<div><div><p><strong>Researchers led by </strong><a target="_blank" rel="noopener noreferrer" href="https://kudova.group.uochb.cz/en"><strong>Eva Kudová</strong></a><strong> from IOCB Prague and Jitka Viktorová from UCT Prague have identified new androstane-based steroid derivatives that can significantly improve the effectiveness of existing antibiotics against multidrug-resistant </strong><i><strong>Staphylococcus aureus</strong></i><strong>.</strong></p></div></div><div><p>The team screened dozens of natural steroidal hormones and synthetic derivatives to see whether they could block bacterial efflux pumps – mechanisms that bacteria use to eject antibiotics and survive treatment. Two compounds emerged as particularly promising: they inhibited efflux pumps and lowered the effective doses of antibiotics such as ciprofloxacin and erythromycin.</p><p>Further analysis showed that one of the compounds also suppressed genes linked to bacterial virulence. Another key finding is that the most active molecules are non-toxic to human immune cells and showed no detectable endocrine activity, suggesting a favorable safety profile.</p><p>These findings support the idea that rationally designed steroid-based molecules could act as antibiotic adjuvants, helping existing drugs overcome bacterial resistance.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/IOCB_Prague_Steroidal_hormones_and_neurosteroids_novel_therapeutic_strategies_in_bacterial_infections_8e5d2a7b48.jpg" alt="IOCB Prague: Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_IOCB_Prague_Steroidal_hormones_and_neurosteroids_novel_therapeutic_strategies_in_bacterial_infections_8e5d2a7b48.jpg 222w," sizes="100vw" width="1258" height="886"></p><blockquote><h4><strong>Original Article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.sciencedirect.com/science/article/pii/S0223523426001613?via%3Dihub"><strong>Steroidal hormones and neurosteroids - novel therapeutic strategies in bacterial infections: Design, synthesis, and biological evaluation</strong></a></h4><p>Daniela Brdová, Bára Křížkovská, Jan Špaček, Zdeněk Míchal, Eva Jablonská, Ondřej Strnad, Hana Chodounská, Eszter Szánti-Pintér, Marina Morozovová, Václav Hanžl, Jan Tkadlec, Martijn Riool, Jan Lipov, Jitka Viktorová, Eva Kudová&nbsp;</p><p><i><strong>Eur. J. Med. Chem., 2026, 308, 118716</strong></i></p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1016/j.ejmech.2026.118716">https://doi.org/10.1016/j.ejmech.2026.118716</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><h4><strong>Abstract</strong></h4><p>The global rise of antibiotic resistance necessitates novel therapeutic strategies for infectious diseases. Inhibition of bacterial efflux pumps, which contribute to multidrug resistance, represents a promising approach to restore or even increase the efficacy of existing antibiotics. Using fluorescence-based ethidium bromide accumulation, broth microdilution, and checkerboard assays, we evaluated 26 endogenous steroidal hormones and neurosteroids, along with 30 synthetic derivatives, for their ability to enhance antibiotic susceptibility in multidrug-resistant <i>Staphylococcus aureus</i>. Structure-activity relationship analysis identified compounds <strong>13</strong> and <strong>16</strong> as lead candidates, exhibiting strong efflux pump inhibition and marked reductions in the minimum inhibitory concentrations of ciprofloxacin and erythromycin. Both compounds showed additive effects in checkerboard assays. Modifications at C-3 (polar substitution) and C-17 (3α,5β-stereochemistry and nonpolar substitution) were essential for potent efflux inhibition and sensitization, although these modifications were not additive when combined. Transcriptome analysis further revealed that compound <strong>13</strong> significantly downregulated <i>S. aureus</i> virulence-associated genes when administered alone or in combination with antibiotics. Cytotoxicity assessment in human peripheral blood mononuclear cells and receptor transactivation assays for estrogen, androgen, and progesterone receptors indicated that the most active derivatives were non-toxic and lacked detectable endocrine activity, suggesting a favorable safety profile. Overall, these findings support the concept that rationally designed andostane-based steroidal scaffolds can function as competitive bacterial efflux pump inhibitors and serve as potential antibiotic adjuvants to mitigate efflux-mediated resistance.</p><h4><strong>Instrumentation</strong></h4><h5><strong>Structural characterization</strong></h5><ul><li><strong>AVANCE III 400 MHz NMR spectrometer</strong> (Bruker)</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=3&amp;search=LTQ+Orbitrap+XL"><strong>LTQ Orbitrap XL HRMS</strong></a> (Thermo Fisher Scientific, ESI)</li></ul></div>

Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections

<p><strong>Wiley, a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation and learning, today announced the release of additional data to its IR and Raman spectral libraries, significantly broadening compound coverage, including materials, polymers, minerals, and others.</strong></p><p>This latest release includes the first installment of Raman spectra from <strong>Wiley's collaboration with the American Museum of Natural History (AMNH), announced earlier this spring</strong>, drawing from one of the world's most important mineral collections.</p><p>“<i>Researchers depend on reference data as a foundation for sound scientific decisions</i>,” said Graeme Whitley, senior director, data science solutions at Wiley. “<i>Continuous updates ensure scientists always have the most current, reliable reference libraries at their fingertips, helping them work faster and make confident decisions when it matters most.</i>”</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Wiley_Wiley_expands_its_trusted_IR_and_Raman_spectral_library_collections_helping_analytical_labs_make_faster_more_confident_decisions_1a54aaad3a.jpg" alt="Wiley: Wiley expands its trusted IR and Raman spectral library collections—helping analytical labs make faster, more confident decisions" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Wiley_Wiley_expands_its_trusted_IR_and_Raman_spectral_library_collections_helping_analytical_labs_make_faster_more_confident_decisions_1a54aaad3a.jpg 245w," sizes="100vw" width="1600" height="856"></p><h4><strong>Summary of updates:</strong></h4><h5><strong>KnowItAll Raman Spectral Library Collection</strong></h5><ul><li><strong>Added: </strong>1,213 spectra</li><li><strong>Now contains: </strong>29K+ spectra</li></ul><p><strong>2 new databases:</strong></p><ul><li>Raman – American Museum of Natural History Minerals – Wiley – 198 spectra</li><li>Raman – Microbiology – 71 spectra</li></ul><p><strong>Spectra added to databases:</strong></p><ul><li>Raman – Consumer Goods &amp; Food-Related Compounds – +104</li><li>Raman – Drugs – +128</li><li>Raman – Materials – +132</li><li>Raman – Minerals – +233</li><li>Raman – Polymers – +5</li><li>Raman – Pigments &amp; Dyes – +342</li></ul><h5><strong>KnowItAll IR Spectral Library Collection</strong></h5><ul><li><strong>Added: </strong>949 spectra</li><li><strong>Now contains: </strong>344K+ spectra</li></ul><p><strong>7 new databases:</strong></p><ul><li>ATR-IR – Clinical – 364 spectra</li><li>ATR-IR – Materials – 10 spectra</li><li>ATR-IR – Pigments &amp; Dyes – 420 spectra</li><li>ATR-IR – Polymers – 21 spectra</li><li>IR – Clinical – 20 spectra</li><li>IR – Materials – 17 spectra</li><li>IR – Microbiology – 75 spectra</li></ul><p><strong>Spectra added to databases:</strong></p><ul><li>IR – Minerals – +5</li><li>IR – Polymers – +17</li></ul><p>Spectral library subscribers automatically gain access to new data, ensuring labs always have the most current, reliable reference libraries to improve analysis, reduce errors, and increase productivity.</p><ul><li>Learn more at: <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/spectral-databases/"><strong>www.sciencesolutions.wiley.com/spectral-databases</strong></a></li><li>Existing subscribers can access step-by-step guidance on updating their KnowItAll databases at <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/how-to-update-knowitall-databases"><strong>https://sciencesolutions.wiley.com/how-to-update-knowitall-databases</strong></a></li></ul><h5><strong>Wiley Spectral Databases</strong></h5><p>Wiley's spectral databases are consistently evolving to meet today's research demands, covering multiple spectral techniques across a wide range of applications including polymers, materials, environmental, forensics, toxicology, pharmaceutical, biotech, automotive, aerospace, food, cosmetics, and more. Built on rigorous quality protocols, Wiley delivers industry-leading spectral data and intelligent tools to accelerate analysis and deliver deeper insights — making it the authoritative, trusted source that analytical labs worldwide rely on.&nbsp;</p><h5><strong>About Wiley</strong></h5><p>Wiley (NYSE: WLY) is a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation, and learning. With more than 200 years at the center of the scholarly ecosystem, Wiley combines trusted publishing heritage with AI-powered platforms to transform how knowledge is discovered, accessed, and applied. From individual researchers and students to Fortune 500 R&amp;D teams, Wiley enables the transformation of scientific breakthroughs into real-world impact. From knowledge to impact—Wiley is redefining what's possible in science and learning.&nbsp;</p>

