Scientists at IOCB Prague are uncovering new details of gene transcription. They have identified a previously unknown molecular mechanism by which the transcription of genetic information from deoxyribonucleic acid (DNA) into ribonucleic acid (RNA) can be initiated. The researchers focused on a specific class of molecules known as alarmones, which are found in cells across a wide range of organisms and whose levels often increase under conditions of cellular stress. The results were published in the prestigious scientific journal Nature Chemical Biology.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Hana Cahová, head of the Chemical Biology of Nucleic Acids research group." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Molecules of ribonucleic acid can carry a variety of chemical modifications at one end, known as caps. In eukaryotic organisms, including human cells, the best-known cap plays an important role in RNA stability and in regulating its subsequent fate. In recent years, however, it has become clear that alternative, non-canonical RNA caps also exist, although their formation and the mechanisms by which they are attached to RNA remain only partially understood. These include alarmone caps, formed by dinucleoside polyphosphate molecules, that protect cellular RNA at moments when the cell is under threat.In their study, <a target="_blank" rel="noopener noreferrer" href="https://cahova.group.uochb.cz/en">Dr. Hana Cahová</a> and colleagues examined bacterial RNA polymerase and investigated how this enzyme can initiate transcription using dinucleoside polyphosphates (NpNs) instead of the standard RNA building blocks. For the first time, the scientists described, at the atomic level, how RNA bearing an alarmone cap can be generated directly at the initiation of gene transcription. They also observed that NpNs bind through a different type of base pairing than is typically observed.The work was significantly shaped by Valentina Serianni from Hana Cahová’s team, who demonstrated the ability of dinucleoside polyphosphates to initiate gene transcription, and by Jana Škerlová, who focused on the structural analysis of RNA polymerase. Using cryogenic electron microscopy data, she showed how dinucleoside polyphosphate molecules bind within the active site of RNA polymerase – that is, the core of the enzyme where genetic information is transcribed. Together, their findings help to elucidate the processes that accompany the transcription of genetic information from DNA to RNA.Hana Cahová adds: “We’re describing something that truly occurs in cells and that we’re now able to observe directly at the level of individual molecules. This allows us to answer fundamental questions about cellular processes, such as how cells adapt to stress. RNA plays a central role in this, as it carries the cascade of information underlying any cellular response – for example, to threatening conditions caused by nutrient deprivation or temperature shock.”<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Tomáš Kouba, head of the Cryogenic Electron Microscopy core facility." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg 234w," sizes="100vw" width="2000" height="1335"><div>Cryogenic electron microscopy (cryo-EM) was central to the project. This part of the work was led by Dr. Tomáš Kouba, one of the authors of the study. “Cryogenic electron microscopy allows us to freeze biological molecules in a state very close to their natural form and then determine their three-dimensional structure. This makes it possible to look directly into the active centers of enzymes and observe their function down to the atomic level,” he explains.Last year, IOCB Prague opened a new <a target="_blank" rel="noopener noreferrer" href="https://cryoem.group.uochb.cz/en">cryo-EM center</a> that is unique within the Czech research environment. State-of-the-art cryogenic electron microscopes are housed in a specially designed building and enable the study of biological processes with exceptional structural precision.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg" alt="IOCB Prague: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: This work shows how NpnNs initiate bacterial transcription. Cryo-EM reveals how nucleobases pair with the template: one in canonical and one in reverse Watson–Crick mode, providing a structural basis for their function as non-canonical RNA caps." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg 245w," sizes="100vw" width="2000" height="1077"><blockquote><h4>The Original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41589-025-02134-5">Molecular insight into 5′ RNA capping with NpnNs by bacterial RNA polymerase</a></h4>Valentina M. Serianni, Jana Škerlová, Anna Knopp Dubánková, Anton Škríba, Hana Šváchová, Tereza Vučková, Anatolij Filimoněnko, Milan Fábry, Pavlína Řezáčová, Tomáš Kouba &amp; Hana Cahova&nbsp;Nat. Chem. Biol. 21 (2026)<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1038/s41589-025-02134-5">https://doi.org/10.1038/s41589-025-02134-5</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote><h4>Abstract</h4>RNA capped with dinucleoside polyphosphates has been discovered in bacteria and eukaryotes only recently. The likely mechanism of this specific capping involves direct incorporation of dinucleoside polyphosphates by RNA polymerase as noncanonical initiating nucleotides. However, how these compounds bind into the active site of RNA polymerase during transcription initiation is unknown. Here, we explored transcription initiation in vitro, using a series of DNA templates in combination with dinucleoside polyphosphates and model RNA polymerase from Thermus thermophilus. We observed that the transcription start site can vary on the basis of the compatibility of the specific template and dinucleoside polyphosphate. Cryo-electron microscopy structures of transcription initiation complexes with dinucleoside polyphosphates revealed that both nucleobase moieties can pair with the DNA template. The first encoded nucleotide pairs in a canonical Watson–Crick manner, whereas the second nucleobase pairs noncanonically in a reverse Watson–Crick manner. Our work provides a structural explanation of how dinucleoside polyphosphates initiate RNA transcription.</div></div>

