<p><strong>Alloys are formed when a metal is combined with another element to strengthen the base metal’s properties. Basically, an alloy is just a modified metal. Superalloys are similar, but these specific high-performance materials are held to a higher standard. They are typically nickel-based, cobalt-based, titanium-based, or iron-based.&nbsp;</strong></p><p>To be classified as a superalloy, the alloy must be able to reliably function under extremely high temperatures, possess superior strength and surface stability, and must be resistant to thermal creep deformation. Strong corrosion and oxidation resistance are also features of superalloys, but it’s important to note that they are not impervious to oxidation over time if protective measures are not taken. Unfortunately, even when protective measures are taken, contaminants like sulfur threaten to render that protection useless.</p><h4><strong>Why is Protection from Oxidation Important?</strong></h4><p>Oxidation negatively affects a superalloy by weakening its strength, which over time can lead to embrittlement and cracking. Since high-performance materials like superalloys are mainly used and relied on in industries like aerospace and nuclear energy, it is crucial that these materials perform as intended. Material failures could be the difference between life and death, in some circumstances.</p><h4><strong>Selective Oxidation</strong></h4><p>To make superalloys even more indestructible and shield against oxidation, selective oxidation is performed. With selective oxidation, superalloys are designed to oxidize in a way that creates a<strong> protective layer of oxidized material</strong> that “covers” the alloy, keeping the alloy’s inner structure from oxygen invasion. However, this means that in order to keep protecting the superalloy’s infrastructure, the protective oxidized layer needs to remain stable and intact.</p><h4><strong>Sulfur: A Dangerous Threat</strong></h4><p>The presence of sulfur, even at trace levels, can interfere with the selective oxidation process. Sulfur degrades that protective layer, leaving the superalloy vulnerable to negative oxidation and shortening its useful lifespan. Therefore, the accurate determination of sulfur content, down to the <strong>tenth of a microgram</strong>, is paramount for ensuring optimal performance and longevity in superalloys.</p><h4><strong>A Combustion Technique for Ultimate Confidence</strong></h4><p>Historically, the only way to accurately determine ultra-low levels of sulfur was with<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1842"><strong> glow discharge mass spectrometry (GD-MS)</strong></a>, due to its high sensitivity. Now, even combustion methods can be used when paired with the right instruments, like<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1879"><strong> LECO’s CS844ES</strong>.</a>&nbsp;</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_844_Analyza_uhliku_a_siry_spalovaci_metodou_18532af2ef.jpg" alt="LECO: Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental: LECO 844 Series Combustion Analysis for Carbon and Sulfur." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_844_Analyza_uhliku_a_siry_spalovaci_metodou_18532af2ef.jpg 139w," sizes="100vw" width="710" height="792"></p><p><strong>The CS844ES </strong>uses high-frequency combustion and intelligent carrier gas management with infrared detection to reach a detection limit of approximately <strong>0.1μg</strong>, guaranteeing even trace amounts of sulfur will be detected and ensuring confident quality control of superalloys.<br>The sensitivity, ease-of-use, and speed of this instrument make it a reliable tool for any lab. Plus, the cost of combustion instrumentation is significantly lower than GD-MS, making it a practical choice as well.</p><h4><strong>More About Sulfur and Superalloys</strong></h4><p>Since superalloys make up fundamental parts of aerospace equipment, medical devices, and more, knowing that they will perform as they are supposed to is paramount. Feeling confident in sulfur level results can be achieved through specialized combustion techniques, avoiding costly GD-MS.&nbsp;</p><p>To learn more about LECO’s CS844ES, <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/CS_844_844_ES_S_STEEL_NICKEL_SUPERALLOYS_203_821_540_9f6feba049.pdf"><strong>download this app note</strong></a> that details how the instrument performed when testing <strong>steel, nickel, and superalloys</strong>. You can also <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1879"><strong>visit our website</strong></a> to read more about the instrument and<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/209_214_5c92613a24.pdf"> <strong>download a brochure</strong>.</a> To learn more about how LECO serves the high-performance materials industry, visit our<a target="_blank" rel="noopener noreferrer" href="https://www.leco.com/applications/high-performance-materials/"> <strong>High Performance Materials Resource Hub</strong>.</a></p>

Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental

<p><strong>The standard uncertainty arising from random effects is often derived from repeated experiments and is quantified in terms of the standard deviation </strong><i><strong>s</strong></i><strong> of the measured values of the quantity. If it is the standard uncertainty arising from random effects on a single measurement that is required, then the observed standard deviation </strong><i><strong>s</strong></i><strong> is used without change. However, for a result which is the mean </strong><i><strong>x</strong></i><strong> of </strong><i><strong>n</strong></i><strong> measurements the standard uncertainty decreases as </strong><i><strong>n</strong></i><strong> increases, so that:</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Using_repeated_measurements_to_improve_the_standard_uncertainty_equation_1_19f8f07f8f.jpg" alt="Eurachem: Using repeated measurements to improve the standard uncertainty - Equation 1" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Using_repeated_measurements_to_improve_the_standard_uncertainty_equation_1_19f8f07f8f.jpg 245w," sizes="100vw" width="485" height="138"></p><p>Example 1 shows how Eq (1) applies when estimating the uncertainty of a mean value, but not when considering the uncertainty of individual observations.</p><blockquote><p><strong>Example 1</strong> A volumetric pipette is calibrated with 12 measurements; the mean and the standard deviation are calculated. Eq. 1 applies to estimate the standard uncertainty of the mean value. However, when using the pipette to deliver one aliquot, Eq. 1 does not apply and the standard uncertainty due to random variation on this single measurement is the standard deviation <i>s</i></p></blockquote><p>For Eq (1) to be valid, it is a requirement that all the measurements are independent and from a stable test sample under the <strong>same</strong> measurement conditions. The measurement conditions for all the measurements could be, for example, 1) repeatability conditions, 2) intermediate precision (within laboratory reproducibility) conditions or 3) reproducibility conditions&nbsp;</p><p>It is very important to be aware that the standard uncertainty given by Eq. 1 only gives the estimated uncertainty due to random variation under the conditions of measurement under which the observations were taken, and is only strictly valid for independent observations.&nbsp;</p><p>It can be hard to decide whether observations are sufficiently independent for Eq. 1 to apply, as there is no simple, general, rule. The following paragraphs therefore give examples of different circumstances to help identify circumstances when Eq. 1 can safely be used.</p><h3><strong>Example where Equation (1) applies&nbsp;</strong></h3><h4><strong>Measurement of inhomogeneous samples&nbsp;</strong></h4><p>If inhomogeneity for test samples is a major part of the uncertainty the analyst may choose to measure more test portions from each test sample in order to reduce the standard uncertainty. If all these measurements are made under repeatability conditions, i.e. the same measurement conditions following the whole procedure, including repeated random sampling from the test sample, the standard deviation of the mean, given by Eq. (1), should be used to estimate the uncertainty arising from variation under repeatability conditions.&nbsp;</p><h3><strong>Examples where Equation (1) does not apply&nbsp;</strong></h3><p>The following paragraphs give two examples where neither the standard deviation nor the standard deviation of the mean can be directly applied without further analysis of the data.&nbsp;</p><h4><strong>Measurements taken in groups&nbsp;</strong></h4><p>One example is when we have data from internal quality control from a measurement procedure that includes a calibration before analysis each day. We want to calculate the standard uncertainty of the mean value used to set the central line in the QC chart. The data consist of duplicate QC measurements performed on a stable test sample each day over a longer period of time (say, <i>p</i> days), giving a total of 2<i>p</i> observations; that is, <i>p</i> groups of two measurements. Because each pair of duplicate measurements has a single calibration error in common; the duplicates within the data set are not strictly independent and Eq. (1) cannot be directly used for all 2<i>p</i> observations. The uncertainty of the mean can most easily be calculated by taking the standard deviation of the <i>p</i> means for each day and dividing that standard deviation by <i>√p</i> . Analysis of variance can also be useful in similar cases. Similar principles apply to other kinds of grouping, including grouping by operator, instrument etc.&nbsp;</p><h4><strong>Measurement when the test item or measurement system is not stable over time</strong></h4><p>Another common example is time dependent data. The time dependence could be due to instrument drift or to actual change in concentration by time. In such cases the error for a given observation is partly random and in part ‘carried over’ from the previous observation. Again the errors affecting each observation are not independent because some part of the error is common to successive observations; Eq. (1) can not be used and more complex statistical techniques, that allow for correlation, must be used to process the data.&nbsp;</p><p>For further guidance on the treatment of correlated data in uncertainty evaluation, see <strong>Eurolab Technical Report 1/2006</strong>: Guide to the Evaluation of Measurement Uncertainty for Quantitative Test Results, Appendix A.5</p>

