<h4>Do you use results of chemical analyses as a basis for your decisions and judgements?</h4>Those of us working in accredited laboratories or dealing with issues concerning the quality of measurements, would like to inform you about some important changes concerning the way the results of measurements are presented. These changes make it easier for you as an end-user to make correct decisions.<h4>Nobody is perfect!</h4>Results of analyses cannot be perfect! We hope this does not come as a big surprise to you. We use the term measurement uncertainty to describe this lack of perfection.<h4>The analytical process</h4>In each step of the analytical work, from sampling to the final measurement, deviations from the true value occur and measurement conditions vary. We take measures and perform controls regularly to assure that these deviations and variations together are small enough to make sure the end result fulfils your requirements. When we don’t have full information about all of the steps, e.g. when sampling and initial sample preparation are performed by you as a customer, you can assist us by providing detailed information about how that work was performed. Our experts are ready to advise on all matters regarding sampling. Please contact the laboratory beforehand.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Important_information_to_our_customers_concerning_the_quality_of_measurements_2_d885f6b051.jpg" alt="Eurachem: The analytical process" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Important_information_to_our_customers_concerning_the_quality_of_measurements_2_d885f6b051.jpg 139w," sizes="100vw" width="562" height="630"><h4>Results should be fit-for-the-purpose</h4>The accuracy of the results must of course not be too low nor too high since this would increase the costs. It should be fit for the intended purpose. If you are unsure on what level of accuracy you need, do not hesitate to contact the laboratory.<h4>Uncertainty and limiting values</h4>Many analyses are made to assure that limiting values are not exceeded. Without information about the measurement uncertainty it may appear to be very easy to make decisions, but these decision may be incorrect, with, e.g. economical consequences when rejecting instead of accepting a product, judicial consequences when returning a verdict of guilty instead of not guilty, or medical consequences when carrying out an unnecessary treatment. There are numerous examples!<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Important_information_to_our_customers_concerning_the_quality_of_measurements_3_f0ef8edc77.jpg" alt="Eurachem: Uncertainty and limiting values" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Important_information_to_our_customers_concerning_the_quality_of_measurements_3_f0ef8edc77.jpg 245w," sizes="100vw" width="932" height="453">With a realistic measurement uncertainty the information included in the result becomes much more useful.<h4>It will be easier to compare results</h4>Most laboratories have until now chosen not to state measurement uncertainty in the test report. Instead, such information has only been given when the customer has asked for itIn the future, information about the measurement uncertainty will appear more frequently in the test report. It is also possible that you will bump into new and unfamiliar quality terms. This is due to the fact that there are new international guides and standards describing a common and partly new terminology. One of the objectives is to make it easier for you as a customer to compare test results.<h4>What could it look like?</h4>When reporting the test result we will give the normal information about what we have measured. When the results are followed by uncertainty statements, they are presented as intervals within which the true values are expected to lie with a certain level of confidence (usually 95%). In the example below the lead content is 1.65 ± 0.15 mmol·kg-1, that is between 1.50 and 1.80. The measurement uncertainty is also often reported relatively, in %.<ul><li>Total lead content (Pb): 1.65 mmol·kg-1&nbsp;</li><li>Measurement uncertainty: 0.15 mmol·kg-1 (9.1%)&nbsp;</li></ul>The stated uncertainty is an expanded measurement uncertainty (U). It was obtained by multiplying the combined standard uncertainty uc with a coverage factor k equal to 2. This corresponds approximately to a 95 % confidence interval.<h4>All’s well that ends well...</h4>The requirements for a consistent way of reporting test results are increasing. Therefore, those of us involved in measurements are eager to assure ourselves that we understand your needs. You will notice this in your contacts with us before, during and after the test assignment. We hope that you will be satisfied with the final result.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Important_information_to_our_customers_concerning_the_quality_of_measurements_4_f870b1a7b8.jpg" alt="Eurachem: All’s well that ends well..." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Important_information_to_our_customers_concerning_the_quality_of_measurements_4_f870b1a7b8.jpg 159w," sizes="100vw" width="713" height="701">

