<h3><strong>Lunch &amp; learn tips &amp; tricks series 2026 – part 1</strong></h3><p><strong>In modern analytical laboratories, efficiency, consistency, and data confidence are essential. Whether you are operating an ICP-OES or ICP-MS system, the way you use your software can significantly influence productivity and analytical performance. In the first session of our Lunch &amp; Learn Tips &amp; Tricks Series, we focused on one of the most common themes raised by users: how to navigate </strong><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489"><strong>Qtegra </strong></a><strong>software more effectively and optimize everyday workflows.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Fisher_Scientific_Mastering_Qtegra_Software_Practical_Strategies_to_Improve_Your_Daily_Lab_Workflow_3d35454782.jpg" alt="Thermo Fisher Scientific: Mastering Qtegra Software: Practical Strategies to Improve Your Daily Lab Workflow" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Fisher_Scientific_Mastering_Qtegra_Software_Practical_Strategies_to_Improve_Your_Daily_Lab_Workflow_3d35454782.jpg 245w," sizes="100vw" width="1024" height="512"></p><p><strong>This session explored three key areas in detail: </strong>understanding the structure of Qtegra and the Configurator, using the Dashboard as your operational control center, and building smarter, more efficient LabBooks. Below is a structured recap of the key insights shared during Part 1.</p><h3><strong>Understanding the structure of Qtegra</strong></h3><p>One of the most valuable features of Qtegra software is its consistency across multiple instrument platforms. Whether you are working with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?category=227&amp;instrumentationItems=84&amp;manufacturerItems=3&amp;search=icap+pro"><strong>iCAP PRO ICP-OES</strong></a>, the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products?category=232&amp;instrumentationItems=83&amp;manufacturerItems=3"><strong>iCAP MX ICP-MS</strong></a>, the iCAP 7000 OES, or Qnova ICP-MS systems, the interface and workflow logic remain familiar. This consistency reduces the learning curve when transitioning between instruments and supports standardised training across laboratories.</p><p><strong>Qtegra consists of two primary components:</strong> the Qtegra application itself and the Configurator.</p><ul><li><strong>The Qtegra application</strong> is where you directly interact with your instrument. It is used to create LabBooks, control the instrument, execute analyses, and review results.</li><li><strong>The Configurator</strong>, in contrast, defines how your system behaves at a deeper level. It controls system-level settings that underpin daily operation. Within the Configurator, users can manage features such as Fast Uptake setup, drain sensor configuration, wavelength libraries for ICP-OES systems, the Reaction Database for ICP-MS systems, and user access permissions.</li></ul><p>Understanding the distinction between these two components helps users troubleshoot more effectively and ensures that system configuration aligns with laboratory requirements.</p><h3><strong>Using the dashboard as your central hub</strong></h3><p>When Qtegra is opened, the first screen presented is the Dashboard. The Dashboard functions as the central hub for instrument monitoring and control. From this location, users can view instrument status, monitor live operating parameters, access tuning tools, review performance checks, and identify error or interlock notifications.</p><ul><li><strong>For ICP-OES users</strong>, the Dashboard provides access to tune sets, source settings, AutoPeak alignment, autotuning functions, and live views such as Plasma TV. These tools allow users to confirm that the plasma and optical system are performing as expected before analysis begins.</li><li><strong>For ICP-MS users</strong>, the Instrument tab within the Dashboard provides access to autotune routines, performance report summaries, gas flow settings, nebuliser adjustments, operating mode selection such as Standard, KED, or CCT modes, IntelliLens control, and real-time data streams.</li></ul><p>The Dashboard should be used as a structured checkpoint before running any analysis. Confirming that all parameters are within acceptable ranges reduces the likelihood of interruptions and supports consistent performance throughout the run.</p><h3><strong>The get ready workflow: structured instrument preparation</strong></h3><ul><li><strong>The Get Ready function</strong>, which is launched directly from the Dashboard, provides a guided preparation workflow. This feature is designed to ensure that the instrument is fully configured and operating correctly for the selected method before analysis begins.</li><li><strong>Within Get Ready</strong>, users can access scheduling tools that automate warmups, standby routines, shutdowns, and maintenance checks. These tools are particularly beneficial for laboratories operating multiple shifts or managing variable workloads.</li></ul><p>For<strong> ICP-MS systems</strong>, the Get Ready workflow includes automated performance checks, autotune routines, and controlled warm-up conditions. These routines verify that the instrument is operating within its expected performance range.</p><p>By following the structured steps within Get Ready, laboratories can reduce the risk of missed preparation tasks and maintain day-to-day analytical consistency.</p><h3><strong>Building smarter LabBooks</strong></h3><p>The LabBook forms the foundation of every analytical sequence in Qtegra. A carefully constructed LabBook improves efficiency, reduces setup errors, and simplifies data review.</p><p>Users can create a LabBook from scratch or begin with a template. Templates are particularly useful for laboratories that integrate with LIMS systems or import sample lists via CSV files, as they promote standardisation and consistency.</p><h4><strong>Defining analytes</strong></h4><ul><li><strong>For ICP-OES methods</strong>, users must select appropriate wavelengths and evaluate potential spectral interferences.&nbsp;</li><li><strong>For ICP-MS methods</strong>, users select the required masses, consider isobaric and polyatomic interferences, and use the Reaction Database to support reaction mode selection.