<p><strong>Scientists at IOCB Prague are uncovering new details of gene transcription. They have identified a previously unknown molecular mechanism by which the transcription of genetic information from deoxyribonucleic acid (DNA) into ribonucleic acid (RNA) can be initiated. The researchers focused on a specific class of molecules known as alarmones, which are found in cells across a wide range of organisms and whose levels often increase under conditions of cellular stress. The results were published in the prestigious scientific journal </strong><i><strong>Nature Chemical Biology</strong></i><strong>.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Hana Cahová, head of the Chemical Biology of Nucleic Acids research group." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_bc2bfffa6c.jpg 234w," sizes="100vw" width="2000" height="1335"></p><div><p>Molecules of ribonucleic acid can carry a variety of chemical modifications at one end, known as caps. In eukaryotic organisms, including human cells, the best-known cap plays an important role in RNA stability and in regulating its subsequent fate. In recent years, however, it has become clear that alternative, non-canonical RNA caps also exist, although their formation and the mechanisms by which they are attached to RNA remain only partially understood. These include alarmone caps, formed by dinucleoside polyphosphate molecules, that protect cellular RNA at moments when the cell is under threat.</p><p>In their study,<strong> </strong><a target="_blank" rel="noopener noreferrer" href="https://cahova.group.uochb.cz/en"><strong>Dr. Hana Cahová</strong></a> and colleagues examined bacterial RNA polymerase and investigated how this enzyme can initiate transcription using dinucleoside polyphosphates (NpNs) instead of the standard RNA building blocks. For the first time, the scientists described, at the atomic level, how RNA bearing an alarmone cap can be generated directly at the initiation of gene transcription. They also observed that NpNs bind through a different type of base pairing than is typically observed.</p><p>The work was significantly shaped by <strong>Valentina Serianni from Hana Cahová’s team</strong>, who demonstrated the ability of dinucleoside polyphosphates to initiate gene transcription, and by <strong>Jana Škerlová</strong>, who focused on the structural analysis of RNA polymerase. Using cryogenic electron microscopy data, she showed how dinucleoside polyphosphate molecules bind within the active site of RNA polymerase – that is, the core of the enzyme where genetic information is transcribed. Together, their findings help to elucidate the processes that accompany the transcription of genetic information from DNA to RNA.</p><p>Hana Cahová adds: <i>“We’re describing something that truly occurs in cells and that we’re now able to observe directly at the level of individual molecules. This allows us to answer fundamental questions about cellular processes, such as how cells adapt to stress. RNA plays a central role in this, as it carries the cascade of information underlying any cellular response – for example, to threatening conditions caused by nutrient deprivation or temperature shock.”</i></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg" alt="IOCB Prague/Tomáš Belloň: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: Dr. Tomáš Kouba, head of the Cryogenic Electron Microscopy core facility." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_2_0fe88ff9e9.jpg 234w," sizes="100vw" width="2000" height="1335"></p><div><p>Cryogenic electron microscopy (cryo-EM) was central to the project. This part of the work was led by<strong> Dr. Tomáš Kouba</strong>, one of the authors of the study. <i>“Cryogenic electron microscopy allows us to freeze biological molecules in a state very close to their natural form and then determine their three-dimensional structure. This makes it possible to look directly into the active centers of enzymes and observe their function down to the atomic level,”</i> he explains.</p><p>Last year, IOCB Prague opened a new <a target="_blank" rel="noopener noreferrer" href="https://cryoem.group.uochb.cz/en"><strong>cryo-EM center</strong></a><strong> </strong>that is unique within the Czech research environment. State-of-the-art cryogenic electron microscopes are housed in a specially designed building and enable the study of biological processes with exceptional structural precision.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg" alt="IOCB Prague: Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription: This work shows how NpnNs initiate bacterial transcription. Cryo-EM reveals how nucleobases pair with the template: one in canonical and one in reverse Watson–Crick mode, providing a structural basis for their function as non-canonical RNA caps." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Vyzkum_z_UOCHB_odhaluje_dosud_nepoznany_zpusob_prepisu_geneticke_informace_3_4d881e7a58.jpg 245w," sizes="100vw" width="2000" height="1077"></p><blockquote><h4><strong>The Original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://www.nature.com/articles/s41589-025-02134-5"><strong>Molecular insight into 5′ RNA capping with Np<sub>n</sub>Ns by bacterial RNA polymerase</strong></a></h4><p>Valentina M. Serianni, Jana Škerlová, Anna Knopp Dubánková, Anton Škríba, Hana Šváchová, Tereza Vučková, Anatolij Filimoněnko, Milan Fábry, Pavlína Řezáčová, Tomáš Kouba &amp; Hana Cahova&nbsp;</p><p>Nat. Chem. Biol. 21 (2026)</p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1038/s41589-025-02134-5">https://doi.org/10.1038/s41589-025-02134-5</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><h4><strong>Abstract</strong></h4><p>RNA capped with dinucleoside polyphosphates has been discovered in bacteria and eukaryotes only recently. The likely mechanism of this specific capping involves direct incorporation of dinucleoside polyphosphates by RNA polymerase as noncanonical initiating nucleotides. However, how these compounds bind into the active site of RNA polymerase during transcription initiation is unknown. Here, we explored transcription initiation in vitro, using a series of DNA templates in combination with dinucleoside polyphosphates and model RNA polymerase from <i>Thermus</i> <i>thermophilus</i>. We observed that the transcription start site can vary on the basis of the compatibility of the specific template and dinucleoside polyphosphate. Cryo-electron microscopy structures of transcription initiation complexes with dinucleoside polyphosphates revealed that both nucleobase moieties can pair with the DNA template. The first encoded nucleotide pairs in a canonical Watson–Crick manner, whereas the second nucleobase pairs noncanonically in a reverse Watson–Crick manner. Our work provides a structural explanation of how dinucleoside polyphosphates initiate RNA transcription.</p></div></div>