Using repeated measurements to improve the standard uncertainty

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the week of 27th July 2026? Check out new documents from the field of spectroscopy/spectrometry and related techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT SPECTROSCOPY/SPECTROMETRY RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><strong>LabRulezGCMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies,</strong> <strong>Shimadzu </strong>and <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. Agilent Technologies: High-Precision Determination of Phosphorus and Potassium in Fertilizers by ICP-OES</strong></h3><p><strong>Accurate nutrient analysis of fertilizers using an </strong><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=5800"><strong>Agilent 5800 ICP-OES</strong></a><strong> and standard bracketing</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_fertilizers_standard_bracketing_5800_icp_oes_5994_9311en_agilent_83cbca87fd.pdf"><strong>Full PDF for download</strong></a><strong>&nbsp;</strong></li></ul><p>Accurate characterization of fertilizer nutrient content is critical for optimizing plant growth, maximizing yield, and ensuring sustainable agricultural practices. Fertilizers must comply with strict regulatory specifications, particularly for declared NPK (nitrogen–phosphorus–potassium) ratios, which define the relative nutrient content supplied to crops. Even small deviations from the specified ratio can impact plant yield, regulatory compliance, customer confidence in the product, as well as its commercial value.&nbsp;</p><p>Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) is a well-established technique for multi-element analysis of complex samples, so is ideally suited to meet the precision and accuracy requirements of fertilizer testing.1,2 However, applications that require very tight tolerances, such as NPK verification, benefit from enhanced calibration approaches as even small deviations from reported values can have large financial implications for the manufacturer.</p><p>Using Agilent ICP-OES instruments, standard bracketing calibration based on a standard–sample–standard measurement sequence, minimizes the impact of sample-to-sample variability and matrix effects.3,4 This approach further improves analytical precision and accuracy compared to conventional external calibration, making it a particularly valuable method for analyzing fertilizers with tightly controlled specifications.&nbsp;</p><p>In this study, an Agilent 5800 Vertical Dual View (VDV) ICP-OES, equipped with an Agilent SPS 4 autosampler and controlled using Agilent ICP Expert Pro software,5 was used to determine P and K concentrations and corresponding NPK ratios in a standard reference material (SRM) and two commercially available fertilizers. The standard bracketing method was adapted from ISO methods 11494 and 114956,7 and adjusted for fertilizer analysis. The performance of the method, when combined with real-time data processing tools, was evaluated for accuracy and precision.</p><h4><strong>Experimental&nbsp;</strong></h4><h5><strong>Instrumentation&nbsp;</strong></h5><p>The <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=5800"><strong>Agilent 5800 VDV ICP-OES </strong></a>was configured with the <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library?mainauthorItems=10&amp;search=SPS+4+autosampler"><strong>Agilent SPS 4 autosampler</strong></a>, which provided automated sample delivery to the instrument (Figure 1). The 5800 ICP-OES was equipped with an Agilent SeaSpray nebulizer, double-pass cyclonic spray chamber, and one-piece VDV torch with a 1.8 mm internal diameter (ID) injector. All components were controlled by Agilent ICP Expert Pro* software. Instrument operating parameters are listed in Table 1.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>This study demonstrates the effectiveness of the Agilent 5800 VDV ICP-OES standard bracketing method for high-precision determination of phosphorus and potassium in fertilizers. The method delivered excellent performance, with relative standard deviations below 0.1% and excellent agreement with expected NPK values, with recoveries ranging from 99 to 102%. The combination of gravimetrically prepared standards, internal standard correction, and bracketing calibration minimizes analytical variability and ensures reliable results for fertilizer quality control.&nbsp;</p><p>In addition, Agilent ICP Expert Pro software streamlines analysis through real-time calculations and automated quality control tools, improving laboratory efficiency and reducing the risk of reporting errors. This approach provides a robust and practical solution for high throughput fertilizer testing laboratories, enabling precise NPK verification that strengthens regulatory compliance, reduces the risk of mislabeling, and supports accurate product pricing.</p><h3><strong>2. Shimadzu: Multifaceted Evaluation of Frozen Tempura Batter Coating Focusing on Food Texture</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00987_en_f919b540e7.pdf"><strong>Full PDF for download</strong></a></li></ul><p>The “deliciousness” of foods consists of multiple factors, including taste, smell, and visual appeal. However, texture, sometimes called “mouthfeel,” is also one extremely important factor. Mouthfeel refers to the physical sensations experienced when food is placed in the mouth or chewed, and is expressed by various onomatopoeic words such as “crisp” and “chewy.” Among these, the packaging of some foods uses onomatopoeic terms to emphasize the appeal of their distinctive textures, and this has become an important “selling point” for consumers when deciding which product to select.&nbsp;</p><p>In the development of food products, the method of evaluating texture has become a key point. Sensory methods have long been used, but because sensory evaluations depend on the human senses, they are easily influenced by differences between individuals conducting the evaluation and their physical condition.</p><p>Thus, the difficulty in ensuring repeatability is an issue. As an additional issue, technical training for the panelists who conduct evaluations also requires time and labor. To compensate for these problems, evaluation methods based on measurement of physical properties with instruments may be used. This approach eliminatesthe human error that had been a problem with sensory evaluations, enabling objective evaluations.&nbsp;</p><p>Food texture is also complexly influenced by the interactions of various factors, such as the ingredients contained in the food, their amounts, and the cooking method. Since differences in these factors may appear in the structure and surface condition of foods, observation and measurement of the internalstructure and surface condition of foods make it possible to analyze and understand the factors that contribute to texture, allowing more efficient food product development from the physical viewpoint. This article introduces an example of an analysis of the differencesin texture that occur due to differences in the heating method from the aspects of evaluation of physical properties and structural and surface observation, using frozen tempura asthe testsample.</p><h4><strong>Experiment&nbsp;</strong></h4><p>In this experiment, four instruments were used for evaluation of mechanical properties and structural and surface observation. Table 1 shows the names of the instruments, the purpose of the experiment, and the corresponding sectionsin this article. The test samples used here were commercially-available frozen tempura, which features “moistness” when prepared by microwave oven cooking and “crispness” after microwave oven + oven cooking. The “Moist” type is prepared by heating for 1 min in a microwave oven, and the “Crisp” type is prepared by additional heating in an oven after microwave heating. Since the heating time in the oven is adjusted depending on the sample size required by each instrument, the specific sample preparation procedure and the flow of the tests will be described in the sections concerning each instrument.</p><h5><strong>Evaluation of Coating Surface Roughness by Laser Microscope&nbsp;</strong></h5><p>The laser microscope was used in high-magnification measurements of the roughness of the sample surface and color observation (color images). It is possible to grasp the differences in the batter coatings of the “Moist” and “Crisp” types from changes in roughness and also changes in color. Fig. 11 shows the appearance of the <strong>OLS5500 laser microscope</strong> used here. In this instrument, optical resolution is enhanced by using a singlewavelength 405 nm laser beam, and topographical information can be acquired by reflective confocal laser microscopy. Color images of the same field can also be obtained by using a white LED.</p><p>In this experiment, the samples were prepared by the following procedure in order to observe the same areas of the “Moist” and “Crisp” samples. First, the entire kabocha tempura was heated for 1 min in the microwave oven, after which part of the sample was cut off and observed on the stage (Fig. 12). Following this, the observed sample was heated in the oven and placed on the stage again, and the “Crisp” sample was observed (Fig. 13). To observe the shape of a wide area of the sample, an alignment (“tile-stitching”) function was used. The image acquisition condition was the ultra-high speed mode using a 20x objective lens.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>A sensory evaluation and evaluation of physical properties using a texture analyzer, and structural observations from the macro to the micro level using an X-ray CT, laser microscope, and SEM were conducted for frozen tempura with different food textures depending on the heating conditions. The impression of the food texture, or “mouthfeel,” obtained in the sensory evaluation was quantified in the form of physical property values by using the texture analyzer, and the factors that formed the grounds for those numerical values were then evaluated based on the results of various types of observation. As a result, it was suggested that differences in food texture correspond to changes in the food structure and oil content.&nbsp;</p><p>In this experiment, different samples were examined with four types of instruments. However, if physical property tests can be carried out with the samples as-is after observation of the same areas, a more direct and high accuracy analysis is considered to be possible. Moreover, in this experiment, the food texture was changed by using different heating methods, but in cases where the ingredients (flour, oil) or the deep-frying method is changed, there is a possibility that different factors from those in this study may contribute to the texture. As demonstrated in this experiment, although “food texture” is often grasped sensorily, as suggested by the term “mouthfeel,” this property can be visualized scientifically in terms of the structure and physical properties of the food and the condition of the oil content by combining multifaceted evaluations using multiple instruments. This technique is expected to become an effective approach for reproducing and controlling the target texture in food product development and quality design.</p><h3><strong>3. Thermo Fisher Scientific: Bauxite analysis with Niton XRF analyzers</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/bauxite_analysis_with_niton_xrf_analyzers_an1795_en_93b319a76e.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Globally, bauxite is the primary source of aluminum (Al) ore and anchors a major industry in many countries, including China, Australia, and Brazil. As such, grading Al concentration is of paramount interest in the mine as is the need to determine concentrations of penalty elements. The desired goal is to conduct all the analysis in a way that maximizes productivity.&nbsp;</p><h4><strong>Application&nbsp;</strong></h4><p>Analysis of aluminum (Al), silicon (Si), and iron (Fe) presents unique challenges. Accurate analysis of all three is critical for ore grading and understanding their influence on the processing and production of the primary metal of interest. Relying on lab-analysis only in bauxite mining operation often results in costly time delays and reduced productivity while waiting hour if not days and weeks for the results.&nbsp;</p><p>With the ruggedized, dust- and splash-proof <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1997"><strong>Thermo Scientific™ Niton™ XL3t GOLDD+ XRL Analyzer</strong></a>, near lab-quality analysis of Al, Si and Fe can be generated on sites, enabling quick decisions in at remote mines. Indeed, the Niton XL3t GOLDD+ analyzer provides rapid and accurate elemental analyses of bauxite ore enabling to map chemical concentrations in realtime, identify excavation hotspots and detect penalty elements.&nbsp;</p><h4><strong>Handheld XRF analyzer&nbsp;</strong></h4><p>Thermo Scientific Niton Handheld XRF analyzers, including the Niton XL3 GOLDD+ analyzer, easily analyze elements from magnesium (Mg) to uranium (U) to fill all exploration and mining needs. These instruments make it easy to perform trend analysis by averaging readings in real-time or by downloading results later to a PC. They deliver fast, accurate elemental analysis for intensive metals exploration and production whether base metals, precious metals, or even rare earth elements.</p><h4><strong>Comments&nbsp;</strong></h4><p>The correlation coefficients and repeatability data for the key elements in bauxite analysis demonstrate the excellent accuracy and precision of the handheld Niton XL3 950 GOLDD+ analyzer, indicating that the Niton XL3 GOLDD+ instrument is ideal for fast mine or field analysis. The instant chemical information it provides allows the user to make critical decisions with minimal downtime, keeping projects running and productive. Additionally, they provide information that minimizes the expense and time of shipping samples for analysis and increases savings. The Thermo Scientific Niton XRF analyzer is a great addition to any process in the life of the mine.</p>

News from LabRulezICPMS Library - Week 31, 2026

Article

Product

Application

Academy

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator for the American iron and steel industry.  Today, almost 80 years later, LECO is recognized globally as a leader in the development of high-quality analytical instrumentation, mass spectrometers, comprehensive two-dimensional chromatography, metallography & optical equipment as well as consumables.