</li></ul><p>Careful analyte selection at this stage helps prevent complications later in the analytical workflow.</p><h4><strong>Configuring acquisition parameters</strong></h4><p>Acquisition parameters define how the instrument collects data.</p><ul><li><strong>For ICP-OES systems</strong>, this includes selecting viewing modes, choosing wavelength ranges such as iFR or eUV, and defining integration times.</li><li><strong>For ICP-MS systems</strong>, this includes selecting operating modes such as Standard, KED, or CCT, configuring Reaction Finder options, enabling Intelligent Matrix Handling, and defining digital trigger settings.</li></ul><p>Thoughtful parameter configuration ensures that data quality objectives are met without unnecessary reanalysis.</p><h4><strong>Using intelligent uptake and rinse</strong></h4><p>The Intelligent Uptake and Rinse feature detects when the sample or rinse solution reaches the nebuliser. This ensures consistent timing across samples and improves overall throughput. In high-throughput environments, this feature contributes to both efficiency and reproducibility.</p><h4><strong>Calibration and quantification strategy</strong></h4><p>Calibration design is central to reliable quantification. Qtegra allows users to manage global standards, configure dilution tools, select calibration fit types, assign internal standards, and establish quality control samples.</p><p>For ICP-OES systems, users can define standard ranges and switch points. For SemiQuant workflows, Relative Sensitivity Factors can be applied.</p><p>Establishing these parameters during LabBook creation ensures that data validation is straightforward once analysis is complete.</p><h4><strong>Autosampler and sample list setup</strong></h4><p>For laboratories using the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1715"><strong>iSC-65 autosampler</strong></a>, features such as StepAhead, custom rack definitions, colour-coded sample views, and visual integrity checks support efficient sequence management.</p><p>When constructing the sample list, users should clearly define sample types, establish a logical sequence order, and configure column layouts appropriately. Setting flags and limits during initial setup simplifies the data review process and supports quality assurance.</p><h3><strong>Why workflow optimisation matters</strong></h3><p>Optimising Qtegra usage does not require learning new software features. Instead, it involves using existing tools more strategically. By treating the Dashboard as a pre-run checkpoint, using Get Ready consistently, and constructing LabBooks with long-term efficiency in mind, laboratories can reduce downtime, improve reproducibility, and strengthen confidence in analytical results.</p><h3><strong>Looking ahead to part 2</strong></h3><blockquote><p><strong>In Part 2 of the Qtegra Tips &amp; Tricks series</strong>, we will focus on post-analysis best practices. Topics will include interpreting signal intensities, reviewing calibration performance, evaluating recoveries and readbacks, applying flags effectively, exporting data, and implementing practical workflow improvements discussed in Part 1.</p></blockquote><p>By building a structured approach to both preparation and data review, laboratories can transform routine analysis into a streamlined, reliable, and repeatable process.</p><p>We look forward to continuing the discussion in <strong>Part 2</strong>.</p><h5><strong>Acknowledgement</strong></h5><p>I would like to thank <strong>Matthew Gregory </strong>Field Applications Scientist, North EMEA, Trace Elemental Analysis and <strong>David Fishwick </strong>Field Applications Scientist, North EMEA, Trace Elemental Analysis for the support on this blog and the webinars</p><h4><strong>Sign up for our webinars live and on demand.</strong></h4><p><strong>English</strong></p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5795"><strong>Lunch and Learn Tips and Tricks Series: Qtegra Part 1</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5976"><strong>Lunch and Learn Tips and Tricks Series: Qtegra Part 2</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5977"><strong>Lunch and Learn Tips and Tricks Series: Trace Elemental Analysis (ICP-OES &amp; ICP-MS)</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5978"><strong>Trace Elemental Analysis: Ask the Expert</strong></a></li></ul><p><strong>Deutsch</strong></p><ul><li><strong>19. März 2026</strong> <a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179134/393E071E3B501943730958BA6203F477">Interne Standards in der ICP-OES: Ein Praxisguide für zuverlässige Qualitätssicherung im Labor</a></li><li><strong>18. Juni 2026</strong> <a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179292/AE4C576B6A54D1AC182F7F77573D380F">Fehler reduzieren, Durchsatz steigern: Autoverdünnung mit PrepFast am ICP-MS</a></li><li><strong>17. September 2026</strong> <a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179423/B5019C560431BADCA2A76E54E4EFE56F">ICP-OES smarter nutzen: Probendurchsatz erhöhen, Ressourcen sparen</a></li><li><strong>17. Dezember 2026</strong> <a target="_blank" rel="noopener noreferrer" href="https://event.on24.com/wcc/r/5179530/94EEDD1F56138F5EEE2AF24E29E6C12A">Qtegra ISDS Software Unlocked – Live im Expertengespräch</a></li></ul><p><strong>Visit us on&nbsp;</strong><a target="_blank" rel="noopener noreferrer" href="https://www.linkedin.com/showcase/72003132/admin/dashboard/"><strong><u>LinkedIn:</u></strong></a><strong>&nbsp;</strong>#Qtegra, #ICPMS, #ICPOES, #TraceElementalAnalysis</p><blockquote><h5><strong>Petra Gerhards</strong></h5><p>Petra Gerhards, Dipl-Ing, is Regional Marketing Manager of GC and GC-MS for EMEA at Thermo Fisher Scientific. She has more than 29 years of experience in the fields of GC-MS, SPE and LC-MS. Since joining the regional team she has contributed to workflow solutions combining vials and closures with SPE solutions, GC-MS and LC-MS. She works with KOL's on data for regional specific marketing campaigns, organizes in-house seminars and works on customer specific solutions. Her main expertise is in the field of doping and drugs-of-abuse analysis.</p></blockquote>