Important information to our customers concerning the quality of measurements

<h4>A comprehensive analysis of renewable fuel testing technologies, automation, and ISO-compliant proximate analysis</h4>The growing demand for renewable energy has increased the importance of accurate biofuel characterization. Biomass feedstocks and finished fuels must be carefully analyzed to ensure quality, efficiency, and compliance with international standards. LECO analytical instrumentation supports this work through automated and highly reliable analytical technologies.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/TGA_801_Termogravimetricka_analyza_vlhkosti_popela_tekavych_latek_a_ztraty_zihanim_b73c4cf493.jpg" alt="LECO: Advancing Biofuel Characterization with LECO Analytical Instrumentation: LECO’s TGA801, used for automated biofuel analysis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_TGA_801_Termogravimetricka_analyza_vlhkosti_popela_tekavych_latek_a_ztraty_zihanim_b73c4cf493.jpg 245w," sizes="100vw" width="1164" height="435"><h3>Automated Proximate Analysis with LECO’s TGA801</h3>The<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1877"> LECO TGA801 thermogravimetric analyzer </a>is designed for automated determination of moisture, volatile matter, and ash content in solid fuels. The system can analyze up to 19 samples simultaneously and combine all three parameters into one automated run, improving efficiency and reproducibility.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_31e96f1c96.jpg" alt="LECO Advancing Biofuel Characterization with LECO Analytical Instrumentation: TGA801 system with ceramic turntable and crucibles for ISO 18123 volatile matter determination." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_31e96f1c96.jpg 235w," sizes="100vw" width="860" height="573"><h3>Comparison with ISO Reference Methods</h3>To validate the performance of the automated TGA801 system, comparative studies were conducted using internationally recognized ISO reference methods. Moisture determination was compared with ISO 18134, ash content with ISO 18122, and volatile matter with ISO 18123. These standards prescribe specific temperatures and analytical procedures, but also permit automated systems if equivalent performance can be demonstrated.The comparison included a broad range of materials such as wood pellets, peat, coal, plastics, and waste-derived fuels. Moisture and ash results generated by the TGA801 showed extremely close agreement with the manual ISO procedures. This strong correlation confirms that automated thermogravimetric analysis can provide the same reliability as conventional methods while greatly increasing throughput and reducing labor requirements.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_2_3887128788.jpg" alt="LECO: Advancing Biofuel Characterization with LECO Analytical Instrumentation: ISO method crucibles for manual volatile determination." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_2_3887128788.jpg 172w," sizes="100vw" width="1264" height="1145"><h3>Volatile Matter Correlation Results</h3>For volatile matter analysis, both ISO and TGA procedures measure mass loss during a fixed period at 900 °C. The TGA method introduces an additional heating ramp from the moisture determination step at approximately 105 °C to the higher volatile matter temperature. Despite this procedural difference, the resulting data demonstrated excellent agreement.Testing performed on wood pellets showed a strong linear relationship between the ISO and TGA methods with an R² value of approximately 0.94. The maximum deviation observed was only 1.06%, while the average difference between methods was approximately 0.1%. These results confirm the ability of the TGA801 to produce highly accurate volatile matter measurements across a variety of biomass and fuel matrices.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_2_40f7189cef.jpg" alt="LECO Advancing Biofuel Characterization with LECO Analytical Instrumentation: Correlation and comparative data between ISO methods and LECO TGA analysis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_2_40f7189cef.jpg 172w," sizes="100vw" width="1065" height="967"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_1_7519e8e646.jpg" alt="LECO Advancing Biofuel Characterization with LECO Analytical Instrumentation: Correlation and comparative data between ISO methods and LECO TGA analysis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Advancing_Biofuel_Characterization_with_LECO_Analytical_Instrumentation_1_7519e8e646.jpg 228w," sizes="100vw" width="1641" height="1120"><h3>Advantages of Automated Biofuel Analysis</h3><ul><li>High sample throughput with simultaneous multi-sample analysis.</li><li>Fully automated workflows reducing operator involvement.</li><li>Integrated determination of moisture, ash, and volatile matter in one run.</li><li>Excellent reproducibility and data consistency.</li><li>Strong agreement with ISO reference methods without additional calibration.</li><li>Improved data security and laboratory efficiency.</li><li>Suitable for research laboratories, industrial quality control, and fuel certification.</li></ul><h3>Automate Your Lab Today</h3>LECO analytical instrumentation provides a comprehensive solution for modern biofuel characterization. From calorific value determination and elemental composition analysis to ash fusibility and automated proximate analysis, these technologies support both scientific research and industrial production with fast, reliable, and reproducible results. The TGA801 demonstrates how automation can significantly improve laboratory efficiency while maintaining full compliance with ISO reference methods. By integrating moisture, ash, and volatile matter analysis into a single automated workflow, the system reduces labor requirements, increases throughput, and enhances data quality. As renewable energy continues to expand globally, advanced analytical systems will remain essential for ensuring fuel quality, supporting regulatory compliance, and driving innovation in sustainable energy technologies. <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1877">Explore the features of the LECO TGA801 today.</a>