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription

<p><strong>In the week from February 9, the following webinars await you in the field of atomic and molecular spectroscopy and spectrometry</strong></p><blockquote><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4><p><strong>👉 Search and filter in the largest global database</strong> with over <strong>5 000 GC, LC, MS and spectroscopy webinars</strong>.</p></blockquote><h5><strong>1. Thermo Fisher Scientific: Process Raman – A Reliable and Versatile Tool for Downstream Process Monitoring and Control for mAb Production</strong></h5><ul><li>Tu, 10.2.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5808">Registration</a></li></ul><p>The presentation highlights how process Raman spectroscopy offers several advantages over traditional in-line UV-Vis analysis for process monitoring and metabolite production control.</p><h5><strong>2. Bruker: Meet Compact-Q DEER Spectrometer – Your Gateway to Quantum Innovation</strong></h5><ul><li>Tu, 10.2.2026 17:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5757">Registration</a></li></ul><p>Discover how the Compact-Q DEER spectrometer enables high-fidelity qubit characterization and control, combining advanced microwave architecture, AWGs, and cryogen-free operation.</p><h5><strong>3. Agilent Technologies: Novel Advancements in Trace Level Determination and Long-Term Stability of Metals in TMAH and UPW Matrices</strong></h5><ul><li>Tu, 10.2.2026 21:30 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/3733">Registration</a></li></ul><p>Explore novel approaches for trace-level metal determination and long-term stability assessment in TMAH and ultrapure water matrices.</p><h5><strong>4. AZoM: From First to Best – Introducing the Litesizer DIF Series</strong></h5><ul><li>We, 11.2.2026 15:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5765">Registration</a></li></ul><p>Join this live webinar introducing the new Litesizer DIF series of laser diffraction particle size analyzers.</p><h5><strong>5. Anton Paar: Polymer Rheology – Rotational and Transient Measurements on a Polymer Melt</strong></h5><ul><li>We, 11.2.2026 18:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5786">Registration</a></li></ul><p>Learn how rotational and transient viscosity measurements on rotational rheometers reveal polymer melt flow behavior, from method setup and accessories to data interpretation.</p><h5><strong>6. Milestone: Practical Guidance to Improve the Journey from Sample to Heavy Metals Analysis for Environmental Labs</strong></h5><ul><li>Th, 12.2.2026 16:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/5803">Registration</a></li></ul><p>Improve heavy metals analysis in environmental laboratories with practical tips on reagents, filtration, cleaning, and workflow optimization to enhance data quality and efficiency.</p><h5><strong>7. Agilent Technologies: Moving from R&amp;D and Limited QC on a UV-Vis-NIR Instrument to Large-Scale QC Using an Autosampler</strong></h5><ul><li>Th, 12.2.2026 20:00 CET</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/webinar/2104">Registration</a></li></ul><p>This presentation covers key aspects of adding and using an autosampler to maximize UV-Vis-NIR QC workflows when scaling from R&amp;D to routine quality control.</p>