Mastering Qtegra Software: Practical Strategies to Improve Your Daily Lab Workflow

<h4><strong>1 - What is fitness for purpose?&nbsp;</strong></h4><p>The test meets the necessary performance criteria for a clinical binary examination<strong> to ensure it is suitable for making accurate and reliable clinical decisions in the intended patient population. </strong>Among others, performance criteria include clinical sensitivity and clinical specificity.&nbsp;</p><h4><strong>2 - How to assess clinical performance?&nbsp;</strong></h4><p>Assessing the clinical performance of a binary examination, stating results as 'positive' or 'negative,' involves calculating the examination's <strong>Clinical Sensitivity and Clinical Specificity</strong>. From the physician's point of view, clinical performance is evaluated by using predictive values, i.e., how likely is it that a positive or negative result corresponds to the presence or absence of the condition, which is also influenced by the prevalence of the condition in the population being tested.&nbsp;</p><h4><strong>3 - What is Clinical Sensitivity?&nbsp;</strong></h4><p><strong>Clinical sensitivity (SS)</strong>, also known as the True Positive Rate, measures the proportion of true positives correctly identified by the test. Data from a group of subjects who have been confirmed to have the disease or condition through diagnosis or a gold standard test (<i>D<sub>1</sub></i> in Table 1) are needed to calculate clinical sensitivity.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Table_1_2x2_Contingency_table_for_clinical_diagnosis_241735a171.jpg" alt="Eurachem: Table 1. 2x2 Contingency table for clinical diagnosis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Table_1_2x2_Contingency_table_for_clinical_diagnosis_241735a171.jpg 245w," sizes="100vw" width="1401" height="461"></p><p>The formula for clinical sensitivity is:&nbsp;</p><p><i><strong>SS = tp / (tp + fn)</strong></i>, with:&nbsp;</p><ul><li><i>tp</i>, <strong>True Positives</strong> are the cases where the test correctly identifies the presence of the disease.&nbsp;</li><li><i>fn</i>, <strong>False Negatives</strong> are the cases where the test incorrectly identifies the absence of the disease when it is actually present.&nbsp;</li></ul><p>Table 1 represents the components of clinical sensitivity and specificity. Figure 1 illustrates an example of the overlapping of the number of components. The symbol "∩" represents the intersection of groups. For example, <i>D<sub>1</sub></i>∩n denotes the set of negative results obtained for known positive cases, i.e., false negatives.</p><h4><strong>4 - What is Clinical Specificity?&nbsp;</strong></h4><p><strong>Clinical Specificity (SP)</strong>, also known as the True Negative Rate, measures the proportion of true negatives correctly identified by the test. Data from a group of subjects who have been confirmed not to have the disease or condition through a gold standard test (<i>D<sub>0</sub></i> in Table 1) are needed to calculate clinical specificity.</p><p>The formula for clinical specificity is:&nbsp;</p><p><i><strong>SP = tn / (tn + fp)</strong></i>, where:&nbsp;</p><ul><li><i><strong>tn</strong></i>, <strong>True Negatives</strong> are the cases where the test correctly identifies the absence of the disease.&nbsp;</li><li><i><strong>fp</strong></i>, <strong>False Positives</strong> are the cases where the test incorrectly identifies the presence of the disease when it is actually absent.&nbsp;</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_1_Graphical_representation_of_an_example_of_85ab82a16b.jpg" alt="Eurachem: Figure 1. Graphical representation of an example of tp (D1∩p), tn (D0∩n), fn (D1∩n), and fp (D0∩p). " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_1_Graphical_representation_of_an_example_of_85ab82a16b.jpg 245w," sizes="100vw" width="1300" height="736"></p><h4><strong>5 - How to calculate the uncertainty of clinical sensitivity and specificity?</strong></h4><p>Calculating clinical sensitivity and specificity uncertainty <strong>involves statistical methods that estimate each parameter's confidence interval (CI)</strong>. These intervals provide a range of values within which the true sensitivity or specificity is expected to lie with a certain level of confidence,<strong> typically 95 %</strong>. Please refer to the AQA:2021 for information about statistical models to compute the 95 % CI [1].</p><h4><strong>6 - How to define targets?&nbsp;</strong></h4><p>Target minimum values for clinical sensitivity and specificity should be identified. These values may originate from regulations or criteria based on the intended use of the binary results. A target or minimum value for the lower limit of the 95 % CI for result rate, i.e., SS or SP, (<i>LL<sub>SS.95</sub> </i>or <i>LL<sub>SP.95</sub></i>) or the upper limit of the 95 % CI for result rate (<i>HL<sub>SS.95</sub></i> or <i>HL<sub>SS.95</sub></i>) should also be defined according to the purpose of the analysis. The target or minimum value (LL<sub>SS</sub><sup>tg </sup>or LL<sub>SP</sub><sup>tg</sup>) is particularly significant when the impact of false results is critical. For example, for blood components used in transfusions, the screening for infectious diseases should be performed with tests associated with an <i>LL<sub>SS.95</sub> </i>close to 100 %.&nbsp;</p><p><strong>Figure 2</strong> illustrates five different tests, each assessed for clinical sensitivity and its associated uncertainty. These cases reflect different levels of compliance with a target sensitivity of 0.5. Case 1 is non-compliant, Cases 2 to 4 are partially compliant, and Case 5 is compliant. From a simplified statistical power view, the laboratory should always take into account the minimum number of samples when defining its target. This number can be estimated by simulation. For example, for a clinical sensitivity of 90 % the evaluation will require a minimum of 10 samples. It should be emphasized that samples must be representative of the target population for a clinical power evaluation - for example, epidemiologically representative samples of the types and subtypes of a given virological agent are required.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Figure_2_Compliance_assessment_with_clinical_sensitivity_a21ece043c.jpg" alt="Eurachem: Figure 2. Compliance assessment with clinical sensitivity uncertainty using the lower 95% confidence interval limit for five performance assessment scenarios. " srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Figure_2_Compliance_assessment_with_clinical_sensitivity_a21ece043c.jpg 245w," sizes="100vw" width="1500" height="648"></p>