Advancing Biofuel Characterization with LECO Analytical Instrumentation

In the week from July 6, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 500 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Lunch and Learn Tips and Tricks Series: Trace Elemental Analysis (ICP-OES &amp; ICP-MS)</h5><ul><li>Tu, 7.7.2026 12:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5977">Registration</a></li></ul>Learn practical tips to optimize ICP-OES and ICP-MS performance, improve data quality, streamline troubleshooting and maintenance, and enhance sample preparation for more efficient elemental analysis.<h5>2. SelectScience: Expanding the 4D-STEM Toolbox for Advanced Materials Characterization</h5><ul><li>Tu, 7.7.2026 15:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6318">Registration</a></li></ul>Explore how Timepix4 detector technology advances 4D-STEM workflows, enabling high-resolution imaging, data-driven acquisition, and new opportunities in electron microscopy.<h5>3. Anton Paar: Microwave Digestion: The Foundation of Accurate Trace Metal Analysis</h5><ul><li>We, 8.7.2026 09:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6321">Registration</a></li></ul>Build robust workflows for trace metal analysis. Learn how microwave digestion ensures fast, contamination-free, and complete sample preparation across complex food matrices.<h5>4. Wiley: From liquids to solids: expand what your UV-Vis-NIR Spectrometer can do</h5><ul><li>We, 8.7.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6367">Registration</a></li></ul>Discover how the Agilent Cary UV-Vis-NIR spectrometer, together with Specac accessories, enables reliable analysis of liquids, powders, films, pellets, and highly scattering solid samples.<h5>5. SelectScience: The next generation ICP-MS designed to wow trace element analysts</h5><ul><li>We, 8.7.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6320">Registration</a></li></ul>Upgrade your trace-element analysis. Discover how the new Agilent 9500 ICP-MS eliminates interferences and simplifies method development for complex matrices.<h5>6. LECO: Dry Matter and Ash Determination in Wastewater and Sewage Sludge</h5><ul><li>Th, 9.7.2026 16:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6324">Registration</a></li></ul>Optimize wastewater analysis. Learn how automated thermogravimetric analysis (TGA) replaces manual drying and ashing steps to determine dry matter and ash in sewage sludge.<h5>7. Waters Corporation: Cracking the Code on Nitrogen Methods</h5><ul><li>Th, 9.7.2026 17:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6327">Registration</a></li></ul>Learn the fundamentals of nitrogen analysis for wastewater testing. Explore analytical methods, QA/QC, sample handling, compliance reporting, and troubleshooting for accurate environmental monitoring.<h5>8. Agilent Technologies: ICP Expert 7.8: Booming ICP-OES Software Innovation</h5><ul><li>Th, 9.7.2026 20:00 CEST</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/6368">Registration</a></li></ul>Discover what's new in ICP Expert™ 7.8 and how the latest software innovations can improve data quality, simplify routine operation, and increase day-to-day laboratory efficiency.