Webinars LabRulezICPMS Week 07/2026

<p><strong>LA-ICP-MS imaging, particularly in TOF mode, provides rapid, high-resolution elemental maps of complex geological materials, but quantitative accuracy is often limited by heterogeneous mineralogy. This study introduces a workflow using UMAP for unsupervised dimensionality reduction combined with k-means clustering to segment mineral phases directly from per-pixel elemental data.</strong></p><p>Cluster compositions are matched to known minerals based on stoichiometry, allowing phase-specific normalization and reducing quantification errors by up to 60%. Validated on dawsonite-bearing sandstones, the approach enables consistent phase-resolved geochemical comparisons across depth profiles and establishes UMAP as a practical tool for accurate, interpretable multielement imaging.</p><blockquote><h4><strong>The original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05398"><strong>Mineral Phase-Resolved Quantification in LA-ICP-MS Imaging</strong></a></h4><p>Barbara Umfahrer, Jakub Buday, Pavel Pořízka, Jozef Kaiser, Paolo S. Garofalo*, and Detlef Günther*</p><p>Anal. Chem. 2026, 98, 1, 581–589</p><p><a target="_blank" rel="noopener noreferrer" href="https://doi.org/10.1021/acs.analchem.5c05398">https://doi.org/10.1021/acs.analchem.5c05398</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><p><strong>Selected sections from the article follow. Formats and hyperlinks were adapted from the original.</strong></p><p>Since its introduction in 1985, <a href="javascript:void(0);">(1)</a> Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) has matured into a routine technique for both qualitative and quantitative elemental analysis, finding use in diverse fields such as geology, <a href="javascript:void(0);">(2−4)</a> biology, <a href="javascript:void(0);">(5,6)</a> materials science, <a href="javascript:void(0);">(7)</a> and cultural heritage. <a href="javascript:void(0);">(8,9)</a> Especially in comparison to liquid analysis techniques, the method excels through minimal sample preparation, negligible sample destruction, and low limits of detection, which enable trace element analysis. However, besides the availability of standard reference materials, a longstanding challenge of quantitative LA-ICP-MS is the need for a suitable internal standard to account for variations in ablation rate and transport efficiency, as well as instrumental drift. <a href="javascript:void(0);">(10)</a> Developed for applications in geological matrices, this requirement was elegantly circumvented by Liu et al. <a href="javascript:void(0);">(11)</a> through 100 wt % normalization, which assumes that all detected elements form oxides summing up to 100 wt %. This approach was conceptually inspired by the summed-spectrum normalization calibration procedure introduced by Leach and Hieftje in 2000, which emphasized the use of total signal intensities for robust internal standardization. <a href="javascript:void(0);">(12)</a> The 100 wt % normalization strategy was subsequently extended to the bulk analysis of carbonates. <a href="javascript:void(0);">(13)</a></p><p>Concurrently, the advent of time-of-flight (TOF) mass analyzers and the development of fast-washout laser ablation cells <a href="javascript:void(0);">(14−16)</a> have transformed LA-ICP-MS into a powerful imaging tool, capable of generating spatial maps across a variety of sample matrices at high data acquisition rates. <a href="javascript:void(0);">(17−19)</a> Furthermore, in comparison to, e.g., X-ray fluorescence spectroscopy (XRF) or Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS), LA-ICP-MS offers a high depth resolution of approximately 0.2 μm on glass, enabling precise measurement of fine-scale structures not only laterally but also in depth. <a href="javascript:void(0);">(18)</a> However, as the volume and complexity of these elemental images have grown according to the progressive advancement of the method itself, now consisting of gigabytes of data produced within minutes, manual data interpretation has become increasingly impractical. To uncover meaningful details and patterns, researchers have applied multivariate methods such as Principal Component Analysis (PCA) and k-means clustering to reduce dimensionality and delineate distinct regions within the images. <a href="javascript:void(0);">(20−23)</a> The nonlinear dimensionality reduction technique Uniform Manifold Approximation and Projection (UMAP), <a href="javascript:void(0);">(24)</a> which supports data interpretation with its capability to capture and separate subtle local structures, has first been employed to LA-ICP-MS bulk analysis data in 2024, where it was used to classify pyrite samples and discriminate between Pb and Zn deposit types. <a href="javascript:void(0);">(25,26)</a> In combination with elemental imaging, UMAP has recently been applied to biological tissue data sets as an exploratory analysis tool, <a href="javascript:void(0);">(27)</a> further enhancing the ability to visualize and interpret complex elemental distributions.</p><p>Despite these advances, no existing approach combines the unsupervised segmentation of mineral phases by UMAP with phase-specific normalization. In this study, we introduce a UMAP-driven workflow that (1) automatically segments distinct mineralogical phases within fine-grained geological matrices and (2) applies phase-specific 100 wt % normalization (e.g., oxide <a href="javascript:void(0);">(11)</a> or carbonate <a href="javascript:void(0);">(13)</a>), thereby improving quantification accuracy and enabling phase-specific quantitative interpretation of mineral distributions in complex matrices.</p><h4><strong>Materials and Methods</strong></h4><h5><strong>LA-ICP-TOFMS Imaging</strong></h5><p>LA-ICP-TOFMS analyses were performed using a 193 nm ArF excimer laser (GeoLas C, Lambda Physik, Göttingen, Germany) coupled to an ICP-TOFMS instrument (icpTOF 2R, TOFWERK AG, Thun, Switzerland). Ablation was conducted in the modified parallel flow ablation cell (MPFAC) <a href="javascript:void(0);">(16,34)</a> under a He atmosphere (99.999%, Linde Gas Schweiz AG, Dagmersellen, Switzerland) with Ar (99.996%, Linde Gas Schweiz AG) used as the carrier gas. A piezoelectrically driven xyz translational stage (1 nm resolution, SmarAct GmbH, Oldenburg, Germany) enabled precise sample positioning. Laser, stage movement, and ICP-TOFMS data acquisition were synchronized using a custom-built imaging control system. <a href="javascript:void(0);">(19)</a> The system was optimized each day based on maximum sensitivity while ensuring a <sup>238</sup>U<sup>+</sup>/<sup>232</sup>Th<sup>+</sup> intensity ratio of 1.0 to 1.1 on NIST SRM 610 and a <sup>232</sup>Th<sup>16</sup>O<sup>+</sup>/<sup>232</sup>Th<sup>+</sup> rate of below 0.5%.</p><h5><strong>LIBS Imaging</strong></h5><p>The LIBS analyses were performed on a Firefly system (Lightigo, Czech Republic). The laser (1064 nm, 5 mJ, pulse duration ∼10 ns, diameter 6 mm, operating at 50 Hz) was focused on the sample with a singlet lens (focal length 50 mm) to a 30 μm spot. The spatial resolution of the acquired elemental maps, with a size of about 16 mm × 26 mm, was 20 μm. Plasma radiation is collected by a multifiber configuration with a collimator and an optical fiber (400 μm core diameter), which delivered the light to several Czerny–Turner spectrometers (resolution 0.25–0.4 nm). The spectral range of the spectrometers is 180–850 nm. The radiation is collected 1.5 μs after ablation, with a gate width of 15 μs.