Performance Assessment of Binary Output Examinations in Medical Laboratories

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 30th March 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Metrohm,</strong> <strong>Shimadzu, Thermo Fisher Scientific </strong>and <strong>Waters Corporation!</strong></p><h3><strong>1. Metrohm: Quantification of methanol in contaminated spirits</strong></h3><p><strong>Protecting consumers from contaminated beverages</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_rs_056_download_3b37cb883a.pdf"><strong>Full PDF for download</strong></a></li></ul><p>An alarming global trend highlights the serious harm that can result from ingesting illegal, improperly distilled alcohol. Home-distilled spirits prepared using industrial solvents (i.e., wood alcohol) and presented as legitimate alcoholic beverages often contain methanol. Methanol causes blindness and can lead to death when ingested. This has led to fatal consequences around the world [1–3].&nbsp;</p><p>The breaking point for the Czech Republic came in September 2012. The sale of hard liquor was temporarily banned after 20 people died from the consumption of spirits with dangerous levels of methanol [2]. After an exhaustive study using various screening tools, the Czech Republic adopted Raman spectroscopy as the method of choice for identifying and quantifying methanol in contaminated spirits. This Application Note demonstrates how Raman spectroscopy can be employed as an efficient and rapid screening method for samples of rum contaminated with methanol.</p><h4><strong>EXPERIMENT&nbsp;</strong></h4><p>This example study measures commercially available coconut rum that is spiked with methanol in concentrations between 0.33% and 5.36%. The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=220&amp;search=iRaman"><strong>iRaman NxG 785H</strong></a> with a fiber-optic probe is used to collect Raman spectra of the mixtures (Figure 3). Table 1 lists the relevant equipment and instrument settings used for this application study. The peak at around 1000 cm-1 (highlighted by the inlay of Figure 3) visibly increases with increasing concentration of methanol, becoming significant at approximately 1%.</p><h4><strong>CONCLUSION</strong></h4><p>These results validate that Raman spectroscopy can be used for rapid, quantitative screening of dangerous adulterants in alcoholic beverages. This technique can be expanded to investigate adulteration in other media such as food, petroleum, and pharmaceutical drugs [4].</p><h3><strong>2. Shimadzu: Evaluation of Organic Impurities in Lithium Carbonate by TOC Analysis</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01098_en_ec9b3e73fc.pdf"><strong>Full PDF for download</strong></a></li></ul><h4><strong>User Benefits</strong></h4><ul><li>TOC analysis enables effective control of organic impurities in lithium carbonate.</li><li>Using the combustion tube kit for high-salt samples can extend the lifespan of the combustion tube and catalyst, reducing maintenance frequency.</li><li>With the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=ASI-L+autosampler"><strong>ASI-L autosampler</strong></a>, multiple samples can be measured automatically, improving throughput and efficiency</li></ul><p>Lithium carbonate (Li2CO3) is an important material used in a wide range of applications in the lithium-ion battery industry. For example, it is used as a lithium source for cathode active material synthesis and electrolyte salt production, as a raw material for oxide-based solid electrolytes, and as a form of lithium commonly recovered in recycling processes.&nbsp;</p><p>Because impurities in lithium carbonate can affect downstream processes and final products, appropriate control is essential. In particular, organic impurities require especially careful attention because they may originate from so many sources, such as solvents and processing aids used during purification, residual organics from manufacturing steps, or contamination introduced during handling and storage.&nbsp;</p><p>Total organic carbon (TOC) analysis offers an effective way to manage such organic impurities in raw materials. This article presents an example of using a <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=1&amp;search=TOC-L"><strong>Shimadzu TOC-L</strong></a> total organic carbon analyzer (Fig. 1) to evaluate the TOC content of lithium carbonate.</p><h4><strong>TOC Analysis&nbsp;</strong></h4><h5><strong>TOC Analysis Methods&nbsp;</strong></h5><p>Two commonly used methods are available for TOC analysis:&nbsp;</p><p><strong>(1) TC - IC method: </strong>Total carbon (TC) and inorganic carbon (IC) are measured separately, and then TOC is calculated as the difference (TOC = TC – IC).</p><p><strong>(2) NPOC method: </strong>TOC is measured as non-purgeable organic carbon (NPOC). After acidifying the sample to pH &lt; 3, IC is subsequently removed by sparging and the remaining carbon is measured as TC, which is regarded as TOC. The acidification and sparging steps are performed automatically by the instrument.&nbsp;</p><p>For lithium carbonate solutions, the amount of carbonatederived IC is typically very high. As a result, the TC–IC method tends to yield calculated TOC values with a larger relative error. Therefore, the NPOC method isrecommended.</p><p>&nbsp;In lithium carbonate solutions prepared as described above, IC is expected to be present mainly as bicarbonate (HCO<sub>3</sub> <sup>–</sup>) and carbonic acid (H<sub>2</sub>CO<sub>3</sub>). If IC is not fully removed during NPOC pretreatment, the TOC result may be overestimated. Therefore, thorough IC removal is critical for samples with high IC content. For actual samples, sparging parameters, such as sparge gas flow rate and sparge time settings, can be adjusted.&nbsp;</p><h5><strong>Combustion Tube for High-Salt Samples&nbsp;</strong></h5><p>The prepared lithium carbonate solution contains a large amount of salts. When a large number of salt-containing samples are analyzed, salts may accumulate inside the combustion tube, which can lead to catalyst clogging, reduced sensitivity, and poorer repeatability.</p><p>For this analysis, the optional combustion tube for high-salt samples was used, shown in Fig. 2. The high-salt combustion tube has a larger diameter than the standard combustion tube and contains larger catalyst particles to help mitigate saltrelated clogging. Thus, the frequency of combustion tube replacement can be significantly reduced.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>In this article, TOC analysis was performed for a 10 g/L lithium carbonate solution using a Shimadzu TOC-L total organic carbon analyzer. By measuring TOC in the prepared solution, the TOC content in the lithium carbonate solid was calculated. The results showed good recovery rates in the spike-recovery test and consistent performance was also confirmed during long-term continuous analysis. These findings demonstrate that the TOC-L is a reliable solution for measuring TOC in lithium carbonate and for effective management of organic impurities.&nbsp;</p><p>When applying the NPOC method to lithium salt-containing solutions, careful selection of the acid is essential because salts formed during acidification can affect both data quality and instrument condition. For this example, sulfuric acid is recommended.</p><p>In addition, using the optional combustion tube kit for high-salt samples can extend the lifespan of the combustion tube and catalyst, thereby reducing maintenance frequency. This option is especially helpful for samples with high salt concentrations.&nbsp;</p><p>In addition to lithium carbonate, the TOC-L can also be applied to TOC analysis of lithium hydroxide solutions, determination of water-extractable TOC in recycled black mass, and analytical needs in lithium refining processes based on direct lithium extraction (DLE). With its broad applicability across various upstream materials, recycling streams, and refining processes, the TOC-L supports both quality control and process optimization operations throughout the lithium-ion battery value chain.