Webinars LabRulezICPMS Week 28/2026

Article

Product

Webinars

Application

Academy

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator for the American iron and steel industry.  Today, almost 80 years later, LECO is recognized globally as a leader in the development of high-quality analytical instrumentation, mass spectrometers, comprehensive two-dimensional chromatography, metallography & optical equipment as well as consumables.

LECO

Mettler-Toledo

Agilent Technologies

Thermo Fisher Scientific

Quantum Analytics

Shimadzu Corporation

We’ll explore polymer characterization, including quick polymer identification for recycling purposes, identifying product defects or failures for quality control, reverse engineering to facilitate product development. We’ll dive into polymer research – an active area of scientific endeavor where performance and a reduced environmental impact are key elements of interest. Learn why vibrational spectroscopy (infrared (IR) and Raman) instruments are useful for the analysis of polymers in an industrial setting, as IR and Raman are highly specific and sensitive tools that are non-destructive and easy to use.
During the session, we’ll offer clear examples that demonstrate the effectiveness of IR and Raman analysis in each of these categories.
<h5>Key webinar take-aways:</h5>
<ul>
<li>The importance of polymer research where performance and a reduced environmental impact are key elements of interest.</li>
<li>Utilizing vibrational spectroscopy (infrared (IR) and Raman) as a useful tool for the analysis of polymers in an industrial setting.</li>
<li>IR and Raman are highly specific and sensitive tools that are non-destructive and easy to use.</li>
<li>Examples will be presented demonstrating the effectiveness of IR and Raman analysis in each of these categories.</li>
</ul>
<blockquote>
Presenter: Dr. Tom Tague (Applications Manager, Bruker Corporation)
</blockquote>
<blockquote>
Dr. Tom Tague is the Applications Manager for Bruker Optics. He is also a member of the Visiting Advisory Committee of the Metropolitan Museum of Art in New York and the Strategic Advisory Board of Amplified Sciences. Dr. Tague received his Ph.D. from the University of Utah in Physical Chemistry and his B.S. also in Chemistry from the University of Texas at San Antonio. He also conducted his postdoctoral research at the University of Virginia working with Professor Lester Andrews. He is a member of the American Chemical Society, Society for Applied Spectroscopy, American Physical Society, and the Optical Society of America. Dr. Tague is active in developing new methods and instrumentation with the goal of improving the sensitivity and detection limits of spectroscopy related applications. Tom has more than 90 publications and 5 Patents.
</blockquote>

Pixabay/Adrian Malec: Polymer Science A to Z: Getting Answers from FTIR and Raman Analyses

Polymer Science A to Z: Getting Answers from FTIR and Raman Analyses

Let’s tackle the science of polymer analysis using the power of spectroscopy, including identification, quality control and reverse engineering. 

Polymer Science A to Z: FTIR and Raman Analyses

From the upstream to the downstream of the lithium-ion battery industry chain, the quality control of raw materials and products requires macro and trace elemental composition analysis to test anode and cathode materials, electrolytes, separators, and recycled materials. ICP-OES is an ideally suited technique for the analysis of these materials due to its combined analytical performance and robustness.
During this talk, a review of data collected from ICP-OES on various battery materials will be discussed with special emphasis on high TDS samples. 
<blockquote>
Presenter: Ana García González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>

Agilent Technologies: Elementar Analysis of Lithium-on (Li-ion) Batteries

Lithium-Ion Battery Industry Chain: Quality Control Insights from Elemental Analysis of High TDS Raw Materials and More by ICP-OES

During this talk, a review of data collected from ICP-OES on various battery materials will be discussed with special emphasis on high TDS samples.