LECO

Thermo Scientific Nicolet iS20 FTIR Spectrometer

Nicolet iS20 FTIR spectrometer with LightDrive optics, <0.25 cm⁻¹ resolution, cloud connectivity, and advanced mixture analysis capabilities.

<p>The <strong>Thermo Scientific Nicolet™ iS™ 20 FTIR Spectrometer</strong> represents a <strong>next-generation FTIR platform</strong> designed for <strong>fast and accurate identification of mixtures, contaminants, and trace components</strong> across applications including <strong>QA/QC, pharmaceuticals, polymers, and forensics</strong>.</p><p>At the core of the system is the <strong>LightDrive™ Optical Engine</strong>, integrating the <strong>source, laser, interferometer, and detector</strong> into a single optimized module. This design delivers <strong>high spectral resolution (&lt;0.25 cm⁻¹)</strong> and a <strong>signal-to-noise ratio up to 50,000:1</strong>, enabling detection of low-level components.</p><p>The instrument features a <strong>touchscreen interface with multi-color LED status indicators (ready / scan / alert)</strong> for intuitive operation. A <strong>sealed and purge-ready optical bench</strong> ensures long-term stability even in demanding environments.</p><p>The system supports <strong>cloud-enabled workflows via Thermo Fisher Cloud</strong> and uses <strong>OMNIC™ / OMNIC Specta™ software</strong>, including a library of <strong>&gt;9,000 spectra</strong> for rapid unknown identification.</p><h4><span><strong>Key Features</strong></span></h4><ul><li>LightDrive™ optical engine (source, laser, interferometer, detector)</li><li>Spectral resolution &lt; 0.25 cm⁻¹</li><li>Signal-to-noise ratio up to 50,000:1</li><li>Touchscreen interface with LED status indicators</li><li>10-year warranty on source, laser, and interferometer</li><li>High data reproducibility (stable IR source)</li><li>Sealed, purge-ready optics</li><li>Cloud connectivity (Thermo Fisher Cloud)</li><li>OMNIC™ and OMNIC Specta™ software (&gt;9,000 spectra library)</li><li>Automated validation (IQ/OQ, pharmacopeias)</li><li>Wide accessory compatibility (SMART, microscopy, TGA-IR)</li></ul><h3><span><strong>Technical Specifications</strong></span></h3><h4><span><strong>Optics and Performance</strong></span></h4><ul><li><strong>Spectral range:</strong><ul><li>7800–350 cm⁻¹ (standard KBr)</li><li>11,000–375 cm⁻¹ (XT-KBr extended range)</li></ul></li><li><strong>Spectral resolution:</strong> &lt; 0.25 cm⁻¹</li><li><strong>Signal-to-noise ratio:</strong> 50,000:1</li><li><strong>Laser: solid-state diode laser (10-year warranty)</strong></li><li><strong>Beamsplitter:</strong><ul><li>KBr/Ge (standard)</li><li>XT-KBr/Ge (optional)</li></ul></li></ul><h4><span><strong>Detection and Sources</strong></span></h4><ul><li><strong>Detector:</strong><ul><li>DTGS (standard)</li><li>optional high-sensitivity detectors (e.g., MCT)</li></ul></li><li><strong>Source:</strong><ul><li>stabilized IR source (non-migrating hot spot)</li><li>optional tungsten/halogen</li></ul></li></ul><h4><span><strong>Construction and Validation</strong></span></h4><ul><li><strong>Optical system:</strong> sealed and purge-ready</li><li><strong>Validation:</strong> integrated SPV, ASTM/NIST traceable</li><li><strong>Compliance:</strong><ul><li>USP / Ph. Eur. / JP / CP</li><li>21 CFR Part 11</li></ul></li></ul><h4><span><strong>Interface and Software</strong></span></h4><ul><li>USB 2.0</li><li>Thermo Fisher Cloud</li><li>Software: OMNIC™ / OMNIC Specta™</li></ul><h4><span><strong>Dimensions and Weight</strong></span></h4><ul><li>Dimensions: 570 × 550 × 250 mm</li><li>Weight: 32 kg</li></ul><h4><span><strong>Electrical</strong></span></h4><ul><li>100–240 V, 50–60 Hz</li></ul>

Thermo Scientific Antaris II FT-NIR Analyzer

The Thermo Scientific Antaris™ II FT-NIR Analyzer enables fast, non-destructive analysis without sample preparation, supporting quality control, process monitoring, and method transfer.

<p><strong>The Thermo Scientific Antaris™ II FT-NIR Analyzer is a Fourier Transform Near-Infrared (FT-NIR) analyzer designed for quality control, process monitoring, and method development in industrial environments. Its rugged design and intuitive operation enable reliable analysis directly on the production floor, in warehouses, and in laboratory.</strong></p><p>The system combines analytical performance with flexibility, supporting seamless method development, transfer, and routine operation. The Antaris II platform ensures reproducible results regardless of configuration, user, or environment, making it ideal for standardized workflows and global deployments.</p><p>FT-NIR technology enables fast, non-destructive analysis without sample preparation, significantly improving efficiency and reducing operational costs.</p><h3><span><strong>Key Features</strong></span></h3><ul><li>FT-NIR spectroscopy for rapid, non-destructive analysis</li><li>Excellent method transferability between instruments</li><li>Rugged industrial design for harsh environments</li><li>Internal HeNe laser calibration – no external calibration required</li><li>Stable, frictionless Michelson interferometer</li><li>Automated workflows and SOP-driven operation</li><li>Fully compliant with regulated environments (GMP, 21 CFR Part 11)</li><li>Low cost of ownership and high reliability</li></ul><h3><span><strong>Sampling Capabilities</strong></span></h3><p><span>The system offers flexible sampling configurations that can be adapted to different material types and application requirements.</span></p><ul><li><strong>Reflectance measurements: </strong>solids, powders, pastes</li><li><strong>Transmission measurements: </strong>liquids, films, tablets</li><li>Fiber optics for in-line and remote measurements</li><li>Integrating sphere for diffuse reflectance</li><li>Tablet analyzer module</li><li>Automation options (up to ~120 samples per hour)</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Antaris_II_FT_NIR_Analyzer_29c4d2264a.jpg" alt="Thermo Scientific Antaris II FT-NIR Analyzer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Antaris_II_FT_NIR_Analyzer_29c4d2264a.jpg 245w," sizes="100vw" width="1584" height="314"></p><h3><span><strong>Software and Data Analysis</strong></span></h3><p>Support for multiple software platforms depending on application (routine analysis, method development, chemometrics)</p><ul><li><strong>RESULT software</strong> for routine operation and GMP environments</li><li><strong>OMNIC software </strong>for advanced spectral analysis</li><li><strong>The Unscrambler software</strong> for chemometric modeling and data interpretation</li></ul><h3><span><strong>Advantages of FT-NIR Technology</strong></span></h3><ul><li>No sample preparation required</li><li>Non-destructive analysis</li><li>Fast measurement times</li><li>High accuracy and reproducibility</li><li>Lower cost compared to wet chemistry and LC methods</li><li>Suitable for at-line and in-line analysis</li></ul><h3><span><strong>Technical Specifications</strong></span></h3><ul><li><strong>Analyzer Type:</strong> FT-NIR (Fourier Transform Near-Infrared)</li><li><strong>Spectral Range:</strong> 12,000 to 3,800 cm⁻¹ (833–2630 nm)</li><li><strong>Resolution:</strong> 4 cm⁻¹ (standard), 2 cm⁻¹ (optional)</li><li><strong>Detector:</strong> InGaAs</li><li><strong>Source:</strong> Long-life halogen NIR source</li><li><strong>Interferometer:</strong> Michelson, frictionless design</li><li><strong>Wavenumber Accuracy:</strong> ±0.03 cm⁻¹</li><li><strong>Repeatability:</strong> &lt;0.006 cm⁻¹</li><li><strong>Reproducibility (system-to-system):</strong> &lt;0.05 cm⁻¹</li><li><strong>Operating Temperature:</strong> 15–35 °C</li><li><strong>Dimensions (W × D × H):</strong> 40.6 × 68.5 × 33 cm</li><li><strong>Weight:</strong> 47.7 kg</li></ul><h3><span><strong>Typical Applications</strong></span></h3><ul><li>Pharmaceutical industry</li><li>Food and beverage analysis</li><li>Chemical industry</li><li>Polymer and materials analysis</li><li>Raw material identification</li><li>Process analytical technology (PAT, at-line, in-line)</li></ul>

Thermo Scientific Antaris MX FT-NIR Process Analyzer

The Thermo Scientific Antaris™ MX FT-NIR Process Analyzer enables real-time on-line and in-line monitoring, improving product quality, yield, and process efficiency.