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

In the week from February 9, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry<blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars">👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</a></h4>👉 Search and filter in the largest global database with over 5 000 GC, LC, MS and spectroscopy webinars.</blockquote><h5>1. Thermo Fisher Scientific: Process Raman – A Reliable and Versatile Tool for Downstream Process Monitoring and Control for mAb Production</h5><ul><li>Tu, 10.2.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5808">Registration</a></li></ul>The presentation highlights how process Raman spectroscopy offers several advantages over traditional in-line UV-Vis analysis for process monitoring and metabolite production control.<h5>2. Bruker: Meet Compact-Q DEER Spectrometer – Your Gateway to Quantum Innovation</h5><ul><li>Tu, 10.2.2026 17:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5757">Registration</a></li></ul>Discover how the Compact-Q DEER spectrometer enables high-fidelity qubit characterization and control, combining advanced microwave architecture, AWGs, and cryogen-free operation.<h5>3. Agilent Technologies: Novel Advancements in Trace Level Determination and Long-Term Stability of Metals in TMAH and UPW Matrices</h5><ul><li>Tu, 10.2.2026 21:30 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/3733">Registration</a></li></ul>Explore novel approaches for trace-level metal determination and long-term stability assessment in TMAH and ultrapure water matrices.<h5>4. AZoM: From First to Best – Introducing the Litesizer DIF Series</h5><ul><li>We, 11.2.2026 15:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5765">Registration</a></li></ul>Join this live webinar introducing the new Litesizer DIF series of laser diffraction particle size analyzers.<h5>5. Anton Paar: Polymer Rheology – Rotational and Transient Measurements on a Polymer Melt</h5><ul><li>We, 11.2.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5786">Registration</a></li></ul>Learn how rotational and transient viscosity measurements on rotational rheometers reveal polymer melt flow behavior, from method setup and accessories to data interpretation.<h5>6. Milestone: Practical Guidance to Improve the Journey from Sample to Heavy Metals Analysis for Environmental Labs</h5><ul><li>Th, 12.2.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5803">Registration</a></li></ul>Improve heavy metals analysis in environmental laboratories with practical tips on reagents, filtration, cleaning, and workflow optimization to enhance data quality and efficiency.<h5>7. Agilent Technologies: Moving from R&amp;D and Limited QC on a UV-Vis-NIR Instrument to Large-Scale QC Using an Autosampler</h5><ul><li>Th, 12.2.2026 20:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/2104">Registration</a></li></ul>This presentation covers key aspects of adding and using an autosampler to maximize UV-Vis-NIR QC workflows when scaling from R&amp;D to routine quality control.