Wiley expands its trusted IR and Raman spectral library collections

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 4th May 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by<strong> KNAUER, Shimadzu, </strong>and <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. KNAUER: Analysis of HPLC fractions by Benchtop NMR</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/knauer_hplc_benchtop_nmr_web_638c60e13c.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Preparative HPLC is essential for isolating compounds and removing impurities in pharmaceutical and chemical industries. Non-destructive, fast analysis is preferred to maintain yield and enable at-line monitoring, avoiding lengthy sample preparation. Recent advancements in benchtop NMR spectrometers (up to 90 MHz) allow quick analysis without deuterated solvents. In this proof-of-concept study we purified a pharmaceutical sample via HPLC and confirmed its identity using benchtop NMR. Fractions (0.7–4.4 mM) were analyzed without preparation, using only 300 µL per sample, ensuring rapid batch control with no product loss. This study demonstrates the seamless integration of HPLC and benchtop NMR.</p><h4><strong>Experimental</strong></h4><h5><strong>Preparative HPLC Method</strong></h5><p>Eluent 20:80 Ethanol/water, isocratic mode, flow rate 12.5 ml/min, detection UV254 nm 2 Hz, 500 µl stacked injection, automated fractionation with threshold function, column temperature ambient, Column Eurospher II 100-10 C18 150x20 mm&nbsp;</p><h5><strong>Analytical HPLC Method</strong></h5><p>Eluent 20:80 Ethanol /water + 0.1% formic acid, isocratic mode, flow rate 1 ml/min, detection UV254 nm 10 Hz, 5 µl partial loop injection, column temperature 25 °C, Column <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1633"><strong>Eurospher II 100-5 C18</strong></a> 150x4 mm&nbsp;</p><h5><strong>NMR Method&nbsp;</strong></h5><p>NMR spectra were acquired on a <strong>Magritek Multi-X Ultra 80 MHz benchtop NMR system</strong> using an adapted WET sequence for solvent suppression. 32 scans were acquired with a repetition time of 15s. WET parameters were adjusted for each sample to yield optimal suppression for all solvent signals. Pooled HPLC fractions were analysed directly without addition of deuterated solvents or other sample preparation.</p><h4><strong>Conclusion</strong></h4><p>This proof-of-concept study successfully shows that HPLC and benchtop NMR can be used together easily. Samples can be analyzed non-destructively within minutes and without any further preparation due to highly efficient suppression of multiple solvent signals. Compounds can be identified without the need of reference standards. This study shows that NMR can provide a valid compatible alternative detector for HPLC fraction analysis.</p><h3><strong>2. Shimadzu: DIC Analysis in High-Speed Tensile Test of CFRP</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00854_en_fb6c68b858.pdf"><strong>Full PDF for download</strong></a></li></ul><h4><strong>User Benefits</strong></h4><ul><li>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X3"><strong>HPV-X3</strong></a> is suitable for observation of fracture of brittle materials such as CFRP because it has a maximum recording speed (framerate) of 20 Mfps.&nbsp;</li><li>The HPV-X3 provides improved DIC analysis performance, as its resolution is 3 times higher than that of the conventional highspeed video camera.</li><li>The HITS-TX impact testing machine enables testing at a maximum speed of 20 m/s</li></ul><p>Carbon fiber reinforced plastic (CFRP) is a material with particularly high specific strength, even among composite materials, and used in various applications such as transport aircraft, taking advantage of its excellent mechanical properties. Because CFRP consists of carbon fibers and resin, it shows complex fracture behavior, and brittle fracture progresses from damage as the point of origin. Since fracture proceeds instantaneously, a high-speed video camera with a high recording speed is necessary when observing fracture of CFRP. One method for measuring strain in a high-speed tensile test is Digital Image Correlation (DIC), which visualizes the distribution of strain at the specimen surface by comparing a random pattern on the specimen surface before and after deformation. Thus, a high-speed video camera with a high resolution is also necessary in order to improve the DIC performance.&nbsp;</p><p>Newly-developed <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=HPV-X3"><strong>Hyper Vision HPV-X3 high-speed video camera</strong></a> is extremely well-suited to DIC analysis of CFRP, as its recording speed is 2 timesfaster and itsresolution is 3 times higher than the conventional HPV-X2. In this experiment, a high-speed tensile test of CFRP was conducted using a HITS-TX high-speed tensile testing machine. The condition of the test was observed with the new HPV-X3, and the strain distribution of the CFRP test piece was clarified by a DIC analysis of the recorded images.</p><h4><strong>Test Piece and Test Instruments</strong></h4><p>A CFRP quasi-isotropic laminate was used as the test piece. Aluminum foil was glued to the back side of the test piece, and the timing when the electrical conduction of the aluminum foil was interrupted by fracture of the test piece was used as the trigger for video recording. The HITS-TX was used in the highspeed tensile test. The HPV-X3 was used in fracture observation, and for comparison, the fracture process was also recorded with the conventional HPV-X2 camera. Fig. 1 shows the condition of the test, and Table 1 and Table 2 show the equipment composition and test conditions, respectively.</p><h4><strong>DIC Analysis Results in High-Speed Tensile Test</strong></h4><p>Fig. 3 shows the DIC analysis results in the high-speed tensile test. The color bar was set to display the color purple at around 0 % strain and red at around 2 % strain. Fig. 3 (1) is an image at the start of the test. After the test started, strain in the 45˚ direction concentrated from the lower left to the right central area, as can be seen in Fig. 3 (2). Then, as the test progressed, a condition of increasing strain in the initial area of strain concentration can be seen in Fig. 3 (3) to (9). A crack occurs in Fig. 3 (10), and strain decreases in the crack area. Following this, the test piece fractured completely in Fig. 3 (11) and (12), and a decrease in the strain in the area around the crack could be observed.</p><h4><strong>Conclusion</strong></h4><p>A high-speed tensile test of CFRP was conducted using a HITSTX high-speed tensile testing machine and the newlydeveloped HPV-X3 high-speed video camera, and the strain distribution at the time of test piece fracture was visualized by a DIC analysis. Because the HPV-X3 offers a 3 times higher resolution and a 2 times faster recording speed than the conventional device, it is a suitable high-speed video camera for fracture observation and DIC analysis in impact tests of brittle materials such as CFRP. The measurement system introduced in this Application News article is a useful tool for the development of composite materials.</p><h3><strong>3. Thermo Fisher Scientific: Polymer analysis using femtosecond-laser-ablation depth profiling</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/xps_depth_profiling_polymer_analysis_appnote_c731e2e7e0.pdf"><strong>Full PDF for download</strong></a></li></ul><p>X-ray photoelectron spectroscopy (XPS) is an essential polymer characterization technique that can identify not just the elemental composition but also the chemical state of polymer samples. This allows the chemical bonding environment to be deduced and, as a result, the polymer species can be identified. This can all be achieved with minimal sample preparation thanks to the built-in charge-compensation systems found in XPS instruments, which simplify the analysis of insulating samples.&nbsp;</p><p>The introduction of gas cluster ion sources (GCIS), such as the Thermo Scientific™ MAGCIS Dual Mode Ion Source, marked a major step forward in polymer analysis. Unlike monatomic ion beams, GCIS are able to clean surface contamination, and etch away layers of sample material, without damaging the underlying chemistry of organic samples such as polymers. As a result, GCIS has allowed chemical-damage-free analysis to reach micrometers below the sample surface. This depth of analysis can be highly time consuming, however, and total experimental times can range from multiple hours to days.&nbsp;</p><p>The addition of femtosecond-laser-ablation (fs-LA) technology is alleviating this, allowing for XPS spectra to be collected from a depth of tens of µm into a sample in a matter of minutes. This is because the laser ablation occurs on the femtosecond timescale (i.e., nearly instantaneously), effectively eliminating the material removal time of the depth profile. Additionally, unlike other material removal techniques such as atomic ion beam impact (where a collision cascade effect is induced to remove surface material) fs-LA is capable of removing material without chemical damage due to the ultrashort columbic explosion process used to eject the material. The resulting profile is therefore representative of the actual sample chemistry.</p><h4><strong>Paint layer analysis&nbsp;</strong></h4><p>In traditional ion-beam depth profiling, analytical depths are generally limited to several hundred nanometers, up to a micrometer. This means that it is extremely difficult to analyze the interfaces between multiple micrometer-thick layers in a sample without the use of additional techniques such as ultralow-angle microtome (ULAM) sectioning.¹ The introduction of fs-LA technology, however, allows micrometers of material to be removed rapidly, enabling the characterization of layered samples.&nbsp;</p><p>As an example, a multi-layer paint specimen (provided by the University of Surrey, UK) was depth profiled using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2206"><strong>Thermo Scientific™ Hypulse™ Surface Analysis System</strong></a>. The sample consists of an aluminum substrate coated with a 5 µm layer of polyurethane primer followed by a 25 µm PMMA/PVdF topcoat.</p><p>The depth profile was generated using a 1,030 nm laser with an energy of 250 µJ for ablation, along with a 30 µm X-ray spot size for data collection. XPS spectra were collected after each ablation cycle to obtain an atomic concentration plot through both paint layers into the substrate material (Figure 2).&nbsp;</p><p>5 distinct regions throughout the analyzed depth can be seen. The top surface of the sample consists of an adventitious layer of carbon contamination, which is commonly found on samples exposed to air. The second layer is the 25 µm PVdF/PMMA topcoat, and the third layer is the PU primer. Between the primer and the final aluminum substrate layer, a clear increase in adventitious carbon is observed, similar to the signal seen at the top sample surface. This suggests residual carbon contamination was present on the substrate before the paint layers were applied.&nbsp;</p><p>It would take hours to produce the XPS depth profile shown in Figure 2 using traditional ion beam approaches. Even with the use of a monatomic beam with a high energy per atom, the length of the analysis could still be just as long, depending on the sample material, and would sacrifice the chemistry of any organic/polymeric materials. The combination of fs-LA depth profiling and snapshot XPS acquisition, meanwhile, can reduce the experimental time to less than 20 minutes without inducing any chemical damage to the sample surface.</p><h4><strong>Summary&nbsp;</strong></h4><p>One of the most critical aspects of successful polymer XPS depth profiling is the preservation of the sample chemistry during material removal. Additionally, experiment time can be a significant limiting factor, and thicker samples could lead to reduced time for repeat experiments. The femtosecond laser ablation capabilities of the Hypulse Surface Analysis System provide fast, efficient, and chemical-damage-free material removal from a sample surface, enabling analysis multiple micrometers into a sample. This means that hidden sample interfaces, that were largely inaccessible before, can now be analyzed easily and efficiently</p>