Quality Control Insights from Elemental Analysis by ICP-OES

Review of the potential use of FTIR technology for the identification and quantification of sugars in alcoholic beverages and of sugars and sweeteners in food industry products such as juices and soft drinks, including examples of the use of concentration prediction models.
<blockquote>
Presenter: Rogelio García Juárez (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Rogelio García has a Bachelor’s degree in Pharmaceutical Chemistry from the University National of Mexico and a Master´s degree in Environmental Engineering from the National Polytechnic Institute. He worked in environmental laboratories in the development of methods and applications in water, soil, and air and method design for the pharmaceutical and food industry. He also worked in the implementation of quality management systems in laboratories to obtain accreditation in the 17025 standard, validation process, and analysis of the uncertainty of the method. In 2015, he joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, FTIR, and Raman techniques, at Agilent México and Latin America.
</blockquote>

Agilent Technologies: Use of FTIR Technology for the analysis of Sugars and Sweeteners in alcoholic Beverages and in the Food Industry

Use of FTIR Technology for the analysis of Sugars and Sweeteners in alcoholic Beverages and in the Food Industry

Use FTIR technology for the identification and quantification of sugars in alcoholic beverages and of sugars and sweeteners in food industry product.

FTIR Technology for the analysis of Sugars and Sweeteners

All generally-required parameters for microplastics analysis, e.g., size, shape, and identification, are done using the Agilent 8700 LDIR.
<blockquote>
Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: Turnkey Microplastics Analysis

Turnkey Microplastics Analysis

All generally-required parameters for microplastics analysis, e.g.,  size, shape, and identification, are done using the Agilent 8700 LDIR.

Shimadzu proudly presents a webinar highlighting several Material Science instruments ideal for USP Methods and Data Integrity Challenges:
<ul>
<li>Thermal Analysis Instruments for USP Methods &lt;891&gt;: Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) are ideal for purity, solvent determinations, polymorphism studies, and quantification analysis. In addition, USP 661.1, 661.2 for Plastics Packaging.
</li>
<li>Shimadzu Laser Diffraction Particle Size Analyzers: USP &lt;429&gt; particle sizing for the pharmaceutical industry
</li>
<li>EDX-7000 X-ray Fluorescence Spectrometer for USP &lt;735&gt;, USP &lt;232&gt; for Elemental Impurities Analysis
</li>
<li>EZ-X Universal Tester to determine the compression strength of pills/tablets, press-through-packaging evaluation, syringe needle-injectability tests, syringe extrusion testing, and peel strength of adhesive bandages
</li>
</ul>

Shimadzu: Beyond Chromatography… Shimadzu’s Material Science Solutions for the Pharmaceutical Industry

Beyond Chromatography… Shimadzu’s Material Science Solutions for the Pharmaceutical Industry

Several Material Science instruments ideal for USP Methods and Data Integrity Challenges.

Beyond Chromatography… Shimadzu’s Material Science Solutions

Automatic determination of ionic and nanoparticle contamination in semiconductor process chemicals and on silicon production wafers has become increasingly important.
Elemental Scientific offers a wide range of products to monitor contamination in semiconductor materials. ScoutDX enables online, automated determination of single digit and sub-ppt ionic contamination in a wide range of process chemicals at greater than 300m distances. ScoutNANO adds the capability to perform automated nanoparticle determination, reference material calibration, and hardware for long-term nanoparticle solution stability. RadianVPD is a high speed VPD system for determining on-wafer contamination, offering the highest throughput VPD system available with a wide range of options for both production and R&amp;D environments.
<blockquote>
Presenter: Kyle Uhlmeyer (RadianVPD Applications Manager, Elemental Scientific)
</blockquote>
<blockquote>
Kyle Uhlmeyer is the RadianVPD applications manager for Elemental Scientific. He has been with ESI for more than 10 years, and worked on a wide range of projects. In the past 5 years he has helped develop, install, and support semiconductor products such as ScoutDX, prepFAST S, and RadianVPD.
</blockquote>
<blockquote>
Presenter: Austin Schultz (Project Engineer, Elemental Scientific)
</blockquote>
<blockquote>
Austin Schultz is a project engineer for Elemental Scientific. In his 10 years at ESI he has helped develop products ranging from hydride generation to inline-autodilution to low viscosity sample transfer, he specializes in ultrapure chemical analysis for semiconductor customers.
</blockquote>
<blockquote>
 Presenter: Bert Woods (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Joined the Agilent ICP-MS team in 2004, with previous employment in the semiconductor industry with Dominion Semiconductor (IBM/Toshiba) and Micron. Bert is a 1997 Chemistry graduate of Radford University in Virginia and an avid Washington DC Sports fan.
</blockquote>

Agilent Technologies: Automated Online Semiconductor Monitoring with ScoutDX, ScoutNANO, and RadianVPD

Automated Online Semiconductor Monitoring with ScoutDX, ScoutNANO, and RadianVPD

Elemental Scientific offers a wide range of products to monitor contamination in semiconductor materials.