</p><h3><strong>3. Thermo Fisher Scientific: Evaluating Silicon using Raman Microscopy</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/vib_silicon_analysis_with_raman_microscope_app_note_mcs_an1232_en_11_2024_1887815_web_50639c9148.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Raman spectroscopy is a form of vibrational spectroscopy that probes chemical bonds and molecular structure and is sensitive to small changes in chemical and structural environments. The Raman spectrum of a material is a molecular “fingerprint” that can be used for identification of unknown materials and for characterizing and qualifying expected materials. Since intermolecular effects and lattice vibrations are also detected, it can be used to evaluate crystallinity. Mechanical phenomena such as strain can also be detected from peak shifts in Raman spectra. Raman imaging allows visualization of the distribution of components or changes in physical state across the sample.</p><h4><strong>Silicon in aluminum&nbsp;</strong></h4><p>Silicon is used in alloys with aluminum to increase the strength of lightweight aluminum-based parts. Addition of silicon to aluminum also alters the viscosity of melted aluminum, improving the castability. These alloys typically contain 3% to 25% silicon. While silicon and aluminum can form a eutectic mixture, it is common to have finely dispersed silicon particles throughout the material.¹ The size and distribution of silicon particles can affect the strength of the aluminum.&nbsp;</p><p>One common example of an aluminum product, aluminum foil, is made up of almost pure aluminum (approximately 98.5%) but it does contain small amounts of silicon and iron.² Raman imaging of a piece of aluminum foil reveals small particles of silicon (Figure 1). A <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2237"><strong>Thermo Scientific™ DXR3xi Raman Imaging Microscope </strong></a>was used with a 532 nm laser and a 100X&nbsp;metallurgical objective to collect the Raman imaging data. An area of 408 μm x 208 μm was imaged using an image pixel size of 1 μm. The Raman image, based on the 520 cm-1 peak of silicon, shows the spatial distribution of the particles and image analysis provides size and shape information. In this case, 81&nbsp;silicon particles were identified with a size (area) range of 6-151 μm². This analytical approach may be extrapolated to other types of Si/Al alloy parts.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>The importance of silicon as a technologically significant material cannot be overstated. It has properties that make it useful in numerous different types of products. Raman micro-spectroscopy has proven itself an important tool for the assessment of molecular structure and physical states of silicon. Raman images provide a way to observe the spatial distribution of silicon and silicon-containing components, structural variations such as crystallinity, and physical effects such as strain. This note showed a few representative examples to illustrate some of the advantages offered by Raman microscopic analysis of silicon. The coverage is not intended to be comprehensive as there are numerous other areas where the Raman analysis of silicon is currently employed and other opportunities where it could be used. The Thermo Scientific DXR3 Raman Microscope and the Thermo Scientific DXR3xi Raman Imaging Microscope have both been shown to be excellent choices for the Raman analysis of silicon samples.</p><h3><strong>4. Waters Corporation: High-Throughput Detection of Degraded Polysorbate in Biological Formulations with FMM</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009114_en_99c7483d1a.pdf"><strong>Full PDF for download</strong></a></li></ul><p>The FDA requires that all biologic formulations be free of visible particles and has defined allowable levels of subvisible particles (SVPs) larger than 10 µm to ensure the potency, efficiency, and safety of these drug.<sup>1</sup> While most protein drug particle analysis focuses on particles formed due to formulation instability, SVPs formed through the degradation of formulation excipients must also be considered.&nbsp;</p><p>Polysorbates 20 (PS20) and 80 (PS80), best known as Tween-20 and -80, are excipients used in &gt;70% of marketed parenteral biological drugs to improve product stability and shelf life.<sup>2</sup> However, when these formulations are stored for long periods of time (&gt;6 months) at low temperatures (4 °C), visible and subvisible particles are formed due to the enzymatic hydrolysis of the polysorbates by host cell proteins (HCPs) such as esterases and lipases.<sup>3,4</sup> PS20 in particular has been found to be extremely prone to degrading into fatty acid particles.<sup>5</sup> Lauric, myristic and palmitic acids are the most common fatty acid degradation products, and there is a direct correlation between low fatty acid solubility and particle formation in common formulation buffers.<sup>3–7</sup> However, high-throughput, sensitive, and specific analysis of polysorbate particles has been difficult due to their complex chemistry and their low concentrations (&lt;&lt;0.5%) in high protein concentration (&gt;100–200 mg/mL) formulation environments, making it a perennial needle in a haystack problem.</p><p>In this application note, we introduce the Aura™ polysorbate degradation assay, a specific and quantitative assay that detects free fatty acid particles (FFAs) formed during polysorbate degradation on Aura PTx System. The assay analyzes 96 samples using anywhere from 5 µL–10 mL of sample in a few hours. <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2190"><strong>Aura™ Systems</strong></a> use backgrounded membrane imaging (BMI) and fluorescence membrane microscopy (FMM) to count, size and ID particles from 1 µm to 5 mm. Fluorescent labels utilized by FMM are selected based on thier ability to interact with particles of a certain nature, allowing for the generation of key information related to identity of the particles.</p><h4><strong>Results and Discussion&nbsp;</strong></h4><h5><strong>Morphological Appearance of Different Fatty Acid Particles&nbsp;</strong></h5><p>Aura systems image every particle, enables subvisible particle size distributions analysis, and makes morphological differentiation possible using built-in image analysis filters. When we analyze different free fatty acid solutions with Aura PTx System, we find that each forms particles with different morphological characteristics. Lauric acid particles are large and irregular clusters, myristic acid particles are small and oval shaped, and palmitic acid particles form fibril-like particles and small circular clusters (Figure 2a-c). These unique morphological characteristics suggest the presence of free fatty acid particles that can then be confirmed with FMM using labeled fluorescence.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>Aura PTx System and <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2190"><strong>Aura+ System</strong></a> can easily detect the major degradation components of PS20 in proteincontaining samples at any stage of the drug manufacturing process. The method only requires 5 µL of sample, is specific and sensitive, and can analyze 96 samples in just a few hours, far outperforming other techniques. Aura PTx System and Aura+ System can also identify and differentiate the key degraded particulates from polysorbate formulation by their distinguishable shape, appearance, and specific labeling with BODIPY FL C16. The Aura polysorbate assay can detect FFAs at concentrations relative to lauric acid above 9.38 µM (&gt;2183 counts/mL) and quantitate above 18.75 µM (&gt;2976 counts/mL).</p>