</p><p>Data processing was done with Python 3.11.8 in the Spyder environment and included background correction and per-pixel z-score normalization.</p><h4><strong>Results and Discussion</strong></h4><h5><strong>LIBS and XRD Measurements</strong></h5><p>To assess whether carbonate-based normalization <a href="javascript:void(0);">(13)</a> is warranted, first, large-scale LIBS elemental intensity maps of the samples across about a third of the thin sections were acquired. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05398#fig1">Figure 1</a> reveals the results for “Layer 2” of the Poggio del Gatto sandstone for selected elements. A complete mapping of all four thin sections can be found in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05398/suppl_file/ac5c05398_si_001.pdf">Figures S3 and S6</a> in the Supporting Information. The maps reveal that C is strongly enriched in fracture veins as well as in finer-grained domains within the matrix and correlates with Ca, indicating carbonate minerals rather than oxides. Bulk XRD analysis identifies calcite alongside quartz, plagioclase, white mica, and kaolinite. These complementary observations confirm calcite as a major phase and thus justify the need for performing the 100 wt % normalization on a carbonate basis for pixels representing calcite.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2026_98_1_581_589_Figure_1_LIBS_elemental_intensity_maps_of_the_data_set_from_Layer_2_of_the_Poggio_del_Gatto_sandstone_mounted_on_a_microscope_slide_73ada1b7b8.jpg" alt="Anal. Chem. 2026, 98, 1, 581–589: Figure 1. LIBS elemental intensity maps of the data set from “Layer 2” of the Poggio del Gatto sandstone mounted on a microscope slide, depicting calcite veins and fine-grained structures within the matrix, underlining the need for carbonate-based normalization for specific pixels. Emission lines for evaluation are shown in the corresponding subfigure title. The epoxy used to fix the thin section on the slide is visible along the margin." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2026_98_1_581_589_Figure_1_LIBS_elemental_intensity_maps_of_the_data_set_from_Layer_2_of_the_Poggio_del_Gatto_sandstone_mounted_on_a_microscope_slide_73ada1b7b8.jpg 245w," sizes="100vw" width="2088" height="414"></p><h5><strong>Renormalization Based on Carbonates</strong></h5><p>Applying an oxide-based normalization to carbonate samples will introduce composition-dependent biases that cannot immediately be generalized as a singular numerical value. The difference between the molecular masses of carbonate CO<sub>3</sub><sup>2–</sup> and its oxide equivalent O<sup>2–</sup> yields an intrinsic bias on the order of a factor of about two, depending on the stoichiometry. Once this data is renormalized to a total of 100 wt %, the magnitude of the error becomes highly dependent on the specific elemental composition of the sample. An exemplary calculation illustrating this effect for a representative calcite pixel is provided in <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/suppl/10.1021/acs.analchem.5c05398/suppl_file/ac5c05398_si_001.pdf">Table S2</a>, yielding a relative error of 79%. In practice, this error varies across the image according to the local phase composition. <a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acs.analchem.5c05398#fig6">Figure 6</a> illustrates the impact of normalization approaches for layer 2 of the samples as well as the spatial distribution of the resulting relative error. The figure presents Ca and Si elemental maps in two rows, while the first three columns compare different normalization strategies: normalization based on all oxides, normalization based on all carbonates, and a pixel-wise normalization guided by mineral phase identification, as outlined in the workflow proposed in this study. The final column displays the relative error between the bulk oxide- or carbonate-based normalization and the pixel-wise, phase-informed normalization.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Anal_Chem_2026_98_1_581_589_Figure_6_Comparison_of_normalization_strategies_for_Ca_and_Si_LA_ICP_TOFMS_elemental_maps_in_Layer_2_ce3a0c1a5c.jpg" alt="Anal. Chem. 2026, 98, 1, 581–589: Figure 6. Comparison of normalization strategies for Ca and Si LA-ICP-TOFMS elemental maps in “Layer 2” of the Poggio del Gatto sandstone. Rows show Ca (top) and Si (bottom); columns compare (1) oxide-based normalization, (2) carbonate-based normalization, (3) pixel-wise, phase-informed normalization (this study), and (4) relative error between the first two and the phase-informed approach." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Anal_Chem_2026_98_1_581_589_Figure_6_Comparison_of_normalization_strategies_for_Ca_and_Si_LA_ICP_TOFMS_elemental_maps_in_Layer_2_ce3a0c1a5c.jpg 202w," sizes="100vw" width="2088" height="1622"></p><p>For Ca (in this matrix primarily associated with calcite, a dominant carbonate phase in our samples), the relative error depicted quantifies the effect of applying oxide-based normalization across the entire image. This results in a systematic overestimation of the Ca concentration by approximately 60%. Conversely, for Si─in this matrix found mainly in quartz and various plagioclase phases─the error is shown for applying carbonate-based normalization across an oxidic matrix. In such cases, the Si concentrations are underestimated by roughly 10% to 40%, depending on the mineral phase.</p><p>These findings highlight that using a single normalization scheme across heterogeneous samples introduces substantial quantification errors. To mitigate this, the pixel-wise phase segmentation enabled by the proposed UMAP-based workflow offers a significant advantage, especially in fine-grained matrices. In short, phase-aware, pixel-wise normalization combines the strengths of both normalization approaches and proves to be highly beneficial.</p><h4><strong>Conclusion</strong></h4><p>This study demonstrates that phase-specific normalization, guided by unsupervised phase segmentation of LA-ICP-MS images, can substantially improve the accuracy of elemental quantification in fine-grained geological matrices. Rather than relying on a single global assumption (e.g., all oxides or all carbonates), the workflow adapts normalization to the actual mineralogy, minimizing systematic errors and enabling phase-resolved geochemical interpretation.</p><p>The segmentation step, based on UMAP embedding and <i>k</i>-means clustering, is fully unsupervised. However, the subsequent matching of clusters to specific minerals still relies on a limited set of preidentified stoichiometries and is therefore not yet fully unsupervised. Expansion to larger stoichiometric databases could help overcome this limitation and move toward automated mineral classification. A key challenge remains the similarity of cation ratios in certain mineral groups, which may still require complementary data to ensure robust assignments.</p><p>Overall, beyond the specific case of the Poggio del Gatto sandstone presented in this study, this work provides a framework for quantitative elemental imaging of complex geological samples and is readily transferable to other contexts that require spatially resolved composition-aware normalization. This contribution adds a practical implementation to a growing literature that already uses multivariate statistics to unlock the immense information depth of LA-ICP-TOFMS.</p>