<p><strong>The Thermo Scientific Antaris™ MX FT-NIR Process Analyzer is a Fourier Transform Near-Infrared (FT-NIR) analyzer designed for real-time on-line and in-line monitoring of industrial manufacturing processes. It enables continuous measurement of critical quality parameters directly in the process, allowing rapid response to deviations and improved production efficiency.</strong></p><p>Using fiber-optic technology and multi-point monitoring, the system can simultaneously measure multiple locations within a process using a single analyzer. This eliminates time delays between sampling points and provides true time-aligned data, which is essential for dynamic processes.</p><p>The Antaris MX is built for demanding production environments, offering high reliability, reproducibility, and seamless integration into process control systems.</p><h3><span><strong>Key Features</strong></span></h3><ul><li>FT-NIR spectroscopy for <strong>real-time process analysis</strong></li><li><strong>Simultaneous multi-point monitoring</strong> with a single analyzer</li><li>Fiber-optic sampling for remote measurements</li><li><strong>ParaLux™ technology </strong>with no mechanical channel switching</li><li>Continuous internal referencing (background correction)</li><li>High stability, sensitivity, and fast response time</li><li><strong>Rugged design</strong> for industrial environments</li><li>Low cost of ownership and high system uptime</li></ul><h3><span><strong>Sampling Capabilities</strong></span></h3><ul><li>Fiber-optic probes for in-line, on-line, and at-line applications</li><li>Reflectance, transmission, and transflectance measurements</li><li>Simultaneous monitoring of up to 4 process points</li><li>Manual and fully automated sampling</li><li>Specialized probes for fermentation, drying, and slurry processes</li><li>Retractable probes with automated cleaning options</li></ul><h3><span><strong>Software and Data Analysis</strong></span></h3><ul><li><strong>RESULT software </strong>for workflow control and automation</li><li><strong>TQ Analyst™</strong> for chemometric modeling and calibration transfer</li><li><strong>OPC communication </strong>for integration with SCADA/DCS systems</li><li><strong>Compatibility </strong>with LIMS, ERP, and tracking systems (RFID, barcode)</li><li><strong>Automated pass/fail </strong>decision-making</li></ul><h3><span><strong>Advantages of FT-NIR in Process Analysis</strong></span></h3><ul><li>Real-time process feedback</li><li>Non-destructive analysis without sample preparation</li><li>Improved product yield and quality</li><li>Reduced operational costs</li><li>Elimination of delays between measurement and decision</li><li>Support for fully automated process control</li></ul><h3><span><strong>Technical Specifications</strong></span></h3><ul><li><strong>Analyzer Type:</strong> FT-NIR (Fourier Transform Near-Infrared)</li><li><strong>Spectral Range:</strong> 12,000 to 3,800 cm⁻¹ (833–2500 nm)</li><li><strong>Resolution:</strong> 4 cm⁻¹ (standard), 2 cm⁻¹ (optional)</li><li><strong>Detector:</strong> InGaAs</li><li><strong>Source:</strong> Long-life halogen NIR source</li><li><strong>Interferometer:</strong> Michelson, frictionless design</li><li><strong>Wavenumber Accuracy:</strong> ±0.1 cm⁻¹</li><li><strong>Repeatability:</strong> &lt;0.006 cm⁻¹</li><li><strong>Reproducibility:</strong> &lt;0.05 cm⁻¹</li><li><strong>Operating Temperature:</strong> 15–35 °C</li><li><strong>Dimensions:</strong> 48.2 × 40.6 × 24.7 cm</li><li><strong>Weight:</strong> 25.8 kg</li></ul><h3><span><strong>Typical Applications</strong></span></h3><ul><li>Real-time process monitoring (on-line, in-line)</li><li>Raw material identification and control</li><li>Pharmaceutical and chemical industries</li><li>Fermentation and reaction monitoring</li><li>Quality control in production</li><li>Mobile and at-line analysis</li></ul>

Thermo Scientific Nicolet Summit LITE FTIR Spectrometer

Compact FTIR spectrometer for routine material identification, QA/QC laboratories, and education. Features LightDrive optics, OMNIC Paradigm software, and easy operation.

<p><strong>The Thermo Scientific™ Nicolet™ Summit™ LITE FTIR Spectrometer is a compact and cost-effective Fourier Transform Infrared (FTIR) spectrometer designed for routine material identification, quality control, incoming goods inspection, and educational laboratories. Combining the proven LightDrive™ Optical Engine with intuitive OMNIC™ Paradigm Software, the system enables users to identify, verify, and characterize materials quickly and confidently.</strong></p><p>Engineered with the same core optical technology used in higher-end Nicolet systems, the Summit LITE delivers reliable <strong>performance, simplified operation, and low ownership costs</strong>. Its compact footprint makes it an ideal solution for multi-user laboratories, QA/QC environments, and teaching facilities where space, efficiency, and ease of use are important.</p><h3><strong>Key Features</strong></h3><ul><li><strong>LightDrive™ Optical Engine</strong> for stable, reliable FTIR performance</li><li><strong>5-year warranty </strong>on the interferometer, laser, and infrared source</li><li><strong>OMNIC™ Paradigm Software </strong>with intuitive dashboard interface</li><li><strong>Smart Background technology</strong> for automatic background collection</li><li><strong>LightBar LED status indicator</strong> with visual pass/fail feedback</li><li>Customizable workflows for routine analytical procedures</li><li><strong>Cloud-enabled connectivity </strong>through OMNIC™ Anywhere</li><li><strong>Built-in spectral library</strong> searching and material identification tools</li><li>Compact, laboratory-friendly footprint</li><li>Optional Everest™ ATR accessory with monolithic diamond crystal</li><li>Designed for QA/QC, teaching, and routine analytical laboratories</li><li>Fast implementation with extensive online help and training resources</li></ul><h3><strong>Software Features</strong></h3><p><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2456"><strong>OMNIC™ Paradigm Software</strong></a> simplifies FTIR operation for both experienced spectroscopists and routine users.</p><h4><strong>Key software capabilities include:</strong></h4><ul><li>Spectral acquisition and processing</li><li>Multi-component searching</li><li>Spectral library creation and management</li><li>Workflow automation</li><li>Automatic background collection</li><li>Remote data access through cloud connectivity</li><li>Secure data handling and compliance-ready workflows</li><li>Support for regulated laboratory environments</li></ul><h3><strong>Technical Specifications</strong></h3><ul><li><strong>Beam Splitter:</strong> KBr/Ge mid-infrared optimized</li><li><strong>Optical Components:</strong> LightDrive Optical Engine including source, laser, interferometer, and detector</li><li><strong>Detector Type:</strong> Lithium tantalate (LiTaO₃) detector</li><li><strong>Dimensions (D × W × H):</strong> 32 × 34 × 24 cm (12.7 × 13.3 × 9.6 in.)</li><li><strong>Applications:</strong> Education, Polymers &amp; Plastics, QA/QC, Pharmaceuticals, Forensics, Environmental Analysis</li><li><strong>Compatible Accessories:</strong> Everest™ Diamond ATR, iD™ Accessories (including iD7 ATR), and hundreds of commercially available accessories</li><li><strong>Source Type:</strong> Single-point IR source with non-migrating hotspot for enhanced data reproducibility</li><li><strong>Spectral Range:</strong> 8000–350 cm⁻¹</li><li><strong>Spectral Resolution:</strong> Better than 0.6 cm⁻¹</li><li><strong>Voltage:</strong> 110/240 V</li><li><strong>Warranty:</strong> 5-year warranty on the interferometer, laser, and infrared source</li></ul><h3><strong>Typical Applications</strong></h3><h4><strong>Pharmaceutical Analysis</strong></h4><ul><li>Raw material identification</li><li>Incoming goods inspection</li><li>Verification of pharmaceutical ingredients</li><li>Contaminant identification</li></ul><h4><strong>Polymer Analysis</strong></h4><ul><li>Polymer identification</li><li>Additive verification</li><li>Material degradation studies</li><li>Packaging material quality control</li></ul><h4><strong>Education</strong></h4><ul><li>FTIR teaching laboratories</li><li>Functional group identification</li><li>Student training and practical exercises</li></ul><h4><strong>Battery Materials</strong></h4><ul><li>Electrolyte characterization</li><li>Material verification</li><li>Quality control of battery components</li></ul><h4><strong>Gemology and Mineral Analysis</strong></h4><ul><li>Gemstone identification</li><li>Mineral composition analysis</li><li>Authentication of natural materials</li></ul><h4><strong>Automotive Materials</strong></h4><ul><li>Polymer and composite characterization</li><li>Interior material verification</li><li>Fuel additive analysis</li><li>Failure investigations</li></ul><h4><strong>Lubricants and Oils</strong></h4><ul><li>Condition monitoring</li><li>Lubricant formulation verification</li><li>Contamination detection</li><li>Predictive maintenance programs</li></ul><h3><strong>Benefits</strong></h3><ul><li>Affordable entry into FTIR spectroscopy</li><li>Easy operation for non-expert users</li><li>Compact design for space-limited laboratories</li><li>Reliable daily performance for routine testing</li><li>Low maintenance requirements</li><li>Fast material identification and verification</li><li>Suitable for both educational and industrial laboratories</li></ul><p>The Nicolet Summit LITE FTIR Spectrometer delivers the essential capabilities required for routine FTIR analysis while maintaining the simplicity, reliability, and affordability expected from the Thermo Scientific Nicolet product family.</p>

Thermo Scientific Nicolet Summit X FTIR Spectrometer

High-performance Thermo Scientific Nicolet Summit X FTIR Spectrometer for QA/QC, research, and regulated laboratories. Features LightDrive optics, a DTGS detector, OMNIC Paradigm software, and advanced workflows.