News from LabRulezICPMS Library - Week 14, 2026

Software

Article

Product

Application

Academy

Video

A unique company dedicated to serving science helping our customers drive productivity and accelerate results. Through our premier brands – Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific and Unity Lab Services.

Thermo Fisher Scientific

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

LECO Cold Mounting Castable Mounts for Metallographic Sample Preparation

Cold mounting materials from LECO include polyester, acrylic, and epoxy resins designed for porous, brittle, or heat-sensitive samples, ensuring easy handling and excellent edge integrity.

<p><strong>Cold mounting—also known as castable mounting—is a metallographic sample preparation technique that uses liquid mounting media to fully encase a specimen. Common mounting materials include polyester, acrylic, and epoxy resins. After the sample is positioned in a mold, a catalyst is added to initiate curing and hardening of the mounting compound.</strong></p><p>This mounting approach is especially suitable for laboratories with lower throughput but a high diversity of samples. Cold mounting is often the preferred—or required—method for porous, brittle, irregularly shaped, or heat-sensitive specimens that cannot withstand the temperature and pressure of hot mounting. Once cured, the mounted samples are easier to handle during grinding, polishing, and analysis, while preserving edge integrity and microstructural features.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Zalevaci_kelimky_pro_pripravu_metalografickych_vzorku_2_b63c61bea7.jpg" alt="LECO: Cold Mounting Castable Mounts for Metallographic Sample Preparation" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Zalevaci_kelimky_pro_pripravu_metalografickych_vzorku_2_b63c61bea7.jpg 178w," sizes="100vw" width="884" height="776"></p><h4><strong>Cold Mounting Media Options</strong></h4><p>We offer a complete range of cold mounting materials to support different laboratory needs and sample types:</p><ul><li><strong>Polyester Resins</strong><br>Polyesters are an economical solution for laboratories processing lower sample volumes and where edge retention is not a primary concern. They allow for fast and straightforward mounting and are well suited for routine applications requiring quick turnaround.</li><li><strong>Acrylic Resins</strong><br>Acrylics cure faster than most other castable mounting materials and offer good abrasion resistance with fair edge retention. They are commonly used when multiple mounts are required and hot mounting is impractical. When used with a pressure chamber, such as the LECOMAT Pressure Vessel, acrylics can produce semi-clear mounts.</li><li><strong>Epoxy Resins</strong><br>Epoxies provide hard, chemically resistant, and abrasion-resistant mounts with excellent edge retention. Although they generally require longer curing times, they offer superior flow characteristics and minimal shrinkage. Long-cure epoxies are ideal for challenging samples and can be vacuum-impregnated to remove trapped air and fill internal voids. Quick-cure epoxy formulations are also available, curing in less than one hour.</li></ul><h4><strong>Available Products (Models)</strong></h4><ul><li><strong>Castolite</strong> – Polyester</li><li><strong>LECOSET 7000</strong> – Polyester</li><li><strong>LECOSET 7008</strong> – Acrylic</li><li><strong>Quick-Cure Epoxies</strong></li><li><strong>Long-Cure Epoxies</strong></li></ul><h4><strong>Accessories and Options</strong></h4><ul><li>Ring molds</li><li>Silicone rubber molds</li><li>Mold cups</li><li>General mounting supplies</li><li><strong>LECOMAT Pressure Vessel</strong> for pressure impregnation and improved clarity</li></ul>

LECO BG Series Belt Grinder for Metallographic Sample Polishing

The LECO BG Series belt grinders provide durable, safe, and flexible wet or dry grinding for metallographic and spectrographic sample preparation in single- or dual-belt configurations.

<p><strong>The BG Series belt grinders are designed to deliver durable, safe, and convenient grinding performance for metallographic and spectrographic sample preparation. Available in both single-belt and dual-belt configurations, the BG Series supports efficient material removal while maintaining operator safety and consistent results.</strong></p><p>By combining the grinder with an optional dust collector or a recirculating system, the BG Series can be configured for either dry or wet grinding, making it a flexible solution for a wide range of laboratory workflows. Its robust construction and straightforward operation make it well suited for routine use in production, quality control, and research laboratories.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_BG_Pasova_bruska_pro_lesteni_metalografickych_vzorku_5_adfd9793f2.jpg" alt="LECO: BG Series Belt Grinder for Metallographic Sample Polishing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_BG_Pasova_bruska_pro_lesteni_metalografickych_vzorku_5_adfd9793f2.jpg 245w," sizes="100vw" width="1303" height="691"></p><h4><strong>Key Features</strong></h4><ul><li>Heavy-duty 1 HP (0.75 kW) motor for reliable and consistent grinding performance</li><li>Enclosed belt tension mechanism that prevents belt slippage and improves coolant and debris drainage</li><li>Integrated safety guards to maximize operator protection during operation</li><li>Corrosion-resistant aluminum external surfaces for long service life in laboratory environments</li></ul><h4><strong>Available Models</strong></h4><ul><li><strong>BG30</strong> – Single belt drive configuration</li><li><strong>BG32</strong> – Dual belt drive configuration</li></ul>

LECO SX100 Benchtop Metallographic Saw

SX100M benchtop sectioning machine delivers precise and safe cutting of metals, carbides, composites, and electronic components with a powerful motor and compact, ergonomic design.

<p><strong>The SX100M is an efficient benchtop sectioning machine designed to handle a wide range of materials and applications with precision and reliability. It is an ideal solution for sectioning bar stock, castings, fasteners, tungsten carbide, composite materials, electronic components, weldments, and more. With an approximate maximum sample cut diameter of 2.75 inches, the SX100M delivers dependable performance in a compact laboratory-friendly footprint.</strong></p><p>Equipped with a powerful 3 HP (2.2 kW) motor and a 10-inch (250 mm) blade capacity, the SX100M ensures consistent cutting results even for demanding materials. An integrated electronic mechanical braking system enhances operator safety and improves workflow efficiency.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_SX_100_Stolni_metalograficka_pila_83b2b057c2.jpg" alt="LECO: SX100 Benchtop Metallographic Saw" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_SX_100_Stolni_metalograficka_pila_83b2b057c2.jpg 158w," sizes="100vw" width="1185" height="1175"></p><h4><strong>Key Features</strong></h4><ul><li>Radial arm design for manual operation with an ergonomic, user-friendly working height</li><li>Base aluminum casting combined with a steel hood for durability and long service life</li><li>Integrated safety lock to protect the operator during sectioning</li><li>Built-in 6.6-gallon (25 L) recirculating coolant tank</li><li>Sloped interior floor for efficient coolant flow and reduced debris accumulation</li><li>Electronic mechanical braking system for rapid and safe blade stopping</li></ul><h4><strong>Models</strong></h4><h5><strong>SX100M</strong></h5><ul><li>Power supply options: 230 V or 400 V</li></ul>

LECO PX300 Manual Grinder/Polisher for Metallographic Sample Preparation

PX300 grinder/polisher delivers simple operation and reliable specimen preparation for microhardness and microstructural analysis, offering a compact and durable solution for low-volume metallography labs.