Automated Online Semiconductor Monitoring

<ul>
<li>Working principle and component parts of a lithium-ion battery</li>
<li>Thermal analysis techniques used in battery investigations</li>
<li>DSC examples: cathode, separator, binder, electrolyte</li>
<li>TGA examples: cathode, anode, separator, binder</li>
<li>TMA and DMA examples: separator membranes</li>
<li>Choosing the best thermal analysis technique for your application</li>
</ul>
The increasing market of consumer electronics, smartphones, and electric vehicles is pushing battery research forwards to provide safer, lower-cost, and lightweight/high-capacity solutions. For example, investigating the safety risks associated with thermal runaway is particularly important for lithium-ion batteries in electric vehicles.
<h3>Thermal Analysis Techniques for Battery Analysis</h3>
Thermal analysis techniques play a vital role in the successful research and development of advanced battery technology. They are also ideal for carrying out routine quality control checks on finished products. The four main techniques of DSC, TGA, TMA, and DMA are particularly effective for investigating temperature-dependent effects such as glass transition, crystallization, melting behavior, purity, visco-elastic behavior, expansion, shrinkage, and decomposition. Evolved gas analysis combined with TGA can also provide important information regarding the products of decomposition.
Join the live webinar to discover more, where you will also get the opportunity to ask our experts your questions!
<blockquote>
Presenter: Angela Hammer (Dr. sc. nat. ETH)
</blockquote>
<blockquote>
Dr. Angela Hammer received a Ph.D. in Analytical Chemistry (development of immobilized components for the use in ion-selective electrodes based on polyurethane membranes) from the Institute of Organic Chemistry at the Swiss Federal Institute of Technology in Zürich, Switzerland. She then joined Sika Technology AG in Zurich, Switzerland, as an analytical chemist. In 2007, she joined METTLER TOLEDO and has worked there since as an application specialist for Thermal Analysis. In her present position, she uses, teaches, and supports DSC, TGA, TMA, and DMA instruments for the METTLER TOLEDO’s Materials Characterization Group located at the head office in Switzerland.
</blockquote>

METTLER TOLEDO: Thermal Analysis of Lithium-Ion Batteries

Thermal Analysis of Lithium-Ion Batteries

Key Techniques for Studying Anode, Cathode, Separator, Binder, and Electrolyte Materials

The quality of Li-Ion Battery (LiB) raw materials (LiOH, Li2CO3), especially the ratio of the macro elements and the concentration of impurities, has a significant impact on battery performance as well as safety. Therefore, it is critical to monitor and address the presence of inorganic impurities in these salts.
LiB raw materials typically have high total dissolved solids (TDS) content, exhibit high background signals, and contain high concentrations of easily ionized elements. Those challenges, along with managing spectral interferences, can introduce inaccuracies into the results. ICP-OES is an ideally suited technique for the analysis of lithium salts due to its analytical performance and robustness and combined with the state-of-the-art Lithos autodilutor can simplify and speed-up sample analysis and improve long-term stability. Join this webinar if you would like to learn more.
<blockquote>
Presenter: Ana García González (Atomic Spectroscopy Application Scientist, Agilent Technologies)
</blockquote>
<blockquote>
Ana Garcia is the Atomic Spectroscopy Application Scientist at Agilent Technologies. Ana has a broad background in atomic spectroscopy technologies, including international experience developing and validating analytical spectroscopy methods for the geochemical industry. She has also published in the fields of molecular spectroscopy and chemometrics. Ana holds a MSc in plant Biotechnology at CINVESTAV, México, and a Bachelor of Science in Biotechnology Engineering.
</blockquote>