<p><strong>The Thermo Scientific™ Nicolet™ Summit™ X FTIR Spectrometer is a powerful and versatile Fourier Transform Infrared (FTIR) spectrometer designed for laboratories that require enhanced performance, regulatory readiness, and advanced analytical capabilities. Combining the proven LightDrive™ Optical Engine with OMNIC™ Paradigm Software, the Summit X delivers fast, reliable material identification and characterization while simplifying routine and complex analytical workflows.</strong></p><p>Ideal for both single-user and multi-user laboratories, the Summit X provides an excellent balance of performance, flexibility, and ease of use. Its compact footprint, robust construction, and advanced software environment make it suitable for quality control, research, teaching, and regulated laboratory environments. The system is designed to help laboratories improve productivity, streamline workflows, and maintain confidence in analytical results.</p><h3><strong>Key Features</strong></h3><ul><li>LightDrive™ Optical Engine for exceptional FTIR performance and long-term stability</li><li>10-year warranty on the interferometer, laser, and infrared source</li><li>High-performance DTGS detector</li><li>OMNIC™ Paradigm Software with intuitive dashboard interface</li><li>Smart Background technology for automatic background collection</li><li>LightBar LED status indicator with visual pass/fail feedback</li><li>Pharmacopeia-ready workflows for regulated environments</li><li>Drag-and-drop workflow creation and automation</li><li>Cloud-enabled connectivity through Thermo Fisher Connect and OMNIC™ Anywhere</li><li>Multi-component spectral searching and library management</li><li>Optional touchscreen interface for simplified QA/QC operation</li><li>Optional Everest™ ATR accessory with monolithic diamond crystal</li><li>Compact design suitable for busy laboratory environments</li><li>Designed for routine QA/QC, analytical services, and research applications</li><li>5,000 included reference spectra for rapid compound identification</li></ul><h3><strong>Software Features</strong></h3><p><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2456"><strong>OMNIC™ Paradigm Software </strong></a>provides a modern, workflow-oriented platform that simplifies FTIR analysis for both experienced spectroscopists and routine users.</p><h4><strong>Key software capabilities include:</strong></h4><ul><li>Spectral acquisition and processing</li><li>Multi-component searching</li><li>Spectral library creation and management</li><li>Automated workflow generation</li><li>Drag-and-drop workflow editor</li><li>Smart Background automatic background measurement</li><li>One-click spectral, correlation, and multi-component searching</li><li>Cloud-based data access and collaboration</li><li>AI-assisted spectral interpretation through OMNIC™ Anywhere</li><li>Dashboard-based instrument monitoring and data management</li><li>Support for data integrity and compliance workflows</li></ul><h3><strong>Technical Specifications</strong></h3><ul><li><strong>Beam Splitter:</strong> KBr/Ge mid-infrared optimized</li><li><strong>Optical Components:</strong> LightDrive™ Optical Engine including source, laser, interferometer, and detector</li><li><strong>Detector Type:</strong> Fast-recovery deuterated triglycine sulfate (DTGS) detector</li><li><strong>Dimensions (D × W × H):</strong> 32 × 34 × 24 cm (12.7 × 13.3 × 9.6 in.)</li><li><strong>Applications:</strong> Quality Control (QA/QC), Forensics, Polymers &amp; Plastics, Pharmaceuticals, Environmental Analysis, Education, Geology and Gemstone Analysis</li><li><strong>Compatible Accessories:</strong> Everest™ Diamond ATR, iD™ Accessories (including iD7 ATR), and hundreds of commercially available accessories</li><li><strong>Source Type:</strong> Single-point IR source with non-migrating hotspot for enhanced data reproducibility</li><li><strong>Spectral Range:</strong> 8000–350 cm⁻¹</li><li><strong>Spectral Resolution:</strong> Better than 0.6 cm⁻¹</li><li><strong>Electrical Requirements:</strong> 100/240 V, 47/63 Hz, 110 W</li><li><strong>Warranty:</strong> 10 years on the interferometer, laser, and infrared source</li></ul><h3><strong>Typical Applications</strong></h3><h4><strong>Pharmaceutical Analysis</strong></h4><ul><li>Raw material verification</li><li>Incoming goods inspection</li><li>Pharmacopeial compliance workflows</li><li>Contaminant identification</li><li>At-line manufacturing support</li></ul><h4><strong>Polymer Analysis</strong></h4><ul><li>Polymer identification</li><li>Additive verification</li><li>Material degradation studies</li><li>Packaging material quality control</li><li>Composite material characterization</li></ul><h4><strong>Education and Academic Research</strong></h4><ul><li>FTIR teaching laboratories</li><li>Functional group identification</li><li>Student training and practical exercises</li><li>Research applications</li></ul><h4><strong>Battery Materials and Components</strong></h4><ul><li>Electrolyte characterization</li><li>Material verification</li><li>Quality control of battery components</li><li>Monitoring material changes affecting battery performance and safety</li></ul><h4><strong>Gemology and Mineral Analysis</strong></h4><ul><li>Gemstone identification</li><li>Mineral composition analysis</li><li>Authentication of treated and untreated gemstones</li></ul><h4><strong>Automotive Materials</strong></h4><ul><li>Polymer and composite characterization</li><li>Interior material verification</li><li>Fuel additive analysis</li><li>Material development and failure investigations</li></ul><h4><strong>Lubricants and Oils</strong></h4><ul><li>Lubricant condition monitoring</li><li>Formulation verification</li><li>Contamination detection</li><li>Predictive maintenance programs</li></ul><h3><strong>Benefits</strong></h3><ul><li>Enhanced performance for demanding QA/QC laboratories</li><li>Long-term reliability supported by a 10-year optical system warranty</li><li>Intuitive software that reduces training requirements</li><li>Streamlined workflows that improve laboratory productivity</li><li>Ready for regulated and compliance-driven environments</li><li>Flexible platform for both routine analysis and advanced applications</li><li>Cloud-enabled collaboration and remote data access</li><li>Compact design with a small laboratory footprint</li></ul><p>The Nicolet Summit X FTIR Spectrometer combines high-performance optics, advanced software, and regulatory-ready workflows in a compact platform designed to meet the needs of modern analytical laboratories. Whether used for quality control, materials characterization, research, or regulated testing, the Summit X delivers the performance, reliability, and productivity expected from the Thermo Scientific™ Nicolet™ product family.</p>

Thermo Scientific Nicolet Summit PRO FTIR Spectrometer

High-performance Thermo Scientific Nicolet Summit PRO FTIR spectrometer for demanding QA/QC, regulated, and research laboratories. Features touchscreen operation, high spectral resolution, and OMNIC Paradigm software.