<p><strong>The PX300 Grinder/Polisher Series is designed to emphasize ease of use while consistently producing specimens that are ideal for microhardness testing and microstructural examination. Engineered as an efficient, safe, reliable, and clean solution, the PX300 is particularly well suited for lower-volume metallography laboratories that still demand high-quality, reproducible results.</strong></p><p>With a compact design and durable construction, the PX300 delivers dependable grinding and polishing performance while minimizing operator effort and routine maintenance.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_PX_300_Rucni_bruska_lesticka_pro_pripravu_metalografickeho_vzorku_2_ac80a9624c.jpg" alt="LECO: PX300 Manual Grinder/Polisher for Metallographic Sample Preparation" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_PX_300_Rucni_bruska_lesticka_pro_pripravu_metalografickeho_vzorku_2_ac80a9624c.jpg 244w," sizes="100vw" width="764" height="489"></p><h4><strong>Key Features</strong></h4><ul><li>Spiral bowl design with an automatic bowl wash system to prevent drain clogs and simplify cleanup</li><li>Emergency Stop button for immediate shutdown of grinding operations and enhanced operator safety</li><li>Rugged structural and electronic components designed to withstand demanding laboratory environments</li><li>Clean and reliable grinding/polishing performance suitable for routine metallographic preparation</li></ul><h5><strong>Optional Non-Motorized Head (available at purchase or retrofit)</strong></h5><ul><li>Enables processing of multiple samples simultaneously</li><li>Improves consistency between operators and from run to run</li><li>Enhances throughput and reproducibility in routine applications</li></ul><h4><strong>Models</strong></h4><ul><li><h5><strong>PX300 (Base Model)</strong></h5><ul><li>Power supply: 115 V or 230 V</li></ul></li><li><h5><strong>PX300 (with Non-Motorized Head)</strong></h5><ul><li>Power supply: 115 V or 230 V</li></ul></li></ul><h4><strong>Options</strong></h4><ul><li>Grinding/polishing wheel sizes:<ul><li>8 in</li><li>10 in</li><li>12 in</li><li>200 mm</li><li>250 mm</li><li>300 mm</li></ul></li></ul>

LECO PX Series Automated Metallographic Grinding and Polishing

PX400 and PX500 grinders/polishers deliver easy operation, automated workflows, and reproducible flat specimens with intuitive touch-screen control and advanced cleaning and fluid dispensing features.

<p><strong>The PX400 and PX500 grinders/polishers are designed to emphasize ease of use while consistently delivering exceptionally flat, high-quality specimens. Built with the latest technology, the PX Series provides an efficient, safe, reliable, and clean grinding and polishing solution that helps keep metallography laboratories running smoothly, even in high-throughput environments.</strong></p><p>With an intuitive software interface and a range of smart, operator-focused features, the PX400 and PX500 simplify daily grinding and polishing workflows while ensuring excellent reproducibility across a wide variety of materials and applications.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_PX_Automatizovane_metalograficke_brouseni_a_lesteni_e46f4bd31d.jpg" alt="LECO: PX Series Automated Metallographic Grinding and Polishing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_PX_Automatizovane_metalograficke_brouseni_a_lesteni_e46f4bd31d.jpg 168w," sizes="100vw" width="800" height="743"></p><h4><strong>Key Features</strong></h4><ul><li>Intuitive touch-screen software with practical tools that simplify grinding and polishing workflows</li><li>Innovative spiral bowl design with an automatic bowl wash system to prevent drain clogs and reduce cleanup</li><li>Slow wheel indexing after cycle completion for easy and safe mount removal</li><li>Individual sample mode with slow holder rotation to simplify mount loading</li><li>More than 30 proven, built-in preparation methods, with the ability to create or download additional methods</li><li>Models available for both fixed-force and individual sample preparation</li><li>Support for up to five programmable, metered fluid dispensers to deliver consistent suspensions and extenders for precise polishing results</li></ul><h4><strong>Models</strong></h4><ul><li><h5><strong>PX400A (Automated)</strong></h5><ul><li>Wheel sizes: 8 in, 10 in, 200 mm, 250 mm</li><li>Power supply: 115 V (PX400A1) or 230 V (PX400A2)</li></ul></li><li><h5><strong>PX400S (Standard)</strong></h5><ul><li>Wheel sizes: 8 in, 10 in, 200 mm, 250 mm</li><li>Power supply: 115 V (PX400S1) or 230 V (PX400S2)</li></ul></li><li><h5><strong>PX500A (Automated)</strong></h5><ul><li>Wheel sizes: 10 in, 12 in, 250 mm, 300 mm, 350 mm</li><li>Power supply: 230 V</li></ul></li></ul>

LECO MX Series Metallographic Sample Mounting Presses

MX400 and MX500 are fully automatic mounting presses with a compact design, touch-screen control, customizable methods, and dual-mount capability for fast, reliable metallographic sample preparation.

<p><strong>The MX400 and MX500 are fully automatic mounting presses designed to accelerate and simplify metallographic sample preparation. With a slim, space-saving 8-inch-wide footprint and an intuitive touch-screen interface, these systems deliver faster mounting cycles, higher throughput, and greater flexibility for a wide range of sample types and mounting materials.</strong></p><p>Both systems combine robust mechanical design with advanced process control, allowing laboratories to create reproducible, high-quality mounts while minimizing operator effort. The MX400 and MX500 are ideal solutions for laboratories looking to remove mounting bottlenecks and improve overall preparation efficiency.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_MX_Fixacni_lisy_pro_metalograficke_vzorky_3_8b3f6d935c.jpg" alt="LECO: MX Series Metallographic Sample Mounting Presses" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_MX_Fixacni_lisy_pro_metalograficke_vzorky_3_8b3f6d935c.jpg 193w," sizes="100vw" width="887" height="717"></p><h4><strong>Key Features</strong></h4><ul><li>Durable solid-steel crossbar closure design that resists wear, avoids jamming, and allows quick, one-handed operation</li><li>Easy-to-use swipe-and-touch user interface for intuitive selection of heating, cooling, and pressure parameters</li><li>Fully customizable mounting methods, with the option to use preconfigured LECO-developed methods</li><li>Variable operating modes optimized for delicate samples and compatible with all common mounting materials</li><li>Low thermal mass design enabling rapid heating and cooling for increased productivity</li><li>Full-size dual mounting capability to reduce bottlenecks and increase sample throughput</li><li>Supports mold sizes of 1.25 inch, 1.50 inch, 30 mm, 40 mm, and 50 mm</li><li>Quick and simple mold size changes on the MX500 model</li></ul><h4><strong>Models</strong></h4><ul><li><h5><strong>MX400</strong></h5><ul><li><strong>Supported mold sizes: </strong>1.25 in, 1.5 in, 30 mm, 40 mm, 50 mm</li><li><strong>Power supply: </strong>115 V or 230 V</li></ul></li><li><h5><strong>MX500</strong></h5><ul><li><strong>Supported mold sizes:</strong> 1.25 in, 1.5 in, 30 mm, 40 mm, 50 mm</li><li><strong>Power supply: </strong>115 V or 230 V</li><li>Designed for rapid and easy switching between mold sizes</li></ul></li></ul>