Webinars LabRulezICPMS Week 07/2026

LA-ICP-MS imaging, particularly in TOF mode, provides rapid, high-resolution elemental maps of complex geological materials, but quantitative accuracy is often limited by heterogeneous mineralogy. This study introduces a workflow using UMAP for unsupervised dimensionality reduction combined with k-means clustering to segment mineral phases directly from per-pixel elemental data.Cluster compositions are matched to known minerals based on stoichiometry, allowing phase-specific normalization and reducing quantification errors by up to 60%. Validated on dawsonite-bearing sandstones, the approach enables consistent phase-resolved geochemical comparisons across depth profiles and establishes UMAP as a practical tool for accurate, interpretable multielement imaging.<blockquote><h4>The original article</h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05398">Mineral Phase-Resolved Quantification in LA-ICP-MS Imaging</a></h4>Barbara Umfahrer, Jakub Buday, Pavel Pořízka, Jozef Kaiser, Paolo S. Garofalo*, and Detlef Günther*Anal. Chem. 2026, 98, 1, 581–589<a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.analchem.5c05398">https://doi.org/10.1021/acs.analchem.5c05398</a><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/">CC-BY 4.0</a></h6></blockquote>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.Since its introduction in 1985, <a href="javascript:void(0);">(1)</a> Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) has matured into a routine technique for both qualitative and quantitative elemental analysis, finding use in diverse fields such as geology, <a href="javascript:void(0);">(2−4)</a> biology, <a href="javascript:void(0);">(5,6)</a> materials science, <a href="javascript:void(0);">(7)</a> and cultural heritage. <a href="javascript:void(0);">(8,9)</a> Especially in comparison to liquid analysis techniques, the method excels through minimal sample preparation, negligible sample destruction, and low limits of detection, which enable trace element analysis. However, besides the availability of standard reference materials, a longstanding challenge of quantitative LA-ICP-MS is the need for a suitable internal standard to account for variations in ablation rate and transport efficiency, as well as instrumental drift. <a href="javascript:void(0);">(10)</a> Developed for applications in geological matrices, this requirement was elegantly circumvented by Liu et al. <a href="javascript:void(0);">(11)</a> through 100 wt % normalization, which assumes that all detected elements form oxides summing up to 100 wt %. This approach was conceptually inspired by the summed-spectrum normalization calibration procedure introduced by Leach and Hieftje in 2000, which emphasized the use of total signal intensities for robust internal standardization. <a href="javascript:void(0);">(12)</a> The 100 wt % normalization strategy was subsequently extended to the bulk analysis of carbonates. <a href="javascript:void(0);">(13)</a>Concurrently, the advent of time-of-flight (TOF) mass analyzers and the development of fast-washout laser ablation cells <a href="javascript:void(0);">(14−16)</a> have transformed LA-ICP-MS into a powerful imaging tool, capable of generating spatial maps across a variety of sample matrices at high data acquisition rates. <a href="javascript:void(0);">(17−19)</a> Furthermore, in comparison to, e.g., X-ray fluorescence spectroscopy (XRF) or Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS), LA-ICP-MS offers a high depth resolution of approximately 0.2 μm on glass, enabling precise measurement of fine-scale structures not only laterally but also in depth. <a href="javascript:void(0);">(18)</a> However, as the volume and complexity of these elemental images have grown according to the progressive advancement of the method itself, now consisting of gigabytes of data produced within minutes, manual data interpretation has become increasingly impractical. To uncover meaningful details and patterns, researchers have applied multivariate methods such as Principal Component Analysis (PCA) and k-means clustering to reduce dimensionality and delineate distinct regions within the images. <a href="javascript:void(0);">(20−23)</a> The nonlinear dimensionality reduction technique Uniform Manifold Approximation and Projection (UMAP), <a href="javascript:void(0);">(24)</a> which supports data interpretation with its capability to capture and separate subtle local structures, has first been employed to LA-ICP-MS bulk analysis data in 2024, where it was used to classify pyrite samples and discriminate between Pb and Zn deposit types. <a href="javascript:void(0);">(25,26)</a> In combination with elemental imaging, UMAP has recently been applied to biological tissue data sets as an exploratory analysis tool, <a