Agilent Technologies: Analysis of Multiple Elements in Lithium Salts using an Autodilution ICP-OES Workflow

Analysis of Multiple Elements in Lithium Salts using an Autodilution ICP-OES Workflow

ICP-OES is an ideally suited technique for the analysis of lithium salts due to its analytical performance and robustness

Elements in Lithium Salts using an Autodilution ICP-OES

In the drive towards reducing dependence on burning fossil fuels for energy generation, several technologies have become established as front runners in the race to reduce carbon emissions and improve air quality.
One of the most significant is lithium ion battery technology and a rapid ramp up in production of these batteries is currently underway globally. As a result, a corresponding increase in analytical testing of the battery component materials has arisen.
Elemental analysis techniques such as ICP-OES and ICP-MS are vital for both research and quality control analysis of cathode, electrolyte and anode materials. This presentation gives a complete overview of how ICP-OES and ICP-MS analysis supports every step in the battery manufacturing value chain, from raw material screening and refining, through battery cell material research and QA/AC, to recycling and environmental analysis.
The presentation covers the following topics:
<ul>
<li>Introduction to ICP-OES and ICP-MS and what these techniques provide for battery material analysis
</li>
<li>Discussion of specific analysis examples, including bulk composition and impurity measurement of cathode active materials and electrolytes and determination of trace elements in anode materials
</li>
</ul>
By viewing this presentation, you will learn:
<ul>
<li>The basics of ICP-OES and ICP-MS technology
</li>
<li>How these technologies support battery material analysis, from raw materials to recycling
</li>
<li>What performance they achieve, demonstrated with selected analysis examples
</li>
</ul>
Who should view this presentation?
<ul>
<li>Battery material analysis laboratory managers and analysts
</li>
<li>Battery cell manufacturers and their QA/QA personnel
</li>
<li>Recycling specialists, particularly those working with battery metals such as Li, Ni, Mn, Fe and Co
</li>
<li>Scientists working in battery research and development
</li>
<li>Environmental monitoring laboratory managers
</li>
</ul>
<blockquote>
Presenter: Simon Nelms (ICP-MS Product Marketing Manager, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Presenter: Sukanya Sengupta (Application Specialist Trace Elemental Analysis, Thermo Fisher Scientific)
</blockquote>

Thermo Scientific: Powering Up Battery Materials Analysis using ICP-OES and ICP-MS

Powering Up Battery Materials Analysis using ICP-OES and ICP-MS

How ICP-OES and ICP-MS analysis supports every step in the battery manufacturing value chain.

Powering Up Battery Materials Analysis by ICP-OES and ICP-MS

From the lab to gigafactory, twin-screw extrusion (TSE) is highly beneficial in battery research and development due to its ability to produce superior electrode quality. This method is recognized for its effective distributive and dispersive mixing capabilities, resulting in homogeneous electrode materials with excellent dispersion of all ingredients.In addition, twin-screw extrusion also supports continuous operation, an essential factor to improving process yields in battery manufacturing. And it’s not limited to just wet processing, this novel twin-screw extrusion can handle solvent-less and complete dry formulations – recognized as the way forward in the development of new battery materials.<h4>Join this webinar to:&nbsp;</h4><ul><li>Learn where in the process TSE can be used and what are the advantages</li><li>How to tailor the process parameters, optimizing both your wet or dry formulations</li><li>Explore novel ways to integrate an extruder in a glove-box to save lab and dry-room space</li><li>Use the opportunity to interact during the Q&amp;A session with our application expert.</li></ul><blockquote>Presenter: Dr. Ing. Annika Voelp (Process Application Specialist, Thermo Fisher Scientific)</blockquote>

Thermo Fisher Scientific: New twin-screw extrusion: Powering the next generation of battery manufacturing

New twin-screw extrusion: Powering the next generation of battery manufacturing

In this webinar we'll explore how novel twin extrusion is transforming battery material processing.