News from LabRulezICPMS Library - Week 19, 2026

Article

Product

Application

Video

Science and research

Software

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

For over 200 years we have been helping people and organizations develop the skills and knowledge they need to succeed.
We develop digital education, learning, assessment, and certification solutions to help universities, businesses, and individuals move between education and employment and achieve their ambitions.

Wiley

Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer

Perform both basic and complex analyses with the Thermo Scientific™ GENESYS™ 30 Visible Spectrophotometer, an intuitive, reliable solution for education or in the lab.

<h3><strong>Designed for Users, Designed for Results</strong></h3><p><strong>The Thermo Scientific ™ GENESYS ™ 30 is the most thoughtfully designed spectrophotometer available today. Its high resolution color display, large sample compartment, and data export options meet modern expectations for students, educators and lab technicians. The GENESYS 30 blends the simplicity to satisfy novice students with the capabilities that labs need for accurate quantitative analysis.</strong></p><h4><strong>System Benefits:</strong></h4><ul><li>Large sample compartment with front access simplifies sample handling</li><li>High resolution color display</li><li>Outstanding durability in challenging environments thanks to:</li><li>Waterproof screen</li><li>Sealed, rubberized keypad</li><li>Removable, washable sample compartment</li><li>Sloping surfaces that shed spills</li><li>Chemical resistant PC-ABS covers</li><li>3A linear measurement range for concentrated solutions</li><li>Multi-point quant offers higher measurement confidence</li><li>Traditional monochromator paired with advanced electronics delivers outstanding stability</li><li>Scan mode for spectral analysis and interpretation</li><li>Data any way you want it - excellent snap-on thermal printer or USB data export</li><li>Expanded capabilities with optional VISIONlite software</li><li>2-year warranty</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_4_4442fcccc5.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_4_4442fcccc5.jpg 195w," sizes="100vw" width="2103" height="1685"></p><h3><strong>Modern Power meets Traditional Simplicity</strong></h3><h4><strong>Live Display and Concentration Mode</strong></h4><p>Replicate the familiar display of absorbance or transmittance, and single standard concentration measurements of prior generation instruments in the GENESYS 30 Live Display mode. All your parameters are set and kept in view on a single screen as the calculated concentration updates every two seconds.</p><h4><strong>Fixed Mode</strong></h4><p>Apply a factor to an absorbance measurement at one wavelength, or measure at two wavelengths with two factors and perform addition, subtraction or division of the values. Display results for up ten samples then print, save or clear your data before going on to the next sample series.</p><h4><strong>Quantitative Analysis with up to Six Standards</strong></h4><p>Go beyond the basic spectrophotometer by recording and storing up to six standards to calibrate your method. Choose a linear fit with an intercept or forced through zero. Name and save your method on the instrument or back it up to a USB memory device. All data are recorded with an index number (S1 – S10) and a time stamp. The result table accommodates up to ten samples for you to print or save before going on to the next sample series or analysis.</p><h4><strong>Go negative!</strong></h4><p>Some methods call for blanking the instrument on a dark standard and reading absorbance in the negative range. Most single beam instruments cannot measure below -0.3A. GENESYS 30 uses advanced signal processing to deliver stable, reliable results down to -3A.</p><h4><strong>Simple to Sophisticated:</strong></h4><p>The GENESYS 30 has the flexibility to perform routine analysis one minute and complex analytical methods the next. The custom Analyzer mode enables you to build your formula with up to six wavelengths, six factors, standard arithmetic operators and absorbance values raised to the 2nd or 3rd power. Use the included Windows® application to design your method. Transfer the method to your GENESYS 30 and run it with the touch of a button. Analyzer mode shows your method name and a continuous display of your results. Technicians can write the result down or print it with a time stamp using the printer accessory.</p><h4><strong>Smarter by Design:&nbsp;</strong></h4><p>GENESYS 30 offers the convenient SmartStart™ feature that has delighted GENESYS 10S users since its introduction. The SmartStart menu gives you direct access to your<strong> 12 favorite methods</strong>. Allowing you to work smarter, not harder.</p><h4><strong>Snap on Printer:&nbsp;</strong></h4><p>Fast and clear printing when you need it. Add printing capability to your instrument. The snap-on thermal printer installs<br>in moments.&nbsp;</p><h4><strong>Quick and Simple Lamp Replacement:&nbsp;</strong></h4><p>No need to remove the cover, just loosen two screws, slide out the old lamp fitting and slide a new one back in. Everything is pre-aligned, just let the new lamp warm up and go back to work.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_3_82082740d3.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer: Quick and simple lamp replacement." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_3_82082740d3.jpg 197w," sizes="100vw" width="1737" height="1376"></p><h3><strong>At Home in the Instructional Laboratory</strong></h3><p><strong>GENESYS spectrophotometers are core teaching instruments in chemistry and biology laboratories around the world. The Thermo Scientific™ GENESYS™ 30 allows students and teachers to focus on examining scientific data and learning scientific concepts instead of learning instrumentation.</strong></p><h4><strong>Easy to Teach, Easy to Learn&nbsp;</strong></h4><p>Clearly labeled, uniquely colored keys simplify instrument operation. New users require little or no training.</p><h4><strong>Get Working – Faster!