Photocatalytic degradation and transformation of pharmaceuticals using exfoliated metal-free g-C3N4

Alloys are formed when a metal is combined with another element to strengthen the base metal’s properties. Basically, an alloy is just a modified metal. Superalloys are similar, but these specific high-performance materials are held to a higher standard. They are typically nickel-based, cobalt-based, titanium-based, or iron-based.&nbsp;To be classified as a superalloy, the alloy must be able to reliably function under extremely high temperatures, possess superior strength and surface stability, and must be resistant to thermal creep deformation. Strong corrosion and oxidation resistance are also features of superalloys, but it’s important to note that they are not impervious to oxidation over time if protective measures are not taken. Unfortunately, even when protective measures are taken, contaminants like sulfur threaten to render that protection useless.<h4>Why is Protection from Oxidation Important?</h4>Oxidation negatively affects a superalloy by weakening its strength, which over time can lead to embrittlement and cracking. Since high-performance materials like superalloys are mainly used and relied on in industries like aerospace and nuclear energy, it is crucial that these materials perform as intended. Material failures could be the difference between life and death, in some circumstances.<h4>Selective Oxidation</h4>To make superalloys even more indestructible and shield against oxidation, selective oxidation is performed. With selective oxidation, superalloys are designed to oxidize in a way that creates a protective layer of oxidized material that “covers” the alloy, keeping the alloy’s inner structure from oxygen invasion. However, this means that in order to keep protecting the superalloy’s infrastructure, the protective oxidized layer needs to remain stable and intact.<h4>Sulfur: A Dangerous Threat</h4>The presence of sulfur, even at trace levels, can interfere with the selective oxidation process. Sulfur degrades that protective layer, leaving the superalloy vulnerable to negative oxidation and shortening its useful lifespan. Therefore, the accurate determination of sulfur content, down to the tenth of a microgram, is paramount for ensuring optimal performance and longevity in superalloys.<h4>A Combustion Technique for Ultimate Confidence</h4>Historically, the only way to accurately determine ultra-low levels of sulfur was with<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1842"> glow discharge mass spectrometry (GD-MS)</a>, due to its high sensitivity. Now, even combustion methods can be used when paired with the right instruments, like<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1879"> LECO’s CS844ES.</a>&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_844_Analyza_uhliku_a_siry_spalovaci_metodou_18532af2ef.jpg" alt="LECO: Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental: LECO 844 Series Combustion Analysis for Carbon and Sulfur." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_844_Analyza_uhliku_a_siry_spalovaci_metodou_18532af2ef.jpg 139w," sizes="100vw" width="710" height="792">The CS844ES uses high-frequency combustion and intelligent carrier gas management with infrared detection to reach a detection limit of approximately 0.1μg, guaranteeing even trace amounts of sulfur will be detected and ensuring confident quality control of superalloys. The sensitivity, ease-of-use, and speed of this instrument make it a reliable tool for any lab. Plus, the cost of combustion instrumentation is significantly lower than GD-MS, making it a practical choice as well.<h4>More About Sulfur and Superalloys</h4>Since superalloys make up fundamental parts of aerospace equipment, medical devices, and more, knowing that they will perform as they are supposed to is paramount. Feeling confident in sulfur level results can be achieved through specialized combustion techniques, avoiding costly GD-MS.&nbsp;To learn more about LECO’s CS844ES, <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/CS_844_844_ES_S_STEEL_NICKEL_SUPERALLOYS_203_821_540_9f6feba049.pdf">download this app note</a> that details how the instrument performed when testing steel, nickel, and superalloys. You can also <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1879">visit our website</a> to read more about the instrument and<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/209_214_5c92613a24.pdf"> download a brochure.</a> To learn more about how LECO serves the high-performance materials industry, visit our<a target="_blank" rel="noopener noreferrer" href="https://www.leco.com/applications/high-performance-materials/"> High Performance Materials Resource Hub.</a>

Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental

The standard uncertainty arising from random effects is often derived from repeated experiments and is quantified in terms of the standard deviation s of the measured values of the quantity. If it is the standard uncertainty arising from random effects on a single measurement that is required, then the observed standard deviation s is used without change. However, for a result which is the mean x of n measurements the standard uncertainty decreases as n increases, so that:<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Using_repeated_measurements_to_improve_the_standard_uncertainty_equation_1_19f8f07f8f.jpg" alt="Eurachem: Using repeated measurements to improve the standard uncertainty - Equation 1" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Using_repeated_measurements_to_improve_the_standard_uncertainty_equation_1_19f8f07f8f.jpg 245w," sizes="100vw" width="485" height="138">Example 1 shows how Eq (1) applies when estimating the uncertainty of a mean value, but not when considering the uncertainty of individual observations.<blockquote>Example 1 A volumetric pipette is calibrated with 12 measurements; the mean and the standard deviation are calculated. Eq. 1 applies to estimate the standard uncertainty of the mean value. However, when using the pipette to deliver one aliquot, Eq. 1 does not apply and the standard uncertainty due to random variation on this single measurement is the standard deviation s</blockquote>For Eq (1) to be valid, it is a requirement that all the measurements are independent and from a stable test sample under the same measurement conditions. The measurement conditions for all the measurements could be, for example, 1) repeatability conditions, 2) intermediate precision (within laboratory reproducibility) conditions or 3) reproducibility conditions&nbsp;It is very important to be aware that the standard uncertainty given by Eq. 1 only gives the estimated uncertainty due to random variation under the conditions of measurement under which the observations were taken, and is only strictly valid for independent observations.&nbsp;It can be hard to decide whether observations are sufficiently independent for Eq. 1 to apply, as there is no simple, general, rule. The following paragraphs therefore give examples of different circumstances to help identify circumstances when Eq. 1 can safely be used.<h3>Example where Equation (1) applies&nbsp;</h3><h4>Measurement of inhomogeneous samples&nbsp;</h4>If inhomogeneity for test samples is a major part of the uncertainty the analyst may choose to measure more test portions from each test sample in order to reduce the standard uncertainty. If all these measurements are made under repeatability conditions, i.e. the same measurement conditions following the whole procedure, including repeated random sampling from the test sample, the standard deviation of the mean, given by Eq. (1), should be used to estimate the uncertainty arising from variation under repeatability conditions.&nbsp;<h3>Examples where Equation (1) does not apply&nbsp;</h3>The following paragraphs give two examples where neither the standard deviation nor the standard deviation of the mean can be directly applied without further analysis of the data.&nbsp;<h4>Measurements taken in groups&nbsp;</h4>One example is when we have data from internal quality control from a measurement procedure that includes a calibration before analysis each day. We want to calculate the standard uncertainty of the mean value used to set the central line in the QC chart. The data consist of duplicate QC measurements performed on a stable test sample each day over a longer period of time (say, p days), giving a total of 2p observations; that is, p groups of two measurements. Because each pair of duplicate measurements has a single calibration error in common; the duplicates within the data set are not strictly independent and Eq. (1) cannot be directly used for all 2p observations. The uncertainty of the mean can most easily be calculated by taking the standard deviation of the p means for each day and dividing that standard deviation by √p . Analysis of variance can also be useful in similar cases. Similar principles apply to other kinds of grouping, including grouping by operator, instrument etc.&nbsp;<h4>Measurement when the test item or measurement system is not stable over time</h4>Another common example is time dependent data. The time dependence could be due to instrument drift or to actual change in concentration by time. In such cases the error for a given observation is partly random and in part ‘carried over’ from the previous observation. Again the errors affecting each observation are not independent because some part of the error is common to successive observations; Eq. (1) can not be used and more complex statistical techniques, that allow for correlation, must be used to process the data.&nbsp;For further guidance on the treatment of correlated data in uncertainty evaluation, see Eurolab Technical Report 1/2006: Guide to the Evaluation of Measurement Uncertainty for Quantitative Test Results, Appendix A.5

Using repeated measurements to improve the standard uncertainty

Article

Product

Application

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator for the American iron and steel industry.  Today, almost 80 years later, LECO is recognized globally as a leader in the development of high-quality analytical instrumentation, mass spectrometers, comprehensive two-dimensional chromatography, metallography & optical equipment as well as consumables.

LECO

Eaton 9E UPS, 3000 VA / 2400 W, Tower, 9E3000I (New)

Reliable 3000 VA online UPS with pure sine wave output, designed to protect critical laboratory and industrial equipment with stable and continuous power supply.

Eaton FlexPDU 8 FR, 1U Rack PDU, C20 Input, 16 A, 4 kW, EFLX8F (New)

Compact 1U rack PDU with C20 input and 9 outputs, delivering reliable power distribution up to 3.84 kW for IT, laboratory, and industrial applications.

Marketplace products from category UPS Backup Power focused on Laboratory equipment from LabRulez - page 1

Related content

Using repeated measurements to improve the standard uncertainty

Superalloys and Sulfur: How Even Trace Amounts Can Be Detrimental

Photocatalytic degradation and transformation of pharmaceuticals using exfoliated metal-free g-C3N4