<p><strong>The Thermo Scientific™ Nicolet™ Summit™ PRO FTIR Spectrometer is the most advanced model in the Nicolet Summit family, combining high-performance optics, superior spectral resolution, and an integrated touchscreen interface in a compact and versatile platform. Designed for demanding QA/QC laboratories, analytical service laboratories, regulated environments, and research applications, the Summit PRO delivers fast, reliable material identification and characterization while simplifying routine and advanced workflows.</strong></p><p>Powered by the proven LightDrive™ Optical Engine and OMNIC™ Paradigm Software, the Summit PRO offers outstanding performance, intuitive operation, and advanced compliance capabilities. Its integrated touchscreen interface and built-in workflow tools help laboratories improve productivity, streamline data acquisition, and maintain confidence in analytical results.</p><h3><strong>Key Features</strong></h3><ul><li>LightDrive™ Optical Engine for exceptional FTIR performance and long-term stability</li><li>High-resolution performance with spectral resolution better than 0.45 cm⁻¹</li><li>Thermoelectrically cooled (TEC) DTGS detector for maximum detector response linearity</li><li>10-year warranty on the interferometer, laser, and infrared source</li><li>Integrated touchscreen interface for simplified QA/QC workflows</li><li>OMNIC™ Paradigm Software with touchscreen, operator, and desktop operating modes</li><li>Smart Background technology for automatic background collection</li><li>LightBar LED status indicator with visual pass/fail feedback</li><li>Pharmacopeia-ready workflows for regulated environments</li><li>Drag-and-drop workflow creation and automation</li><li>Cloud-enabled connectivity through Thermo Fisher Connect and OMNIC™ Anywhere</li><li>AI-assisted spectral interpretation through OMNIC™ Anywhere</li><li>Multi-component spectral searching and library management</li><li>Everest™ ATR accessory with monolithic diamond crystal available</li><li>5,000 included reference spectra for rapid compound identification</li><li>Compact footprint suitable for both routine and research laboratories</li></ul><h3><strong>Software Features</strong></h3><p><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2456"><strong>OMNIC™ Paradigm Software</strong></a><strong> </strong>provides a modern, workflow-oriented platform that simplifies FTIR analysis for both experienced spectroscopists and routine users.</p><h4><strong>Key software capabilities include:</strong></h4><ul><li>Spectral acquisition and processing</li><li>Multi-component searching</li><li>Spectral library creation and management</li><li>Automated workflow generation</li><li>Drag-and-drop workflow editor</li><li>Smart Background automatic background measurement</li><li>One-click spectral, correlation, and multi-component searching</li><li>Cloud-based data access and collaboration</li><li>AI-assisted spectral interpretation through OMNIC™ Anywhere</li><li>Dashboard-based instrument monitoring and data management</li><li>Support for data integrity and compliance workflows</li><li>Touchscreen, Operator, and Desktop operating modes</li></ul><h3><strong>Technical Specifications</strong></h3><ul><li><strong>Beam Splitter:</strong> KBr/Ge mid-infrared optimized</li><li><strong>Optical Components:</strong> LightDrive™ Optical Engine including source, laser, interferometer, and detector</li><li><strong>Detector Type:</strong> Thermoelectrically cooled (TEC) DTGS detector for maximum detector response linearity</li><li><strong>Dimensions (D × W × H):</strong>&nbsp;<ul><li><strong>Spectrometer: </strong>32 × 34 × 24 cm (12.7 × 13.3 × 9.6 in.)</li><li><strong>Spectrometer with touchscreen:</strong> 32 × 53 × 43 cm (12.0 × 20.8 × 17.0 in.)</li></ul></li><li><strong>Applications:</strong> Polymers &amp; Plastics, QA/QC, Pharmaceuticals, Education, Forensics, Geology and Gemstone Analysis, Automotive Materials, Environmental Analysis</li><li><strong>Compatible Accessories:</strong> Everest™ Diamond ATR, iD™ Accessories (including iD7 ATR), and hundreds of commercially available accessories</li><li><strong>Source Type:</strong> Single-point IR source with non-migrating hotspot for unmatched data reproducibility</li><li><strong>Spectral Range:</strong> 8000–350 cm⁻¹</li><li><strong>Spectral Resolution:</strong> Better than 0.45 cm⁻¹</li><li><strong>Electrical Requirements:</strong> 100/240 V, 47/63 Hz, 110 W</li><li><strong>Weight:</strong><ul><li><strong>Spectrometer: </strong>10.9 kg (24 lb)</li><li><strong>Spectrometer with touchscreen:</strong> 12.6 kg (29 lb)</li></ul></li><li><strong>Warranty:</strong> 10 years on the interferometer, laser, and infrared source</li></ul><h3><strong>Typical Applications</strong></h3><h4><strong>Pharmaceutical Analysis</strong></h4><ul><li>Raw material verification</li><li>Incoming goods inspection</li><li>Pharmacopeial compliance workflows</li><li>Contaminant identification</li><li>At-line manufacturing support</li></ul><h4><strong>Polymer Analysis</strong></h4><ul><li>Polymer identification</li><li>Additive verification</li><li>Material degradation studies</li><li>Packaging material quality control</li><li>Composite material characterization</li></ul><h4><strong>Education and Academic Research</strong></h4><ul><li>FTIR teaching laboratories</li><li>Functional group identification</li><li>Student training and practical exercises</li><li>Research applications</li></ul><h4><strong>Battery Materials and Components</strong></h4><ul><li>Electrolyte characterization</li><li>Material verification</li><li>Quality control of battery components</li><li>Monitoring material changes affecting battery performance and safety</li></ul><h4><strong>Gemology and Mineral Analysis</strong></h4><ul><li>Gemstone identification</li><li>Mineral composition analysis</li><li>Authentication of treated and untreated gemstones</li></ul><h4><strong>Automotive Materials</strong></h4><ul><li>Polymer and composite characterization</li><li>Interior material verification</li><li>Fuel additive analysis</li><li>Material development and failure investigations</li></ul><h4><strong>Lubricants and Oils</strong></h4><ul><li>Lubricant condition monitoring</li><li>Formulation verification</li><li>Contamination detection</li><li>Predictive maintenance programs</li></ul><h3><strong>Benefits</strong></h3><ul><li>Highest-performance model in the Nicolet Summit product family</li><li>Superior spectral resolution for advanced analytical applications</li><li>Integrated touchscreen interface for streamlined operation</li><li>Long-term reliability backed by a 10-year optical system warranty</li><li>Advanced compliance and data integrity capabilities</li><li>Flexible platform for QA/QC, regulated laboratories, and research</li><li>Cloud-enabled collaboration and remote data access</li><li>Compact design with a small laboratory footprint</li></ul><p>The <strong>Thermo Scientific™ Nicolet™ Summit™ PRO FTIR Spectrometer </strong>combines high-resolution optics, advanced software, touchscreen operation, and regulatory-ready workflows in a powerful platform designed for modern analytical laboratories. Whether used for quality control, materials characterization, compliance testing, or research, the Summit PRO delivers the highest level of performance available within the Nicolet Summit FTIR family.</p>

Thermo Scientific Nicolet Summit OA FTIR Spectrometer

Dedicated FTIR analyzer for oils, liquids, syrups, and pastes. Features an integrated ZnSe HATR accessory, OMNIC Paradigm software, and rapid qualitative and quantitative analysis.

<p><strong>The Thermo Scientific™ Nicolet™ Summit™ OA FTIR Spectrometer is a dedicated analyzer designed for rapid characterization of oils, liquids, syrups, and viscous samples. Featuring an integrated zinc selenide (ZnSe) horizontal attenuated total reflectance (HATR) accessory, the system provides a constant and reproducible pathlength, making it ideal for both qualitative and quantitative analysis. Its rugged, spill-resistant design and compact footprint make it particularly well suited for QA/QC laboratories and routine industrial testing.</strong></p><p>Powered by the proven LightDrive™ Optical Engine and intuitive OMNIC™ Paradigm Software, the Summit OA delivers reliable performance, simplified workflows, and rapid results. Built-in workflow automation, multivariate analysis capabilities, and seamless cloud connectivity help laboratories improve efficiency while maintaining confidence in analytical data.</p><h3><strong>Key Features</strong></h3><ul><li>Dedicated FTIR analyzer for oils, liquids, syrups, and pastes</li><li>Integrated 40° ZnSe HATR accessory for rapid qualitative and quantitative analysis</li><li>Enhanced sensitivity through multi-reflection HATR technology</li><li>Up to 8× higher absorbance than conventional single-bounce ATR accessories</li><li>LightDrive™ Optical Engine for reliable long-term performance</li><li>10-year warranty on the interferometer, laser, and infrared source</li><li>OMNIC™ Paradigm Software with customizable workflows</li><li>Built-in Windows® 10 computer</li><li>LightBar LED status indicator</li><li>Integration with Thermo Scientific™ TQ Analyst™ software</li><li>User-replaceable ZnSe HATR crystal plate</li><li>Compact, rugged, and spill-resistant design</li></ul><h3><strong>Software Features</strong></h3><p><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2456"><strong>OMNIC™ Paradigm Software </strong></a>provides a flexible and intuitive environment for routine testing, material identification, and quantitative analysis.</p><h4><strong>Key software capabilities include:</strong></h4><ul><li>Spectral acquisition and processing</li><li>Workflow creation and automation</li><li>Visual workflow builder with drag-and-drop functionality</li><li>Spectral comparison and optimization tools</li><li>Multi-component searching</li><li>Cloud-based data access and collaboration</li><li>Integration with Thermo Fisher Connect</li><li>Support for qualitative and quantitative workflows</li><li>Integration with TQ Analyst™ for multivariate analysis</li><li>Packaged workflows for routine operator use</li></ul><h3><strong>Multiple Operating Modes</strong></h3><p><strong>Touchscreen Mode</strong></p><ul><li>Simple click-and-go operation</li><li>Apply → Measure → Clean workflow</li></ul><p><strong>Desktop Mode</strong></p><ul><li>Workflow creation</li><li>Spectral processing and comparison</li><li>Instrument optimization and method development</li></ul><p><strong>Operator Mode</strong></p><ul><li>Password-protected application packages</li><li>Controlled access to predefined workflows, calibrations, and diagnostics</li></ul><h3><strong>Technical Specifications</strong></h3><ul><li><strong>Beam Splitter:</strong> KBr/Ge mid-infrared optimized</li><li><strong>Optical Components:</strong> LightDrive™ Optical Engine including source, laser, interferometer, and detector</li><li><strong>Detector Type:</strong> Fast-recovery deuterated triglycine sulfate (DTGS) detector</li><li><strong>Sampling Accessory:</strong> Integrated zinc selenide (ZnSe) Horizontal ATR (HATR)</li><li><strong>Dimensions (D × W × H):</strong> 32 × 34 × 24 cm (12.7 × 13.3 × 9.6 in.)</li><li><strong>Applications:</strong> Oils, Liquids, Syrups and Pastes, QA/QC, Food &amp; Beverage, Automotive</li><li><strong>Source Type:</strong> Single-point IR source with non-migrating hotspot for unmatched data reproducibility</li><li><strong>Spectral Range:</strong> 6000–650 cm⁻¹</li><li><strong>Electrical Requirements:</strong> 100/240 V, 47/63 Hz, 110 W</li><li><strong>Weight:</strong> 12.6 kg (27.8 lb)</li><li><strong>Warranty:</strong> 10 years on the interferometer, laser, and infrared source</li></ul><h3><strong>Typical Applications</strong></h3><h4><strong>Lubricants and Oils</strong></h4><ul><li>In-service lubricant analysis</li><li>Oil condition monitoring</li><li>Compliance with ASTM D7418, ASTM E2412, and JOAP methods</li><li>Predictive maintenance programs</li></ul><h4><strong>Food and Beverage</strong></h4><ul><li>Edible oil quality control</li><li>Verification of frying oil condition</li><li>Consistency monitoring of food products</li><li>Syrup and beverage analysis</li></ul><h4><strong>Fuels and Biofuels</strong></h4><ul><li>Determination of FAME content in diesel fuel</li><li>Compliance with ASTM D7371</li><li>Biodiesel blend quality control</li></ul><h4><strong>Quality Control and Manufacturing</strong></h4><ul><li>Incoming goods inspection</li><li>Product verification</li><li>Batch-to-batch consistency monitoring</li><li>Routine QA/QC testing</li></ul><h4><strong>Customer-Specific Applications</strong></h4><ul><li>Qualitative material identification</li><li>Quantitative analysis</li><li>Process monitoring</li><li>Custom workflow development</li></ul><h3><strong>Benefits</strong></h3><ul><li>Optimized specifically for liquid and viscous samples</li><li>High sensitivity through integrated multi-reflection HATR technology</li><li>Reduced risk of sample spills damaging the instrument</li><li>Fast, reproducible measurements with minimal sample preparation</li><li>Simplified workflows for routine operators</li><li>Rugged design suitable for industrial environments</li><li>Seamless integration of qualitative and quantitative analysis</li><li>Long-term reliability backed by a 10-year optical system warranty</li></ul><p>The Thermo Scientific™ Nicolet™ Summit™ OA FTIR Spectrometer combines dedicated liquid-sample analysis, integrated HATR technology, intuitive software, and proven FTIR performance in a compact platform designed for routine quality control and industrial testing. Whether analyzing lubricants, edible oils, fuels, syrups, or other liquid products, the Summit OA delivers fast, reliable, and reproducible results.</p>