</strong></h4><p>Large, color digital screen and numeric keypad help you set up methods faster. Simplified software interface gives users maximum control and efficiency.</p><h4><strong>Designed for Today, Built for Tomorrow – Inside and Out!</strong></h4><p>On the inside, GENESYS 30 uses advanced optics, electronics and signal processing to deliver superior measurement performance for its class. On the outside, GENESYS 30 presents a tough exterior built to last for years in the most demanding environments.</p><ul><li>Resistant to spills</li><li>Removable and washable sample compartment</li><li>The sample compartment lid<ul><li>stays where you put it - open or closed</li><li>has a magnetic latch to hold it closed during measurements</li><li>is customer-replaceable should it get broken through abuse</li></ul></li></ul><h4><strong>Simple and Familiar</strong></h4><p>Open the Live Display application with a single button-press to monitor the absorbance or transmittance live – just like a GENESYS 20 or SPECTRONIC 20. The spectrum indicator shows the color of light being absorbed.</p><h4><strong>Special support for OD 600 and test-tube measurements</strong></h4><p>For measurements in test-tubes, the test-tube holder accessory accommodates 100mm x 13mm test-tubes with the lid closed. Or add the tall test-tube adaptor to use larger diameter, taller tubes (up to 150mm, 6 inches) with the lid open. Special OD600 mode for cell growth measurements. Select it from the Home menu and go! No method setup required.</p><h4><strong>Scanning: Simple and Fast</strong></h4><p>Find peaks in the spectrum of your sample by scanning across the spectrum in any range from 325nm to 1100nm with 1nm precision and noise-free peaks up to 3A. Use the cursor and zoom controls to identify λ<sub>max</sub>.</p><h4><strong>Data you can use</strong></h4><ul><li>Print your scan and stick it into a lab notebook using the printer accessory and optional self-stick printer paper.</li><li>Save the data points of your scan to a USB memory device and load the data into a spreadsheet or graphing program for optimal reporting.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_Genesys_30_USB_stick_A_c45fd86787.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer: USB stick." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_Genesys_30_USB_stick_A_c45fd86787.jpg 181w," sizes="100vw" width="543" height="469"></p><h3><strong>VISIONlite Software</strong></h3><p><strong>For users who need the power of computerized data analysis, optional Thermo Scientific™ VISIONlite™ software pairs a simple user</strong><br><strong>interface with a wider range of options for experiment design and data analysis.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific - Genesys spectrophotometers: VISIONlite Software." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h4><strong>Scan Application:</strong></h4><ul><li>Automated peak pick and label</li><li>Overlay spectra and print the results</li></ul><h4><strong>Kinetics Application:</strong></h4><ul><li>Data intervals as low as 1 second</li><li>Enzyme rate calculation with factor</li></ul><h4><strong>Quantitative Analysis:</strong></h4><ul><li>Up to 100 standards</li><li>Linear, quadratic or cubic data fits</li></ul><h4><strong>Performance Verification:</strong></h4><ul><li>Full suite of tests to verify performance of your instrument</li><li>Pre-loaded pass/fail limits specific to your instrument</li></ul><h3><strong>GENESYS 30 Accessories</strong></h3><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_59d912ddd3.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer: GENESYS 30 Accessories." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_59d912ddd3.jpg 243w," sizes="100vw" width="1444" height="929"></p><h3><strong>GENESYS 30 Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> &lt;0.003 A, 325 to 1000 nm smoothed</li><li><strong>Compartments:</strong>&nbsp;<ul><li>Accessible from top, front or side</li><li>Able to accommodate cells up to 100mm pathlength</li><li>Available accessory for test-tubes up to 25mm diameter and 150mm height</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li></ul></li><li><strong>Connections:</strong> USB-A, USB-B</li><li><strong>Description:</strong> GENESYS 30 VIS Spectrophotometer with EU Power Cable</li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> &lt;0.002 A/hr. (At 500 nm after 2 hr. warmup.) Typical &lt;0.004 A/hr. after 1 hr. warmup</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/250 V, 50/60 Hz</li><li><strong>Keypad:</strong> Tactile rubber 23 keys with numeric keypad</li><li><strong>Lamp Life:</strong> 1000 hrs.</li><li><strong>Noise:</strong> (RMS at 500nm. 60 consecutive measurements)<ul><li>≤0.001A at 0A</li><li>≤0.001A at 1A</li><li>≤0.002A at 2A</li></ul></li><li><strong>Optical Design:</strong> Single Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002 A (0 to 0.3 A), 0.5% of ABS reading (0.301 A to 2.5 A)</li><li><strong>Photometric Display:</strong> -3A to +3A, 0 to 200 000 %T, 0 to 9 999 999 C</li><li><strong>Photometric Range:</strong> -3A to +3A</li><li><strong>Photometric Repeatability:</strong> ± 0.002 A (Measured at 1.0 A at 546 nm)</li><li><strong>Printer Included:</strong> Thermal printer accessory with 80 mm width paper</li><li><strong>Scan Speed:</strong> Automatic – up to 1200 nm/min.</li><li><strong>Stray Light:</strong> &lt;0.1%T at 340 nm and 400 nm</li><li>Measured using glass cutoff filters or NaNO₂ at 340 nm</li><li><strong>Warranty:</strong> 2 years standard with 1 year extension upon registration of the instrument with Thermo Fisher Scientific within 6 months of purchase</li><li><strong>Wavelength Accuracy:</strong> ±2 nm</li><li><strong>Wavelength Data Interval:</strong> 1 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±1 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Silicon Photodiode</li><li><strong>Display:</strong> 5 in. 32-bit Color Display, 800 x 480 pixels</li><li><strong>Languages:</strong> English, French, German, Spanish, Italian, Portuguese, Russian, Chinese, Japanese, Korean, Thai, Arabic</li><li><strong>Wavelength Range:</strong> 325 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 40 Vis Spectrophotometer