href="javascript:void(0);">(27)</a> further enhancing the ability to visualize and interpret complex elemental distributions.Despite these advances, no existing approach combines the unsupervised segmentation of mineral phases by UMAP with phase-specific normalization. In this study, we introduce a UMAP-driven workflow that (1) automatically segments distinct mineralogical phases within fine-grained geological matrices and (2) applies phase-specific 100 wt % normalization (e.g., oxide <a href="javascript:void(0);">(11)</a> or carbonate <a href="javascript:void(0);">(13)</a>), thereby improving quantification accuracy and enabling phase-specific quantitative interpretation of mineral distributions in complex matrices.<h4>Materials and Methods</h4><h5>LA-ICP-TOFMS Imaging</h5>LA-ICP-TOFMS analyses were performed using a 193 nm ArF excimer laser (GeoLas C, Lambda Physik, Göttingen, Germany) coupled to an ICP-TOFMS instrument (icpTOF 2R, TOFWERK AG, Thun, Switzerland). Ablation was conducted in the modified parallel flow ablation cell (MPFAC) <a href="javascript:void(0);">(16,34)</a> under a He atmosphere (99.999%, Linde Gas Schweiz AG, Dagmersellen, Switzerland) with Ar (99.996%, Linde Gas Schweiz AG) used as the carrier gas. A piezoelectrically driven xyz translational stage (1 nm resolution, SmarAct GmbH, Oldenburg, Germany) enabled precise sample positioning. Laser, stage movement, and ICP-TOFMS data acquisition were synchronized using a custom-built imaging control system. <a href="javascript:void(0);">(19)</a> The system was optimized each day based on maximum sensitivity while ensuring a 238U+/232Th+ intensity ratio of 1.0 to 1.1 on NIST SRM 610 and a 232Th16O+/232Th+ rate of below 0.5%.<h5>LIBS Imaging</h5>The LIBS analyses were performed on a Firefly system (Lightigo, Czech Republic). The laser (1064 nm, 5 mJ, pulse duration ∼10 ns, diameter 6 mm, operating at 50 Hz) was focused on the sample with a singlet lens (focal length 50 mm) to a 30 μm spot. The spatial resolution of the acquired elemental maps, with a size of about 16 mm × 26 mm, was 20 μm. Plasma radiation is collected by a multifiber configuration with a collimator and an optical fiber (400 μm core diameter), which delivered the light to several Czerny–Turner spectrometers (resolution 0.25–0.4 nm). The spectral range of the spectrometers is 180–850 nm. The radiation is collected 1.5 μs after ablation, with a gate width of 15 μs.Data processing was done with Python 3.11.8 in the Spyder environment and included background correction and per-pixel z-score normalization.<h4>Results and Discussion</h4><h5>LIBS and XRD Measurements</h5>To assess whether carbonate-based normalization <a href="javascript:void(0);">(13)</a> is warranted, first, large-scale LIBS elemental intensity maps of the samples across about a third of the thin sections were acquired. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05398#fig1">Figure 1</a> reveals the results for “Layer 2” of the Poggio del Gatto sandstone for selected elements. A complete mapping of all four thin sections can be found in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05398/suppl_file/ac5c05398_si_001.pdf">Figures S3 and S6</a> in the Supporting Information. The maps reveal that C is strongly enriched in fracture veins as well as in finer-grained domains within the matrix and correlates with Ca, indicating carbonate minerals rather than oxides. Bulk XRD analysis identifies calcite alongside quartz, plagioclase, white mica, and kaolinite. These complementary observations confirm calcite as a major phase and thus justify the need for performing the 100 wt % normalization on a carbonate basis for pixels representing calcite.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2026_98_1_581_589_Figure_1_LIBS_elemental_intensity_maps_of_the_data_set_from_Layer_2_of_the_Poggio_del_Gatto_sandstone_mounted_on_a_microscope_slide_73ada1b7b8.jpg" alt="Anal. Chem. 2026, 98, 1, 581–589: Figure 1. LIBS elemental intensity maps of the data set from “Layer 2” of the Poggio del Gatto sandstone mounted on a microscope slide, depicting calcite veins and fine-grained structures within the matrix, underlining the need for carbonate-based normalization for specific pixels. Emission lines for evaluation are shown in the corresponding subfigure title. The epoxy used to fix the thin section on the slide is visible along the margin." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2026_98_1_581_589_Figure_1_LIBS_elemental_intensity_maps_of_the_data_set_from_Layer_2_of_the_Poggio_del_Gatto_sandstone_mounted_on_a_microscope_slide_73ada1b7b8.jpg 245w," sizes="100vw" width="2088" height="414"><h5>Renormalization Based on Carbonates</h5>Applying an oxide-based normalization to carbonate samples will introduce composition-dependent biases that cannot immediately be generalized as a singular numerical value. The difference between the molecular masses of carbonate CO32– and its oxide equivalent O2– yields an intrinsic bias on the order of a factor of about two, depending on the stoichiometry. Once this data is renormalized to a total of 100 wt %, the magnitude of the error becomes highly dependent on the specific elemental composition of the sample. An exemplary calculation illustrating this effect for a representative calcite pixel is provided in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05398/suppl_file/ac5c05398_si_001.pdf">Table S2</a>, yielding a relative error of 79%. In practice, this error varies across the image according to the local phase composition. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05398#fig6">Figure 6</a> illustrates the impact of normalization approaches for layer 2 of the samples as well as the spatial distribution of the resulting relative error. The figure presents Ca and Si elemental maps in two rows, while the first three columns compare different normalization strategies: normalization based on all oxides, normalization based on all carbonates, and a pixel-wise normalization guided by mineral phase identification, as outlined in the workflow proposed in this study. The final column displays the relative error between the bulk oxide- or carbonate-based normalization and the pixel-wise, phase-informed normalization.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2026_98_1_581_589_Figure_6_Comparison_of_normalization_strategies_for_Ca_and_Si_LA_ICP_TOFMS_elemental_maps_in_Layer_2_ce3a0c1a5c.jpg" alt="Anal. Chem. 2026, 98, 1, 581–589: Figure 6. Comparison of normalization strategies for Ca and Si LA-ICP-TOFMS elemental maps in “Layer 2” of the Poggio del Gatto sandstone. Rows show Ca (top) and Si (bottom); columns compare (1) oxide-based normalization, (2) carbonate-based normalization, (3) pixel-wise, phase-informed normalization (this study), and (4) relative error between the first two and the phase-informed approach." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2026_98_1_581_589_Figure_6_Comparison_of_normalization_strategies_for_Ca_and_Si_LA_ICP_TOFMS_elemental_maps_in_Layer_2_ce3a0c1a5c.jpg 202w," sizes="100vw" width="2088" height="1622">For Ca (in this matrix primarily associated with calcite, a dominant carbonate phase in our samples), the relative error depicted quantifies the effect of applying oxide-based normalization across the entire image. This results in a systematic overestimation of the Ca concentration by approximately 60%. Conversely, for Si─in this matrix found mainly in quartz and various plagioclase phases─the error is shown for applying carbonate-based normalization across an oxidic matrix. In such cases, the Si concentrations are underestimated by roughly 10% to 40%, depending on the mineral phase.These findings highlight that using a single normalization scheme across heterogeneous samples introduces substantial quantification errors. To mitigate this, the pixel-wise phase segmentation enabled by the proposed UMAP-based workflow offers a significant advantage, especially in fine-grained matrices. In short, phase-aware, pixel-wise normalization combines the strengths of both normalization approaches and proves to be highly beneficial.<h4>Conclusion</h4>This study demonstrates that phase-specific normalization, guided by unsupervised phase segmentation of LA-ICP-MS images, can substantially improve the accuracy of elemental quantification in fine-grained geological matrices. Rather than relying on a single global assumption (e.g., all oxides or all carbonates), the workflow adapts normalization to the actual mineralogy, minimizing systematic errors and enabling phase-resolved geochemical interpretation.The segmentation step, based on UMAP embedding and k-means clustering, is fully unsupervised. However, the subsequent matching of clusters to specific minerals still relies on a limited set of preidentified stoichiometries and is therefore not yet fully unsupervised. Expansion to larger stoichiometric databases could help overcome this limitation and move toward automated mineral classification. A key challenge remains the similarity of cation ratios in certain mineral groups, which may still require complementary data to ensure robust assignments.Overall, beyond the specific case of the Poggio del Gatto sandstone presented in this study, this work provides a framework for quantitative elemental imaging of complex geological samples and is readily transferable to other contexts that require spatially resolved composition-aware normalization. This contribution adds a practical implementation to a growing literature that already uses multivariate statistics to unlock the immense information depth of LA-ICP-TOFMS.

