In late February 2025, a train carrying benzene derailed in Hustopeče nad Bečvou, and within hours, a race was on to save the groundwater and surface water. One of the most toxic industrial substances began seeping into the gravel-sand subsoil. While fieldwork was underway to prevent the spread of contamination, decisions were already being made in the CXI TUL laboratories regarding how to subsequently clean up the contaminated rock environment.The accident ranks among the most serious environmental incidents in the Czech Republic in recent years. After a tanker train derailed, hundreds of metric tons of benzene leaked; due to the highly permeable geological subsoil, it quickly seeped into deeper soil layers and into the groundwater. The combination of the substance’s high toxicity and local conditions complicated both the emergency response and the subsequent remediation. The key was to stop further spread, determine the extent of the contamination, and establish a remediation strategy for the entire site.It was at this stage that CXI TUL became involved in the solution. At the request of the renowned remediation company DEKONTA, a.s., a team led by RNDr. Jan Němeček, Ph.D., began testing the feasibility of the in situ chemical oxidation (ISCO) method. This technology is designed to break down benzene directly within the rock matrix, without the need for extensive excavation of contaminated soil or the pumping out of large volumes of groundwater. The goal was simple: to find a method that would work quickly, safely, and under the actual conditions of the affected site.<h4>Benzene Remediation: Technically Simple, Complicated in Practice</h4>Benzene is a highly toxic and carcinogenic substance that rapidly penetrates into groundwater in permeable subsoil, where it dissolves and spreads further as the water flows toward surface water bodies. Benzene also binds to rock particles and migrates in the form of vapors into overlying unconsolidated layers.Scientists in Liberec therefore tested in situ chemical oxidation (ISCO) technology under laboratory conditions. The goal was to find an oxidant capable of breaking down benzene directly underground into less hazardous substances.The tests evaluated two main options: activated hydrogen peroxide and sodium peroxodisulfate. Both substances removed up to 99.99% of the benzene, but there was a difference in their kinetics and impacts on the natural environment. Activated hydrogen peroxide achieved nearly complete degradation of the contaminant within a single day. Activated sodium peroxodisulfate was slower and also significantly altered the chemistry of the water; it acidified the environment and increased the sulfate content in the water, which poses an additional environmental burden.For field applications, the researchers therefore unequivocally recommended activated hydrogen peroxide.<h4>Dosage Matters</h4>It was not just the oxidant’s effectiveness that was key. It was equally important to determine how the chemical reaction would behave in a real geological environment. The team of scientists therefore also analyzed what is known as soil oxidant consumption (SOD). It turned out that a significant portion of the oxidizing agent does not react solely with benzene but is also consumed to a significant extent by the rock environment itself, particularly by natural organic substances present in the fine-grained fraction of the soil.An oxidant consumption value was determined specifically for the local composition of the aquifers, which is essential for the correct dosing of chemicals in the field so that the remediation is not only effective but also economically viable and safe for surrounding ecosystems.<h4>One Year After the Accident: Research Turns into Real-World Assistance</h4>While the public often perceives university science as a distant world of laboratories and grant projects, it is precisely situations like this that demonstrate its practical impact. The results of the work by researchers at CXI TUL did not remain confined to academic studies but directly influenced decisions regarding the technology used to clean up one of the largest environmental accidents in recent years.

Science on the Front Lines: Cleanup of a Benzene Spill

Development of a Flow-through Cell for Ultrasonic Extraction (UE)─Single Particle (SP)─ICP-MS─an Approach for Nano/Microparticle Elemental and Isotopic Analysis