Perform routine measurements for quality control or teaching in the chemistry classroom with rugged Thermo Scientific™ GENESYS 40 Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 40 Vis Spectrophotometer</strong></h3><p><strong>For teaching labs, research labs and industrial QC requiring robust construction, ease-of-use and software capability.</strong></p><h5><strong>Advanced usability, modern functionality</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_Genesys_40_Kyveta_A_7955a6a01a.jpg" alt="Thermo Scientific™ GENESYS™ 40 Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_Genesys_40_Kyveta_A_7955a6a01a.jpg 234w," sizes="100vw" width="1536" height="1024"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific GENESYS Spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 40 Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.005 A</li><li><strong>Compartments:</strong>&nbsp;<ul><li>Accessible from top, front or side</li><li>Able to accommodate cells up to 100mm cells</li><li>Available accessory for test tubes up to 25 mm diameter and 150 mm height</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available&nbsp;</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0010 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> GENESYS 40 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt;1000 hrs.</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002 A at 0.5 A, ±0.004 A at 1.0 A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –3A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001A at 1A measured at 1.0A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Automatic – up to 1800 nm/min.</li><li><strong>Stray Light:</strong> &lt;0.05%T at 340 nm and 400 nm</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Fixed, 800 x 1280 pixels</li><li><strong>Light Source:</strong> Tungsten Halogen</li><li><strong>Spectral Bandwidth:</strong> 5 nm</li><li><strong>Wavelength Range:</strong> 325 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 140 Vis Spectrophotometer