Thermo Scientific Nicolet iG50 FTIR Spectrometer

The Thermo Scientific Nicolet iG50 is a rugged FTIR spectrometer for process analysis and OEM integration, delivering high analytical performance, flexible configuration, and long-term reliability.

<p><strong>The Thermo Scientific™ Nicolet™ iG50 FTIR Spectrometer combines the analytical performance of a research-grade FTIR system with the robustness required for industrial environments. Designed for process monitoring, OEM integration, and demanding analytical applications, it offers a compact, configurable platform that can be easily integrated into manufacturing and process control systems.</strong></p><p>The modular design supports a variety of optical components, detectors, and sampling interfaces, allowing the system to be tailored to specific application requirements. Its rack-mountable construction, stainless-steel enclosure, and built-in diagnostic capabilities make it suitable for continuous operation in industrial settings while maintaining excellent analytical performance.</p><p>The Nicolet iG50 provides high spectral resolution, excellent signal-to-noise performance, and rapid scan speeds for the characterization of complex gas mixtures and fast transient events. Dynamic optical alignment, automated performance verification, and user-replaceable components help maximize uptime and minimize maintenance requirements.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_5e9eae31bd.jpg" alt="Thermo Scientific Nicolet iG50 FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_5e9eae31bd.jpg 245w," sizes="100vw" width="650" height="384"></p><h3><strong>Key Features</strong></h3><ul><li>Research-grade FTIR performance in a rugged industrial platform</li><li>Compact, rack-mountable design for OEM and process integration</li><li>High spectral resolution for resolving complex gas spectra</li><li>Excellent signal-to-noise ratio for low-level detection</li><li>Rapid scanning capabilities for monitoring transient processes</li><li>Support for dual-detector configurations</li><li>Dynamic optical alignment for enhanced long-term stability</li><li>Built-in diagnostics and automated performance verification</li><li>Continuous on-board hardware monitoring</li><li>User-replaceable source, laser, detector, power supply, and electronics modules</li><li>Configurable front or side beam output options</li><li><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2456"><strong>Thermo Scientific™ OMNIC™ Software</strong></a> included</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_2_cf807ab135.jpg" alt="Thermo Scientific Nicolet iG50 FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_2_cf807ab135.jpg 245w," sizes="100vw" width="650" height="414"></p><h3><strong>Applications</strong></h3><ul><li>Process gas analysis</li><li>Process liquid monitoring</li><li>Volatile organic compound (VOC) analysis</li><li>Continuous emissions monitoring (CEM)</li><li>Chemical process monitoring</li><li>At-line film analysis</li><li>Quality control laboratories</li><li>Polymer and plastics analysis</li><li>Pharmaceutical testing</li><li>Forensic analysis</li><li>Gemstone and materials analysis</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_3_408ce44c58.jpg" alt="Thermo Scientific Nicolet iG50 FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_3_408ce44c58.jpg 230w," sizes="100vw" width="650" height="440"></p><h3><strong>Technical Specifications</strong></h3><ul><li><strong>Spectral range:</strong> 7800–350 cm⁻¹ (KBr beamsplitter), 6000–650 cm⁻¹ (ZnSe beamsplitter)</li><li><strong>Spectral resolution:</strong> 0.5 cm⁻¹</li><li><strong>Beam splitter options:</strong> Ge/KBr or ZnSe</li><li><strong>Detector options: </strong>TE-cooled DLaTGS detectors</li><li><strong>Source: </strong>Polaris™ high-stability, long-life IR source</li><li><strong>Wavenumber precision:</strong> Better than 0.01 cm⁻¹</li><li><strong>Interferometer:</strong> 90° Michelson dynamically aligned interferometer</li><li><strong>A/D converter: </strong>24-bit</li><li><strong>Interface:</strong> USB 2.0</li><li><strong>Power requirements: </strong>100/240 V, 50 Hz, 2.5 A</li><li><strong>Dimensions (W × D × H):</strong> 45 × 42 × 25 cm</li><li><strong>Weight:</strong> 29 kg</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_4_c12c2404eb.jpg" alt="Thermo Scientific Nicolet iG50 FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_4_c12c2404eb.jpg 170w," sizes="100vw" width="650" height="596"></p><h3><strong>Standard Features</strong></h3><ul><li>90° Michelson dynamically aligned interferometer</li><li>Polaris™ high-stability, long-lifetime mid-IR source</li><li>1.5 in (38 mm) collimated front output beam</li><li>Continuously variable iris aperture</li><li>Aluminum-coated mirrors</li><li>Validation/attenuation wheel</li><li>24-bit A/D converter</li><li>Helium-Neon (HeNe) reference laser</li><li>Configurable front or side beam output</li><li>Automated performance verification testing</li><li>Continuous hardware status monitoring</li><li>Thermo Scientific™ OMNIC™ Software included</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_5_60744d1e06.jpg" alt="Thermo Scientific Nicolet iG50 FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_G50_FTIR_Spectrometer_5_60744d1e06.jpg 244w," sizes="100vw" width="650" height="416"></p>

Thermo Scientific Nicolet Apex FTIR Spectrometer

High-performance FTIR spectrometer featuring the LightDrive™ Optical Engine, advanced automation, OMNIC™ Paradigm software, and extensive accessory compatibility for research, QA/QC, and regulated laboratories.