Measurement results are only fit for purpose if the measurement uncertainty (MU) is reliable and has a magnitude small enough for the intended use. The target MU is the maximum admissible uncertainty defined for a specific measurement goal.&nbsp;In compliance assessment, the MU should be small enough to enable identification of deviations from compliance relevant to the interests to be protected (such as public health or industrial productivity). Too large an uncertainty would not provide the required protection, while an uncertainty that is too small could mean the use of unnecessary expensive measurements.&nbsp;The Eurachem/CITAC guide on ‘Setting and Using Target Uncertainty in Chemical Measurement’ suggests how to set upper boundaries for the uncertainty based on the intended use of the result [1].&nbsp;The impact of the MU on decisions is illustrated in a fictional scenario.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_2_daf2cb4ec8.jpg" alt="Eurachem: Setting Target Measurement Uncertainty" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_2_daf2cb4ec8.jpg 150w," sizes="100vw" width="740" height="770">Mr. Reis is a farmer planning to sell oranges to a juice producer. The juice producer checks oranges for thiabendazole pesticide residues and Brix level (degrees Brix provides a measure of orange juice sweetness). The producer only accepts oranges with thiabendazole residues below 1 mg kg-1 and a Brix level above 55 °Bx, paying more if the Brix level is above 65 °Bx.&nbsp;Mr. Reis contracted Laboratory C to analyse his oranges before shipping them to the producer knowing that the customer also checks the oranges in its laboratory. Mr. Reis was very happy with the results provided by Laboratory C although the pesticide residue analyses were expensive.&nbsp;The producer accepted the oranges but decided to pay less than expected.&nbsp;After asking the juice producer, the detailed results of both laboratories were compared. This showed that although the results were metrologically compatible they supported different decisions on the oranges’ price.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_3_aa7c28e61a.jpg" alt="Eurachem: Setting Target Measurement Uncertainty - Laboratory C" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_3_aa7c28e61a.jpg 245w," sizes="100vw" width="927" height="192"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_4_4588f40881.jpg" alt="Eurachem: Setting Target Measurement Uncertainty - Juice producers Laboratory" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_4_4588f40881.jpg 245w," sizes="100vw" width="911" height="195">The measurement of thiabendazole residues performed by Laboratory C is associated with an extremely low uncertainty making measurements more expensive than necessary. However, the uncertainty associated with the determination of the Brix level is too large, making compliance decisions too uncertain.Measurement results are only fit for the intended use if the measurement uncertainty (MU) is smaller than a maximum acceptable value (i.e. the target MU).&nbsp;Even if the customer or the regulator does not define the target MU, the laboratory should define it to decide if the measurement is fit for the intended use. The Eurachem/CITAC guide [1] suggests the use of different indicators of the measurement quality requirement to define the target MU. Information used to define the target MU is presented from the most likely to become harmonised to the ones supported with less adequate data. The following figure presents this hierarchy of adequacy with numbers from #1 to #9.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_01cd73bb2c.jpg" alt="Eurachem: Setting Target Measurement Uncertainty" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_01cd73bb2c.jpg 245w," sizes="100vw" width="1600" height="900"><blockquote>Approaches to defining the target MU described in the Eurachem/CITAC Guide, where utg and Utg represent the target standard and expanded uncertainties, respectively. (the numbers in the bottom of the circles identify the sections of the Guide)</blockquote>

Setting Target Measurement Uncertainty

Article

Academy

Environment

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

The Institute for Nanomaterials, Advanced Technologies and Innovations of the Technical University of Liberec, also known as CXI TUL, was founded in 2009. Our mission is to support TUL's long-term vision of collaboration with industry and innovation.

CXI TUL

Agilent Technologies ISIS module for ICP-MS (G8411-68102) (New)

The ISIS 3 (Integrated Sample Introduction System) is an accessory designed for Agilent ICP‑MS systems—specifically the 7700, 7800, 7900, and 8900 models. 

Marketplace products from category ICP/MS accessories in condition new from Agilent Technologies - page 1

Related content

Setting Target Measurement Uncertainty

Development of a Flow-through Cell for Ultrasonic Extraction (UE)─Single Particle (SP)─ICP-MS─an Approach for Nano/Microparticle Elemental and Isotopic Analysis

Science on the Front Lines: Cleanup of a Benzene Spill