Mineral Phase-Resolved Quantification in LA-ICP-MS Imaging

Article

Webinars

Scientific article

Science and research

Video

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer

Perform both basic and complex analyses with the Thermo Scientific™ GENESYS™ 30 Visible Spectrophotometer, an intuitive, reliable solution for education or in the lab.

<h3><strong>Designed for Users, Designed for Results</strong></h3><p><strong>The Thermo Scientific ™ GENESYS ™ 30 is the most thoughtfully designed spectrophotometer available today. Its high resolution color display, large sample compartment, and data export options meet modern expectations for students, educators and lab technicians. The GENESYS 30 blends the simplicity to satisfy novice students with the capabilities that labs need for accurate quantitative analysis.</strong></p><h4><strong>System Benefits:</strong></h4><ul><li>Large sample compartment with front access simplifies sample handling</li><li>High resolution color display</li><li>Outstanding durability in challenging environments thanks to:</li><li>Waterproof screen</li><li>Sealed, rubberized keypad</li><li>Removable, washable sample compartment</li><li>Sloping surfaces that shed spills</li><li>Chemical resistant PC-ABS covers</li><li>3A linear measurement range for concentrated solutions</li><li>Multi-point quant offers higher measurement confidence</li><li>Traditional monochromator paired with advanced electronics delivers outstanding stability</li><li>Scan mode for spectral analysis and interpretation</li><li>Data any way you want it - excellent snap-on thermal printer or USB data export</li><li>Expanded capabilities with optional VISIONlite software</li><li>2-year warranty</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_4_4442fcccc5.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_4_4442fcccc5.jpg 195w," sizes="100vw" width="2103" height="1685"></p><h3><strong>Modern Power meets Traditional Simplicity</strong></h3><h4><strong>Live Display and Concentration Mode</strong></h4><p>Replicate the familiar display of absorbance or transmittance, and single standard concentration measurements of prior generation instruments in the GENESYS 30 Live Display mode. All your parameters are set and kept in view on a single screen as the calculated concentration updates every two seconds.</p><h4><strong>Fixed Mode</strong></h4><p>Apply a factor to an absorbance measurement at one wavelength, or measure at two wavelengths with two factors and perform addition, subtraction or division of the values. Display results for up ten samples then print, save or clear your data before going on to the next sample series.</p><h4><strong>Quantitative Analysis with up to Six Standards</strong></h4><p>Go beyond the basic spectrophotometer by recording and storing up to six standards to calibrate your method. Choose a linear fit with an intercept or forced through zero. Name and save your method on the instrument or back it up to a USB memory device. All data are recorded with an index number (S1 – S10) and a time stamp. The result table accommodates up to ten samples for you to print or save before going on to the next sample series or analysis.</p><h4><strong>Go negative!</strong></h4><p>Some methods call for blanking the instrument on a dark standard and reading absorbance in the negative range. Most single beam instruments cannot measure below -0.3A. GENESYS 30 uses advanced signal processing to deliver stable, reliable results down to -3A.</p><h4><strong>Simple to Sophisticated:</strong></h4><p>The GENESYS 30 has the flexibility to perform routine analysis one minute and complex analytical methods the next. The custom Analyzer mode enables you to build your formula with up to six wavelengths, six factors, standard arithmetic operators and absorbance values raised to the 2nd or 3rd power. Use the included Windows® application to design your method. Transfer the method to your GENESYS 30 and run it with the touch of a button. Analyzer mode shows your method name and a continuous display of your results. Technicians can write the result down or print it with a time stamp using the printer accessory.</p><h4><strong>Smarter by Design:&nbsp;</strong></h4><p>GENESYS 30 offers the convenient SmartStart™ feature that has delighted GENESYS 10S users since its introduction. The SmartStart menu gives you direct access to your<strong> 12 favorite methods</strong>. Allowing you to work smarter, not harder.</p><h4><strong>Snap on Printer:&nbsp;</strong></h4><p>Fast and clear printing when you need it. Add printing capability to your instrument. The snap-on thermal printer installs<br>in moments.&nbsp;</p><h4><strong>Quick and Simple Lamp Replacement:&nbsp;</strong></h4><p>No need to remove the cover, just loosen two screws, slide out the old lamp fitting and slide a new one back in. Everything is pre-aligned, just let the new lamp warm up and go back to work.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_3_82082740d3.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer: Quick and simple lamp replacement." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_3_82082740d3.jpg 197w," sizes="100vw" width="1737" height="1376"></p><h3><strong>At Home in the Instructional Laboratory</strong></h3><p><strong>GENESYS spectrophotometers are core teaching instruments in chemistry and biology laboratories around the world. The Thermo Scientific™ GENESYS™ 30 allows students and teachers to focus on examining scientific data and learning scientific concepts instead of learning instrumentation.</strong></p><h4><strong>Easy to Teach, Easy to Learn&nbsp;</strong></h4><p>Clearly labeled, uniquely colored keys simplify instrument operation. New users require little or no training.</p><h4><strong>Get Working – Faster!</strong></h4><p>Large, color digital screen and numeric keypad help you set up methods faster. Simplified software interface gives users maximum control and efficiency.</p><h4><strong>Designed for Today, Built for Tomorrow – Inside and Out!</strong></h4><p>On the inside, GENESYS 30 uses advanced optics, electronics and signal processing to deliver superior measurement performance for its class. On the outside, GENESYS 30 presents a tough exterior built to last for years in the most demanding environments.</p><ul><li>Resistant to spills</li><li>Removable and washable sample compartment</li><li>The sample compartment lid<ul><li>stays where you put it - open or closed</li><li>has a magnetic latch to hold it closed during measurements</li><li>is customer-replaceable should it get broken through abuse</li></ul></li></ul><h4><strong>Simple and Familiar</strong></h4><p>Open the Live Display application with a single button-press to monitor the absorbance or transmittance live – just like a GENESYS 20 or SPECTRONIC 20. The spectrum indicator shows the color of light being absorbed.</p><h4><strong>Special support for OD 600 and test-tube measurements</strong></h4><p>For measurements in test-tubes, the test-tube holder accessory accommodates 100mm x 13mm test-tubes with the lid closed. Or add the tall test-tube adaptor to use larger diameter, taller tubes (up to 150mm, 6 inches) with the lid open. Special OD600 mode for cell growth measurements. Select it from the Home menu and go! No method setup required.</p><h4><strong>Scanning: Simple and Fast</strong></h4><p>Find peaks in the spectrum of your sample by scanning across the spectrum in any range from 325nm to 1100nm with 1nm precision and noise-free peaks up to 3A. Use the cursor and zoom controls to identify λ<sub>max</sub>.</p><h4><strong>Data you can use</strong></h4><ul><li>Print your scan and stick it into a lab notebook using the printer accessory and optional self-stick printer paper.</li><li>Save the data points of your scan to a USB memory device and load the data into a spreadsheet or graphing program for optimal reporting.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_Genesys_30_USB_stick_A_c45fd86787.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer: USB stick." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_Genesys_30_USB_stick_A_c45fd86787.jpg 181w," sizes="100vw" width="543" height="469"></p><h3><strong>VISIONlite Software</strong></h3><p><strong>For users who need the power of computerized data analysis, optional Thermo Scientific™ VISIONlite™ software pairs a simple user</strong><br><strong>interface with a wider range of options for experiment design and data analysis.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific - Genesys spectrophotometers: VISIONlite Software." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h4><strong>Scan Application:</strong></h4><ul><li>Automated peak pick and label</li><li>Overlay spectra and print the results</li></ul><h4><strong>Kinetics Application:</strong></h4><ul><li>Data intervals as low as 1 second</li><li>Enzyme rate calculation with factor</li></ul><h4><strong>Quantitative Analysis:</strong></h4><ul><li>Up to 100 standards</li><li>Linear, quadratic or cubic data fits</li></ul><h4><strong>Performance Verification:</strong></h4><ul><li>Full suite of tests to verify performance of your instrument</li><li>Pre-loaded pass/fail limits specific to your instrument</li></ul><h3><strong>GENESYS 30 Accessories</strong></h3><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_59d912ddd3.jpg" alt="Thermo Scientific™ GENESYS™ 30 Vis Spectrophotometer: GENESYS 30 Accessories." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_GENESYS_30_Vis_Spectrophotometer_59d912ddd3.jpg 243w," sizes="100vw" width="1444" height="929"></p><h3><strong>GENESYS 30 Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> &lt;0.003 A, 325 to 1000 nm smoothed</li><li><strong>Compartments:</strong>&nbsp;<ul><li>Accessible from top, front or side</li><li>Able to accommodate cells up to 100mm pathlength</li><li>Available accessory for test-tubes up to 25mm diameter and 150mm height</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li></ul></li><li><strong>Connections:</strong> USB-A, USB-B</li><li><strong>Description:</strong> GENESYS 30 VIS Spectrophotometer with EU Power Cable</li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> &lt;0.002 A/hr. (At 500 nm after 2 hr. warmup.) Typical &lt;0.004 A/hr. after 1 hr. warmup</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/250 V, 50/60 Hz</li><li><strong>Keypad:</strong> Tactile rubber 23 keys with numeric keypad</li><li><strong>Lamp Life:</strong> 1000 hrs.</li><li><strong>Noise:</strong> (RMS at 500nm. 60 consecutive measurements)<ul><li>≤0.001A at 0A</li><li>≤0.001A at 1A</li><li>≤0.002A at 2A</li></ul></li><li><strong>Optical Design:</strong> Single Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002 A (0 to 0.3 A), 0.5% of ABS reading (0.301 A to 2.5 A)</li><li><strong>Photometric Display:</strong> -3A to +3A, 0 to 200 000 %T, 0 to 9 999 999 C</li><li><strong>Photometric Range:</strong> -3A to +3A</li><li><strong>Photometric Repeatability:</strong> ± 0.002 A (Measured at 1.0 A at 546 nm)</li><li><strong>Printer Included:</strong> Thermal printer accessory with 80 mm width paper</li><li><strong>Scan Speed:</strong> Automatic – up to 1200 nm/min.</li><li><strong>Stray Light:</strong> &lt;0.1%T at 340 nm and 400 nm</li><li>Measured using glass cutoff filters or NaNO₂ at 340 nm</li><li><strong>Warranty:</strong> 2 years standard with 1 year extension upon registration of the instrument with Thermo Fisher Scientific within 6 months of purchase</li><li><strong>Wavelength Accuracy:</strong> ±2 nm</li><li><strong>Wavelength Data Interval:</strong> 1 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±1 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Silicon Photodiode</li><li><strong>Display:</strong> 5 in. 32-bit Color Display, 800 x 480 pixels</li><li><strong>Languages:</strong> English, French, German, Spanish, Italian, Portuguese, Russian, Chinese, Japanese, Korean, Thai, Arabic</li><li><strong>Wavelength Range:</strong> 325 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 40 Vis Spectrophotometer