<h5><strong>Advanced FTIR Performance for Research and Routine Analysis</strong></h5><p><strong>The Thermo Scientific™ Nicolet™ Apex FTIR Spectrometer is a premium Fourier Transform Infrared (FTIR) spectrometer designed for laboratories that require exceptional analytical performance, operational flexibility, and regulatory compliance. Suitable for both routine quality control and advanced research applications, the Nicolet Apex combines cutting-edge optical technology, powerful automation, and intuitive software to deliver accurate and reliable results across a broad range of industries.</strong></p><p>At the heart of the system is the proprietary <strong>LightDrive™ Optical Engine</strong>, which provides outstanding spectral quality, excellent sensitivity, and long-term stability. Combined with the OMNIC™ Paradigm software platform and extensive accessory compatibility, the Nicolet Apex helps laboratories increase productivity, improve data quality, and streamline analytical workflows.</p><h3><strong>Key Features</strong></h3><ul><li>High signal-to-noise ratio for demanding analytical applications</li><li>Excellent spectral resolution for detailed molecular characterization</li><li>Patented Smart Background technology for faster measurements and increased throughput</li><li>Multi-sample compartment design for enhanced workflow efficiency</li><li>Multi-detector capability allowing rapid switching between analytical configurations</li><li>Compatible with hundreds of FTIR accessories and sampling techniques</li><li>Seamless integration with FTIR microscopes, TGA-IR systems, gas cells, and automation accessories</li><li>Support for high-throughput and unattended operation</li><li>Remote instrument health monitoring services</li><li>10-year warranty on the interferometer, laser, and infrared source</li></ul><h3><strong>LightDrive™ Optical Engine</strong></h3><p>The Nicolet Apex is built around Thermo Scientific’s advanced LightDrive™ Optical Engine, engineered to deliver exceptional analytical performance and long-term reliability.</p><h4><strong>Advanced Michelson Interferometer</strong></h4><ul><li>High-resolution optical design for superior spectral quality</li><li>Excellent wavelength precision and reproducibility</li><li>Enhanced performance for complex and challenging samples</li></ul><h4><strong>Fast-Recovery DLaTGS Detector</strong></h4><ul><li>Accurate identification and quantification of analytes</li><li>High sensitivity for routine and research applications</li><li>Stable long-term analytical performance</li></ul><h4><strong>High-Stability Infrared Source</strong></h4><ul><li>Consistent energy output for reliable spectral quality</li><li>Excellent peak shape and signal-to-noise performance</li><li>Improved measurement reproducibility</li></ul><h4><strong>Solid-State Diode Laser</strong></h4><ul><li>Temperature-stabilized design for maximum accuracy</li><li>Long operational lifetime</li><li>Reduced maintenance requirements</li></ul><h3><strong>Flexible Configuration and Automation</strong></h3><p>The Nicolet Apex platform can be configured to meet a wide variety of analytical requirements and laboratory environments.</p><ul><li>Available as Apex KBr, Apex XT-KBr, and Apex ZnSe configurations</li><li>Supports TE-MCT detectors for high-speed and high-sensitivity applications</li><li>Multi-sample compartment architecture allows multiple accessories to remain installed simultaneously</li><li>Compatible with automated samplers and high-throughput workflows</li><li>Easily integrated with FTIR microscopes for particle and failure analysis</li><li>Suitable for TGA-IR coupling and advanced gas analysis applications</li></ul><h3><strong>OMNIC™ Paradigm Software</strong></h3><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_Apex_FTIR_Spectrometer_3_71addec4b8.jpg" alt="Thermo Scientific Nicolet Apex FTIR Spectrometer: Paradigm time series measurements for gas sample." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_Apex_FTIR_Spectrometer_3_71addec4b8.jpg 160w," sizes="100vw" width="1007" height="979"></p><p>The Nicolet Apex is powered by <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/2456"><strong>Thermo Scientific™ OMNIC™ Paradigm Software</strong></a>, providing an intuitive and powerful environment for data acquisition, processing, interpretation, and reporting.</p><h4><strong>Software Benefits</strong></h4><ul><li>User-friendly interface suitable for both beginners and experienced users</li><li>Customizable workflows and automation tools</li><li>Advanced spectral processing and interpretation capabilities</li><li>Integrated access to extensive FTIR spectral libraries</li><li>Efficient report generation and data management</li></ul><h4><strong>OMNIC™ Anywhere Cloud Connectivity</strong></h4><ul><li>Remote access to instrument data and functionality</li><li>Real-time collaboration from any location</li><li>Access from computers, tablets, and mobile devices</li><li>Ideal for collaborative and multi-site research environments</li></ul><h4><strong>Remote Instrument Health Monitoring</strong></h4><ul><li>Continuous monitoring of critical instrument components</li><li>Tracking of source, laser, and interferometer performance</li><li>Proactive support from Thermo Fisher Scientific specialists</li><li>Reduced downtime and improved instrument availability</li></ul><h3><strong>Regulatory Compliance</strong></h3><p>The Nicolet Apex FTIR Spectrometer is designed to support laboratories operating in highly regulated industries.</p><ul><li>Automated ASTM E1421 spectrometer performance testing</li><li>NIST-traceable validation standards</li><li>Support for ASTM, USP, Ph. Eur., JP, and CP requirements</li><li>Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) documentation</li><li>21 CFR Part 11 compliance support through OMNIC Paradigm Software</li><li>Electronic signatures, audit trails, and secure data management</li></ul><h3><strong>Applications</strong></h3><p>The versatility of the Nicolet Apex makes it suitable for a wide range of industries and research disciplines.</p><ul><li>Pharmaceutical analysis and quality control</li><li>Forensic investigations</li><li>Polymer and plastics characterization</li><li>Chemical and petrochemical analysis</li><li>Gas analysis</li><li>Materials science research</li><li>Semiconductor analysis</li><li>Microplastics identification</li><li>Environmental studies</li><li>Academic and teaching laboratories</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_Apex_FTIR_Spectrometer_2_c7b1dc750e.jpg" alt="Thermo Scientific Nicolet Apex FTIR Spectrometer: Automated multi-region mapping analysis of microparticles collected from air on a gold coated slide." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_Apex_FTIR_Spectrometer_2_c7b1dc750e.jpg 189w," sizes="100vw" width="951" height="786"></p><h3><strong>Benefits</strong></h3><ul><li>Exceptional spectral performance for both routine and advanced applications</li><li>Flexible platform with extensive accessory compatibility</li><li>Increased productivity through automation and intelligent workflow design</li><li>Comprehensive regulatory compliance support</li><li>Advanced cloud connectivity and remote monitoring capabilities</li><li>Long-term reliability backed by a 10-year optical component warranty</li><li>Suitable for QA/QC, R&amp;D, industrial, academic, and regulated laboratory environments</li></ul>

Thermo Scientific Nicolet iS50R Research FTIR Spectrometer

Modular research FTIR spectrometer featuring 0.09 cm⁻¹ resolution, a patented Vectra-Piezo interferometer, and advanced capabilities including step-scan and time-resolved spectroscopy.

<p><strong>The Thermo Scientific™ Nicolet™ iS50R Research FTIR Spectrometer is a modular research-grade FTIR platform designed for advanced molecular spectroscopy. Featuring the patented Vectra-Piezo interferometer, step-scan capabilities, and flexible optical configurations, it delivers exceptional performance for demanding research applications in materials science, chemistry, pharmaceuticals, and academia.</strong></p><h3><strong>Key Features</strong></h3><ul><li>Research-grade FTIR spectrometer</li><li>Patented Vectra-Piezo interferometer</li><li>Continuous scan, rapid scan, and step-scan operation</li><li>Time-resolved and dual-channel spectroscopy</li><li>Spectral resolution up to <strong>0.09 cm⁻¹</strong></li><li>QuadraFlex™ four-position source mirror</li><li>Triple detector optics</li><li>Standard dual-channel digitizers</li><li>Auto-Tune functionality</li><li>Long-life Polaris™ infrared source</li><li>Touch Point™ one-touch sampling</li><li>High-speed USB 2.0 interface</li><li>Compatible with Smart Accessories</li><li>Expandable with ATR, Raman, NIR, GC-IR, microscope, and TGA modules</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_S50_R_Research_FTIR_Spectrometr_e4146492f6.jpg" alt="Thermo Scientific Nicolet iS50R Research FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_S50_R_Research_FTIR_Spectrometr_e4146492f6.jpg 210w," sizes="100vw" width="650" height="484"></p><h3><strong>OMNIC™ Research Software</strong></h3><p>The Nicolet iS50R is operated using <strong>Thermo Scientific OMNIC™ Research Software</strong>, providing comprehensive tools for advanced FTIR data acquisition and analysis.</p><h4><strong>Software capabilities include:</strong></h4><ul><li>Step-scan and time-resolved spectroscopy</li><li>FTIR amplitude, phase, and polarization modulation</li><li>Phase array processing</li><li>SpectraCorr™ 2D correlation spectroscopy</li><li>MacrosPro workflow automation</li><li>VCD intensity calibration</li><li>Advanced SST research tools</li></ul><h3><strong>Cloud Connectivity</strong></h3><p>The system supports <strong>OMNIC Anywhere</strong> and Thermo Fisher Cloud services, allowing users to securely store, access, share, and interpret spectral data from virtually any location.</p><h3><strong>Applications</strong></h3><ul><li>Advanced molecular spectroscopy</li><li>Materials science</li><li>Polymer research</li><li>Pharmaceutical research</li><li>Chemical analysis</li><li>Academic research</li><li>Time-resolved spectroscopy</li><li>Method development</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Nicolet_i_S50_R_Research_FTIR_Spectrometr_2_82dbff9e4e.jpg" alt="Thermo Scientific Nicolet iS50R Research FTIR Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Nicolet_i_S50_R_Research_FTIR_Spectrometr_2_82dbff9e4e.jpg 245w," sizes="100vw" width="650" height="335"></p><h3><strong>Technical Specifications</strong></h3><ul><li><strong>Beam Splitter:</strong> Far-IR, Mid-IR and Near-IR (gold) plus visible range (aluminum)</li><li><strong>Components:</strong> Sources, detectors and beamsplitters</li><li><strong>Detector Type:</strong> Three-position Paraflect detector mirror; Top-mounted DLaTGS Detector with KBr window</li><li><strong>Dimensions (L x W x H):</strong> 27 × 25 × 11 in. (69.8 × 62.6 × 27.6 cm)</li><li><strong>Electrical Requirements:</strong> 100/240 V, 50/60 Hz</li><li><strong>For Use With (Application):</strong> Materials science, photochemistry and optical research</li><li><strong>For Use With (Equipment):</strong> Smart Accessories; Nicolet iS50 modules; Nicolet Continuum Microscope</li><li><strong>Includes:</strong> with Aluminum Interferometer/Gold Interferometer</li><li><strong>Interface:</strong> USB 2.0</li><li><strong>Product Type:</strong> FTIR Spectrometer</li><li><strong>Source Type:</strong> Dual sources standard: Polaris™ long-life IR and visible/NIR Tungsten-Halogen</li><li><strong>Spectral Range:</strong> 10 to 27,000 cm⁻¹ depending upon configuration</li><li><strong>Spectral Resolution:</strong> 0.09 cm⁻¹</li><li><strong>Weight (English):</strong> 132 lb.</li><li><strong>Weight (Metric):</strong> 60 kg</li><li><strong>Width (English):</strong> 25 in.</li><li><strong>Width (Metric):</strong> 62.6 cm</li><li><strong>Performance Verification:</strong> ValPro and SPV</li><li><strong>Voltage:</strong> 100/240 V</li></ul>

Products from category Infrared spectroscopy from Thermo Fisher Scientific - page 1

Related content

News from LabRulezICPMS Library - Week 31, 2026

Using repeated measurements to improve the standard uncertainty

Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental