperature dependence of the mechanical characteristics of metal foil used as electrodes for lithium-ion batteries to be easily obtained. It is expected to be applied to solving problems such as material selection and processing methods for lithium-ion batteries.<h3>4. Thermo Fisher Scientific: Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for the Analysis of the Spatial Distribution of Trace Elements in Biological Systems&nbsp;</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_65485_icp_ms_imaging_spatial_distribution_trace_elements_asms2019_po65485_en_138f5f9ad8.pdf">Full PDF for download</a></li></ul>Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is widely recognized as a powerful technique for the determination of trace elements in a variety of sample types. It is able to directly and quantitatively assess the amount of an element (e.g. toxic elements such as As or Hg, but also essential elements such as Cu, Zn, or Se). In some cases, not only the concentration, but also the lateral distribution can provide important information when investigating biological systems. Laser ablation imaging is becoming a well-established tool to visualize both naturally occurring and artificially introduced trace elements; however, there are challenges to overcome in order to achieve high lateral resolution and image contrast.<h4>MATERIALS AND METHODS</h4><h5>Test Method&nbsp;</h5>For the analysis, a Teledyne CETAC Technologies LSX-213 G2+ laser ablation system was coupled to a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1206">Thermo Scientific™ iCAP™ TQ ICP-MS.</a> The iCAP TQ ICP-MS was configured with a high sensitivity interface (Table 1) to ensure the detection of analytes even in low concentrations and small amounts of ablated sample. Prior to the measurements, all plasma and interface related settings were tuned automatically and were fully tailored to the LA-based sample introduction by using the autotune procedures provided in the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">Thermo Scientific™ Qtegra™ Intelligent Scientific Data Solution (ISDS) Software.</a><h5>Data Analysis&nbsp;</h5>Both devices (laser ablation system mass spectrometer) were controlled using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">Qtegra ISDS Software</a>. Through the use of dedicated plug-ins, full synchronization of data acquisition, allowing unattended routine operation for overnight runs, was possible. Data acquisition was accomplished using the tQuant virtual evaluation of the Qtegra ISDS Software. Data reduction and image construction were accomplished using self-developed software<h4>What is Elemental Imaging?&nbsp;</h4>Elemental images or maps refer to an LA-ICP-MS analysis that provides information on the elemental distribution across a two-dimensional area of a sample, for example across the surface of a biological tissue section. As the laser is fired at the sample surface, the sample is moved at a defined and constant rate. This means that the time profile of a line scan can be translated into a distance profile. Gathering multiple profiles across the sample generates a 2D image of the elemental distribution in the sample (3D after moving the laser sampling point in the vertical axis), where signal intensity is directly proportional to concentration.<h4>CONCLUSIONS&nbsp;</h4><ul><li>The LA-ICP-MS system described has been shown to be ideally suited for the high spatial resolution bioimaging analysis of various elements in thin sections in both single and triple quadrupole analysis modes.&nbsp;</li><li>The use of triple quadrupole technology in the iCAP TQ ICP-MS system clearly improves the images produced for analytes such as Ca (through the analysis of 44Ca 16O+ at m/z 60), iron (through the analysis of 56Fe 16O+ at m/z 72) or Se (through the analysis of 80Se 16O+ at m/z 96).&nbsp;</li><li>This also enables a wider dynamic range and cleaner backgrounds to reveal additional structural information not detectable by traditional single quadrupole ICPMS.</li></ul>

News from LabRulezICPMS Library - Week 35, 2025

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 1st September 2025? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you brochures by Agilent Technologies and Anton Paar, application note by Shimadzu and poster by Thermo Fisher Scientific!<h3>1. Agilent Technologies: Fast and Easy Measurement of Scattering Samples with the Agilent Cary 60 UV-Vis Spectrophotometer</h3>Characterize more samples with your <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV-Vis">Cary 60 UV-Vis</a> using a diffuse reflectance accessory<ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/br_cary_60_uv_vis_spectrophotometer_5994_8409en_agilent_d4d6f5cb04.pdf">Full PDF for download</a></li></ul>The Agilent Cary 60 UV-Vis spectrophotometer is designed for efficient and accurate routine UV-Vis analysis. When working with scattering samples, traditional transmission measurements can lead to signal loss and inaccurate results. By integrating a diffuse reflectance accessory (DRA), the Cary 60 extends its capabilities to measure scattering samples in both reflectance and transmission modes, ensuring reliable data even with challenging sample types.The Cary 60 UV-Vis DRA uses a 50 mm integrating sphere, seamlessly fitting into the instrument’s sample compartment and allowing setup in less than five minutes. With a range of sample holders—including options for thin films, powders, cuvettes, and filters—the accessory provides maximum flexibility. This versatility enables precise analysis of diverse materials such as films, coatings, powders, and liquids.Applications include solar material evaluation, color and gloss analysis of textiles, paints, inks, and pharmaceuticals, as well as quality control of coatings, optical materials, and electronic components. In transmission mode, the DRA is equally effective for analyzing turbid or translucent samples, making it valuable in industries such as food and beverage, environmental monitoring, and polymer science.Paired with the optional Cary WinUV Color software, the system also supports advanced color measurements, automatically generating QA/QC reports based on recognized color standards. This combination makes the Cary 60 UV-Vis a versatile, user-friendly solution for laboratories that require accurate, reproducible results across a wide range of applications.<h3>2. Anton Paar: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=444&amp;search=Ultratap+500">Ultratap 500</a> Series Automated Tapped Density Analyzers</h3>Near-infrared spectroscopy reduces costs and chemical waste<ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/J49_IP_001_EN_B_Brochure_Ultratap_500_Series_screen_51d4a27e59.pdf">Full PDF for download</a></li></ul>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=444&amp;search=Ultratap+500">Ultratap 500</a> Series from Anton Paar sets a new benchmark in tapped density analysis, delivering durability, compliance, and user-friendly operation. Each instrument guarantees up to 25 million taps without loss of calibration and comes with a three-year warranty, ensuring reliable performance and long service life. With automated methods and user management, laboratories can eliminate operator error and achieve consistent, reproducible results.Equipped with a touchscreen interface, Ultratap 500 provides instant access to 24 built-in ASTM, ISO, and USP methods, including USP 616. Users can also define custom methods, while automatic calculations of bulk density, tapped density, Carr’s Index, and Hausner Ratio simplify data evaluation. The system stores up to 1,000 reports and 100 methods, ensuring efficient record management.Flexibility is key: the Ultratap 500 accommodates cylinder volumes from 5 mL to 1,000 mL, supported by TruLock straps for secure attachment. The analyzer is also the quietest in its class—90% quieter than comparable models—with an optional noise reduction cabinet reducing sound by up to 99%.Available in single- and dual-station models, the Ultratap 500 Series offers full compliance with major international standards for powders, pharmaceuticals, catalysts, pigments, and more. With global service support, fast response times, and comprehensive warranty options, Ultratap 500 ensures maximum uptime and trusted results across industries.<h3>3. Shimadzu: High-Speed Measurement of Microplastics Smaller than 100 μm Collected on a Filter and Efficient Analysis&nbsp;</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00994_en_936f28e894.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>It enables high-speed measurements of microplastics (MPs) smaller than 100 µm that are collected on a filter.</li><li>Particle analysis program can identify the types of MPs and easily analyze color-coded by type and counting the number of MPs.</li><li>In addition to calculating the size of MPs (minor axis, major axis, Feret diameter, and area), it can also estimate the volumes and masses of particles</li></ul>Microplastics (MPs) with diameters ranging from a few µm to 5 mm are widely recognized as an environmental problem in marine environments, and reports of MPs smaller than 100 µm in drinking water are attracting particular attention. 1) To confirm the number and shape of MPs smaller than 100 µm and qualitatively analyze them, samples are usually collected on a filter and observed and measured using an infrared or Raman microscope. For that process, mapping measurements of a specified area is simpler than searching for candidate MPs on the filter and performing point measurements, and it reduces the risk of overlooking particles. However, it is more timeconsuming, and it also requires analyzing the MPs after they are measured to identify the candidates, determine their sizes, aggregate the data, and so on. Therefore, a High-Speed mapping program and particle analysis program were developed to reduce the time required for these measurement and data analysis steps. In this example, High-Speed mapping was used to measure a standard MPs sample, and the particle analysis program was used to analyze the distribution of MPs within the sample.<h4>Measurement Conditions and High-Speed Mapping Program</h4>Measurement conditions are listed in Table 1. Mapping measurements are especially useful for measuring samples with many of target objects in the field of view. Normally, they take longer for larger measurement areas or larger numbers of measurement points, but that can be shortened with the HighSpeed mapping program.&nbsp;The program detects peaks based on data from the first scan at each measurement point and the specified noise level and threshold value settings. If no peak is confirmed, the program moves to the next measurement point. (If a peak is confirmed, the same number of measurements is performed as the number of scans specified.)&nbsp;In this example, a peak detection range of 3,200 to 2,800 cm-1 was specified for detecting the signal from hydrocarbons (C-H), and the data from peaks in that range were scanned the specified number of times.<ul><li>Instruments: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=IRTracer-100">IRTracer-100</a>, AIMsight PF Holder (13 mm dia.)</li></ul><h4>Conclusion&nbsp;</h4>MPs that were collected on a filter were measured using an infrared microscope and the High-Speed mapping program. Because the High-Speed mapping functionality can measure locations in which only candidate MPs are present, samples can be measured faster than with regular mapping methods.&nbsp;And with the particle analysis program, candidate MPs can be specified as components to be analyzed, so particle counts and size distributions within measurement areas can be easily determined. This example also showed that the volume and mass of particles can be estimated.&nbsp;Counting MPs smaller than 100 µm while qualitatively analyzing the particles requires an instrument like an infrared microscope, which enables the High-Speed mapping program or particle analysis program to analyze MPs and MPs data more smoothly.<h3>4. Thermo Fisher Scientific: Rolling over interferences: How triple quadrupole ICP-MS facilitates the analysis of challenging samples for electric vehicles&nbsp;</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_001857_tea_electric_icp_ms_ewcps_po001857_em_en_4b2a2ed6a7.pdf">Full PDF for download</a></li></ul>The continuous development of lithium-ion battery technology is a key step to move away from the combustion of fossil fuels at point of use. Lithium based batteries are the most promising, as they provide high capacity, good cycle stability, at moderate cost. To achieve the intended performance, it is of high importance to assure consistent quality and especially purity of the raw materials used. This includes specifically the cathode material (like binary or ternary alloys containing lithium, cobalt, manganese and nickel) and the electrolyte (lithium hexafluorophosphate and organic compounds), but also other components of the battery. This presentation will provide an overview of how triple quadrupole ICP-MS is able to resolve the analytical challenges encountered when analyzing battery material samples. The presentation will include examples from different components of a battery, including raw materials, electrolytes and cathode materials.<h4>Materials and methods</h4><h5>Instrumentation&nbsp;</h5>A <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1206">Thermo Scientific™ iCAP™ TQe ICP-MS system</a> was used for all analyses. To facilitate the direct analysis of highly concentrated solutions, as typically found when working with cathode materials, the instrument was operated using Argon Gas Dilution (AGD) to automatically dilute the sample aerosol using a clean stream of argon gas, delivered directly from the instrument.&nbsp;To achieve the best possible detection limits on typically challenging elements, a slightly different configuration was applied to the same instrument. For these measurements, the instrument was equipped with a PLUS torch, a direct replacement for the standard torch made from a high purity ceramic material. The PLUS torch helps to reduce the backgrounds typically observed for silicon when using quartz torches and is therefore instrumental in achieving the best possible detection limits for this element.<h5>Data Analysis&nbsp;</h5><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489">Thermo Scientific™ Qtegra™ Intelligent Scientific Data Solution Software</a> was used to operate the instrument and all peripherals, acquire the data and evaluate the results.&nbsp;<h4>Conclusions&nbsp;</h4><ul><li>The use of triple quadrupole ICP-MS and oxygen as a reactive gas provided the advanced performance required for the accurate determination of critical elements, such as arsenic and selenium free from polyatomic interference in a highly complex lithium battery matrix samples showing outstanding analysis performance.&nbsp;</li><li>Triple quadrupole ICP-MS in combination with oxygen as a reactive cell gas is a powerful tool for the analysis of elements having high ionization potentials and numerous spectral interferences.&nbsp;</li><li>Further reduction of the background for silicon is possible when using the PLUS torch, so that significant improvements of the detection limits for silicon can be achieved.</li></ul>

News from LabRulezICPMS Library - Week 36, 2025

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 8th December 2025? Check out new documents from the field of spectroscopy/spectrometry and related techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, LECO, and Shimadzu!<h3>1. Agilent Technologies: Measurement of Opaque Liquids with UV-Vis and ATR</h3>Combining the Agilent Cary 60 UV-Vis spectrophotometer with an ATR fiber-optic probe<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_cary_60_atr_opaque_liquids_5994_8652en_agilent_e7b9efab4d.pdf">Full PDF for download</a></li></ul>Today, ATR is considered synonymous with FTIR spectroscopy, being the most widely used sampling technique. However, ATR can also be applied to UV-Vis spectroscopy, offering particular benefits for measuring opaque liquids with a fiber-optic probe.&nbsp;Samples such as paints, inks, food colorings, sunscreens, and liquid medications are often highly pigmented, rendering them optically opaque. In some cases, measurement of these types of samples using a standard 10 mm path length cuvette may be possible, but only after several hundred‑fold dilution, requiring significant solvent consumption and introducing the possibility of large dilution errors. In the case of emulsion samples such as paints and sunscreens, dilution is often not possible without the sample "splitting" and separating into its component parts.&nbsp;ATR spectroscopy is an innovative sampling technique that overcomes these challenges. In ATR, incident light from the spectrometer is directed into a measurement crystal at an angle. Internal reflections within the crystal generate an evanescent wave at the crystal surface, allowing samples in direct contact with the crystal to interact with the standing wave and absorb some of the light energy.&nbsp;In a UV-Vis fiber-optic ATR probe, a commonly used crystal is sapphire, with the incident light directed into the crystal to form an angle of 60° at the crystal surface. The crystal is designed to create three bounces at the surfaces (Figure&nbsp;1). The "effective height" of the wave above the surface is a function of the relative refractive indices of the crystal and the sample medium, the angle of incidence, and the wavelength. The multiple bounces extend the effective path length. For this probe, the effective pathlength at 250&nbsp;nm is approximately 3 μm and increases to approximately 13 μm at 1,000&nbsp;nm.<h4>Experimental&nbsp;</h4>Example data were collected using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+60+UV-Vis">Cary 60 UV-Vis spectrophotometer </a>equipped with a fiber-optic interface and Hellma Katana XP 6, 3-bounce ATR probe (Hellma part number PK1KSSZUEASM210N). Spectra were collected by first measuring a baseline using the clean crystal, followed by sample measurement with the crystal immersed in the sample. The Agilent <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=Cary+WinUV">Cary WinUV software</a> was used to collect the spectra as well as to process the measured spectra. All spectra were collected using the measurement conditions shown in Table 1.<h4>Conclusion&nbsp;</h4>This application note demonstrates how an Agilent Cary 60 UV-Vis spectrophotometer, when combined with a Hellma Katana XP 6 ATR probe, provides a practical and easy-to-use solution for measuring optically opaque liquids that would otherwise require extensive dilution, and for monitoring reactions with absorbance changes too large for conventional methods. The Cary 60 UV-Vis with the ATR probe combination is a powerful tool for a wide range of applications, including routine quality control, R&amp;D studies, and research and teaching laboratories.<h3>2. LECO: Determination of Nitrogen/Protein in Meat and Plant-Based Meat Alternatives</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/FP_828_NITROGEN_PROTEIN_MEAT_PLANT_BASED_MEAT_ALTERNATIVES_203_821_680_266d8d12f8.pdf">Full PDF for download</a></li></ul>Protein is one of the most significant nutrient components in food products. The accurate and precise determination of protein not only plays a role in the characterization of nutritional or dietary value in food materials but is also the key to the economic value of these materials. Protein in meat products is most commonly calculated using the measured nitrogen content in the sample and a multiplier or conversion factor (commonly 6.25). Nitrogen determination is performed using either the classical wet chemical method (Kjeldahl) or a combustion method (Dumas). The Kjeldahl method involves sample digestion, distillation, and ammonia determination typically by titration. This method involves time-consuming sample preparation and the use of hazardous materials. The LECO FP828 is a nitrogen determinator that utilizes an automated combustion (Dumas) method and provides accurate and precise results in approximately three minutes. This eliminates involved sample preparation and the use of hazardous materials resulting in a rapid, cost-effective method for the quality control of the production of meat and plant-based protein products.