Mineral Phase-Resolved Quantification in LA-ICP-MS Imaging

Article

Webinars

Scientific article

Science and research

Video

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Agilent Technologies

Bruker

Thermo Fisher Scientific

Shimadzu Corporation

Fourier transform infrared (FTIR) spectroscopy is a well-established and powerful instrumental technique, with FTIR analysis providing detailed information on the composition of various samples. Developing models for FTIR quantitative analysis is simple using Agilent Cary 630 FTIR spectrometers and MicroLab FTIR software.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technologies: Meet a Versatile Agilent Cary 630 FTIR

Meet a Versatile Agilent Cary 630 FTIR

Developing models for FTIR quantitative analysis is simple using Agilent Cary 630 FTIR spectrometers and MicroLab FTIR software.

Cleaning verification is a regulatory requirement for the pharmaceutical and biopharmaceutical industry to produce quality medicines and ensures that there is no potentially harmful cross-contamination. FTIR spectroscopy provide a practical and economical solution for contamination detection and cleaning verification.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilnt Technologies: Cleaning Verification with FTIR Spectroscopy

Cleaning Verification with FTIR Spectroscopy

FTIR spectroscopy provide a practical and economical solution for contamination detection and cleaning verification.

Review of the potential use of FTIR technology for the identification and quantification of sugars in alcoholic beverages and of sugars and sweeteners in food industry products such as juices and soft drinks, including examples of the use of concentration prediction models.
<blockquote>
Presenter: Rogelio García Juárez (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Rogelio García has a Bachelor’s degree in Pharmaceutical Chemistry from the University National of Mexico and a Master´s degree in Environmental Engineering from the National Polytechnic Institute. He worked in environmental laboratories in the development of methods and applications in water, soil, and air and method design for the pharmaceutical and food industry. He also worked in the implementation of quality management systems in laboratories to obtain accreditation in the 17025 standard, validation process, and analysis of the uncertainty of the method. In 2015, he joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, FTIR, and Raman techniques, at Agilent México and Latin America.
</blockquote>

Agilent Technologies: Use of FTIR Technology for the analysis of Sugars and Sweeteners in alcoholic Beverages and in the Food Industry

Use of FTIR Technology for the analysis of Sugars and Sweeteners in alcoholic Beverages and in the Food Industry

Use FTIR technology for the identification and quantification of sugars in alcoholic beverages and of sugars and sweeteners in food industry product.

FTIR Technology for the analysis of Sugars and Sweeteners

Discover even more analysis you can perform with the Cary 60 UV-Vis in the Environmental area.
<blockquote>
Presenter: Luciana Terra (Application Scientist, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Luciana Terra has a Bachelor’s degree in Industrial Chemistry from the Federal University of Alfenas (Unifal-MG) as well as a Ph.D. in Analytical Chemistry, on Chemometrics, from the State University of Campinas (Unicamp), where she developed work focused on petroleum quality and derivatives using high-resolution Mass Spectrometry, NIR, and chemometrics methodologies. As part of her Ph.D., she also worked at the University of Calgary in Canada. While completing her Master’s Degree at Unicamp, Luciana developed a new methodology for drug polymorphism detection using NIR imaging and chemometrics tools for quality assurance in the pharmaceutical industry. In 2019, she joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, Fluorescence, IR, and Raman techniques, at Agilent Technologies, in Brazil.
</blockquote>

Analysis of aqueous Environmental samples using UV-Vis instrumentation

Discover even more analysis you can perform with the Cary 60 UV-Vis in the Environmental area.

Analysis of aqueous Environmental samples using UV-Vis

The Cary 60 UV-Vis spectrophotometer can be used for the application of contaminant analysis in drinking water and waste water.
Join me as we explore discuss various accessories simplifying the creation of calibration curves for different key analytes such as cyanides, phenols, detergents, and hexavalent chromium.
<blockquote>
Presenter: Rogelio García Juárez (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
Rogelio García has a Bachelor’s degree in Pharmaceutical Chemistry from the University National of Mexico and a Master´s degree in Environmental Engineering from the National Polytechnic Institute. He worked in environmental laboratories in the development of methods and applications in water, soil, and air and method design for the pharmaceutical and food industry. He also worked in the implementation of quality management systems in laboratories to obtain accreditation in the 17025 standard, validation process, and analysis of the uncertainty of the method. In 2015, he joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, FTIR, and Raman techniques, at Agilent México and Latin America.

Agilent Technologies: Analysis of contaminants in water and waste water by UV-Vis

Analysis of contaminants in water and waste water by UV-Vis

Various accessories simplifying the creation of calibration curves for different key analytes such as cyanides, phenols, detergents, and hexavalent chromium.

In this application, we will review a fast, easy and reliable analysis method of THCA and CBDA decarboxylation in cannabis oil and flower samples by infrared spectroscopy.
<blockquote>
Presenter: Rogelio García Juárez (Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Rogelio García has a Bachelor’s degree in Pharmaceutical Chemistry from the University National of Mexico and a Master´s degree in Environmental Engineering from the National Polytechnic Institute. He worked in environmental laboratories in the development of methods and applications in water, soil, and air and method design for the pharmaceutical and food industry. He also worked in the implementation of quality management systems in laboratories to obtain accreditation in the 17025 standard, validation process, and analysis of the uncertainty of the method. In 2015, he joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, FTIR, and Raman techniques, at Agilent México and Latin America.
</blockquote>

Agilent Technologies: Cannabinoid analysis by FTIR

Cannabinoid analysis by FTIR

Fast, easy and reliable analysis method of THCA and CBDA decarboxylation in cannabis oil and flower samples by infrared spectroscopy.