Perform quantitative measurements in routine industrial QA/QC or university chemistry labs with the automated and network-capable Thermo Scientific™ GENESYS 140 Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 140 Vis Spectrophotometer</strong></h3><p><strong>For advanced teaching labs, R&amp;D, research and life science applications requiring higher throughput or temperature control.</strong></p><h5><strong>Elite performance, enhanced capabilities</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_140_titul_B_bd2a19cbcb.jpg" alt="Thermo Scientific GENESYS Spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_140_titul_B_bd2a19cbcb.jpg 225w," sizes="100vw" width="516" height="358"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific: Genesys spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 140 Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.005 A</li><li><strong>Compartments:</strong> Accommodates (optional):<ul><li>8-position cell changer</li><li>4-position cell changer (long path cells)</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available&nbsp;</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0010 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> Genesys 140 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt;1000 hrs.</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0 A±0.008 A at 2.0A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –3A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Automatic – up to 1800 nm/min.</li><li><strong>Stray Light:</strong> &lt;0.05%T at 340 nm and 400 nm</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Tiltable, 800 x 1280 pixels</li><li><strong>Light Source:</strong> Tungsten Halogen</li><li><strong>Spectral Bandwidth:</strong> 5 nm</li><li><strong>Wavelength Range:</strong> 325 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 50 UV-Vis Spectrophotometer

Perform routine measurements for quality control or teaching in the chemistry classroom with rugged Thermo Scientific™ GENESYS 50 UV-Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 50 UV-Vis Spectrophotometer</strong></h3><p><strong>For teaching labs, research labs and industrial QC requiring robust construction, ease-of-use and software capability.</strong></p><h5><strong>Advanced usability, modern functionality</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_Genesys_50_Kyveta_bae9677ae0.jpg" alt="Thermo Scientific™ GENESYS™ 50 UV-Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_Genesys_50_Kyveta_bae9677ae0.jpg 188w," sizes="100vw" width="534" height="443"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific GENESYS Spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 50 UV-Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.002 A</li><li><strong>Compartments:</strong>&nbsp;<ul><li>Accessible from top, front or side</li><li>Able to accommodate cells up to 100 mm cells</li><li>Available accessory for test-tubes up to 25 mm diameter and 150 mm height</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0005 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> GENESYS 50 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt; 5 years typical, 3 years guaranteed</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –2A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Slow, medium and fast – up to 1600 nm/min.</li><li><strong>Stray Light:</strong> &lt; 1.0%T 198 nm (KCl) , &lt;0.05%T at 220 nm (NaI), &lt;0.03%T at 340 nm (NaNO<sub>2</sub>)</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Fixed, 800 x 1280 pixels</li><li><strong>Spectral Bandwidth:</strong> 2 nm</li><li><strong>Wavelength Range:</strong> 190 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 150 UV-Vis Spectrophotometer

Perform quantitative measurements in routine industrial QA/QC or university chemistry labs with the automated and network-capable Thermo Scientific™ GENESYS 150 UV-Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 150 UV-Vis Spectrophotometer</strong></h3><p><strong>For advanced teaching labs, R&amp;D, research and life science applications requiring higher throughput or temperature control.</strong></p><h5><strong>Elite performance, enhanced capabilities</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_150_titul_B_a202c02cea.jpg" alt="Thermo Scientific™ GENESYS™ 150 Uv-Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_150_titul_B_a202c02cea.jpg 180w," sizes="100vw" width="415" height="360"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific: Genesys spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 150 UV-Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.002 A</li><li><strong>Compartments:</strong> Accommodates (optional):<ul><li>8-position cell changer</li><li>4-position cell changer (long path cells)</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0005 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> Genesys 150 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt; 5 years typical, 3 years guaranteed</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –2A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Slow, medium and fast – up to 1600 nm/min.</li><li><strong>Stray Light:</strong> &lt; 1.0%T 198 nm (KCl) , &lt;0.05%T at 220 nm (NaI), &lt;0.03%T at 340 nm (NaNO<sub>2</sub>)</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Tiltable, 800 x 1280 pixels</li><li><strong>Spectral Bandwidth:</strong> 2 nm</li><li><strong>Wavelength Range:</strong> 190 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 180 UV-Vis Spectrophotometer

Perform high throughput quantitative UV-Vis measurements where a double beam is required as a reference cell position with the  Thermo Scientific™ GENESYS™ 180 UV-Visible Spectrophotometer. 

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 180 UV-Vis Spectrophotometer</strong></h3><p><strong>For laboratories requiring double beam with a reference cell position.</strong></p><h5><strong>High-throughput ready</strong></h5><ul><li>Double-beam optics</li><li>Ideal solution when a reference beam is required, such as for kinetics</li><li>8-cell changer standard</li><li>Make measurements outside the sample compartment without cuvettes using fiber optic coupler and probe</li></ul><p><strong>Designed for laboratories requiring double beam operation with a reference cell position.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_180_titul_D_open_90df06abb8.jpg" alt="Thermo Scientific™ GENESYS™ 180 UV-Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_180_titul_D_open_90df06abb8.jpg 171w," sizes="100vw" width="467" height="427"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific Genesys spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 180 UV-Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.002 A</li><li><strong>Compartments:</strong><ul><li>8-position cell changer (standard)</li><li>Also accommodates (optional):<ul><li>4-position cell changer (long path cells)</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul></li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0005 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt; 5 years typical, 3 years guaranteed</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Double Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –2A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Slow, medium and fast – up to 1600 nm/min.</li><li><strong>Stray Light:</strong> &lt; 1.0%T 198 nm (KCl) , &lt;0.05%T at 220 nm (NaI), &lt;0.03%T at 340 nm (NaNO<sub>2</sub>)</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.1 nm, 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Tiltable, 800 x 1280 pixels</li><li><strong>Spectral Bandwidth:</strong> 2 nm</li><li><strong>Type:</strong> UV-Vis Spectrophotometer</li><li><strong>Wavelength Range:</strong> 190 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific BioMate 160 UV-Vis Spectrophotometer

Perform quantitative measurements in life science laboratories with the automated and network-capable Thermo Scientific™ BioMate™ 160 UV-Visible Spectrophotometer. 