<h4>Instrument Model and Configuration&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=24&amp;search=FP828">LECO FP828</a> is a combustion Nitrogen/Protein determinator that utilizes a pure Oxygen environment in a vertical quartz furnace, ensuring complete combustion and superior analyte recovery. A thermoelectric cooler removes moisture from the combustion gases before they are collected in a ballast. The combustion gases equilibrate and mix in the ballast before a representative aliquot (3 cm3 or 10 cm3 volume) of the gas is extracted and introduced into a flowing stream of inert gas (Helium or Argon) for analysis. The aliquot gas is carried to a thermal conductivity cell (TC) for the detection of Nitrogen (N2).Thermal conductivity detectors work by detecting changes in the thermal conductivity of the analyte gas compared to a reference/carrier gas. The greater the difference between the thermal conductivity of the carrier gas and the analyte gas, the greater sensitivity of the detector.&nbsp;The FP828 supports either the use of Helium or Argon as the instrument's carrier gas. When used as a carrier gas, Helium provides the highest sensitivity, and the best performance at the lower limit of the Nitrogen range.&nbsp;The thermal conductivity difference between Argon and Nitrogen is not as great as the thermal conductivity difference between Helium and Nitrogen, therefore the detector is inherently less sensitive when using Argon as a carrier gas.<h4>TYPICAL RESULTS&nbsp;</h4>Data was generated utilizing a linear, force through origin calibration using ~0.25 g of LECO 502-896 (Lot 1007) LCRM EDTA (9.59% N). The calibration † was verified using ~0.1 g of LECO 502-642 (Lot 1020) LCRM Phenylalanine (8.46% N). A protein factor of 6.25 was used for all samples to calculate the protein content.<h3>3. Shimadzu: Analysis of Combustion Ash from Biomass Power Generation by EDXRF</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00716_en_9995b70230.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>EDXRF enables analysis of Na and K, which cause fluidization problems (agglomeration) in circulating fluidized bed boilers in biomass power generation.</li><li>Simple qualitative/quantitative analysis of elements is possible with minimal sample preparation.</li><li>Comparative analysis of heterogeneous samples in the as-received condition and in the homogenized condition after crushing is possible.</li></ul>In biomass power generation, electricity is generated by using bioresources (biomass) derived from animal and plant sources as a carbon neutral fuel. Biomass power is expected to contribute to reducing total CO2 emissions, and in recent years, the number of woody biomass power plants using wood chips, pellets, and palm kernelshells(PKS) hasincreased. Circulating fluidized bed (CFB) boilers used in woody biomass power generation generate power by circulating and burning biomass fuel together with silica sand, which is as a fluidized bed medium. However, alkali metal elements (Na, K) contained in the fuel adhere to the surface of the silica sand and combustion ash, causing the particles to stick together and form agglomerates (lumps, coarse particles), which are considered to cause boiler damage and fluidization problems (agglomeration) in the fluidized bed 1) .&nbsp;In this article, a Qual-Quant analysis of PKS combustion ash and its coarse particles was conducted using an <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=EDX-8100">EDX-8100</a> energy dispersive X-ray fluorescence spectrometer (EDXRF). Since adhesion of alkali metal elements was detected on the surface of agglomerated lumps, which are considered to cause the problem of agglomeration, analysis of combustion ash by EDXRF can contribute to operational management of combustion furnaces by monitoring the conditionsin the combustion furnace.<h4>Conclusion&nbsp;</h4>Based on the results of a qualitative analysis of lumps (coarse particles of bottom ash), which are thought to cause agglomeration (defluidization) of the fluidized bed, in the combustion ash of PKS, it was found that alkali metal elements (Na and K) had adhered to the surface of the particles. Since EDXRF enables Qual-Quant analysis of elements with only simple sample preparation, it is considered a useful technique for monitoring the progress of agglomeration and deterioration of the silica sand in the power generation using PKS or woody biomass. Periodic measurements by EDXRF can also be expected to prevent damage and deterioration in combustion furnaces and equipmentstops due to defluidization.

News from LabRulezICPMS Library - Week 50, 2025

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

LECO Training Course FP/CN/CNS-928 Series

LECO Online Training 844/744 Series Cooling Lamp Maintenance

36th MassSpec Forum Vienna 2026

Novel Advancements in Trace Level Determination and Longterm Stability of Metals in TMAH and UPW matrices

Meet Compact-Q DEER Spectrometer, Your Gateway to Quantum Innovation

Process Raman: A Reliable and Versatile Tool For Downstream Process Monitoring and Control For mAB Production