The widespread challenge posed by microplastics is a pressing issue that necessitates innovative solutions.
In this Digital Classrooms session, explore how Shimadzu&#39;s state-of-the-art analytical and measuring instruments are leading the way in microplastics research, analysis, and characterization.
In the first part of the session, we will explore the analysis of microplastics in oceans and other environmental waters using Fourier-Transform Infrared Spectroscopy (FTIR) and Infrared/Raman microscope. Learn how these tools, combined with our innovative automated sample preparation device and the resourceful degraded plastics libraries, can accurately identify and characterize microplastics, contributing to a more profound comprehension of their prevalence in aquatic ecosystems.
In the second part, we&#39;ll unveil an automated workflow leveraging Pyrolysis-Gas Chromatography/Mass Spectrometry (Pyrolysis-GCMS). This cutting-edge approach streamlines the identification and quantitative analysis of microplastics in environmental samples, increasing efficiency while maintaining accuracy.
Join us to explore how Shimadzu&#39;s solutions are meeting the needs of today – Be part of the change and understand how we can overcome this environmental challenge together.
Learning Objectives:
<ul>
<li>Explore Shimadzu&#39;s analytical tools for microplastics research and analysis
</li>
<li>Understand use of FTIR and Infrared/Raman microscopy in microplastics identification
</li>
<li>Learn how to streamline identification and quantification of microplastics using Pyrolysis-GCMS
</li>
<li>Discover how automated workflows enhance efficiency in microplastics analysis in environmental samples
</li>
</ul>
<blockquote>
Presenter: Pravin Konde, PhD (Senior Product Specialist, Shimadzu (Asia Pacific) Pte Ltd)
</blockquote>
<blockquote>
Pravin Konde is a Senior Product Specialist (for Spectroscopy &amp; TOC) at Shimadzu Asia Pacific Singapore. He has about 15 years of industry experience of which about 12 years in analytical instruments with expertise in trace element analysis and spectroscopy applications. He is engaged primarily in technical support to regional sales teams and customers. Prior to joining industry, he has done his PhD in Chemistry from Institute of Chemical Technology (formerly UDCT), Mumbai, India.
</blockquote>
<blockquote>
Presenter: Chua Chun Kiang, PhD (Senior Product Specialist (GCMS), Shimadzu (Asia Pacific) Pte Ltd)
</blockquote>
<blockquote>
Chun Kiang received his Ph.D. in Chemistry from Nanyang Technological University, Singapore. He has been at Shimadzu Asia Pacific since 2019. He has more than 10 years of experience in research and training across multiple disciplines including mass spectrometry, gas and liquid chromatography, nanomaterials, electrochemistry, and organic chemistry. He enjoys sharing technical knowledge and helping to identify solutions for challenges in chemistry.
</blockquote>

Shimadzu: Fast-Track Microplastics Research: Advanced, Automated Workflows For Environmental Analysis

Fast-Track Microplastics Research: Advanced, Automated Workflows For Environmental Analysis

Explore how Shimadzu's state-of-the-art analytical and measuring instruments are leading the way in microplastics research, analysis, and characterization.

Microplastics: Workflows For Environmental Analysis

LUMOS II ushers in a new era in FT-IR Microscopy.<blockquote>Presenter: &nbsp;Dr. Tom Tague (Applications Manager and Chair of the Safety Committee Bruker Corporation)<div>Dr. Tom Tague is the Applications Manager (FTIR and Raman products) and Chair of the Safety Committee for Bruker Corporation. He is also a member of the Visiting Advisory Committee of the Metropolitan Museum of Art in New York and the Advisory Board of Amplified Sciences. Dr. Tague received his Ph.D. from the University of Utah in Physical Chemistry and his B.S. in Chemistry, from the University of Texas at San Antonio. He conducted his postdoctoral research at the University of Virginia working with professor Lester Andrews. He is a member of the American Chemical Society, the Society for Applied Spectroscopy, the American Physical Society, and the Optical Society of America. Dr. Tague is active in developing new methods and instrumentation with the goal of improving the sensitivity and detection limits of spectroscopy related applications. Dr. Tague has more than 80 publications and 5 patents.</div></blockquote>

Bruker: The State-of-the-Art in Infrared Microscopy

The State-of-the-Art in Infrared Microscopy

LUMOS II ushers in a new era in FT-IR Microscopy.