Perform routine measurements for quality control or teaching in the chemistry classroom with rugged Thermo Scientific™ GENESYS 40 Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 40 Vis Spectrophotometer</strong></h3><p><strong>For teaching labs, research labs and industrial QC requiring robust construction, ease-of-use and software capability.</strong></p><h5><strong>Advanced usability, modern functionality</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_Genesys_40_Kyveta_A_7955a6a01a.jpg" alt="Thermo Scientific™ GENESYS™ 40 Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_Genesys_40_Kyveta_A_7955a6a01a.jpg 234w," sizes="100vw" width="1536" height="1024"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific GENESYS Spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 40 Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.005 A</li><li><strong>Compartments:</strong>&nbsp;<ul><li>Accessible from top, front or side</li><li>Able to accommodate cells up to 100mm cells</li><li>Available accessory for test tubes up to 25 mm diameter and 150 mm height</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available&nbsp;</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0010 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> GENESYS 40 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt;1000 hrs.</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002 A at 0.5 A, ±0.004 A at 1.0 A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –3A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001A at 1A measured at 1.0A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Automatic – up to 1800 nm/min.</li><li><strong>Stray Light:</strong> &lt;0.05%T at 340 nm and 400 nm</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Fixed, 800 x 1280 pixels</li><li><strong>Light Source:</strong> Tungsten Halogen</li><li><strong>Spectral Bandwidth:</strong> 5 nm</li><li><strong>Wavelength Range:</strong> 325 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 140 Vis Spectrophotometer

Perform quantitative measurements in routine industrial QA/QC or university chemistry labs with the automated and network-capable Thermo Scientific™ GENESYS 140 Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 140 Vis Spectrophotometer</strong></h3><p><strong>For advanced teaching labs, R&amp;D, research and life science applications requiring higher throughput or temperature control.</strong></p><h5><strong>Elite performance, enhanced capabilities</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_140_titul_B_bd2a19cbcb.jpg" alt="Thermo Scientific GENESYS Spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_140_titul_B_bd2a19cbcb.jpg 225w," sizes="100vw" width="516" height="358"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific: Genesys spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 140 Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.005 A</li><li><strong>Compartments:</strong> Accommodates (optional):<ul><li>8-position cell changer</li><li>4-position cell changer (long path cells)</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available&nbsp;</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0010 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> Genesys 140 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt;1000 hrs.</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0 A±0.008 A at 2.0A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –3A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Automatic – up to 1800 nm/min.</li><li><strong>Stray Light:</strong> &lt;0.05%T at 340 nm and 400 nm</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Tiltable, 800 x 1280 pixels</li><li><strong>Light Source:</strong> Tungsten Halogen</li><li><strong>Spectral Bandwidth:</strong> 5 nm</li><li><strong>Wavelength Range:</strong> 325 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 50 UV-Vis Spectrophotometer

Perform routine measurements for quality control or teaching in the chemistry classroom with rugged Thermo Scientific™ GENESYS 50 UV-Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 50 UV-Vis Spectrophotometer</strong></h3><p><strong>For teaching labs, research labs and industrial QC requiring robust construction, ease-of-use and software capability.</strong></p><h5><strong>Advanced usability, modern functionality</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_Genesys_50_Kyveta_bae9677ae0.jpg" alt="Thermo Scientific™ GENESYS™ 50 UV-Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_Genesys_50_Kyveta_bae9677ae0.jpg 188w," sizes="100vw" width="534" height="443"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific GENESYS Spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 50 UV-Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.002 A</li><li><strong>Compartments:</strong>&nbsp;<ul><li>Accessible from top, front or side</li><li>Able to accommodate cells up to 100 mm cells</li><li>Available accessory for test-tubes up to 25 mm diameter and 150 mm height</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0005 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> GENESYS 50 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt; 5 years typical, 3 years guaranteed</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –2A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Slow, medium and fast – up to 1600 nm/min.</li><li><strong>Stray Light:</strong> &lt; 1.0%T 198 nm (KCl) , &lt;0.05%T at 220 nm (NaI), &lt;0.03%T at 340 nm (NaNO<sub>2</sub>)</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Fixed, 800 x 1280 pixels</li><li><strong>Spectral Bandwidth:</strong> 2 nm</li><li><strong>Wavelength Range:</strong> 190 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 150 UV-Vis Spectrophotometer

Perform quantitative measurements in routine industrial QA/QC or university chemistry labs with the automated and network-capable Thermo Scientific™ GENESYS 150 UV-Vis Spectrophotometer.