<p><strong>Perform quantitative measurements in life science laboratories with the automated and network-capable Thermo Scientific™ BioMate™ 160 UV-Visible Spectrophotometer. The BioMate 160 Spectrophotometer offers pre-programmed assay methods for nucleic acid and protein concentration as well as cell culture measurements. Optimized for usability and performance, this platform features a high-resolution color touchscreen, optional Wi-Fi networking, and a rugged design.</strong></p><p>The BioMate UV-Vis Spectrophotometer provides automation for high-throughput options and room-light resistance, allowing lid-open operation for improved speed and convenience. Software includes pre-programmed life science methods such as Nucleic Acid A260; Protein A280 and A205; Protein Colorimetric assays and OD600.</p><p>A full line of accessories, including automated cell changers and cell holders, sipper, and fiber optic probes are designed to simplify sampling and accommodate high throughput measurements and temperature control.</p><h5><strong>Features:</strong></h5><ul><li>7-inch high-resolution touchscreen user interface</li><li>Pre-programmed life science methods</li><li>Networking capable (Wi-Fi adaptor available)</li><li>Room light resistance for 'open-lid' operation</li><li>Sipper accessory</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li><li>Accommodates cells up to 100 mm pathlength</li><li>(Optional) 8-position cell changer with switchable turret</li><li>(Optional) 4-position cell changer (long path cells)</li><li>(Optional) Peltier-thermostatted single cell holder (20 °C - 60 °C)</li></ul><h5><strong>Designed for:</strong></h5><ul><li>Advanced teaching labs</li><li>R&amp;D departments</li><li>Applications requiring high throughput or temperature control</li></ul><h4><strong>Specifications</strong></h4><p><strong>Instrument Type:</strong> UV-Visible Spectrophotometer<br><strong>Optical Design:</strong> Dual beam<br><strong>Wavelength Range:</strong> 190–1100 nm<br><strong>Spectral Bandwidth:</strong> 2 nm<br><strong>Photometric Range:</strong> –2 A to +3.5 A<br><strong>Photometric Accuracy:</strong> ±0.002 A at 0.5 A, ±0.004 A at 1.0 A, ±0.008 A at 2.0 A<br><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A (546 nm)<br><strong>Photometric Display:</strong> –3 A to +5 A<br><strong>Noise (RMS at 500 nm):</strong></p><ul><li>≤0.00020 A at 0 A</li><li>≤0.00030 A at 1 A</li><li>≤0.00040 A at 2 A<br><strong>Drift:</strong> &lt;0.0005 A/hr at 500 nm after 1-hour warmup<br><strong>Baseline Flatness:</strong> ±0.002 A<br><strong>Stray Light:</strong></li><li>&lt;1.0%T at 198 nm (KCl)</li><li>&lt;0.05%T at 220 nm (NaI)</li><li>&lt;0.03%T at 340 nm (NaNO₂)</li></ul><h5><strong>Wavelength Performance</strong></h5><ul><li><strong>Accuracy:</strong> ±0.5 nm</li><li><strong>Repeatability:</strong> ±0.2 nm</li><li><strong>Data Interval Options:</strong> 0.2, 0.5, 1, 2, 5 nm</li><li><strong>Scan Speed:</strong> Slow, medium, fast (up to 1600 nm/min)</li></ul><h5><strong>Display &amp; User Interface</strong></h5><ul><li><strong>Touchscreen:</strong> 7 in. high-definition color, tiltable (800 × 1280 px)</li><li><strong>Keypad:</strong> Touchscreen interface</li></ul><h5><strong>Connectivity &amp; Data Handling</strong></h5><ul><li><strong>Connections:</strong> Single USB-A, Duplex USB-A</li><li><strong>Data Export:</strong> USB, Ethernet, Wi-Fi adaptor (optional)</li><li><strong>Printer Support:</strong> Snap-on printer (optional), USB/Ethernet/Wi-Fi printing available</li></ul><h5><strong>Sample Compartment Compatibility (Optional Accessories)</strong></h5><ul><li>8-position or 4-position cell changers</li><li>Long path cell changer</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul><h5><strong>General Specifications</strong></h5><ul><li><strong>Lamp Life:</strong> &gt;5 years typical, 3 years guaranteed</li><li><strong>Detector Type:</strong> Dual silicon photodiodes</li><li><strong>Dimensions (L × W × H):</strong> 35.5 × 38.5 × 19.5 cm</li><li><strong>Weight:</strong> 7.5 kg</li><li><strong>Power Requirements:</strong> 100–240 V, 50/60 Hz (auto-selecting via external AC–DC converter)</li><li><strong>Certifications:</strong> Certificate of Analysis (COA), Certificate of Conformance (COC)</li><li><strong>Warranty:</strong> 2 years standard + 1-year extension upon registration</li><li><strong>Unit Size:</strong> Each</li></ul>

Products from category UV-VIS spectrophotometers focused on UV–VIS spectrophotometry from Thermo Fisher Scientific - page 1

Related content

Steroidal hormones and neurosteroids – novel therapeutic strategies in bacterial infections

News from LabRulezICPMS Library - Week 19, 2026

Wiley expands its trusted IR and Raman spectral library collections