<div><div container-id="cq-colctrl-lt0" comp-id="A1"><div>We are pleased to invite you to upcoming Webinar on "Exploring analytical methods &amp; applications in polymer science." This event is free to attend will cover key techniques such as Rheology, FTIR, NIR, Process Raman, XRF, XRD, and TGA, highlighting their roles in understanding polymer properties and optimizing processes.Join to learn how these methods can enhance material design, quality control, and performance. Gain insights into the latest advancements and applications in polymer science.<h3>Webinar Schedule</h3><h4>Day 2: Novel applications of material characterization in polymer industry</h4>Wednesday, October 1, 2025, | 10:00-11:00 UTC+1&nbsp;<h5>Session 1: Plastics/Polymers sorting using vibrational spectroscopy&nbsp;</h5><ul><li>Speaker: Dr. Hilmar Geitlinger</li></ul>Dr. Hilmar Geitlinger will kick off the day with a presentation on advanced methods for sorting plastics and polymers. This session will explore the latest technologies used to efficiently and accurately sort different types of polymers, which is crucial for recycling and manufacturing processes. Dr. Geitlinger will discuss the principles behind these sorting techniques and their practical applications in industry.<h5>Session 2: Multilayer/Inclusions in polymers and food packaging using IR/Raman microscopy</h5><ul><li>Speaker: Dr. Alexander Boehm</li></ul>Following Dr. Geitlinger, Dr. Alexander Boehm will present on the characterization of multilayer structures and inclusions within polymers. This session will cover the challenges and solutions associated with analyzing complex polymer systems that contain multiple layers or embedded inclusions. Dr. Boehm will highlight the importance of these analyses in ensuring the quality and performance of polymer products.<h5>Session 3: Marine Waste Extrusion</h5><ul><li>Speaker: Dr. Annika Voelp</li></ul>The final session of the day will be led by Dr. Annika Voelp, who will discuss the extrusion of marine waste into usable polymer materials. This innovative approach addresses the growing issue of marine pollution by converting waste into valuable resources. Dr. Voelp will share insights into the extrusion process, the types of marine waste that can be utilized, and the potential applications of the resulting materials.We look forward to your participation and hope you find these sessions informative and inspiring. Let's embark on this journey to explore the cutting-edge advancements in material characterization within the polymer industry.<blockquote>Presenter: Geitlinger, Hilmar (Application Specialist, Spectroscopy)Presenter: Boehm, Alexander (Application Specialist, Spectroscopy)Presenter: Voelp, Annika (Application Specialist, Production Process and Analytics)</blockquote></div></div></div>

Thermo Fisher Scientific: Advanced analytical methods in polymer science webinar series

Advanced analytical methods in polymer science, Part 2

Join Day 2 of our polymer science webinar to explore plastic sorting, multilayer polymer analysis, and marine waste extrusion with spectroscopy experts.

Find out how the Cary 630 FTIR with ATR enables the identification of Forensic samples quickly and accurately.<blockquote>Presenter:&nbsp; Luciana Terra (Application Scientist, Molecular Spectroscopy, Agilent Technologies, Inc.)Luciana Terra has a Bachelor’s degree in Industrial Chemistry from the Federal University of Alfenas (Unifal-MG) as well as a Ph.D. in Analytical Chemistry, on Chemometrics, from the State University of Campinas (Unicamp), where she developed work focused on petroleum quality and derivatives using high-resolution Mass Spectrometry, NIR, and chemometrics methodologies. As part of her Ph.D., she also worked at the University of Calgary in Canada. While completing her Master’s Degree at Unicamp, Luciana developed a new methodology for drug polymorphism detection using NIR imaging and chemometrics tools for quality assurance in the pharmaceutical industry. In 2019, she joined Agilent Technologies as an Application Scientist for Molecular Spectroscopy in UV-Vis, Fluorescence, IR, and Raman techniques, at Agilent Technologies, in Brazil.</blockquote>

Agilent Technologies: Forensic Identification using Infrared Spectroscopy

Forensic Identification using Infrared Spectroscopy

Find out how the Cary 630 FTIR with ATR enables the identification of Forensic samples quickly and accurately.