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 150 UV-Vis Spectrophotometer</strong></h3><p><strong>For advanced teaching labs, R&amp;D, research and life science applications requiring higher throughput or temperature control.</strong></p><h5><strong>Elite performance, enhanced capabilities</strong></h5><ul><li>7-inch, high-resolution touchscreen interface</li><li>Local control increases speed and reliability for routine analysis</li><li>Large sample compartment with front access simplifies sample handling</li><li>Wi-Fi ready - save data and methods, print results from on-board control</li></ul><h5><strong>Designed for</strong></h5><ul><li>Chemistry labs</li><li>Routine measurements</li><li>Moderate throughput requirements</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_150_titul_B_a202c02cea.jpg" alt="Thermo Scientific™ GENESYS™ 150 Uv-Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_150_titul_B_a202c02cea.jpg 180w," sizes="100vw" width="415" height="360"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific: Genesys spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 150 UV-Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.002 A</li><li><strong>Compartments:</strong> Accommodates (optional):<ul><li>8-position cell changer</li><li>4-position cell changer (long path cells)</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0005 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Includes:</strong> Genesys 150 Spectrophotometer</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt; 5 years typical, 3 years guaranteed</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Dual Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –2A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Slow, medium and fast – up to 1600 nm/min.</li><li><strong>Stray Light:</strong> &lt; 1.0%T 198 nm (KCl) , &lt;0.05%T at 220 nm (NaI), &lt;0.03%T at 340 nm (NaNO<sub>2</sub>)</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Tiltable, 800 x 1280 pixels</li><li><strong>Spectral Bandwidth:</strong> 2 nm</li><li><strong>Wavelength Range:</strong> 190 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ GENESYS™ 180 UV-Vis Spectrophotometer

Perform high throughput quantitative UV-Vis measurements where a double beam is required as a reference cell position with the  Thermo Scientific™ GENESYS™ 180 UV-Visible Spectrophotometer. 

<h4><strong>GENESYS - developed for users, designed for results</strong></h4><p>Built on the foundation of 60 years of spectroscopy experience, the next generation Thermo Scientific™ GENESYS™ family of Vis/UV-Vis spectrophotometers provides exceptional performance with a contemporary design.</p><ul><li>Start taking measurements immediately with the simple-to-use, high-resolution, color-display start menu</li><li>Exchange samples with ease with large, accessible sample compartment</li><li>Save your data fast any way you want it with multiple data-export options</li></ul><p>There is a GENESYS spectrophotometer you can count on to provide accurate, reproducible results for your application requirements.</p><h3><strong>GENESYS 180 UV-Vis Spectrophotometer</strong></h3><p><strong>For laboratories requiring double beam with a reference cell position.</strong></p><h5><strong>High-throughput ready</strong></h5><ul><li>Double-beam optics</li><li>Ideal solution when a reference beam is required, such as for kinetics</li><li>8-cell changer standard</li><li>Make measurements outside the sample compartment without cuvettes using fiber optic coupler and probe</li></ul><p><strong>Designed for laboratories requiring double beam operation with a reference cell position.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_180_titul_D_open_90df06abb8.jpg" alt="Thermo Scientific™ GENESYS™ 180 UV-Vis Spectrophotometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Pragolab_Thermo_Scientific_vis_spektrofotometr_genesys_180_titul_D_open_90df06abb8.jpg 171w," sizes="100vw" width="467" height="427"></p><h3><strong>Walk-up convenience</strong></h3><p><strong>Simple-to-use, touchscreen user interface features the methods and applications most important to you.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg" alt="Thermo Scientific Genesys spectrophotometers" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Genesys_spectrophotometers_ae282fe726.jpg 239w," sizes="100vw" width="1422" height="928"></p><h5><strong>Flexible computer control</strong></h5><p>Optional VISIONlite software offers complete control from a Microsoft ® Windows ® computer providing applications for:</p><ul><li>Scanning</li><li>Quantitative analysis</li><li>Kinetics</li><li>Fixed wavelength measurements</li></ul><h3><strong>GENESYS 180 UV-Vis Spectrophotometer Specifications</strong></h3><ul><li><strong>Baseline Flatness:</strong> ±0.002 A</li><li><strong>Compartments:</strong><ul><li>8-position cell changer (standard)</li><li>Also accommodates (optional):<ul><li>4-position cell changer (long path cells)</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul></li></ul></li><li><strong>Connections:</strong>&nbsp;<ul><li>Single USB-A</li><li>Duplex USB-A</li><li>Export data to network or PC via USB, Ethernet, or Wi-Fi USB adaptor, available</li><li>Print via USB, Ethernet or Wi-Fi USB adaptor available</li></ul></li><li><strong>Dimensions (L x W x H):</strong> 35.5 x 38.5 x 19.5 cm</li><li><strong>Drift:</strong> (At 500 nm after 1 hour warmup) &lt;0.0005 A/hr.</li><li><strong>Electrical Requirements:</strong> External AC to DC converter. Voltage and Frequency (Hz) selected automatically, 100/240 V, 50/60 Hz</li><li><strong>Keypad:</strong> Touchscreen</li><li><strong>Lamp Life:</strong> &gt; 5 years typical, 3 years guaranteed</li><li><strong>Noise:</strong> (RMS at 500 nm 60 consecutive measurements)<ul><li>≤0.00020A at 0A at 260 and 500 nm</li><li>≤0.00030A at 1A at 260 and 500 nm</li><li>≤0.00040A at 2A at 260 and 500 nm</li></ul></li><li><strong>Optical Design:</strong> Double Beam</li><li><strong>Photometric Accuracy:</strong> ±0.002A at 0.5A, ±0.004A at 1.0A, ±0.008 A at 2.0 A</li><li><strong>Photometric Display:</strong> -3A to +5A</li><li><strong>Photometric Range:</strong> –2A to +3.5A</li><li><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A measured at 1.0 A at 546 nm</li><li><strong>Printer Included:</strong> Snap-on printer available</li><li><strong>Scan Speed:</strong> Slow, medium and fast – up to 1600 nm/min.</li><li><strong>Stray Light:</strong> &lt; 1.0%T 198 nm (KCl) , &lt;0.05%T at 220 nm (NaI), &lt;0.03%T at 340 nm (NaNO<sub>2</sub>)</li><li><strong>Warranty:</strong> 2 yrs std + 1 yr ext upon reg</li><li><strong>Wavelength Accuracy:</strong> ±0.5 nm</li><li><strong>Wavelength Data Interval:</strong> 0.1 nm, 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm</li><li><strong>Wavelength Repeatability:</strong> &lt; ±0.2 nm</li><li><strong>Weight (Metric):</strong> 7.5 kg</li><li><strong>Detector Type:</strong> Dual Silicon Photodiodes</li><li><strong>Display:</strong> 7 in. High Definition Color Touchscreen, Tiltable, 800 x 1280 pixels</li><li><strong>Spectral Bandwidth:</strong> 2 nm</li><li><strong>Type:</strong> UV-Vis Spectrophotometer</li><li><strong>Wavelength Range:</strong> 190 to 1100 nm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific BioMate 160 UV-Vis Spectrophotometer

Perform quantitative measurements in life science laboratories with the automated and network-capable Thermo Scientific™ BioMate™ 160 UV-Visible Spectrophotometer. 