LECO MSX Series Metallographic Sectioning

LECO MSX Series sectioning machines provide precise, reliable cutting from small components to large hardened samples, offering robust construction, flexible fixturing, and manual or automated operation.

<p><strong>The LECO MSX Series of metallographic sectioning machines is designed to meet the needs of laboratories handling samples ranging from very small components to large, hardened parts. With robust construction, precise spindle designs, and flexible fixturing options, the MSX Series delivers reliable, accurate sectioning for routine and demanding metallographic applications.</strong></p><h4><strong>MSX205 – Compact Benchtop Sectioning Machine</strong></h4><p>The MSX205 is an ideal solution for preparing small sections such as electronic components, fasteners, and similar parts. This space-efficient benchtop system supports both linear and radial feed configurations while delivering precise, controlled sectioning.</p><h5><strong>Key Features</strong></h5><ul><li>Advanced spindle design for long service life and precise cuts</li><li>Welded steel construction suitable for demanding lab environments</li><li>Large T-slotted table for fast, flexible sample fixturing</li><li>Channeled coolant drainage to maintain high flow and reduce debris buildup</li><li>Integrated 4.2-gallon (16 L) recirculating coolant system</li><li>Optional integrated Y-table for convenient parallel sectioning</li></ul><h5><strong>Technical Highlights</strong></h5><ul><li>Blade capacity: 8 in (200 mm)</li><li>Motor power: 2.04 HP (1.5 kW), variable speed</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_MSX_Metalograficke_rezani_cc0a792e52.jpg" alt="LECO: MSX205" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_MSX_Metalograficke_rezani_cc0a792e52.jpg 183w," sizes="100vw" width="1930" height="1641"></p><h4><strong>MSX305A – Automated Sectioning for Large Samples</strong></h4><p>The MSX305A Series is engineered for sectioning large and challenging samples, including induction-hardened parts, tool steels, and carburized components. Automated oscillation and servo-pulse sectioning improve cut quality and repeatability across a wide range of materials.</p><h5><strong>Key Features</strong></h5><ul><li>Production-grade spindle supporting up to 14 in (350 mm) blades with 1.25 in (32 mm) arbor</li><li>Heavy-duty welded steel construction</li><li>Manually adjustable Y-axis table for accurate sample positioning and parallel sectioning</li><li>Optional catch basket for small sectioned samples</li><li>Large 15.75 × 15.75 in (400 × 400 mm) T-slotted table and spacious sectioning compartment</li><li>Integrated 30-gallon (115 L) coolant tank with level gauge</li><li>Sealed electronics enclosure with removable side access ports</li><li>Intuitive control panel with dual 5.6 in (142 mm) displays</li></ul><h5><strong>Control and Motion Options</strong></h5><ul><li>Z-axis for manual sectioning (MSX305A1 Series)</li><li>Joystick control for pulse sectioning, blade direction, table direction, and oscillation</li><li>Manual sectioning available on MSX305A2 Series</li></ul><h5><strong>Technical Highlights</strong></h5><ul><li>Motor power: 10.05 HP (7.5 kW)</li></ul><h4><strong>MSX305R – Manual Sectioning for Large Samples</strong></h4><p>The MSX305R Series provides a robust, manually controlled solution for sectioning large samples across a broad range of materials. Its solid construction and flexible table design make it well suited for production and research environments.</p><h5><strong>Key Features</strong></h5><ul><li>Production-grade spindle supporting up to 14 in (350 mm) blades</li><li>Welded steel construction for long-term durability</li><li>Optional catch basket for retaining small cut samples</li><li>15.75 × 15.75 in (400 × 400 mm) T-slotted table with large sectioning area</li><li>30-gallon (115 L) built-in coolant tank with level indicator</li><li>Sealed electronics enclosure with removable side ports</li><li>Easy-to-use control panel</li><li>Z-axis locking feature</li><li>Handwheel-driven X- and Y-table for longitudinal sectioning and precise positioning</li></ul><h4><strong>MSX432 – High-Power Sectioning for Hardened and High-Alloy Materials</strong></h4><p>The MSX432 Series is designed for demanding applications involving large, hardened, or high-alloy materials. Short contact times combined with intense cooling provide true cold-cutting performance, preserving microstructural integrity for metallographic examination.</p><h5><strong>Key Features</strong></h5><ul><li>Advanced spindle design for precise, long-life operation</li><li>Heavy-duty welded steel construction for production environments</li><li>Large T-slotted table for versatile sample fixturing</li><li>Channeled coolant drainage for high flow rates and minimal debris accumulation</li><li>Integrated Y-table for accurate parallel sectioning</li><li>Isolated table design to prevent contamination of linear slides</li><li>High-capacity 39-gallon (150 L) recirculating coolant system</li></ul><h5><strong>Technical Highlights</strong></h5><ul><li>Blade capacity: 17 in (431.8 mm)</li><li>Motor power: 20.1 HP</li></ul>

Products from category Sample preparation - page 1

Related content

News from LabRulezICPMS Library - Week 14, 2026

Mastering Qtegra Software: Practical Strategies to Improve Your Daily Lab Workflow

Performance Assessment of Binary Output Examinations in Medical Laboratories