<p><strong>Perform quantitative measurements in life science laboratories with the automated and network-capable Thermo Scientific™ BioMate™ 160 UV-Visible Spectrophotometer. The BioMate 160 Spectrophotometer offers pre-programmed assay methods for nucleic acid and protein concentration as well as cell culture measurements. Optimized for usability and performance, this platform features a high-resolution color touchscreen, optional Wi-Fi networking, and a rugged design.</strong></p><p>The BioMate UV-Vis Spectrophotometer provides automation for high-throughput options and room-light resistance, allowing lid-open operation for improved speed and convenience. Software includes pre-programmed life science methods such as Nucleic Acid A260; Protein A280 and A205; Protein Colorimetric assays and OD600.</p><p>A full line of accessories, including automated cell changers and cell holders, sipper, and fiber optic probes are designed to simplify sampling and accommodate high throughput measurements and temperature control.</p><h5><strong>Features:</strong></h5><ul><li>7-inch high-resolution touchscreen user interface</li><li>Pre-programmed life science methods</li><li>Networking capable (Wi-Fi adaptor available)</li><li>Room light resistance for 'open-lid' operation</li><li>Sipper accessory</li><li>Removable, washable sample compartment liner with magnetic placement and hold-down</li><li>Accommodates cells up to 100 mm pathlength</li><li>(Optional) 8-position cell changer with switchable turret</li><li>(Optional) 4-position cell changer (long path cells)</li><li>(Optional) Peltier-thermostatted single cell holder (20 °C - 60 °C)</li></ul><h5><strong>Designed for:</strong></h5><ul><li>Advanced teaching labs</li><li>R&amp;D departments</li><li>Applications requiring high throughput or temperature control</li></ul><h4><strong>Specifications</strong></h4><p><strong>Instrument Type:</strong> UV-Visible Spectrophotometer<br><strong>Optical Design:</strong> Dual beam<br><strong>Wavelength Range:</strong> 190–1100 nm<br><strong>Spectral Bandwidth:</strong> 2 nm<br><strong>Photometric Range:</strong> –2 A to +3.5 A<br><strong>Photometric Accuracy:</strong> ±0.002 A at 0.5 A, ±0.004 A at 1.0 A, ±0.008 A at 2.0 A<br><strong>Photometric Repeatability:</strong> ±0.001 A at 1 A (546 nm)<br><strong>Photometric Display:</strong> –3 A to +5 A<br><strong>Noise (RMS at 500 nm):</strong></p><ul><li>≤0.00020 A at 0 A</li><li>≤0.00030 A at 1 A</li><li>≤0.00040 A at 2 A<br><strong>Drift:</strong> &lt;0.0005 A/hr at 500 nm after 1-hour warmup<br><strong>Baseline Flatness:</strong> ±0.002 A<br><strong>Stray Light:</strong></li><li>&lt;1.0%T at 198 nm (KCl)</li><li>&lt;0.05%T at 220 nm (NaI)</li><li>&lt;0.03%T at 340 nm (NaNO₂)</li></ul><h5><strong>Wavelength Performance</strong></h5><ul><li><strong>Accuracy:</strong> ±0.5 nm</li><li><strong>Repeatability:</strong> ±0.2 nm</li><li><strong>Data Interval Options:</strong> 0.2, 0.5, 1, 2, 5 nm</li><li><strong>Scan Speed:</strong> Slow, medium, fast (up to 1600 nm/min)</li></ul><h5><strong>Display &amp; User Interface</strong></h5><ul><li><strong>Touchscreen:</strong> 7 in. high-definition color, tiltable (800 × 1280 px)</li><li><strong>Keypad:</strong> Touchscreen interface</li></ul><h5><strong>Connectivity &amp; Data Handling</strong></h5><ul><li><strong>Connections:</strong> Single USB-A, Duplex USB-A</li><li><strong>Data Export:</strong> USB, Ethernet, Wi-Fi adaptor (optional)</li><li><strong>Printer Support:</strong> Snap-on printer (optional), USB/Ethernet/Wi-Fi printing available</li></ul><h5><strong>Sample Compartment Compatibility (Optional Accessories)</strong></h5><ul><li>8-position or 4-position cell changers</li><li>Long path cell changer</li><li>Peltier thermostatted cell holder (20–60 °C)</li><li>Sipper accessory</li><li>Fiber optic probe coupler</li></ul><h5><strong>General Specifications</strong></h5><ul><li><strong>Lamp Life:</strong> &gt;5 years typical, 3 years guaranteed</li><li><strong>Detector Type:</strong> Dual silicon photodiodes</li><li><strong>Dimensions (L × W × H):</strong> 35.5 × 38.5 × 19.5 cm</li><li><strong>Weight:</strong> 7.5 kg</li><li><strong>Power Requirements:</strong> 100–240 V, 50/60 Hz (auto-selecting via external AC–DC converter)</li><li><strong>Certifications:</strong> Certificate of Analysis (COA), Certificate of Conformance (COC)</li><li><strong>Warranty:</strong> 2 years standard + 1-year extension upon registration</li><li><strong>Unit Size:</strong> Each</li></ul>

Products from category UV-VIS spectrophotometry distributed by Thermo Fisher Scientific (EMEA) - page 1

Related content

Mineral Phase-Resolved Quantification in LA-ICP-MS Imaging

Webinars LabRulezICPMS Week 07/2026

Research from IOCB Prague reveals a previously unknown mechanism of genetic transcription